arXiv subjects

Joseph M. Brader

Publications and source records attributed to Joseph M. Brader.

At least 19 recordsLinked to original sources

arXiv2025

Confined active particles with spatially dependent Lorentz force: an odd twist to the "best Fokker-Planck approximation"

We derive a version of the so-called "best Fokker-Planck approximation" (BFPA) to describe the spatial properties of interacting active Ornstein-Uhlenbeck particles (AOUPs) in arbitrary spatial dimensions. In doing so, we also take into account the odd-diffusive contribution of the Lorentz force acting on a charged particle in a spatially dependent magnetic field, sticking to the overdamped limit. While the BFPA itself does not turn out to be widely useful, our general approach allows to deduce an appropriate generalization of the Fox approximation, which we use to characterize the stationary behavior of a single active particle in an external potential by deriving analytic expressions for configurational probability distributions (or effective potentials). In agreement with computer simulations, our theory predicts that the Lorentz force reduces the effective attraction and thus the probability to find an active particle in the vicinity of a repulsive wall. Even for an inhomogeneous magnetic field, our theoretical findings provide useful qualitative insights, specifically regarding the location of accumulation regions.

cond-mat.soft↗

arXiv2021

Order-preserving dynamics in one dimension -- single-file diffusion and caging from the perspective of dynamical density functional theory

Dynamical density functional theory (DDFT) is a powerful variational framework to study the nonequilibrium properties of colloids by only considering a time-dependent one-body number density. Despite the large number of recent successes, properly modeling the long-time dynamics in interacting systems within DDFT remains a notoriously difficult problem, since structural information, accounting for temporary or permanent particle cages, gets lost. Here we address such a caging scenario by reducing it to a clean one-dimensional problem, where the particles are naturally ordered (arranged on a line) by perfect cages created by their two next neighbors. In particular, we construct a DDFT approximation based on an equilibrium system with an asymmetric pair potential, such that the corresponding one-body densities still carry the footprint of particle order. Applied to a system of confined hard rods, this order-preserving dynamics (OPD) yields exact results at the system boundaries, in addition to the imprinted correct long-time behavior of density profiles representing individual particles. In an open system, our approach correctly reproduces the reduced long-time diffusion coefficient and subdiffusion, characteristic for a single-file setup. These observations cannot be made using current forms of DDFT without particle order.

cond-mat.soft↗

arXiv2020

Particle-conserving dynamics on the single-particle level

We generalize the particle-conserving dynamics method of de las Heras et al. [J. Phys. Condens. Matter: 28, 24404 (2016).] to binary mixtures and apply this to hard rods in one dimension. Considering the case of one species consisting of only one particle enables us to address the tagged-particle dynamics. The time-evolution of the species-labeled density profiles is compared to exact Brownian dynamics and (grand-canonical) dynamical density functional theory. The particle conserving dynamics yields improved results over the dynamical density functional theory and well reproduces the simulation data at short and intermediate times. However, the neglect of a strict particle order (due to the fundamental statistical assumption of ergodicity) leads to errors at long times for our one-dimensional setup. The isolated study of that error makes clear the fundamental limitations of (adiabatic) density-based theoretical approaches when applied to systems of any dimension for which particle caging is a dominant physical mechanism.

cond-mat.soft↗

arXiv2019

Pressure, surface tension and curvature in active systems: A touch of equilibrium

We explore the pressure of active particles on curved surfaces and its relation to other interfacial properties. We use both direct simulations of the active systems as well as simulations of an equilibrium system with effective (pair) interactions designed to capture the effects of activity. Comparing the active and effective passive systems in terms of their bulk pressure, we elaborate that the most useful theoretical route to this quantity is via the density profile at a flat wall. This is corroborated by extending the study to curved surfaces and establishing a connection to the particle adsorption and integrated surface excess pressure (surface tension). In the ideal-gas limit, the effect of curvature on the mechanical properties can be calculated analytically in the passive system with effective interactions, and shows good (but not exact) agreement with simulations of the active models. It turns out that even the linear correction to the pressure is model specific and equals the planar adsorption in each case, which means that a known equilibrium sum rule can be extended to a regime at small but nonzero activity. In turn, the relation between the planar adsorption and the surface tension is reminiscent of the Gibbs adsorption theorem at an effective temperature. At finite densities, where particle interactions play a role, the presented effective-potential approximation captures the effect of density on the dependence of the pressure on curvature.

cond-mat.soft↗

arXiv2018

Isotropic-nematic transition of self-propelled rods in three dimensions

Using overdamped Brownian dynamics simulations we investigate the isotropic-nematic (IN) transition of self-propelled rods in three spatial dimensions. For two well-known model systems (Gay-Berne potential and hard spherocylinders) we find that turning on activity moves to higher densities the phase boundary separating an isotropic phase from a (nonpolar) nematic phase. This active IN phase boundary is distinct from the boundary between isotropic and polar-cluster states previously reported in two-dimensional simulation studies and, unlike the latter, is not sensitive to the system size. We thus identify a generic feature of anisotropic active particles in three dimensions.

cond-mat.soft↗

arXiv2018

Effective equilibrium states in mixtures of active particles driven by colored noise

We consider the steady-state behavior of pairs of active particles having different persistence times and diffusivities. To this purpose we employ the active Ornstein-Uhlenbeck model, where the particles are driven by colored noises with exponential correlation functions whose intensities and correlation times vary from species to species. By extending Fox's theory to many components, we derive by functional calculus an approximate Fokker-Planck equation for the configurational distribution function of the system. After illustrating the predicted distribution in the solvable case of two particles interacting via a harmonic potential, we consider systems of particles repelling through inverse power laws potentials. We compare the analytic predictions to computer simulations for such soft-repulsive interactions in one dimension, and show that at linear order in the persistence times the theory is satisfactory. This work provides the toolbox to qualitatively describe many-body phenomena, such as demixing and depletion, by means of effective pair potentials.

cond-mat.soft↗

arXiv2017

Effective equilibrium states in the colored-noise model for active matter I. Pairwise forces in the Fox and unified colored noise approximations

The equations of motion of active systems can be modeled in terms of Ornstein-Uhlenbeck processes (OUPs) with appropriate correlators. For further theoretical studies, these should be approximated to yield a Markovian picture for the dynamics and a simplified steady-state condition. We perform a comparative study of the Unified Colored Noise Approximation (UCNA) and the approximation scheme by Fox recently employed within this context. We review the approximations necessary to define effective interaction potentials in the low-density limit and study the conditions for which these represent the behavior observed in two-body simulations for the OUPs model and Active Brownian particles. The demonstrated limitations of the theory for potentials with a negative slope or curvature can be qualitatively corrected by a new empirical modification. In general, we find that in the presence of translational white noise the Fox approach is more accurate. Finally, we examine an alternative way to define a force-balance condition in the limit of small activity.

cond-mat.soft↗

arXiv2017

Effective equilibrium states in the colored-noise model for active matter II. A unified framework for phase equilibria, structure and mechanical properties

Active particles driven by colored noise can be approximately mapped onto a system that obeys detailed balance. The effective interactions which can be derived for such a system allow to describe the structure and phase behavior of the active fluid by means of an effective free energy. In this paper we explain why the related thermodynamic results for pressure and interfacial tension do not represent the results one would measure mechanically. We derive a dynamical density functional theory, which in the steady state simultaneously validates the use of effective interactions and provides access to mechanical quantities. Our calculations suggest that in the colored-noise model the mechanical pressure in coexisting phases might be unequal and the interfacial tension can become negative.

cond-mat.soft↗

arXiv2017

Dynamical density functional theory analysis of the laning instability in sheared soft matter

Using dynamical density functional theory (DDFT) methods we investigate the laning instability of a sheared colloidal suspension. The nonequilibrium ordering at the laning transition is driven by non-affine particle motion arising from interparticle interactions. Starting from a DDFT which incorporates the non-affine motion, we perform a linear stability analysis that enables identification of the regions of parameter space where lanes form. We illustrate our general approach by applying it to a simple one-component fluid of soft penetrable particles.

cond-mat.soft↗

arXiv2017

Flow induced crystallization of penetrable particles

For a system of Brownian particles interacting via a soft exponential potential we investigate the interaction between equilibrium crystallization and spatially varying shear flow. For thermodynamic state points within the liquid part of the phase diagram, but close to the crystallization phase boundary, we observe that imposing a Poiseuille flow can induce nonequilibrium crystalline ordering in regions of low shear gradient. The physical mechanism responsible for this phenomenon is shear induced particle migration, which causes particles to drift preferentially towards the center of the flow channel, thus increasing the local density in the channel center. The method employed is classical dynamical density functional theory.

cond-mat.soft↗

arXiv2017

Active Brownian particles at interfaces: An effective equilibrium approach

A simple theoretical approach is used to investigate active colloids at the free interface and near repulsive substrates. We employ dynamical density functional theory to determine the steady-state density profiles in an effective equilibrium system [Farage et al., Phys. Rev. E, 91 (2015) 042310]. In addition to the known accumulation at surfaces, we predict wetting and drying transitions at a flat repulsive wall and capillary condensation and evaporation in a slit pore. These new phenomena are closely related to the motility-induced phase separation (MIPS) in the bulk.

cond-mat.soft↗

arXiv2016

Nonequilibrium phase behaviour from minimization of free power dissipation

We develop a general theory for describing phase coexistence between nonequilibrium steady states in Brownian systems, based on power functional theory (M. Schmidt and J.M. Brader, J. Chem. Phys. 138, 214101 (2013)). We apply the framework to the special case of fluid-fluid phase separation of active soft sphere swimmers. The central object of the theory, the dissipated free power, is calculated via computer simulations and compared to a simple analytical approximation. The theory describes well the simulation data and predicts motility-induced phase separation due to avoidance of dissipative clusters.

cond-mat.soft↗

arXiv2016

Phase separation on the sphere: Patchy particles and self-assembly

Motivated by observations of heterogeneous domain structure on the surface of cells, we consider a minimal model to describe the dynamics of phase separation on the surface of a spherical particle. Finite-size effects on the curved particle surface lead to the formation of long-lived, metastable states for which the density is distributed in patches over the particle surface. We study the time evolution and stability of these states as a function of both the particle size and the thermodynamic parameters. Finally, by connecting our findings with studies of patchy particles, we consider the implications for self-assembly in many-particle systems.

cond-mat.soft↗

arXiv2016

Particle Conservation in Dynamical Density Functional Theory

We present the exact adiabatic theory for the dynamics of the inhomogeneous density distribution of a classical fluid. Erroneous particle number fluctuations of dynamical density functional theory are absent, both for canonical and grand canonical initial conditions. We obtain the canonical free energy functional, which yields the adiabatic interparticle forces of overdamped Brownian motion. Using an exact and one of the most advanced approximate hard core free energy functionals, we obtain excellent agreement with simulations. The theory applies to finite systems in and out of equilibrium.

cond-mat.soft↗

arXiv2014

Superadiabatic forces in Brownian many-body dynamics

Theoretical approaches to nonequilibrium many-body dynamics generally rest upon an adiabatic assumption, whereby the true dynamics is represented as a sequence of equilibrium states. Going beyond this simple approximation is a notoriously difficult problem. For the case of classical Brownian many-body dynamics we present a simulation method that allows to isolate and precisely evaluate superadiabatic correlations and the resulting forces. Application of the method to a system of one-dimensional hard particles reveals the importance for the dynamics, as well as the complexity, of these nontrivial out-of-equilibrium contributions. Our findings help clarify the status of dynamical density functional theory and provide a rational basis for the development of improved theories.

cond-mat.soft↗

arXiv2014

Dynamic correlations in Brownian many-body systems

For classical Brownian systems driven out of equilibrium we derive inhomogeneous two-time correlation functions from functional differentiation of the one-body density and current with respect to external fields. In order to allow for appropriate freedom upon building the derivatives, we formally supplement the Smoluchowski dynamics by a source term, which vanishes at the physical solution. These techniques are applied to obtain a complete set of dynamic Ornstein-Zernike equations, which serve for the development of approximation schemes. The rules of functional calculus lead naturally to non-Markovian equations of motion for the two-time correlators. Memory functions are identified as functional derivatives of a unique space- and time-nonlocal dissipation power functional.

cond-mat.soft↗

arXiv2013

Nonequilibrium Ornstein-Zernike relation for Brownian many-body dynamics

We derive a dynamic Ornstein-Zernike equation for classical fluids undergoing overdamped Brownian motion and driven out of equilibrium. Inhomogeneous two-time correlation functions are obtained from functional differentiation of the one-body density and current with respect to an appropriately chosen external field. Functional calculus leads naturally to non-Markovian equations of motion for the two-time correlators. Memory functions are identified as functional derivatives of a space- and time-nonlocal power dissipation functional. We propose an excess (over ideal gas) dissipation functional that both generates mode-coupling theory for the two-body correlations and extends dynamical density functional theory for the one-body fields, thus unifying the two approaches.

cond-mat.soft↗

arXiv2013

Power functional theory for Brownian dynamics

Classical density functional theory (DFT) provides an exact variational framework for determining the equilibrium properties of inhomogeneous fluids. We report a generalization of DFT to treat the non-equilibrium dynamics of classical many-body systems subject to Brownian dynamics. Our approach is based upon a dynamical functional consisting of reversible free energy changes and irreversible power dissipation. Minimization of this `free power' functional with respect to the microscopic one-body current yields a closed equation of motion. In the equililibrium limit the theory recovers the standard variational principle of DFT. The adiabatic dynamical density functional theory is obtained when approximating the power dissipation functional by that of an ideal gas. Approximations to the excess (over ideal) power dissipation yield numerically tractable equations of motion beyond the adiabatic approximation, opening the door to the systematic study of systems far from equilibrium.

cond-mat.soft↗