arXiv subjects

Joseph Pollard

Publications and source records attributed to Joseph Pollard.

12 recordsLinked to original sources

arXiv2026

Defect Kinematics in 2D Nematics: Contributions from Surface Topology, Intrinsic and Extrinsic Geometry, Solitons, Defect Orientations, and Elastic Anisotropy

We characterise the particlelike kinematics of charge-carrying topological defects in nematic media via a geometric field theory. This differs from the theory of electromagnetism, with which it is often compared, due to the absence of gauge-invariance. In both approaches, basic defect interactions are governed by a propagator, which depends upon the global topology and/or intrinsic geometry of the surface. For nematic materials, however, the minimisation of the free energy is sensitive to constraints that a gauge invariant theory would otherwise be indifferent to. Hodge theory is used to capture these as `harmonic' excitations, unifying two factors known to additionally affect the kinematics of defects in nematics: relative defect orientations and topological solitons. Perturbations to the form of the energy are also permitted in nematic materials due to gauge \emph{non}invariance. Those that introduce non-linearities in the corresponding Euler--Lagrange equations are shown to result in defect interactions that go beyond pairwise despite the otherwise abelian nature of the underlying U(1) symmetry. We show how this type of induced many-body effect manifests in the cases of non-zero extrinsic curvature and/or elastic anisotropy.

cond-mat.soft↗

arXiv2025

Geometric Frustration in Twist-Bend Nematic Droplets

Liquid crystals formed of bent-core molecules are exotic materials that exhibit the twist-bend nematic phase. This arises when an energetic preference for nonzero local bend distortion is accommodated via twist in the texture, resulting in properties synonymous with both smectics and cholesterics. Here we describe how the frustration inherent to the twist-bend phase can be exacerbated by confinement and boundary anchoring. Using a combination of numerical simulations, topological and geometric analysis, we catalogue the equilibrium textures that arise in spherical twist-bend droplets with a radial anchoring as the two key parameters -- the molecular cone angle and the ratio between the pitch length and droplet radius -- are varied. This form of confinement is known to produce a wide variety of topologically and geometrically complex metastable states in cholesterics. We find that twist-bend nematic droplets are no different, exhibiting a variety of complex layered states, defect constellations, and Hopfions. However, whilst many of the structures and defect configurations that we observe are equivalent to their cholesteric counterparts, they are geometrically very distinct, in part due to the absence of chirality.

cond-mat.soft↗

arXiv2024

Defect Dynamics in Cholesterics: Beyond the Peach-Koehler Force

The Peach-Koehler force between disclination lines was originally formulated in the study of crystalline solids, and has since been adopted to provide a notion of interactions between disclination lines in nematic liquid crystals. Here, we argue that the standard formulation of this interaction force seemingly fails for materials where there is a symmetry-broken ground state, and suggest that this is due to the interaction between disclination lines and merons: non-singular yet non-trivial topological solitons. We examine this in the context of chiral nematic (cholesteric) liquid crystals, which provide a natural setting for studying these interactions due to their energetic preference for meron tubes in the form of double-twist cylinders. Through a combination of theory and simulation we demonstrate that, for sufficiently strong chirality, defects of $+1/2$ winding will change their winding through the emission of a meron line, and that interactions between the merons and defects dominate over defect-defect interactions. Instead of Peach-Koehler framework, we employ a method based on contact topology - the Gray stability theorem - to directly calculate the velocity field of the material. We apply our framework to point defects as well as disclination lines. Our results have implications not just for chiral materials, but also for other phases with modulated ground states, such as the twist-bend and splay-bend nematics.

cond-mat.soft↗

arXiv2024

Morse Theory and Meron Mediated Interactions Between Disclination Lines in Nematics

The topological understanding of nematic liquid crystals is traditionally centered on singularities, or defects, and their classification via homotopy theory. However, this approach has ultimately proved insufficient to properly capture a range of complex behaviours that have been reported in three dimensions. To address this, we argue that a finer understanding of topology is required, in which non-singular but non-trivial topological solitons - so-called merons - play a central role in mediating interactions between disclination lines. We present a comprehensive framework for capturing such behaviour that draws heavily on aspects of Morse theory; the key notion being that merons appear singular under projection onto a two-dimensional surface. This permits the use of singularity theory and dividing curves to characterise nematic textures via tomography, as well as an understanding of topological transitions via surgery theory. We use our ideas to understand and classify complex three-dimensional behaviours, such as the linking, rewiring and crossing of disclination lines, as well as to provide a new perspective on defect charge.

cond-mat.soft↗

arXiv2024

Gauge Freedom and Objective Rates in the Morphodynamics of Fluid Deformable Surfaces: the Jaumann Rate vs. the Material Derivative

Morphodynamic descriptions of fluid deformable surfaces are relevant for a range of biological and soft matter phenomena, spanning materials that can be passive or active, as well as ordered or topological. However, a principled, geometric formulation of the correct hydrodynamic equations has remained opaque, with objective rates proving a central, contentious issue. We argue that this is due to a conflation of several important notions that must be disambiguated when describing fluid deformable surfaces. These are the Eulerian and Lagrangian perspectives on fluid motion, and three different types of gauge freedom: in the ambient space; in the parameterisation of the surface, and; in the choice of frame field on the surface. We clarify these ideas, and show that objective rates in fluid deformable surfaces are time derivatives that are invariant under the first of these gauge freedoms, and which also preserve the structure of the ambient metric. The latter condition reduces a potentially infinite number of possible objective rates to only two: the material derivative and the Jaumann rate. The material derivative is invariant under the Galilean group, and therefore applies to velocities, whose rate captures the conservation of momentum. The Jaumann derivative is invariant under all time-dependent isometries, and therefore applies to local order parameters, or symmetry-broken variables, such as the nematic $Q$-tensor. We provide examples of material and Jaumann rates in two different frame fields that are pertinent to the current applications of the fluid mechanics of deformable surfaces.

physics.flu-dyn↗

arXiv2024

Escape into the Third Dimension in Cholesteric Liquid Crystals

Integer winding disclinations are unstable in a nematic and are removed by an `escape into the third dimension', resulting in a non-singular texture. This process is frustrated in a cholesteric material due to the requirement of maintaining a uniform handedness and instead results in the formation of strings of point defects, as well as complex three-dimensional solitons such as heliknotons that consist of linked dislocations. We give a complete description of this frustration using methods of contact topology. Furthermore, we describe how this frustration can be exploited to stabilise regions of the material where the handedness differs from the preferred handedness. These `twist solitons' are stable in numerical simulation and are a new form of topological defect in cholesteric materials that have not previously been studied.

cond-mat.soft↗

arXiv2022

Contact Topology and the Classification of Disclination Lines in Cholesteric Liquid Crystals

We give a topological classification of defect lines in cholesteric liquid crystals using methods from contact topology. By focusing on the role played by the chirality of the material, we demonstrate a fundamental distinction between `tight' and `overtwisted' disclination lines not detected by standard homotopy theory arguments. The classification of overtwisted lines is the same as nematics, however, we show that tight disclinations possess a topological layer number that is conserved as long as the twist is nonvanishing. Finally, we observe that chirality frustrates the escape of removable defect lines, and explain how this frustration underlies the formation of several structures observed in experiments.

cond-mat.soft↗

arXiv2021

Yielding, shear banding and brittle failure of amorphous materials

Widespread processes in nature and technology are governed by the dynamical transition whereby a material in an initially solid-like state then yields plastically. Major unresolved questions concern whether any material will yield smoothly and gradually (ductile behaviour) or fail abruptly and catastrophically (brittle behaviour); the roles of sample annealing, disorder and shear band formation in the onset of yielding and failure; and, most importantly from a practical viewpoint, whether any impending catastrophic failure can be anticipated before it happens. We address these questions by studying the yielding of slowly sheared athermal amorphous materials, within a minimal mesoscopic lattice elastoplastic model. Our contributions are fourfold. First, we elucidate whether yielding will be ductile or brittle, for any given level of sample annealing. Second, we show that yielding comprises two distinct stages: a pre-failure stage, in which small levels of strain heterogeneity slowly accumulate, followed by a catastrophic brittle failure event, in which a crack quickly propagates across the sample via a cooperating line of plastic events. Third, we provide an expression for the slowly growing level of strain heterogeneity in the pre-failure stage, expressed in terms of the macroscopic stress-strain curve and the sample size, and in excellent agreement with our simulation results. Fourth, we elucidate the basic mechanism via which a crack then nucleates and provide an approximate expression for the probability distribution of shear strains at which failure occurs, as determined by the disorder inherent in the sample, expressed in terms of a single annealing parameter, and the system size.

cond-mat.stat-mech↗

arXiv2021

Intrinsic Geometry and Director Reconstruction for Three-Dimensional Liquid Crystals

We give a description of the intrinsic geometry of elastic distortions in three-dimensional nematic liquid crystals and establish necessary and sufficient conditions for a set of functions to represent these distortions by describing how they couple to the curvature tensor. We demonstrate that, in contrast to the situation in two dimensions, the first-order gradients of the director alone are not sufficient for full reconstruction of the director field from its intrinsic geometry: it is necessary to provide additional information about the second-order director gradients. We describe several different methods by which the director field may be reconstructed from its intrinsic geometry. Finally, we discuss the coupling between individual distortions and curvature from the perspective of Lie algebras and groups and describe homogeneous spaces on which pure modes of distortion can be realised.

cond-mat.soft↗

arXiv2020

Geometry of Bend: Singular Lines and Defects in Twist-Bend Nematics

We describe the geometry of bend distortions in twist-bend nematic liquid crystals in terms of their fundamental degeneracies, which we call $\beta$ lines. These represent a new class of line-like topological defect. We use them to construct and characterise novel structures, including grain boundary and focal conic smectic-like defects, Skyrmions, and knotted merons. We analyse their local geometry and global structure, showing that their intersection with any surface is twice the Skyrmion number. Finally, we demonstrate how arbitrary knots and links can be created and describe them in terms of merons, giving a new geometric perspective on the fractionalisation of Skyrmions.

cond-mat.soft↗

arXiv2019

Singular Contact Geometry and Beltrami Fields in Cholesteric Liquid Crystals

The description of point defects in chiral liquid crystals via topological methods requires the introduction of singular contact structures, a generalisation of regular contact structures where the plane field may have singularities at isolated points. We characterise the class of singularities that may arise in such structures, as well as the subclass of singularities that can occur in a Beltrami field. We discuss questions of global existence, and prove that all singular contact structures with nonremovable singularities are overtwisted. To connect the theory to experiment we also discuss normal and tangential boundary conditions for singular contact structures, and show we can realise all desired boundary conditions except for normal anchoring on a sphere, where a theorem of Eliashberg and Thurston provides an obstruction to having a singular contact structure in the interior. By introducing a singular version of the Lutz twist we show that all contact structures are homotopic within the larger class of singular contact structures. We give applications of our results to the description of topological defects in chiral liquid crystals.

math.SG↗

arXiv2018

Point Defects, Chirality and Singularity Theory in Cholesteric Liquid Crystal Droplets

We develop a theory of point defects in cholesterics and textures in spherical droplets with normal anchoring. The local structure of chiral defects is described by singularity theory and a smectic-like gradient field establishing a nexus between cholesterics and smectics mediated by their defects. We identify the defects of degree $-2$ and $-3$ observed experimentally with the singularities $D_4^{-}$ and $T_{4,4,4}$, respectively. Radial point defects typical of nematics cannot be perturbed into chiral structures with a single handedness by general topological considerations. For the same reasons, the spherical surface frustrates the chirality in a surface boundary layer containing regions of both handedness.

cond-mat.soft↗