Searcharxiv⌕ Search

arXiv subjects

Joseph R. Cavallaro

Publications and source records attributed to Joseph R. Cavallaro.

14 recordsLinked to original sources

Design Trade-offs for Decentralized Baseband Processing in Massive MU-MIMO Systems

Massive multi-user (MU) multiple-input multiple-output (MIMO) provides high spectral efficiency by means of spatial multiplexing and fine-grained beamforming. However, conventional base-station (BS) architectures for systems with hundreds of antennas that rely on centralized baseband processing inevitably suffer from (i) excessive interconnect data rates between radio-frequency circuitry and processing fabrics, and (ii) prohibitive complexity at the centralized baseband processor. Recently, decentralized baseband processing (DBP) architectures and algorithms have been proposed, which mitigate the interconnect bandwidth and complexity bottlenecks. This paper systematically explores the design trade-offs between error-rate performance, computational complexity, and data transfer latency of DBP architectures under different system configurations and channel conditions. Considering architecture, algorithm, and numerical precision aspects, we provide practical guidelines to select the DBP architecture and algorithm that are able to realize the full benefits of massive MU-MIMO in the uplink and downlink.

cs.IT↗

Design and Implementation of a Neural Network Based Predistorter for Enhanced Mobile Broadband

Digital predistortion is the process of correcting for nonlinearities in the analog RF front-end of a wireless transmitter. These nonlinearities contribute to adjacent channel leakage, degrade the error vector magnitude of transmitted signals, and often force the transmitter to reduce its transmission power into a more linear but less power-efficient region of the device. Most predistortion techniques are based on polynomial models with an indirect learning architecture which have been shown to be overly sensitive to noise. In this work, we use neural network based predistortion with a novel neural network training method that avoids the indirect learning architecture and that shows significant improvements in both the adjacent channel leakage ratio and error vector magnitude. Moreover, we show that, by using a neural network based predistorter, we are able to achieve a 42% reduction in latency and 9.6% increase in throughput on an FPGA accelerator with 15% fewer multiplications per sample when compared to a similarly performing memory-polynomial implementation.

eess.SP↗

Decentralized Equalization with Feedforward Architectures for Massive MU-MIMO

Linear data-detection algorithms that build on zero forcing (ZF) or linear minimum mean-square error (L-MMSE) equalization achieve near-optimal spectral efficiency in massive multi-user multiple-input multiple-output (MU-MIMO) systems. Such algorithms, however, typically rely on centralized processing at the base-station (BS) which results in (i) excessive interconnect and chip input/output (I/O) data rates and (ii) high computational complexity. Decentralized baseband processing (DBP) partitions the BS antenna array into independent clusters that are associated with separate radio-frequency circuitry and computing fabrics in order to overcome the limitations of centralized processing. In this paper, we investigate decentralized equalization with feedforward architectures that minimize the latency bottlenecks of existing DBP solutions. We propose two distinct architectures with different interconnect and I/O bandwidth requirements that fuse the local equalization results of each cluster in a feedforward network. For both architectures, we consider maximum ratio combining, ZF, L-MMSE, and a nonlinear equalization algorithm that relies on approximate message passing, and we analyze the associated post-equalization signal-to-noise-and-interference-ratio (SINR). We provide reference implementation results on a multi graphics processing unit (GPU) system which demonstrate that decentralized equalization with feedforward architectures enables throughputs in the Gb/s regime and incurs no or only a small performance loss compared to centralized solutions.

cs.IT↗

Decentralized Coordinate-Descent Data Detection and Precoding for Massive MU-MIMO

Massive multiuser (MU) multiple-input multiple-output (MIMO) promises significant improvements in spectral efficiency compared to small-scale MIMO. Typical massive MU-MIMO base-station (BS) designs rely on centralized linear data detectors and precoders which entail excessively high complexity, interconnect data rates, and chip input/output (I/O) bandwidth when executed on a single computing fabric. To resolve these complexity and bandwidth bottlenecks, we propose new decentralized algorithms for data detection and precoding that use coordinate descent. Our methods parallelize computations across multiple computing fabrics, while minimizing interconnect and I/O bandwidth. The proposed decentralized algorithms achieve near-optimal error-rate performance and multi-Gbps throughput at sub-1 ms latency when implemented on a multi-GPU cluster with half-precision floating-point arithmetic.

cs.DC↗

Feedforward Architectures for Decentralized Precoding in Massive MU-MIMO Systems

Massive multi-user multiple-input multiple-output (MU-MIMO) enables significant gains in spectral efficiency and link reliability compared to conventional small-scale MIMO technology. Furthermore, linear precoders, e.g., using zero forcing or Wiener filter (WF) precoding, are sufficient to achieve excellent error-rate performance in the massive MU-MIMO downlink. However, these methods necessitate centralized processing at the base-station (BS), which causes (i) excessively high interconnect and chip input/output data rates, and (ii) high implementation complexity. We propose two feedforward architectures and corresponding decentralized WF precoders that parallelize precoding across multiple computing fabrics, effectively mitigating the issues of centralized approaches. To demonstrate the efficacy of our decentralized precoders, we provide implementation results on a multi-GPU system, which show that our solutions achieve throughputs in the Gbit/s regime while achieving (near-)optimal error-rate performance in the massive MU-MIMO downlink.

cs.IT↗

Decentralized Baseband Processing for Massive MU-MIMO Systems

Achieving high spectral efficiency in realistic massive multi-user (MU) multiple-input multiple-output (MIMO) wireless systems requires computationally-complex algorithms for data detection in the uplink (users transmit to base-station) and beamforming in the downlink (base-station transmits to users). Most existing algorithms are designed to be executed on centralized computing hardware at the base-station (BS), which results in prohibitive complexity for systems with hundreds or thousands of antennas and generates raw baseband data rates that exceed the limits of current interconnect technology and chip I/O interfaces. This paper proposes a novel decentralized baseband processing architecture that alleviates these bottlenecks by partitioning the BS antenna array into clusters, each associated with independent radio-frequency chains, analog and digital modulation circuitry, and computing hardware. For this architecture, we develop novel decentralized data detection and beamforming algorithms that only access local channel-state information and require low communication bandwidth among the clusters. We study the associated trade-offs between error-rate performance, computational complexity, and interconnect bandwidth, and we demonstrate the scalability of our solutions for massive MU-MIMO systems with thousands of BS antennas using reference implementations on a graphic processing unit (GPU) cluster.

cs.IT↗

On the Achievable Rates of Decentralized Equalization in Massive MU-MIMO Systems

Massive multi-user (MU) multiple-input multiple-output (MIMO) promises significant gains in spectral efficiency compared to traditional, small-scale MIMO technology. Linear equalization algorithms, such as zero forcing (ZF) or minimum mean-square error (MMSE)-based methods, typically rely on centralized processing at the base station (BS), which results in (i) excessively high interconnect and chip input/output data rates, and (ii) high computational complexity. In this paper, we investigate the achievable rates of decentralized equalization that mitigates both of these issues. We consider two distinct BS architectures that partition the antenna array into clusters, each associated with independent radio-frequency chains and signal processing hardware, and the results of each cluster are fused in a feedforward network. For both architectures, we consider ZF, MMSE, and a novel, non-linear equalization algorithm that builds upon approximate message passing (AMP), and we theoretically analyze the achievable rates of these methods. Our results demonstrate that decentralized equalization with our AMP-based methods incurs no or only a negligible loss in terms of achievable rates compared to that of centralized solutions.

cs.IT↗

Parallel Digital Predistortion Design on Mobile GPU and Embedded Multicore CPU for Mobile Transmitters

Digital predistortion (DPD) is a widely adopted baseband processing technique in current radio transmitters. While DPD can effectively suppress unwanted spurious spectrum emissions stemming from imperfections of analog RF and baseband electronics, it also introduces extra processing complexity and poses challenges on efficient and flexible implementations, especially for mobile cellular transmitters, considering their limited computing power compared to basestations. In this paper, we present high data rate implementations of broadband DPD on modern embedded processors, such as mobile GPU and multicore CPU, by taking advantage of emerging parallel computing techniques for exploiting their computing resources. We further verify the suppression effect of DPD experimentally on real radio hardware platforms. Performance evaluation results of our DPD design demonstrate the high efficacy of modern general purpose mobile processors on accelerating DPD processing for a mobile transmitter.

cs.DC↗

High-Throughput Data Detection for Massive MU-MIMO-OFDM using Coordinate Descent

Data detection in massive multi-user (MU) multiple-input multiple-output (MIMO) wireless systems is among the most critical tasks due to the excessively high implementation complexity. In this paper, we propose a novel, equalization-based soft-output data-detection algorithm and corresponding reference FPGA designs for wideband massive MU-MIMO systems that use orthogonal frequency-division multiplexing (OFDM). Our data-detection algorithm performs approximate minimum mean-square error (MMSE) or box-constrained equalization using coordinate descent. We deploy a variety of algorithm-level optimizations that enable near-optimal error-rate performance at low implementation complexity, even for systems with hundreds of base-station (BS) antennas and thousands of subcarriers. We design a parallel VLSI architecture that uses pipeline interleaving and can be parametrized at design time to support various antenna configurations. We develop reference FPGA designs for massive MU-MIMO-OFDM systems and provide an extensive comparison to existing designs in terms of implementation complexity, throughput, and error-rate performance. For a 128 BS antenna, 8 user massive MU-MIMO-OFDM system, our FPGA design outperforms the next-best implementation by more than 2.6x in terms of throughput per FPGA look-up tables.

cs.IT↗

Low-Complexity Sub-band Digital Predistortion for Spurious Emission Suppression in Noncontiguous Spectrum Access

Noncontiguous transmission schemes combined with high power-efficiency requirements pose big challenges for radio transmitter and power amplifier (PA) design and implementation. Due to the nonlinear nature of the PA, severe unwanted emissions can occur, which can potentially interfere with neighboring channel signals or even desensitize the own receiver in frequency division duplexing (FDD) transceivers. In this article, to suppress such unwanted emissions, a low-complexity sub-band DPD solution, specifically tailored for spectrally noncontiguous transmission schemes in low-cost devices, is proposed. The proposed technique aims at mitigating only the selected spurious intermodulation distortion components at the PA output, hence allowing for substantially reduced processing complexity compared to classical linearization solutions. Furthermore, novel decorrelation based parameter learning solutions are also proposed and formulated, which offer reduced computing complexity in parameter estimation as well as the ability to track time-varying features adaptively. Comprehensive simulation and RF measurement results are provided, using a commercial LTE-Advanced mobile PA, to evaluate and validate the effectiveness of the proposed solution in real world scenarios. The obtained results demonstrate that highly efficient spurious component suppression can be obtained using the proposed solutions.

cs.IT↗

Conjugate Gradient-based Soft-Output Detection and Precoding in Massive MIMO Systems

Massive multiple-input multiple-output (MIMO) promises improved spectral efficiency, coverage, and range, compared to conventional (small-scale) MIMO wireless systems. Unfortunately, these benefits come at the cost of significantly increased computational complexity, especially for systems with realistic antenna configurations. To reduce the complexity of data detection (in the uplink) and precoding (in the downlink) in massive MIMO systems, we propose to use conjugate gradient (CG) methods. While precoding using CG is rather straightforward, soft-output minimum mean-square error (MMSE) detection requires the computation of the post-equalization signal-to-interference-and-noise-ratio (SINR). To enable CG for soft-output detection, we propose a novel way of computing the SINR directly within the CG algorithm at low complexity. We investigate the performance/complexity trade-offs associated with CG-based soft-output detection and precoding, and we compare it to exact and approximate methods. Our results reveal that the proposed method outperforms existing algorithms for massive MIMO systems with realistic antenna configurations.

cs.IT↗

Parallel Interleaver Design for a High Throughput HSPA+/LTE Multi-Standard Turbo Decoder

To meet the evolving data rate requirements of emerging wireless communication technologies, many parallel architectures have been proposed to implement high throughput turbo decoders. However, concurrent memory reading/writing in parallel turbo decoding architectures leads to severe memory conflict problem, which has become a major bottleneck for high throughput turbo decoders. In this paper, we propose a flexible and efficient VLSI architecture to solve the memory conflict problem for highly parallel turbo decoders targeting multi-standard 3G/4G wireless communication systems. To demonstrate the effectiveness of the proposed parallel interleaver architecture, we implemented an HSPA+/LTE/LTE-Advanced multi-standard turbo decoder with a 45nm CMOS technology. The implemented turbo decoder consists of 16 Radix-4 MAP decoder cores, and the chip core area is 2.43 mm^2. When clocked at 600 MHz, this turbo decoder can achieve a maximum decoding throughput of 826 Mbps in the HSPA+ mode and 1.67 Gbps in the LTE/LTE-Advanced mode, exceeding the peak data rate requirements for both standards.

cs.IT↗

Large-Scale MIMO Detection for 3GPP LTE: Algorithms and FPGA Implementations

Large-scale (or massive) multiple-input multiple-output (MIMO) is expected to be one of the key technologies in next-generation multi-user cellular systems, based on the upcoming 3GPP LTE Release 12 standard, for example. In this work, we propose - to the best of our knowledge - the first VLSI design enabling high-throughput data detection in single-carrier frequency-division multiple access (SC-FDMA)-based large-scale MIMO systems. We propose a new approximate matrix inversion algorithm relying on a Neumann series expansion, which substantially reduces the complexity of linear data detection. We analyze the associated error, and we compare its performance and complexity to those of an exact linear detector. We present corresponding VLSI architectures, which perform exact and approximate soft-output detection for large-scale MIMO systems with various antenna/user configurations. Reference implementation results for a Xilinx Virtex-7 XC7VX980T FPGA show that our designs are able to achieve more than 600 Mb/s for a 128 antenna, 8 user 3GPP LTE-based large-scale MIMO system. We finally provide a performance/complexity trade-off comparison using the presented FPGA designs, which reveals that the detector circuit of choice is determined by the ratio between BS antennas and users, as well as the desired error-rate performance.

cs.IT↗

Computer Vision Accelerators for Mobile Systems based on OpenCL GPGPU Co-Processing

In this paper, we present an OpenCL-based heterogeneous implementation of a computer vision algorithm -- image inpainting-based object removal algorithm -- on mobile devices. To take advantage of the computation power of the mobile processor, the algorithm workflow is partitioned between the CPU and the GPU based on the profiling results on mobile devices, so that the computationally-intensive kernels are accelerated by the mobile GPGPU (general-purpose computing using graphics processing units). By exploring the implementation trade-offs and utilizing the proposed optimization strategies at different levels including algorithm optimization, parallelism optimization, and memory access optimization, we significantly speed up the algorithm with the CPU-GPU heterogeneous implementation, while preserving the quality of the output images. Experimental results show that heterogeneous computing based on GPGPU co-processing can significantly speed up the computer vision algorithms and makes them practical on real-world mobile devices.

cs.DC↗