arXiv subjects

Joseph R. Davidson

Publications and source records attributed to Joseph R. Davidson.

12 recordsLinked to original sources

arXiv2026

An analysis of sensor selection for fruit picking with suction-based grippers

Robotic fruit harvesting often fails to reliably detect whether a fruit has been successfully picked, limiting efficiency and increasing crop damage. This problem is difficult due to compliant fruit and grippers, variable stem attachment, and occlusions in orchard environments. Prior work has explored vision-based perception and multi-sensor learning approaches for pick state estimation. However, minimal sensor sets and phase-dependent sensing strategies for accurate pick and slip detection remain largely unexplored. In this work, we design and evaluate a multimodal sensing suite integrated into a compliant suction-based apple gripper. Our approach is unique because it identifies which sensors are most informative at different phases of the pick, enabling predictive detection of failures before they occur. The contributions of this paper are a phase-dependent evaluation of multimodal sensors and the identification of minimal sensor sets for reliable pick state classification. Experiments in a real apple orchard show that Random Forest and Multilayer Perceptron classifiers detect successful picks and impending failures with over 90% accuracy, and Random Forest predicts pick/slip events within 0.09 s of human-annotated ground truth.

cs.RO↗

arXiv2025

SeeTree -- A modular, open-source system for tree detection and orchard localization

Accurate localization is an important functional requirement for precision orchard management. However, there are few off-the-shelf commercial solutions available to growers. In this paper, we present SeeTree, a modular, open source embedded system for tree trunk detection and orchard localization that is deployable on any vehicle. Building on our prior work on vision-based in-row localization using particle filters, SeeTree includes several new capabilities. First, it provides capacity for full orchard localization including out-of-row headland turning. Second, it includes the flexibility to integrate either visual, GNSS, or wheel odometry in the motion model. During field experiments in a commercial orchard, the system converged to the correct location 99% of the time over 800 trials, even when starting with large uncertainty in the initial particle locations. When turning out of row, the system correctly tracked 99% of the turns (860 trials representing 43 unique row changes). To help support adoption and future research and development, we make our dataset, design files, and source code freely available to the community.

cs.CV↗

arXiv2025

Machine Vision-Based Assessment of Fall Color Changes and its Relationship with Leaf Nitrogen Concentration

Apple(\textit{Malus domestica} Borkh.) trees are deciduous, shedding leaves each year. This process is preceded by a gradual change in leaf color from green to yellow as chlorophyll is degraded prior to abscission. The initiation and rate of this color change are affected by many factors including leaf nitrogen (N) concentration. We predict that leaf color during this transition may be indicative of the nitrogen status of apple trees. This study assesses a machine vision-based system for quantifying the change in leaf color and its correlation with leaf nitrogen content. An image dataset was collected in color and 3D over five weeks in the fall of 2021 and 2023 at a commercial orchard using a ground vehicle-based stereovision sensor. Trees in the foreground were segmented from the point cloud using color and depth thresholding methods. Then, to estimate the proportion of yellow leaves per canopy, the color information of the segmented canopy area was quantified using a custom-defined metric, \textit{yellowness index} (a normalized ratio of yellow to green foliage in the tree) that varied from -1 to +1 (-1 being completely green and +1 being completely yellow). Both K-means-based methods and gradient boosting methods were used to estimate the \textit{yellowness index}. The gradient boosting based method proposed in this study was better than the K-means-based method (both in terms of computational time and accuracy), achieving an $R^2$ of 0.72 in estimating the \textit{yellowness index}. The metric was able to capture the gradual color transition from green to yellow over the study duration. Trees with lower leaf nitrogen showed the color transition to yellow earlier than the trees with higher nitrogen. Keywords: Fruit Tree Nitrogen Management, Machine Vision, Point Cloud Segmentation, Precision Nitrogen Management

cs.CV↗

arXiv2024

Compact robotic gripper with tandem actuation for selective fruit harvesting

Selective fruit harvesting is a challenging manipulation problem due to occlusions and clutter arising from plant foliage. A harvesting gripper should i) have a small cross-section, to avoid collisions while approaching the fruit; ii) have a soft and compliant grasp to adapt to different fruit geometry and avoid bruising it; and iii) be capable of rigidly holding the fruit tightly enough to counteract detachment forces. Previous work on fruit harvesting has primarily focused on using grippers with a single actuation mode, either suction or fingers. In this paper we present a compact robotic gripper that combines the benefits of both. The gripper first uses an array of compliant suction cups to gently attach to the fruit. After attachment, telescoping cam-driven fingers deploy, sweeping obstacles away before pivoting inwards to provide a secure grip on the fruit for picking. We present and analyze the finger design for both ability to sweep clutter and maintain a tight grasp. Specifically, we use a motorized test bed to measure grasp strength for each actuation mode (suction, fingers, or both). We apply a tensile force at different angles (0°, 15°, 30° and 45°), and vary the point of contact between the fingers and the fruit. We observed that with both modes the grasp strength is approximately 40 N. We use an apple proxy to test the gripper's ability to obtain a grasp in the presence of occluding apples and leaves, achieving a grasp success rate over 96% (with an ideal controller). Finally, we validate our gripper in a commercial apple orchard.

cs.RO↗

arXiv2024

A real-time, hardware agnostic framework for close-up branch reconstruction using RGB data

Creating accurate 3D models of tree topology is an important task for tree pruning. The 3D model is used to decide which branches to prune and then to execute the pruning cuts. Previous methods for creating 3D tree models have typically relied on point clouds, which are often computationally expensive to process and can suffer from data defects, especially with thin branches. In this paper, we propose a method for actively scanning along a primary tree branch, detecting secondary branches to be pruned, and reconstructing their 3D geometry using just an RGB camera mounted on a robot arm. We experimentally validate that our setup is able to produce primary branch models with 4-5 mm accuracy and secondary branch models with 15 degrees orientation accuracy with respect to the ground truth model. Our framework is real-time and can run up to 10 cm/s with no loss in model accuracy or ability to detect secondary branches.

cs.RO↗

arXiv2024

The Coupling Effect: Experimental Validation of the Fusion of Fossen and Featherstone to Simulate UVMS Dynamics in Julia

As Underwater Vehicle Manipulator Systems (UVMSs) have gotten smaller and lighter over the past years, it is becoming increasingly important to consider the coupling forces between the manipulator and the vehicle when planning and controlling the system. A number of different models have been proposed, each using different rigid body dynamics or hydrodynamics algorithms, or purporting to consider different dynamic effects on the system, but most go without experimental validation of the full model, and in particular, of the coupling effect between the two systems. In this work, we return to a model combining Featherstone's rigid body dynamics algorithms with Fossen's equations for underwater dynamics by using the Julia package RigidBodyDynamics.jl. We compare the simulation's output with experimental results from pool trials with a ten degree of freedom UVMS that integrates a Reach Alpha manipulator with a BlueROV2. We validate the model's usefulness and identify its strengths and weaknesses in studying the dynamic coupling effect.

cs.RO↗

arXiv2023

HISSbot: Sidewinding with a Soft Snake Robot

Snake robots are characterized by their ability to navigate through small spaces and loose terrain by utilizing efficient cyclic forms of locomotion. Soft snake robots are a subset of these robots which utilize soft, compliant actuators to produce movement. Prior work on soft snake robots has primarily focused on planar gaits, such as undulation. More efficient spatial gaits, such as sidewinding, are unexplored gaits for soft snake robots. We propose a novel means of constructing a soft snake robot capable of sidewinding, and introduce the Helical Inflating Soft Snake Robot (HISSbot). We validate this actuation through the physical HISSbot, and demonstrate its ability to sidewind across various surfaces. Our tests show robustness in locomotion through low-friction and granular media.

cs.RO↗

arXiv2022

Optimization-Based Mechanical Perception for Peduncle Localization During Robotic Fruit Harvest

Rising global food demand and harsh working conditions make fruit harvest an important domain to automate. Peduncle localization is an important step for any automated fruit harvesting system, since fruit separation techniques are highly sensitive to peduncle location. Most work on peduncle localization has focused on computer vision, but peduncles can be difficult to visually access due to the cluttered nature of agricultural environments. Our work proposes an alternative method which relies on mechanical -- rather than visual -- perception to localize the peduncle. To estimate the location of this important plant feature, we fit wrench measurements from a wrist force/torque sensor to a physical model of the fruit-plant system, treating the fruit's attachment point as a parameter to be tuned. This method is performed inline as part of the fruit picking procedure. Using our orchard proxy for evaluation, we demonstrate that the technique is able to localize the peduncle within a median distance of 3.8 cm and median orientation error of 16.8 degrees.

cs.RO↗

arXiv2022

An autonomous robot for pruning modern, planar fruit trees

Dormant pruning of fruit trees is an important task for maintaining tree health and ensuring high-quality fruit. Due to decreasing labor availability, pruning is a prime candidate for robotic automation. However, pruning also represents a uniquely difficult problem for robots, requiring robust systems for perception, pruning point determination, and manipulation that must operate under variable lighting conditions and in complex, highly unstructured environments. In this paper, we introduce a system for pruning sweet cherry trees (in a planar tree architecture called an upright fruiting offshoot configuration) that integrates various subsystems from our previous work on perception and manipulation. The resulting system is capable of operating completely autonomously and requires minimal control of the environment. We validate the performance of our system through field trials in a sweet cherry orchard, ultimately achieving a cutting success rate of 58%. Though not fully robust and requiring improvements in throughput, our system is the first to operate on fruit trees and represents a useful base platform to be improved in the future.

cs.RO↗

arXiv2022

Optical flow-based branch segmentation for complex orchard environments

Machine vision is a critical subsystem for enabling robots to be able to perform a variety of tasks in orchard environments. However, orchards are highly visually complex environments, and computer vision algorithms operating in them must be able to contend with variable lighting conditions and background noise. Past work on enabling deep learning algorithms to operate in these environments has typically required large amounts of hand-labeled data to train a deep neural network or physically controlling the conditions under which the environment is perceived. In this paper, we train a neural network system in simulation only using simulated RGB data and optical flow. This resulting neural network is able to perform foreground segmentation of branches in a busy orchard environment without additional real-world training or using any special setup or equipment beyond a standard camera. Our results show that our system is highly accurate and, when compared to a network using manually labeled RGBD data, achieves significantly more consistent and robust performance across environments that differ from the training set.

cs.CV↗

arXiv2021

Precision fruit tree pruning using a learned hybrid vision/interaction controller

Robotic tree pruning requires highly precise manipulator control in order to accurately align a cutting implement with the desired pruning point at the correct angle. Simultaneously, the robot must avoid applying excessive force to rigid parts of the environment such as trees, support posts, and wires. In this paper, we propose a hybrid control system that uses a learned vision-based controller to initially align the cutter with the desired pruning point, taking in images of the environment and outputting control actions. This controller is trained entirely in simulation, but transfers easily to real trees via a neural network which transforms raw images into a simplified, segmented representation. Once contact is established, the system hands over control to an interaction controller that guides the cutter pivot point to the branch while minimizing interaction forces. With this simple, yet novel, approach we demonstrate an improvement of over 30 percentage points in accuracy over a baseline controller that uses camera depth data.

cs.RO↗

arXiv2021

Semantics-guided Skeletonization of Sweet Cherry Trees for Robotic Pruning

Dormant pruning for fresh market fruit trees is a relatively unexplored application of agricultural robotics for which few end-to-end systems exist. One of the biggest challenges in creating an autonomous pruning system is the need to reconstruct a model of a tree which is accurate and informative enough to be useful for deciding where to cut. One useful structure for modeling a tree is a skeleton: a 1D, lightweight representation of the geometry and the topology of a tree. This skeletonization problem is an important one within the field of computer graphics, and a number of algorithms have been specifically developed for the task of modeling trees. These skeletonization algorithms have largely addressed the problem as a geometric one. In agricultural contexts, however, the parts of the tree have distinct labels, such as the trunk, supporting branches, etc. This labeled structure is important for understanding where to prune. We introduce an algorithm which produces such a labeled skeleton, using the topological and geometric priors associated with these labels to improve our skeletons. We test our skeletonization algorithm on point clouds from 29 upright fruiting offshoot (UFO) trees and demonstrate a median accuracy of 70% with respect to a human-evaluated gold standard. We also make point cloud scans of 82 UFO trees open-source to other researchers. Our work represents a significant first step towards a robust tree modeling framework which can be used in an autonomous pruning system.

cs.RO↗