Searcharxiv⌕ Search

arXiv subjects

Joseph S. Jewell

Publications and source records attributed to Joseph S. Jewell.

3 recordsLinked to original sources

Experimental Investigation of Hypersonic Shock-Wave/Boundary-Layer Interaction Dynamics Using Plasma-Generated Disturbances

The unsteady dynamics of a transitional 3D shock-wave/boundary-layer interaction (SWBLI) are investigated using pulsed plasma disturbances on a cone-slice-ramp geometry in the Boeing/AFOSR Mach-6 Quiet Tunnel. Nanosecond-duration repetitively pulsed spark discharges introduce disturbances which convect through the interaction, causing transient turbulent breakdown in the reattaching shear layer. The unsteady behavior of the separation bubble is characterized using schlieren imaging, and natural broadband unsteadiness is observed in the form of large-scale shock and separation flapping at frequencies below 1500 Hz ($Sr_L< 0.25$). Disturbance packets are introduced at a range of perturbation frequencies and generally induce shear layer oscillations; however, perturbation frequencies below the natural cutoff frequency ($f\approx 1500$ $\mathrm{Hz}$) yield fluctuations with significantly larger amplitudes than those above this frequency. Phase-averaged schlieren images reveal that the disturbances cause a decrease in shear layer height immediately after inducing turbulent breakdown around the reattachment point, with this displacement beginning downstream and moving upstream. The shear layer's response to this displacement is consistent with that of an under-damped dynamic system with a preferred oscillation frequency; the measured frequency of the oscillatory response to external perturbation ($f = 1464$ Hz) is also the approximate cutoff frequency of the natural broadband unsteadiness. Furthermore, the relationship between perturbation frequency and oscillation amplitude resembles that of a low-pass filter, with a cutoff frequency that is within 5\% of the measured oscillator frequency. These experimental findings support the theory that the cutoff frequency for the SWBLI's frequency-selective amplification is tied to the time scale of the weakly damped global mode.

physics.flu-dyn↗

Onset of separation unsteadiness in hypersonic shock boundary layer interaction on a cone-step

Shock-boundary layer interactions (SBLI) on hypersonic cone step flows exhibit a range of intrinsic unsteady behaviors, from shear-layer oscillations to large-scale pulsations. This work investigates the unsteadiness in a cone-step geometry at Mach 6 under quiet flow conditions at different freestream Reynolds numbers using time-resolved Schlieren imaging and spectral proper orthogonal decomposition (SPOD). Experimental results are compared with high-fidelity axisymmetric and three-dimensional simulations. Results demonstrate regime transition in the parameter space, across the unsteadiness boundary, all the way from shear-layer breakdown to shock system oscillations and ultimately to large-amplitude pulsations. The dominant mode in the experiments and the simulations corresponds to a Strouhal number St ~ 0.17 for small oscillations reducing to St ~ 0.13 for large pulsations. A detailed description of the unsteady shock dynamics, the instability of the shear layer during onset of unsteadiness and an analysis of the nonlinear limit cycle is presented.

physics.flu-dyn↗

Gas Bubbles Emerging from a Submerged Granular Bed

This fluid dynamics video was submitted to the Gallery of Fluid Motion for the 2009 APS Division of Fluid Dynamics Meeting in Minneapolis, Minnesota. In this video we show some results from a simple experiment where air was injected by a single nozzle at known constant flow rates in the bottom of a granular bed submerged in water. The injected air propagates through the granular bed in one of two modes. Mode 1 emergence involves small discrete bubbles taking tortuous paths through the interstitial space of the bed. Multiple small bubbles can be emitted from the bed in an array of locations at the same time during Mode 1 emergence. Mode 2 emergence involves large discrete bubbles locally fluidizing the granular bed and exiting the bed approximately above the injection site. Bead diameter, bead density, and air flow rate were varied to investigate the change in bubble release behavior at the top of the granular bed. This system is a useful model for methane seeps in lakes. Methane bubbles are released from the decomposition of organic matter in the lake bed. The initial size of the bubble determines how much of the gas is absorbed into the lake and how much of the gas reaches the surface and is released into the atmosphere. The size and behavior of the emerging bubbles may also affect the amount of vertical mixing occurring in the lake, as well as the mixing from the lake bed into the benthic layer.

physics.flu-dyn↗