SearcharxivSearch

arXiv subjects

Joshua A. Slater

Publications and source records attributed to Joshua A. Slater.

At least 19 recordsLinked to original sources

Spectroscopy and Coherence of an Excited-State Transition in Tm$^{3+}$:YAlO$_3$ at Telecommunication Wavelength

We characterize spectroscopic and coherence properties of the 1451.37 nm excited-state zero-phonon line (ZPL) between the $^{3}F_{4}$ and the $^{3}H_{4}$ manifolds of a thulium-doped yttrium aluminum perovskite (Tm$^{3+}$:YAlO$_3$) crystal at temperatures around 1.5 K. We measure the absorption spectrum between the $^{3}H_{6}$ - $^{3}F_{4}$ and $^{3}F_{4}$ - $^{3}H_{4}$ manifolds, the inhomogeneous broadening of the $^{3}F_{4}$ - $^{3}H_{4}$ (excited-state) ZPL, and the lifetimes of the higher-lying and lower-lying excited states. We also investigate level shifts caused by the quadratic Zeeman interaction as well as spectral hole-burning spectra with varying magnetic fields, providing insights into hyperfine interactions. Using again spectral holes but also optical free induction decays (FIDs), we assess optical coherence times, finding a maximum of $4.75 \pm 0.07~μs$ at B=2T and low ion concentration in the $^{3}F_{4}$ level. Our results -- the first to demonstrate coherence of an excited-state transition in a rare-earth crystal -- suggest the possibility of exploiting such transitions for quantum technology.

quant-ph

Quantum Strategies to Overcome Classical Multiplexing Limits

Near-term quantum networks face a bottleneck due to low quantum communication rates. This degrades performance both by lowering operating speeds and increasing qubit storage time in noisy memories, making some quantum internet applications infeasible. One way to circumvent this bottleneck is multiplexing: combining multiple signals into a single signal to improve the overall rate. Standard multiplexing techniques are classical in that they do not make use of coherence between quantum channels nor account for decoherence rates that vary during a protocol's execution. In this paper, we first derive semiclassical limits to multiplexing for many-qubit protocols, and then introduce two techniques: single click quantum multiplexing and multi-server multiplexing. These can enable beyond-classical multiplexing advantages. We illustrate these techniques through three example applications: 1) entanglement generation between two asymetric quantum network nodes (i.e., repeaters or quantum servers with inequal memories), 2) remote state preparation between many end user devices and a single quantum node, and 3) remote state preparation between one end user device and many internetworked quantum nodes. By utilizing many noisy internetworked quantum devices instead of fewer low-noise devices, our multiplexing strategies enable new paths towards achieving high-speed many-qubit quantum network applications.

quant-ph

Optical Investigations of Coherence and Relaxation Dynamics of a Thulium-doped Yttrium Gallium Garnet Crystal at sub-Kelvin Temperatures for Optical Quantum Memory

Rare-earth ion-doped crystals are of great interest for quantum memories, a central component in future quantum repeaters. To assess the promise of 1$\%$ Tm$^{3+}$-doped yttrium gallium garnet (Tm:YGG), we report measurements of optical coherence and energy-level lifetimes of its $^3$H$_6$ $\leftrightarrow$ $^3$H$_4$ transition at a temperature of around 500 mK and various magnetic fields. Using spectral hole burning, we find hyperfine ground-level (Zeeman level) lifetimes of several minutes at magnetic fields of less than 1000 G. We also measure coherence time exceeding one millisecond using two-pulse photon echoes. Three-pulse photon echo and spectral hole burning measurements reveal that due to spectral diffusion, the effective coherence time reduces to a few $μ$s over a timescale of around two hundred seconds. Finally, temporal and frequency-multiplexed storage of optical pulses using the atomic frequency comb protocol is demonstrated. Our results suggest Tm:YGG to be promising for multiplexed photonic quantum memory for quantum repeaters.

quant-ph

High-Q magnetic levitation and control of superconducting microspheres at millikelvin temperatures

We report the levitation of a superconducting lead-tin sphere with 100 micrometer diameter (corresponding to a mass of 5.6 micrograms) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 hertz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well as optically and exhibits quality factors of up to 2.6e7. We also demonstrate 3D magnetic feedback control of the sphere's motion. The setup is housed in a dilution refrigerator operating at 15 millikelvin. By implementing a cryogenic vibration isolation system we can attenuate environmental vibrations at 200 hertz by approximately seven orders of magnitude. The combination of low temperature, large mass and high quality factor as well as adjustable resonance frequencies provides a promising platform for testing quantum physics in previously unexplored regimes with high mass and long coherence times.

quant-ph

Requirements for upgrading trusted nodes to a repeater chain over 900 km of optical fiber

We perform a numerical study of the distribution of entanglement on a real-world fiber grid connecting the German cities of Bonn and Berlin. The connection is realized using a chain of processing-node quantum repeaters spanning roughly 900 kilometers. We investigate how minimal hardware requirements depend on the target application, as well as on the number of repeaters in the chain. We find that requirements for blind quantum computing are markedly different than those for quantum key distribution, with the required coherence time being around two and a half times larger for the former. Further, we observe a trade-off regarding how target secret-key rates are achieved when using different numbers of repeaters: comparatively low-quality entangled states generated at a high rate are preferred for higher numbers of repeaters, whereas comparatively high-quality states generated at a lower rate are favored for lower numbers of repeaters. To obtain our results we employ an extensive simulation framework implemented using NetSquid, a discrete-event simulator for quantum networks. These are combined with an optimization methodology based on genetic algorithms to determine minimal hardware requirements.

quant-ph

Long-Range QKD without Trusted Nodes is Not Possible with Current Technology

A recently published patent (https://www.ipo.gov.uk/p-ipsum/Case/PublicationNumber/GB2590064) has claimed the development of a novel quantum key distribution protocol purporting to achieve long-range quantum security without trusted nodes and without use of quantum repeaters. Here we present a straightforward analysis of this claim, and reach the conclusion that it is largely unfounded.

quant-ph

Deployed MDI-QKD and Bell-State Measurements Coexisting with Standard Internet Data and Networking Equipment

The forthcoming quantum Internet is poised to allow new applications not possible with the conventional Internet. The ability for both quantum and conventional networking equipment to coexist on the same fiber network would greatly facilitate the deployment and adoption of coming quantum technology. Most quantum networking tasks, like quantum repeaters and the connection of quantum processors, require nodes for multi-qubit quantum measurements (often Bell-State measurements), and their real-world coexistence with the conventional Internet has yet to be shown. Here we field deploy an MDI-QKD system, containing a Bell-State measurement Node, over the same fiber network as multiple standard IP data networks, between three nearby cities in the Netherlands. We demonstrate over 10 Gb/s data communication rates simultaneously with our next-generation QKD system, and estimate 200 GB/s of classical data transmission would be easily achievable without significantly affecting QKD performance. Moreover, as the network ran autonomously for two weeks, this shows an important step towards the coexistence and integration of quantum networking into the existing telecommunication infrastructure.

quant-ph

Spectrally Multiplexed Hong-Ou-Mandel Interference

We explore the suitability of a Virtually-Imaged Phased Array (VIPA) as a Spectral-to-Spatial Mode-Mapper (SSMM) for applications in quantum communication such as a quantum repeater. To this end we demonstrate spectrally-resolved two-photon "Hong-Ou-Mandel" (HOM) interference. Spectral sidebands are generated on a common optical carrier and weak coherent pulses are prepared in each spectral mode. The pulses are subsequently sent to a beamsplitter followed by two SSMMs and two single-photon detectors, allowing us to measure spectrally-resolved HOM interference. We show that the so-called HOM dip can be observed in the coincidence detection pattern of matching spectral modes with visibilities as high as 45% (with the maximum being 50%). For unmatched modes, the visibility drops significantly, as expected. Due to the similarity between HOM interference and a linear-optics Bell-state measurement (BSM), this establishes this simple optical arrangement as a candidate for the implementation of a spectrally-resolved BSM. Finally, we simulate the secret key generation rate using current and state-of-the-art parameters in a Measurement-Device Independent Quantum Key Distribution scenario and explore the trade-off between rate and complexity in the context of a spectrally-multiplexed quantum communication link.

quant-ph

A long-lived solid-state optical quantum memory for high-rate quantum repeaters

We argue that long optical storage times are required to establish entanglement at high rates over large distances using memory-based quantum repeaters. Triggered by this conclusion, we investigate the $^3$H$_6$ $\leftrightarrow$ $^3$H$_4$ transition at 795.325 nm of Tm:Y$_3$Ga$_5$O$_{12}$ (Tm:YGG). Most importantly, we show that the optical coherence time can reach 1.1 ms, and, using laser pulses, we demonstrate optical storage based on the atomic frequency comb protocol up to 100 $μ$s as well as a memory decay time T$_M$ of 13.1 $μ$s. Possibilities of how to narrow the gap between the measured value of T$_m$ and its maximum of 275 $μ$s are discussed. In addition, we demonstrate quantum state storage using members of non-classical photon pairs. Our results show the potential of Tm:YGG for creating quantum memories with long optical storage times, and open the path to building extended quantum networks.

quant-ph

Non-classical correlations between single photons and phonons from a mechanical oscillator

Interfacing a single photon with another quantum system is a key capability in modern quantum information science. It allows quantum states of matter, such as spin states of atoms, atomic ensembles or solids, to be prepared and manipulated by photon counting and, in particular, to be distributed over long distances. Such light-matter interfaces have become crucial to fundamental tests of quantum physics and realizations of quantum networks. Here we report non-classical correlations between single photons and phonons -- the quanta of mechanical motion -- from a nanomechanical resonator. We implement a full quantum protocol involving initialization of the resonator in its quantum ground state of motion and subsequent generation and read-out of correlated photonphonon pairs. The observed violation of a Cauchy-Schwarz inequality is clear evidence for the non-classical nature of the mechanical state generated. Our results demonstrate the availability of on-chip solid-state mechanical resonators as light-matter quantum interfaces. The performance we achieved will enable studies of macroscopic quantum phenomena as well as applications in quantum communication, as quantum memories and as quantum transducers.

quant-ph

Rate-loss analysis of an efficient quantum repeater architecture

We analyze an entanglement-based quantum key distribution (QKD) architecture that uses a linear chain of quantum repeaters employing photon-pair sources, spectral-multiplexing, linear-optic Bell-state measurements, multi-mode quantum memories and classical-only error correction. Assuming perfect sources, we find an exact expression for the secret-key rate, and an analytical description of how errors propagate through the repeater chain, as a function of various loss and noise parameters of the devices. We show via an explicit analytical calculation, which separately addresses the effects of the principle non-idealities, that this scheme achieves a secret key rate that surpasses the TGW bound---a recently-found fundamental limit to the rate-vs.-loss scaling achievable by any QKD protocol over a direct optical link---thereby providing one of the first rigorous proofs of the efficacy of a repeater protocol. We explicitly calculate the end-to-end shared noisy quantum state generated by the repeater chain, which could be useful for analyzing the performance of other non-QKD quantum protocols that require establishing long-distance entanglement. We evaluate that shared state's fidelity and the achievable entanglement distillation rate, as a function of the number of repeater nodes, total range, and various loss and noise parameters of the system. We extend our theoretical analysis to encompass sources with non-zero two-pair-emission probability, using an efficient exact numerical evaluation of the quantum state propagation and measurements. We expect our results to spur formal rate-loss analysis of other repeater protocols, and also to provide useful abstractions to seed analyses of quantum networks of complex topologies.

quant-ph

Entanglement swapping with quantum-memory-compatible photons

We report entanglement swapping with time-bin entangled photon pairs, each constituted of a 795 nm photon and a 1533 nm photon, that are created via spontaneous parametric down conversion in a non-linear crystal. After projecting the two 1533 nm photons onto a Bell state, entanglement between the two 795 nm photons is verified by means of quantum state tomography. As an important feature, the wavelength and bandwidth of the 795 nm photons is compatible with Tm:LiNbO3-based quantum memories, making our experiment an important step towards the realization of a quantum repeater.

quant-ph

Practical Quantum Repeaters with Parametric Down-Conversion Sources

Conventional wisdom suggests that realistic quantum repeaters will require quasi-deterministic sources of entangled photon pairs. In contrast, we here study a quantum repeater architecture that uses simple parametric down-conversion sources, as well as frequency-multiplexed multimode quantum memories and photon-number resolving detectors. We show that this approach can significantly extend quantum communication distances compared to direct transmission. This shows that important trade-offs are possible between the different components of quantum repeater architectures.

quant-ph

Measurement-device-independent quantum key distribution: from idea towards application

We assess the overall performance of our quantum key distribution (QKD) system implementing the measurement-device-independent (MDI) protocol using components with varying capabilities such as different single photon detectors and qubit preparation hardware. We experimentally show that superconducting nanowire single photon detectors allow QKD over a channel featuring 60 dB loss, and QKD with more than 600 bits of secret key per second (not considering finite key effects) over a 16 dB loss channel. This corresponds to 300 km and 80 km of standard telecommunication fiber, respectively. We also demonstrate that the integration of our QKD system into FPGA-based hardware (instead of state-of-the-art arbitrary waveform generators) does not impact on its performance. Our investigation allows us to acquire an improved understanding of the trade-offs between complexity, cost and system performance, which is required for future customization of MDI-QKD. Given that our system can be operated outside the laboratory over deployed fiber, we conclude that MDI-QKD is a promising approach to information-theoretic secure key distribution.

quant-ph

Efficient Bell state analyzer for time-bin qubits with fast-recovery WSi superconducting single photon detectors

We experimentally demonstrate a high-efficiency Bell state measurement for time-bin qubits that employs two superconducting nanowire single-photon detectors with short dead-times, allowing projections onto two Bell states, |Psi>- and |Psi+>. Compared to previous implementations for time-bin qubits, this yields an increase in the efficiency of Bell state analysis by a factor of thirty.

quant-ph

Spectral multiplexing for scalable quantum photonics using an atomic frequency comb quantum memory and feed-forward control

Future multi-photon applications of quantum optics and quantum information science require quantum memories that simultaneously store many photon states, each encoded into a different optical mode, and enable one to select the mapping between any input and a specific retrieved mode during storage. Here we show, with the example of a quantum repeater, how to employ spectrally-multiplexed states and memories with fixed storage times that allow such mapping between spectral modes. Furthermore, using a Ti:Tm:LiNbO3 waveguide cooled to 3 Kelvin, a phase modulator, and a spectral filter, we demonstrate storage followed by the required feed-forward-controlled frequency manipulation with time-bin qubits encoded into up to 26 multiplexed spectral modes and 97% fidelity.

quant-ph

Modeling a measurement-device-independent quantum key distribution system

We present a detailed description of a widely applicable mathematical model for quantum key distribution (QKD) systems implementing the measurement-device-independent (MDI) protocol. The model is tested by comparing its predictions with data taken using a proof-of-principle, time-bin qubit-based QKD system in a secure laboratory environment (i.e. in a setting in which eavesdropping can be excluded). The good agreement between the predictions and the experimental data allows the model to be used to optimize mean photon numbers per attenuated laser pulse, which are used to encode quantum bits. This in turn allows optimization of secret key rates of existing MDI-QKD systems, identification of rate-limiting components, and projection of future performance. In addition, we also performed measurements over deployed fiber, showing that our system's performance is not affected by environment-induced perturbations.

quant-ph

An integrated processor for photonic quantum states using a broadband light-matter interface

Faithful storage and coherent manipulation of quantum optical pulses are key for long distance quantum communications and quantum computing. Combining these functions in a light-matter interface that can be integrated on-chip with other photonic quantum technologies, e.g. sources of entangled photons, is an important step towards these applications. To date there have only been a few demonstrations of coherent pulse manipulation utilizing optical storage devices compatible with quantum states, and that only in atomic gas media (making integration difficult) and with limited capabilities. Here we describe how a broadband waveguide quantum memory based on the Atomic Frequency Comb (AFC) protocol can be used as a programmable processor for essentially arbitrary spectral and temporal manipulations of individual quantum optical pulses. Using weak coherent optical pulses at the few photon level, we experimentally demonstrate sequencing, time-to-frequency multiplexing and demultiplexing, splitting, interfering, temporal and spectral filtering, compressing and stretching as well as selective delaying. Our integrated light-matter interface offers high-rate, robust and easily configurable manipulation of quantum optical pulses and brings fully practical optical quantum devices one step closer to reality. Furthermore, as the AFC protocol is suitable for storage of intense light pulses, our processor may also find applications in classical communications.

quant-ph