arXiv subjects

Joshua Migdal

Publications and source records attributed to Joshua Migdal.

9 recordsLinked to original sources

arXiv2026

Exploring Proximity and Tactile Sensing for Robotic Manipulation

Pre-touch sensing, or sensing information about an object before contact, is an attractive modality for robot hands as it can allow a robot to anticipate and respond to a contact before it happens. In this work, we introduce ToFTouch, a multimodal tactile sensor combining three multizone (4$\times$4 resolution) time-of-flight sensors with an optics-based pressure sensing array. We mount this sensor on a parallel jaw gripper and demonstrate its utility on three distinct tasks: (i) pre-grasp adjustment, (ii) item extraction from clutter, and (iii) item insertion into tight spaces. For pre-grasp adjustment, ToF feedback reduced cycle time by 7.4$\%$ by enabling anticipatory gripper closure during approach. For extraction, ToF sensing enabled successful retrieval across all tested depth offsets ($\pm$2 cm) deviating from the nominal pick point, including conditions where baseline approaches failed, with standard deviations below 0.4 cm. For insertion into dense clutter, we explore the proximity and tactile information provided from ToFTouch during an insertion trajectory. The results demonstrate the utility of multizone ToF sensing in a manipulation environment.

cs.RO↗

arXiv2026

Open-World Object Motion Anticipation via Meta-Learned Semantic Adaptation

Anticipating the motion of nearby objects is critical for safe and efficient robot navigation. Without a proper understanding of what may move, a robot may plan overly conservative, inefficient trajectories to guarantee safety, or it may be overly risky, resulting in unacceptable collisions. While tracking and predicting the motion of known objects has seen significant progress, little research addresses how a robot should adapt online to novel objects, including anticipating how one object may move another (e.g., a person operating a forklift to move a pallet). To enable this capability, we propose a meta-learned graph neural network that leverages a semantic, geometric, and relational history of objects to accurately predict, from a few online observations, when objects will begin to move in new environments. We demonstrate that our method, which is trained only in simulation, accurately anticipates the motion of objects unseen at training time, transfers to hardware without any fine-tuning, and outperforms a vision-language model and a class-frequency baseline in both simulation and hardware experiments. Our method's accurate prediction enables collision-free traversals in a closed-loop navigation simulation, while remaining within four seconds of the fastest, collision-prone planner.

cs.RO↗

arXiv2026

Continuous-Time Safe Planning and Control for Agile Quadrupeds

Agile quadruped navigation in dynamic environments demands trajectories that are both dynamically feasible and provably collision-free. Most real-time planners achieve tractability through a convex reduction that requires simplified kinematic models, discarding motion that the robot can readily execute, and certify safety only at discretization points, leaving open possible inter-sample collisions with moving obstacles. We present a real-time motion planning framework that retains the fully-actuated $SE(2)$ model of a quadruped, with its anisotropic, heading-coupled velocity bounds, and accepts the resulting nonconvexity. By parameterizing trajectories as composite Bernstein polynomials, we exploit the convex hull property to certify collision avoidance and the input bounds over the entirety of each planning horizon. Solved at online replanning rates, the optimization runs in closed loop, commanding body velocities to the locomotion controller. We validate the approach in simulation against ablations and external baselines, and in hardware experiments on a quadruped navigating among unknown moving obstacles, recovering both lateral and heading-coupled motion that simplified models exclude.

cs.RO↗

arXiv2026

Intent-Informed Model Predictive Control for Shared Autonomy in Remote Manipulation Tasks

Shared autonomy is a control paradigm that combines human cognitive abilities with robot precision to enable effective remote manipulation in complex environments. A key challenge is how to adapt the level of autonomy using information extracted from the human, task, and/or environment. In this paper, we propose a novel arbitration strategy that dynamically adjusts the level of autonomy in the system using the entropy of a belief distribution derived from a multimodal intent inference. Human intent is modeled with a Dynamic Bayesian Network (DBN), which updates beliefs over goals given real-time operator gaze data and robot arm motion during teleoperation. We then formulate the blending of human input and autonomous control as a Model Predictive Control (MPC) problem, where the system's autonomous behavior is guided by the belief distribution. This approach enables continuous, gradual transitions across the full spectrum of autonomy levels, from direct teleoperation to full autonomy. To validate our approach, we conducted experiments to compare the performance of our proposed algorithm against two MPC-based shared autonomy methods. Compared to the baselines, our approach achieved reductions of at least 61% in object retrieval time, 44% in trajectory length, and 60% in human control input. Participants reported high perceived control, predictability, intent recognition, and responsiveness, along with low workload.

cs.RO↗

arXiv2026

Factorized Tactile Representation and Control for Sim-to-Real Manipulation

Tactile sim-to-real learning must bridge simulated contact and device-specific sensor responses while preserving information needed for control. We propose a factorized tactile representation and control framework that maps normal force and contact patch to an effective contact response recoverable from sensor readings. The response is separated into contact geometry, force distribution, and temporal contact change, with representation-specific encoding and randomization. A Tactile Gated Policy preserves these representations separately through control and operates over all mask configurations without retraining. We evaluate the approach through response reconstruction, spatial alignment, force regulation, and contact-rich adversarial peg insertion in simulation and the real world, enabling the utility and transfer reliability of different tactile representations to be assessed independently. The approach achieves <1 mm contact localization, 1.69 N force-tracking error on unseen geometries, and a 35% improvement in real-world adversarial peg insertion over the unfactorized response, with different tactile representations benefiting different interactions.

cs.RO↗

arXiv2026

TACTFUL: Tactile-Driven Exploration For Object Localization and Identification in Confined Environments

Humans effortlessly locate and identify objects by touch alone, even without vision. In contrast, robotic systems rely heavily on vision and struggle with autonomous tactile exploration and object identification. We present TACTFUL, a vision-free tactile exploration framework that enables a multi-fingered robot to autonomously explore confined workspaces, discover objects through contact, and identify them via tactile reconstruction. Trained entirely on real hardware without simulation, our system learns a single policy that balances global workspace exploration with local surface refinement through a dynamic reward schedule. Our results demonstrate that tactile sensing, when paired with structured learning, can serve as an effective primary modality for object-level reasoning, achieving 77% success with 0.015 m average reconstruction error and outperforming baseline approaches on real-world objects.

cs.RO↗

arXiv2026

Training-Free Object-Agnostic Jam Detection in Fulfillment Centers

In fulfillment centers, diverse objects move continuously from inbound to outbound operations and can become jammed due to excessive conveyor friction, incorrect orientation, or mechanical failures. Traditional jam detection approaches rely on object detection models to identify objects, followed by tracking algorithms (such as IoU overlap and Kalman filtering) to monitor motion over time. This pipeline requires thousands of manual annotations, consuming approximately two weeks of effort, and is limited to annotated object classes. We present a training-free, object-agnostic jam detection method that eliminates the need for labeled data. Our approach uniformly samples reference points within the monitoring region when no objects are present. As objects occlude these points, we detect motion. When a sufficient fraction remains occluded beyond a temporal threshold, we classify the event as a jam. Unlike conventional point tracking--which treats occlusion as a failure case--our approach repurposes occlusion as a detection signal, monitoring whether reference points remain persistently occluded rather than tracking where they move. Our experimental evaluation on 1,069 videos demonstrates that AllTracker achieves 100.00% precision and 93.33% F1 score, significantly outperforming classical sparse tracking methods while maintaining training-free deployment. This approach offers three key advantages: (1) no training data or manual annotations, (2) object-agnostic generalization to arbitrary object types, and (3) significantly reduced development time.

cs.CV↗

arXiv2026

Enhancing Computer Vision Model Generalization in Warehouse Facilities: A Case Study on Anomaly Detection in Vertical Material Handling Systems

Deploying computer vision models in Warehouse Facilities traditionally requires extensive resources for camera mounting, image collection, annotation, training, and deployment - a process often needing repetition in each new environment due to camera mounting constraints and environmental variability. This paper explores an innovative approach to streamline this process by conducting the standard procedure solely in a laboratory setting, focusing on vertical material handling systems and anomaly detection in forks of the systems. Through extensive experimentation, we have found that combining optimal camera placement, strategic image triggering, careful model selection and model ensemble enables effective generalization from laboratory conditions to diverse warehouse facilities environments, potentially transforming warehouse automation implementation by simplifying warehouse facilities deployment to just camera mounting, image collection, and model deployment, thereby saving significant resources and time typically spent on image annotation and model retraining. This is an experimental research study and not a production deployment.

cs.CV↗

arXiv2026

Grasp, Slide, Roll: Comparative Analysis of Contact Modes for Tactile-Based Shape Reconstruction

Tactile sensing allows robots to gather detailed geometric information about objects through physical interaction, complementing vision-based approaches. However, efficiently acquiring useful tactile data remains challenging due to the time-consuming nature of physical contact and the need to strategically choose contact locations that maximize information gain while minimizing physical interactions. This paper studies how different contact modes affect object shape reconstruction using a tactile-enabled dexterous gripper. We compare three contact interaction modes: grasp-releasing, sliding induced by finger-grazing, and palm-rolling. These contact modes are combined with an information-theoretic exploration framework that guides subsequent sampling locations using a shape completion model. Our results show that the improved tactile sensing efficiency of finger-grazing and palm-rolling translates into faster convergence in shape reconstruction, requiring 34% fewer physical interactions while improving reconstruction accuracy by 55%. We validate our approach using a UR5e robot arm equipped with an Inspire-Robots Dexterous Hand, showing robust performance across primitive object geometries.

cs.RO↗