arXiv subjects

Juan Estrada

Publications and source records attributed to Juan Estrada.

At least 19 recordsLinked to original sources

arXiv2026

Regression with Observational Multilayered Network Data

A novel method to estimate social effect coefficients in the popular so-called linear-in-means regression model in the Social Sciences is presented here that utilizes non-experimental multidimensional network data. The procedure can accommodate social interactions that correlate with the error in the model by making use of a different set of network links among the same observations that are exogenous in the traditional sense. In particular, the full observability of a two-layered multiplex network data structure is assumed here to propose a new Generalized 3-Stage Least Squares (G3SLS) estimator that is consistent, asymptotically normally distributed, and also easy to implement using widely-used existing statistical software because of its closed-form definition. The underlying assumptions are general enough to accommodate common problems with observational data such as measurement error, simultaneity, and unobserved heterogeneity. Monte Carlo exercises confirm the good small sample performance of the proposed G3SLS estimator in these scenarios. An empirical application finds positive and significant peer effects in citations among research articles published in top general-interest journals in economics.

econ.EM↗

arXiv2026

Estimating Peer Influence in Multilayer Networks

This paper proposes a model-based empirical method to identify influential individuals in risky behaviors. To determine the most influential individuals, we estimate peer influence using observational cross-sectional data from multiple social connections. Our empirical strategy employs the observed characteristics of distant individuals across multiple social networks as instruments to address the endogeneity arising from homophily. Using Add Health data, we find positive peer effects from friends and classmates on both cigarette smoking and marijuana use. Based on the estimated peer effects, we characterize the influencers in our sample.

econ.EM↗

arXiv2026

Estimating Social Effects with Randomized and Observational Network Data

This paper introduces an innovative approach to identifying and estimating the parameters of interest in the widely recognized linear-in-means regression model under conditions where the initial randomization of peers determines the observed network. We assert that peers who are initially randomized do not produce social effects. However, after randomization, agents can endogenously develop significant connections that potentially generate peer influences. We present a moment condition that compiles local heterogeneous identifying information for all agents within the population. Under the assumption of $\psi$-dependence in the endogenous network space, we propose a Generalized Method of Moments (GMM) estimator, which is proven to be consistent, asymptotically normally distributed, and straightforward to implement using commonly available statistical software due to its closed-form expression. Monte Carlo simulations demonstrate the GMM estimator's strong small-sample performance. An empirical analysis utilizing data from Hong Kong high school students reveals substantial positive spillover effects on math test scores among study partners in our sample, provided that their seatmates were exogenously assigned by their teachers.

econ.EM↗

arXiv2026

In situ cryogenic characterization of proton damage in thick p-channel skipper CCDs

Skipper charge-coupled devices (CCDs) are an offshoot of standard silicon pixel detectors and are capable of performing repeated non-destructive charge measurements, enabling deeply sub-electron readout noise. This capability has opened the door to single-photon counting from the near-infrared ($\sim$1.1\,$\mu$m) to the soft X-ray (several keV), making these devices strong candidates for future astronomical instruments operating in the photon-starved limit. Furthermore, the p-channel architecture used to fabricate Skipper CCDs on n-type silicon has been demonstrated to have an increased hardness to the intense radiation environment of space. Building upon previous irradiation campaigns on room-temperature sensors, here we describe the first radiation-hardness tests of p-channel skipper CCDs at their cryogenic operating temperatures. We assess the performance of the floating-gate output stage and global CCD parameters (charge transfer inefficiency, dark current, hot pixels, and charge traps). We find that these devices maintain excellent performance after displacement damage doses equivalent to ${\sim}$10 years at the Earth/Sun L2 Lagrange point, demonstrating for the first time that these sensors remain radiation-hard in realistic deep-space thermal and radiation environments.

astro-ph.IM↗

arXiv2026

Characterization of Spurious Charge in SENSEI Skipper-CCDs

Skipper Charge-Coupled Devices (Skipper-CCDs) are a leading technology in the search for sub-GeV dark matter and coherent elastic neutrino-nucleus scattering. A key background for rare-event searches with these detectors arises from "spurious charge" -- single-electron events generated when charges are transferred through the active region to the serial register, and across the serial register to the readout stage. We present a characterization of spurious charge in both the active region and the serial register of SENSEI Skipper-CCDs, and show that, in a well-shielded low-background environment, the dominant contribution originates in the serial register during Skipper readout, when horizontal clocks are held at constant voltage between pixel transfers. Motivated by this finding, we develop a "tri-level" clocking scheme in which the held-low phase is raised to an intermediate voltage during readout to suppress trap-mediated charge generation. Using the SENSEI detector near the MINOS cavern, we measure a serial-register single-electron density of $(2.9 \pm 0.1) \times 10^{-5}$ electrons/pixel/image under standard SENSEI readout conditions, reduced to $(4.0 \pm 0.4) \times 10^{-6}$ electrons/pixel/image with tri-level clocking -- a factor of $\sim$7 improvement. This technique offers a promising path to lower backgrounds in current and future Skipper-CCD experiments.

physics.ins-det↗

arXiv2026

MAS-CCD: New technique for measuring low-level charge content based on the multiple amplifier architecture

Low-noise detectors are a key technology for the next generation of astronomical instruments aimed at spectroscopy of faint objects and the search for exoplanets. In this context, the multiple-amplifier sensing charge-coupled device (MAS-CCD) emerges as a promising technology for future scientific instruments. A critical parameter affecting the performance of these devices is spurious charge, produced by the clocking of the gates. Its measurement is typically challenging with existing methods. In practice, the optimization of this parameter often relies on empirical procedures that require significant time and careful consideration of the trade-off with full-well capacity. In this work, we present a new technique to estimate spurious charge based on covariance analysis of the output amplifiers of the MAS-CCD, which measures the same charge packet in different amplifiers at different times. The method enables fast and precise measurements of spurious charge under operating conditions where conventional approaches are difficult to apply. We develop the theoretical framework of the method and validate the model through simulations. The results demonstrate the feasibility of this approach and suggest that it could serve as a basis for reliable large-scale characterization of sensor performance.

physics.ins-det↗

arXiv2026

X-ray Response of the Fully-Depleted, p-Channel SiSeRO-CCD

We present an X-ray characterization of a fully depleted, 725 $\mu$m thick p-channel SiSeRO-CCD. Measurements with a $^{55}$Fe source yield an energy resolution of $54 \pm 0.9$ eV ($14.6 \pm 0.25 e^{-}$) at 5.9 keV for single-pixel events, indicating that the SiSeRO amplifier preserves the intrinsic charge resolution of the CCD under multi-sample non-destructive readout. Characterization with a $^{241}$Am source extends the response to higher-energy photons, with reconstructed spectral features observed between 9-26 keV and the 59.5 keV $\gamma$ emission. These measurements, together with a muon-derived diffusion calibration, show that charge transport and diffusion are consistent with interactions spanning the full sensor depth. These results demonstrate that the SiSeRO-CCD simultaneously achieves sub-electron noise performance and efficient charge collection in a thick, fully depleted silicon detector. This combination enables X-ray spectroscopy across a broad energy range while maintaining sensitivity to faint signals.

physics.ins-det↗

arXiv2026

A Sub-electron-noise Skipper-CCD Readout ASIC with Improved Channel-to-channel Isolation and an Integrated Cryogenic Voltage Reference

The MIDNA application specific integrated circuits (ASICs) are a series of skipper-CCD readout chips fabricated in a 65 nm low-power CMOS process that implement a correlated double sampling signal processing chain based on dual-slope integrators. They are capable of working from room to cryogenic temperatures, down to 84 K. The present iteration of the ASIC has been fabricated including several design updates and the addition of an on-chip voltage reference, resulting in improved performance. This work presents the main vulnerabilities solved, the changes carried out, and the resulting performance benefits. Measurements with a skipper-CCD and the ASIC at 140 K showed that the single-electron resolution can be reached by averaging the measured charge in the analog domain using the analog pile-up technique with a readout noise as low as 0.11 erms of equivalent charge for 1200 samples. The channel-to-channel crosstalk was also characterized showing values better than -62 dB.

physics.ins-det↗

arXiv2026

Latin American HECAP Physics Briefing Book 2025

The first process for the Latin American Strategy Forum for Research Infrastructure for High Energy, Cosmology and Astroparticle Physics (LASF4RI-HECAP) came to a conclusion in October 2020, with a Physics Briefing Book (PBB) presented in (2104.06852). Here we present an updated PBB, the result of the first update of LASF4RI-HECAP. The update process began with a call for White Papers from the HECAP community. The submitted contributions were presented at the III LASF4RI for HECAP Symposium: Update of the Strategic Plan, held at ICTP-SAIFR in S\~ao Paulo in August 26-29, 2024, with the participation of the Preparatory Group, High Level Strategy Group, Funding Agencies and representatives of similar efforts from around the globe. This updated PBB was written by the Preparatory Group based mainly on 46 White Papers submitted by the community and is organized around seven working groups: Astronomy, Astrophysics and Astroparticle Physics; Cosmology; Dark Matter; Neutrinos; Electroweak and Strong Interactions, Higgs Physics, CP and Flavour Physics and BSM; Instrumentation and Computing; Advanced Training and Capacity Building. It is intended to provide the essential input for the creation of a long-term HECAP strategy in the region.

hep-ex↗

arXiv2026

X-ray characterization of fully-depleted p-channel Skipper-CCDs for the DarkNESS mission

The Dark matter Nanosatellite Equipped with Skipper Sensors (DarkNESS) mission is a 6U CubeSat designed to search for X-ray lines from decaying dark matter using Skipper-CCDs. Thick, fully-depleted p-channel Skipper-CCDs provide low readout noise and high quantum efficiency for 1-10 keV X-rays, but their X-ray performance has not yet been demonstrated in the space environment. DarkNESS will operate in low-Earth orbit, where trapped protons induce displacement damage in the sensor that increases charge-transfer inefficiency and degrades the X-ray energy resolution. This work measures the X-ray line response of Skipper-CCDs before and after proton irradiation and quantifies the associated degradation. A sensor was exposed to 217 MeV protons at a fluence of 8.4 x 10^10 protons cm^-2, corresponding to a displacement-damage dose more than an order of magnitude above the three-year expectation for representative mid-inclination and Sun-synchronous low-Earth orbits. A 55Fe source was used to compare the energy resolution of the beam-exposed quadrant to adjacent unexposed quadrants and a non-irradiated reference sensor. These measurements provide a quantitative assessment of radiation-induced spectral degradation in Skipper-CCDs and enable an estimate of the end-of-life X-ray energy resolution expected for DarkNESS operation in low-Earth orbit.

astro-ph.IM↗

arXiv2025

Light-tight skipper-CCDs for X-ray detection in space

Skipper Charge-Coupled Devices (skipper-CCDs) are pixelated silicon detectors with deep sub-electron resolution. Their radiation hardness and capability to reconstruct energy deposits with unprecedented precision make them a promising technology for space-based X-ray astronomy. In this scenario, optical and near-infrared photons may saturate the sensor, distorting the reconstructed signal. We present a light-tight shield for skipper-CCDs to suppress optical backgrounds while preserving X-ray detection efficiency. We deposited thin aluminum layers on the CCD surface using an e-beam evaporator and evaluated their blinding performance across wavelengths from 650 to 1000 nm using a monochromator, as well as the X-ray transmission using an $^{55}$Fe source. We find that 50 and 100 nm layers provide >99.6% light suppression, with no efficiency loss for 5.9 and 6.4 keV X-rays. In addition, we used Geant4 simulations to extend these results to a broader energy range and quantify the efficiency loss for different aluminum thicknesses. Results show that thin aluminum coatings are an effective, low-cost solution for optical suppression in skipper-CCDs intended for X-ray detection and space instrumentation.

astro-ph.IM↗

arXiv2025

Charge Trap Analysis in a SENSEI Skipper-CCD: Understanding Low-Energy Backgrounds in Rare-Event Searches

Skipper Charge-Coupled Devices (Skipper-CCDs) are ultra-low-threshold detectors capable of detecting energy deposits in silicon at the eV scale. Increasingly used in rare-event searches, one of the major challenges in these experiments is mitigating low-energy backgrounds. In this work, we present results on trap characterization in a silicon Skipper-CCD produced in the same fabrication run as the SENSEI experiment at SNOLAB. Lattice defects contribute to backgrounds in rare-event searches through single-electron charge trapping. To investigate this, we employ the charge-pumping technique at different temperatures to identify dipoles produced by traps in the CCD channel. We fully characterize a fraction of these traps and use this information to extrapolate their contribution to the single-electron background in SENSEI. We find that this subpopulation of traps does not contribute significantly but more work is needed to assess the impact of the traps that can not be characterized.

hep-ex↗

arXiv2025

SENSEI: A Search for Diurnal Modulation in sub-GeV Dark Matter Scattering

Dark matter particles with sufficiently large interactions with ordinary matter can scatter in the Earth's atmosphere and crust before reaching an underground detector. This Earth-shielding effect can induce a directional dependence in the dark matter flux, leading to a sidereal daily modulation in the signal rate. We perform a search for such a modulation using data from the SENSEI experiment, targeting MeV-scale dark matter. We achieve an order-of-magnitude improvement in sensitivity over previous direct-detection bounds for dark-matter masses below 1 MeV, assuming the Standard Halo Model with a Maxwell--Boltzmann velocity distribution, and constrain the amplitude of a general daily modulation signal to be below 6.8 electrons per gram per day.

hep-ex↗

arXiv2025

From Legacy to Leadership Intelligent Radio Network Planning Framework for Cell-Free Massive MIMO in B5G6G Era

The proliferation of cell-free Massive MIMO represents a transformative shift in wireless network architecture, addressing critical limitations of conventional distributed Massive MIMO systems. This paper presents an intelligent radio network planning framework that bridges legacy 5G infrastructures with future B5G/6G networks through cell-free architectures. By leveraging operational insights from existing 5G deployments, we systematically address coverage optimization, and capacity enhancement. Our scalable framework enables seamless evolution from legacy designs to next-generation cell-free systems. Through extensive simulations in dense urban environments, we demonstrate substantial improvements: 45% spectral efficiency gains, 30% interference reduction, and significantly enhanced uniform coverage. The proposed framework provides network operators with a practical roadmap for transitioning from traditional cellular architectures to demanding B5G/6G requirements while maximizing existing infrastructure investments.

eess.SY↗

arXiv2025

A compact, low-power epithermal neutron counter for lunar water detection

The detection and characterization of lunar water are critical for enabling sustainable human and robotic exploration of the Moon. Orbital neutron spectrometers, such as instruments on Lunar Prospector and the Lunar Reconnaissance Orbiter, have revealed hydrogen-rich regions near the poles but are limited by coarse spatial resolution and low counting efficiency. We present a compact, lightweight, and low-power epithermal neutron detector based on boron-coated silicon imagers, designed to probe subsurface hydrogen at decimeter scales from mobile platforms such as lunar rovers. This instrument leverages the high neutron capture cross-section of $^{10}$B to convert epithermal neutrons into detectable $\alpha$ and $^{7}$Li ions in a fully-depleted silicon imager, providing a unique event topology to identify neutrons while suppressing backgrounds. Monte Carlo simulations demonstrate that a 3 $\mu$m boron layer achieves optimal neutron detection efficiency, further enhanced with polyethylene moderation to improve sensitivity to the 0.4 eV-500 keV epithermal energy range. For a 10 cm$^2$ active area, the detector achieves sensitivity to H$_2$O weight fractions as low as 0.01 wt % in a 15 minute measurement. This scalable, portable, low-mass design is well-suited for integration into upcoming Artemis and commercial lunar rovers, providing a transformative capability for in-situ resource prospecting and ground-truth validation of orbital measurements.

physics.ins-det↗

arXiv2025

Investigation of Low-Energy Particle Remnants in High-Energy Collisions at the LHC with a Skipper-CCD detector

We deployed MOSKITA $\sim$33 m away from the CMS collision point, the first skipper-CCD detector probing low-energy particles produced in high-energy collisions at the Large Hadron Collider (LHC). In this work, we search for beam-related events using data collected in 2024 during beam-on and beam-off periods. The dataset corresponds to integrated luminosities of 113.3 fb$^{-1}$ and 1.54 nb$^{-1}$ for the proton-proton and Pb-Pb collision periods, respectively. We report observed event rates in a model-independent framework across two ionization regions: $\leq20e^-$ and $>20e^-$. For the low-energy region, we perform a likelihood analysis to test the null hypothesis of no beam-correlated signal. We found no significant correlation during proton-proton and Pb-Pb collisions. For the high-energy region, we present the energy spectra for both collision periods and compare event rates for images with and without luminosity. We observe a slight increase in the event rate following the Pb-Pb collisions, coinciding with a rise in the single-electron rate, which will be investigated in future work. Using the low-energy proton-proton results, we place 95% C.L. constraints on the mass-millicharge parameter space of millicharged particles. Overall, the results in this work demonstrate the viability of skipper-CCD technology to explore new physics at high-energy colliders and motivate future searches with more massive detectors.

hep-ex↗

arXiv2025

Characterization of the Cherenkov Photon Background for Low-Noise Silicon Detectors in Space

Future space observatories that seek to perform imaging and spectroscopy of faint astronomical sources will require ultra-low-noise detectors that are sensitive over a broad wavelength range. Silicon charge-coupled devices (CCDs), such as EMCCDs, skipper CCDs, multi-amplifier sensing (MAS) CCDs, and single-electron sensitive read out (SiSeRO) CCDs have demonstrated the ability to detect and measure single photons from X-ray energies to near the silicon band gap (~1.1 $\mu$m), making them candidate technologies for this application. In this context, we study a relatively unexplored source of low-energy background coming from Cherenkov radiation produced by energetic cosmic rays traversing a silicon detector. We present a model for Cherenkov photon production and absorption that is calibrated to laboratory data, and we use this model to characterize the residual background rate for ultra-low-noise silicon detectors in space. We study how the Cherenkov background rate depends on detector thickness, variations in solar activity, and the contribution of heavy cosmic ray species (Z > 2). We find that for thick silicon detectors, such as those required to achieve high quantum efficiency at long wavelengths, the rate of cosmic-ray-induced Cherenkov photon production is comparable to other detector and astrophysical backgrounds. We apply our Cherenkov background model to simulated spectroscopic observations of extra-solar planets, and we find that thick detectors continue to outperform their thinner counterparts at longer wavelengths despite a larger Cherenkov background rate. Furthermore, we find that minimal masking of cosmic-ray tracks continues to maximize the signal-to-noise ratio of very faint sources despite the existence of extended halos of Cherenkov photons.

astro-ph.IM↗

arXiv2025

Dynamic Beyond 5G and 6G Connectivity: Leveraging NTN and RIS Synergies for Optimized Coverage and Capacity in High-Density Environments

The increasing demand for reliable, high-capacity communication during large-scale outdoor events poses significant challenges for traditional Terrestrial Networks (TNs), which often struggle to provide consistent coverage in high-density environments. This paper presents a novel 6G radio network planning framework that integrates Non-Terrestrial Networks (NTNs) with Reconfigurable Intelligent Surfaces (RISs) to deliver ubiquitous coverage and enhanced network capacity. Our framework overcomes the limitations of conventional deployable base stations by leveraging NTN architectures, including Low Earth Orbit (LEO) satellites and passive RIS platforms seamlessly integrated with Beyond 5G (B5G) TNs. By incorporating advanced B5G technologies such as Massive Multiple Input Multiple Output (mMIMO) and beamforming, and by optimizing spectrum utilization across the C, S, and Ka bands, we implement a rigorous interference management strategy based on a dynamic SINR model. Comprehensive calculations and simulations validate the proposed framework, demonstrating significant improvements in connectivity, reliability, and cost-efficiency in crowded scenarios. This integration strategy represents a promising solution for meeting the evolving demands of future 6G networks.

cs.NI↗