arXiv subjects

Juan M. Lopez-Soler

Publications and source records attributed to Juan M. Lopez-Soler.

11 recordsLinked to original sources

arXiv2026

Performance Analysis of 5G RAN Slicing Deployment Options in Industry 4.0 Factories

This paper studies Radio Access Network (RAN) slicing strategies for 5G Industry~4.0 networks with ultra-reliable low-latency communication (uRLLC) requirements. We compare four RAN slicing deployment options that differ in slice sharing and in the degree of per-line or per-flow isolation. Unlike prior works that assume a fixed slicing structure, this work addresses how RAN slicing should be instantiated in the presence of multiple production lines and heterogeneous industrial flows. A Stochastic Network Calculus (SNC)-based analytical framework and a heuristic slice planner are used to evaluate per-flow delay guarantees and radio resource utilization. Within the considered RAN-level analytical model, the results show that, under resource scarcity, only per-flow slicing prevents delay violations, whereas slice-sharing and hybrid deployments improve aggregation efficiency at the cost of weaker protection for the most delay-critical flows. Execution-time results show that the proposed planner operates at non-real-time (Non-RT) time scales, supporting its implementation as an rApp within Open RAN (O-RAN) Non-RT RAN Intelligent Controller (RIC) control loops.

cs.NI↗

arXiv2026

How Many Qubits Can Be Teleported? Scalability of Fidelity-Constrained Quantum Applications

Quantum networks (QNs) enable qubit transfer between distant nodes through quantum teleportation, which reconstructs a quantum state at a remote node by consuming a shared Bell pair. In multi-qubit quantum applications (QApps), the teleported qubits may need to remain stored in quantum memories until execution can start, while decoherence progressively reduces their fidelity with respect to the ideal target state. Such QApps can operate only if all teleported qubits simultaneously satisfy a minimum fidelity threshold. In this paper, we study how many qubits can be teleported under this fidelity-constrained operation in a two-node QN. To this end, we define a QApp-level reliability metric as the probability that all end-to-end Bell pairs satisfy the target fidelity when the multi-qubit teleportation stage is completed. We then develop a Monte Carlo simulator that captures stochastic Bell-pair generation, Quantum Repeater (QR)-assisted entanglement distribution, and fidelity degradation. The analysis considers fiber-based and terrestrial free-space optical (FSO) quantum links, as well as representative NV-center- and trapped-ion-based quantum memories. Results show that memory coherence is the main scalability bottleneck under stringent fidelity targets, while parallel entanglement generation is essential for multi-qubit teleportation.

cs.NI↗

arXiv2025

Empirical Analysis of 5G TDD Patterns Configurations for Industrial Automation Traffic

The digital transformation driven by Industry 4.0 relies on networks that support diverse traffic types with strict deterministic end-to-end latency and mobility requirements. To meet these requirements, future industrial automation networks will use time-sensitive networking, integrating 5G as wireless access points to connect production lines with time-sensitive networking bridges and the enterprise edge cloud. However, achieving deterministic end-to-end latency remains a challenge, particularly due to the variable packet transmission delay introduced by the 5G system. While time-sensitive networking bridges typically operate with latencies in the range of hundreds of microseconds, 5G systems may experience delays ranging from a few to several hundred milliseconds. This paper investigates the potential of configuring the 5G time division duplex pattern to minimize packet transmission delay in industrial environments. Through empirical measurements using a commercial 5G system, we evaluate different TDD configurations under varying traffic loads, packet sizes and full buffer status report activation. Based on our findings, we provide practical configuration recommendations for satisfying requirements in industrial automation, helping private network providers increase the adoption of 5G.

cs.NI↗

arXiv2020

Sharing gNB components in RAN slicing: A perspective from 3GPP/NFV standards

To implement the next Generation NodeBs (gNBs) that are present in every Radio Access Network (RAN) slice subnet, Network Function Virtualization (NFV) enables the deployment of some of the gNB components as Virtual Networks Functions (VNFs). Deploying individual VNF instances for these components could guarantee the customization of each RAN slice subnet. However, due to the multiplicity of VNFs, the required amount of virtual resources will be greater compared to the case where a single VNF instance carries the aggregated traffic of all the RAN slice subnets. Sharing gNB components between RAN slice subnets could optimize the trade-off between customization, isolation and resource utilization. In this article, we shed light on the key aspects in the Third Generation Partnership Project (3GPP)/NFV standards for sharing gNB components. First, we identify four possible scenarios for sharing gNB components. Then, we analyze the impact of sharing on the customization level of each RAN slice subnet. Later, we determine the main factors that enable isolation between RAN slice subnets. Finally, we propose a 3GPP/NFV-based description model to define the lifecycle management of shared gNB components

cs.NI↗

arXiv2019

Harmonizing 3GPP and NFV description models to provide customized RAN slices in 5G networks

The standardization of Radio Access Network (RAN) in mobile networks has traditionally been led by 3GPP. However, the emergence of RAN slicing has introduced new aspects that fall outside 3GPP scope. Among them, network virtualization enables the particularization of multiple RAN behaviors over a common physical infrastructure. Using Virtualized Network Functions (VNFs) that comprise customized radio functionalities, each virtualized RAN, denominated RAN slice, could meet its specific requirements. Although 3GPP specifies the description model to manage RAN slices, it can neither particularize the behavior of a RAN slice nor leverage the NFV descriptors to define how its VNFs can accommodate its spatial and temporal traffic demands. In this article, we propose a description model that harmonizes 3GPP and ETSI-NFV viewpoints to manage RAN slices. The proposed model enables the translation of RAN slice requirements into customized virtualized radio functionalities defined through NFV descriptors. To clarify this proposal, we provide an example where three RAN slices with disruptive requirements are described following our solution.

cs.NI↗

arXiv2019

Analytic Analysis of Narrowband IoT Coverage Enhancement Approaches

The introduction of Narrowband Internet of Things (NB-IoT) as a cellular IoT technology aims to support massive Machine-Type Communications applications. These applications are characterized by massive connections from a large number of low-complexity and low-power devices. One of the goals of NB-IoT is to improve coverage extension beyond existing cellular technologies. In order to do that, NB-IoT introduces transmission repetitions and different bandwidth allocation configurations in uplink. These new transmission approaches yield many transmission options in uplink. In this paper, we propose analytical expressions that describe the influence of these new approaches in the transmission. Our analysis is based on the Shannon theorem. The transmission is studied in terms of the required Signal to Noise Ratio, bandwidth utilization, and energy per transmitted bit. Additionally, we propose an uplink link adaptation algorithm that contemplates these new transmission approaches. The conducted evaluation summarizes the influence of these approaches. Furthermore, we present the resulting uplink link adaptation from our proposed algorithm sweeping the device's coverage.

cs.NI↗

arXiv2018

NarrowBand IoT Data Transmission Procedures for Massive Machine Type Communications

Large-scale deployments of massive Machine Type Communications (mMTC) involve several challenges on cellular networks. To address the challenges of mMTC, or more generally, Internet of Things (IoT), the 3rd Generation Partnership Project has developed NarrowBand IoT (NB-IoT) as part of Release 13. NB-IoT is designed to provide better indoor coverage, support of a massive number of low-throughput devices, with relaxed delay requirements, and lower-energy consumption. NB-IoT reuses Long Term Evolution functionality with simplifications and optimizations. Particularly for small data transmissions, NB-IoT specifies two procedures to reduce the required signaling: one of them based on the Control Plane (CP), and the other on the User Plane (UP). In this work, we provide an overview of these procedures as well as an evaluation of their performance. The results of the energy consumption show both optimizations achieve a battery lifetime extension of more than 2 years for a large range in the considered cases, and up to 8 years for CP with good coverage. In terms of cell capacity relative to SR, CP achieves gains from 26% to 224%, and UP ranges from 36% to 165%. The comparison of CP and UP optimizations yields similar results, except for some specific configurations.

cs.NI↗

arXiv2017

Optimized LTE Data Transmission Procedures for IoT: Device Side Energy Consumption Analysis

The efficient deployment of Internet of Things (IoT) over cellular networks, such as Long Term Evolution (LTE) or the next generation 5G, entails several challenges. For massive IoT, reducing the energy consumption on the device side becomes essential. One of the main characteristics of massive IoT is small data transmissions. To improve the support of them, the 3GPP has included two novel optimizations in LTE: one of them based on the Control Plane (CP), and the other on the User Plane (UP). In this paper, we analyze the average energy consumption per data packet using these two optimizations compared to conventional LTE Service Request procedure. We propose an analytical model to calculate the energy consumption for each procedure based on a Markov chain. In the considered scenario, for large and small Inter-Arrival Times (IATs), the results of the three procedures are similar. While for medium IATs CP reduces the energy consumption per packet up to 87% due to its connection release optimization.

cs.NI↗

arXiv2017

Analytical Modeling for Virtualized Network Functions

Network Function Virtualization (NFV) is considered one of the key technologies for the 5G mobile networks. In NFV, network functions are implemented in software components denominated Virtual Network Functions (VNFs) running on commodity hardware. In this paper, we propose an analytical model based on an open queuing network of G/G/m queues to model VNFs with single- or multi-tier designs, and chains of VNFs. Our model is flexible and generic enough to capture the behavior of such systems. We validate our model by simulation. Specifically, we validate it for an LTE virtualized Mobility Management Entity with a three-tiered architecture use case. We also compare our model with the estate of the art, in terms of computational complexity and estimation error. The results show that our model has a computational complexity similar to the method for analyzing Jackson's networks. Additionally, our model exhibits an estimation error, measured as the relative error for the estimation of the mean response time, approximately equal to 10%, whereas for the considered baseline systems it ranges roughly from 60% to 90%.

cs.NI↗

arXiv2017

Modeling and Dimensioning of a Virtualized MME for 5G Mobile Networks

Network Function Virtualization is considered one of the key technologies for developing the future mobile networks. In this paper, we propose a theoretical framework to evaluate the performance of an LTE virtualized Mobility Management Entity (vMME) hosted in a data center. This theoretical framework consists of i) a queuing network to model the vMME in a data center, and ii) analytic expressions to estimate the overall mean system delay and the signaling workload to be processed by the vMME. We validate our mathematical model by simulation. One direct use of the proposed model is vMME dimensioning, i.e., to compute the number of vMME processing instances to provide a target system delay given the number of users in the system. Additionally, the paper includes a scalability analysis of the system. In our study, we consider the billing model and a data center setup of Amazon Elastic Compute Cloud service, and estimate experimentally the processing time of MME processing instances for different LTE control procedures. For the considered setup, our results show that a vMME is scalable for signaling workloads up to 37000 LTE control procedures per second for a target mean system delay of 1 ms. The database performance assumed imposes this limit in the system scalability.

cs.NI↗

arXiv2013

Video Tester -- A multiple-metric framework for video quality assessment over IP networks

This paper presents an extensible and reusable framework which addresses the problem of video quality assessment over IP networks. The proposed tool (referred to as Video-Tester) supports raw uncompressed video encoding and decoding. It also includes different video over IP transmission methods (i.e.: RTP over UDP unicast and multicast, as well as RTP over TCP). In addition, it is furnished with a rich set of offline analysis capabilities. Video-Tester analysis includes QoS and bitstream parameters estimation (i.e.: bandwidth, packet inter-arrival time, jitter and loss rate, as well as GOP size and I-frame loss rate). Our design facilitates the integration of virtually any existing video quality metric thanks to the adopted Python-based modular approach. Video-Tester currently provides PSNR, SSIM, ITU-T G.1070 video quality metric, DIV and PSNR-based MOS estimations. In order to promote its use and extension, Video-Tester is open and publicly available.

cs.MM↗