arXiv subjects

Juan-Carlos Rojas-Sánchez

Publications and source records attributed to Juan-Carlos Rojas-Sánchez.

13 recordsLinked to original sources

arXiv2026

Symmetry Breaking by Interfacial Dead Layers: Observation of Forbidden Self-Induced Spin-Orbit Torque in Symmetric Ferromagnets

Conventionally, spin-orbit torques (SOTs) in ferromagnets require heavy-metal layers or engineered structural asymmetry to break inversion symmetry. In this work, we report the observation of robust, self-generated SOTs in a nominally symmetric, heavy-metal-free MgO/NiFe/MgO trilayer - a geometry where such torques are theoretically forbidden. By combining harmonic Hall measurements with SQUID magnetometry and X-ray photoelectron spectroscopy, we identify the symmetry-breaking origin: a 1.8 nm magnetic dead layer at the bottom interface. Crucially, we demonstrate a quantitative agreement between our data and the drift-diffusion theory predicted by Kim and Lee, yielding a theoretically extracted dead-layer thickness (1.2 nm) which matches structural characterization. Furthermore, density-functional calculations confirm that NiFe possesses sufficient intrinsic spin Hall conductivity to support the observed spin currents. These results reframe the parasitic dead layer as a functional spintronic component, establishing a universal, all-ferromagnetic route to SOTs in standard magnetic heterostructures.

cond-mat.mes-hall↗

arXiv2026

Momentum-Resolved Tunneling Modulation Induced Giant Multistate Resistance in Antiferroelectric Multiferroic Junction

Multiferroic tunnel junctions (MFTJs), integrating ferroelectric and ferromagnetic functionalities within a single nanoscale device, hold significant promise for non-volatile, multi-state memory and innovative computing paradigms. In conventional MFTJs, tunneling resistance modulation relies primarily on ferroelectric (FE) polarization switching, which alters interfacial electric fields and shifts the Fermi level of adjacent ferromagnetic electrodes. However, achieving high tunnelelectroresistance (TER) through this approach demands strong built-in electric fields, which simultaneously hinder FE polarization switching, creating an intrinsic trade-off between reliable data reading and efficient writing. Here, we propose a dual mechanism that combines antiferroelectric (AFE) phase-transition modulation of the evanescent decay states with interfacial spin filtering based on $Fe_3GaTe_2$/bilayer-$In_2Se_3$/$Fe_3GaTe_2$ heterostructure. Beyond altering the electrostatic potential as in AFE-FE switching, the transitions between head-type and tail-type AFE states preserve the centrosymmetric potential profile yet fundamentally modulate the momentum-resolved distribution of evanescent decay rates across the Brillouin zone. When integrated with perfect spin filtering at the $Fe_3GaTe_2$/$α$-$In_2Se_3$ interface, this mechanism yields a giant TER (~$7.6\times10^3\%$), over 4 times that of conventional FE-based MFTJs, and a TMR exceeding $6.8\times10^5\%$, enhanced by two orders of magnitude over typical MFTJs. These mechanisms resolve the performance trade-off in MFTJs, enabling six distinct non-volatile resistance states at room temperature.

cond-mat.mes-hall↗

arXiv2025

Enhanced spin-to-charge conversion in La$_{0.67}$Sr$_{0.33}$MnO$_3$/NdNiO$_3$ bilayers at the nickelate metal-insulator phase transition

Phase transition materials such as NdNiO3 (NNO) when coupled with low damping ferromagnets such as La$_{0.67}$Sr$_{0.33}$MnO$_3$ (LSMO) can lead to new multi-functional material systems harnessing the interplay of charge, spin and orbital degrees of freedom. In this study, we probe the evolution of the spin-to-charge conversion in epitaxial all-oxide LSMO (12 nm)/NNO (4, 8, and 16 nm) bilayers. Using spin pumping ferromagnetic resonance we track the spin-charge conversion in the NNO layer through the paramagnetic metal to antiferromagnetic insulator transition and observe a pronounced enhancement of the inverse spin Hall effect signal at the onset of this transition. We attribute this enhancement to the electronic and magnetic disorder in NNO at the first-order phase transition, thereby providing insights into the mechanism of spin transport through the phase transition. The tunability of spin charge conversion in this low damping bilayer system offers a pathway for developing multifunctional, energy-efficient spintronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Giant and anisotropic enhancement of spin-charge conversion in double Rashba interface graphene-based quantum system

The ever-increasing demand for efficient data storage and processing has fueled the search for novel memory devices. Spintronics offers an alternative fast and efficient solution using spin-to-charge interconversion. In this work, we demonstrate a remarkable thirty-four-fold increase in spin-to-charge current conversion when incorporating a 2D epitaxial graphene monolayer between iron and platinum layers by exploring spin-pumping on-chip devices. Furthermore, we find that the spin conversion is also anisotropic. We attribute this enhancement and anisotropy to the asymmetric Rashba contributions driven by an unbalanced spin accumulation at the differently hybridized top and bottom graphene interfaces, as highlighted by ad-hoc first-principles theory. The improvement in spin-to-charge conversion as well as its anisotropy reveals the importance of interfaces in hybrid 2D-thin film systems opening up new possibilities for engineering spin conversion in 2D materials, leading to potential advances in memory, logic applications, or unconventional computing.

cond-mat.mes-hall↗

arXiv2023

Isotropic spin and inverse spin Hall effect in epitaxial (111)-oriented Pt/Co bilayers

The spin-to-charge current interconversion in bilayers composed of ferromagnetic and nonmagnetic layers with strong spin-orbit coupling has garnered considerable attention due to its exceptional potential in advancing spintronics devices for data storage and logic applications. Platinum (Pt) stands out as one of the most effective materials for generating spin current. While the spin conversion efficiency is isotropic in polycrystalline Pt samples, an ongoing debate persists regarding its dependence on the crystalline direction in single crystalline samples. In this study, we aim to comprehensively evaluate the in-plane anisotropy of spin-charge interconversion using an array of complementary Spin Hall and inverse Spin Hall techniques with both incoherent and coherent excitation. Specifically, we investigate the spin-to-charge interconversion in epitaxial, (111)-oriented, Co/Pt bilayers with low surface roughness, as resulted from x-ray experiments. By varying the thickness of the Pt layer, we gain insights into the spin-charge interconversion in epitaxial Pt and highlight the effects of the interfaces. Our results demonstrate an isotropic behavior within the limits of our detection uncertainty. This finding significantly enhances our understanding of spin conversion in one of the most relevant systems in spintronics and paves the way for future research in this field.

cond-mat.mtrl-sci↗

arXiv2023

Spin transport properties of spinel vanadate-based heterostructures

Spin-orbit coupling and breaking of inversion symmetry are necessary ingredients to enable a pure spin current-based manipulation of the magnetization via the spin-orbit torque effect. Currently, magnetic insulator oxides with non-dissipative characteristics are being explored. When combined with non-magnetic heavy metals, known for their large spin-orbit coupling, they offer promising potential for energy-efficient spin-orbitronics applications. The intrinsic electronic correlations characterizing those strongly correlated oxides hold the promises to add extra control-knobs to the desired efficient spin-wave propagation and abrupt magnetization switching phenomena. Spinel vanadate FeV2O4 (FVO) exhibits several structural phase transitions which are accompanied by an intricate interplay of magnetic, charge and orbital orderings. When grown as a thin film onto SrTiO3, the compressive strain state induces a perpendicular magnetic anisotropy, making FVO-based heterostructures desirable for spin-orbitronics applications. In this study, we have optimised the deposition of stoichiometric and epitaxial Pt/FVO heterostructures by Pulsed Laser Deposition and examined their spin-related phenomena. From angle-dependent magnetotransport measurements, we observed both Anisotropic Magnetoresistance (AMR) and Spin Hall Magnetoresistance (SMR) effects. Our findings show the SMR component as the primary contributor to the overall magnetoresistance, whose high value of 0.12% is only comparable to properly optimized oxide-based systems.

cond-mat.mtrl-sci↗

arXiv2023

Spin-to-charge conversion by spin pumping in sputtered polycrystalline Bi$_x$Se$_{1-x}$

Topological materials are of high interest due to the promise to obtain low power and fast memory devices based on efficient spin-orbit torque switching or spin-orbit magnetic state read-out. In particular, sputtered polycrystalline Bi$_x$Se$_{1-x}$ is one of the materials with more potential for this purpose since it is relatively easy to fabricate and has been reported to have a very high spin Hall angle. We study the spin-to-charge conversion in Bi$_x$Se$_{1-x}$ using the spin pumping technique coming from the ferromagnetic resonance in a contiguous permalloy thin film. We put a special emphasis on the interfacial properties of the system. Our results show that the spin Hall angle of Bi$_x$Se$_{1-x}$ has an opposite sign to the one of Pt. The charge current arising from the spin-to-charge conversion is, in contrast, lower than Pt by more than one order of magnitude. We ascribe this to the interdiffusion of Bi$_x$Se$_{1-x}$ and permalloy and the changes in chemical composition produced by this effect, which is an intrinsic characteristic of the system and is not considered in many other studies.

cond-mat.mtrl-sci↗

arXiv2022

Thermal spin current generation in the multifunctional ferrimagnet Ga$_{0.6}$Fe$_{1.4}$O$_{3}$

In recent years, multifunctional materials have attracted increasing interest for magnetic memories and energy harvesting applications. Magnetic insulating materials are of special interest for this purpose, since they allow the design of more efficient devices due to the lower Joule heat losses. In this context, Ga$_{0.6}$Fe$_{1.4}$O$_3$ (GFO) is a good candidate for spintronics applications, since it can exhibit multiferroicity and presents a spin Hall magnetoresistance similar to the one observed in a yttrium iron garnet (YIG)/Pt bilayer. Here, we explore GFO utilizing thermo-spin measurements in an on-chip approach. By carefully considering the geometry of our thermo-spin devices we are able to quantify the spin Seebeck effect and the spin current generation in a GFO/Pt bilayer, obtaining a value comparable to that of YIG/Pt. This further confirms the promises of an efficient spin current generation with the possibility of an electric-field manipulation of the magnetic properties of the system in an insulating ferrimagnetic material.

cond-mat.mtrl-sci↗

arXiv2022

Ferrimagnet GdFeCo characterization for spin-orbitronics: large field-like and damping-like torques

Spintronics is showing promising results in the search for new materials and effects to reduce energy consumption in information technology. Among these materials, ferrimagnets are of special interest, since they can produce large spin currents that trigger the magnetization dynamics of adjacent layers or even their own magnetization. Here, we present a study of the generation of spin current by GdFeCo in a GdFeCo/Cu/NiFe trilayer where the FeCo sublattice magnetization is dominant at room temperature. Magnetic properties such as the saturation magnetization are deduced from magnetometry measurements while damping constant is estimated from spin-torque ferromagnetic resonance (ST-FMR). We show that the overall damping-like (DL) and field-like (FL) effective fields as well as the associated spin Hall angles can be reliably obtained by performing the dependence of ST-FMR by an added dc current. The sum of the spin Hall angles for both the spin Hall effect (SHE) and the spin anomalous Hall effect (SAHE) symmetries are: $θ_{DL}^{SAHE} + θ_{DL}^{SHE}=-0.15 \pm 0.05$ and $θ_{FL}^{SAHE} + θ_{FL}^{SHE}=0.026 \pm 0.005$. From the symmetry of ST-FMR signals we find that $θ_{DL}^{SHE}$ is positive and dominated by the negative $θ_{DL}^{SAHE}$. The present study paves the way for tuning the different symmetries in spin conversion in highly efficient ferrimagnetic systems.

cond-mat.mes-hall↗

arXiv2021

Spin current transport in hybrid Pt / multifunctional magnetoelectric Ga0.6Fe1.4O3 bilayers

The low power manipulation of magnetization is currently a highly sought-after objective in spintronics. Non ferromagnetic large spin-orbit coupling heavy metal (NM) / ferromagnet (FM) heterostructures offer interesting elements of response to this issue, by granting the manipulation of the FM magnetization by the NM spin Hall effect (SHE) generated spin current. Additional functionalities, such as the electric field control of the spin current generation, can be offered using multifunctional ferromagnets. We have studied the spin current transfer processes between Pt and the multifunctional magnetoelectric Ga0.6Fe1.4O3 (GFO). In particular, via angular dependent magnetotransport measurements, we were able to differentiate between magnetic proximity effect (MPE)-induced anisotropic magnetoresistance (AMR) and spin Hall magnetoresistance (SMR). Our analysis shows that SMR is the dominant phenomenon at all temperatures and is the only one to be considered near room temperature, with a magnitude comparable to those observed in Pd/YIG or Pt/YIG heterostructures. These results indicate that magnetoelectric GFO thin films show promises for achieving an electric-field control of the spin current generation in NM/FM oxide-based heterostructures.

cond-mat.mtrl-sci↗

arXiv2020

Current-induced spin torques on single GdFeCo magnetic layers

Spintronics exploits spin-orbit coupling (SOC) to generate spin currents, spin torques, and, in the absence of inversion symmetry, Rashba, and Dzyaloshinskii-Moriya interactions (DMI). The widely used magnetic materials, based on 3d metals such as Fe and Co, possess a small SOC. To circumvent this shortcoming, the common practice has been to utilize the large SOC of nonmagnetic layers of 5d heavy metals (HMs), such as Pt, to generate spin currents by Spin Hall Effect (SHE) and, in turn, exert spin torques on the magnetic layers. Here, we introduce a new class of material architectures, excluding nonmagnetic 5d HMs, for high-performance spintronics operations. We demonstrate very strong current-induced torques exerted on single GdFeCo layers due to the combination of large SOC of the Gd 5d states, and inversion symmetry breaking mainly engineered by interfaces. These "self-torques" are enhanced around the magnetization compensation temperature (close to room temperature) and can be tuned by adjusting the spin absorption outside the GdFeCo layer. In other measurements, we determine the very large emission of spin current from GdFeCo. This material platform opens new perspectives to exert "self-torques" on single magnetic layers as well as to generate spin currents from a magnetic layer.

cond-mat.mes-hall↗

arXiv2018

Creation of Magnetic Skyrmion Bubble Lattices by Ultrafast Laser in Ultrathin Films

Magnetic skyrmions are topologically nontrivial spin textures which hold great promise as stable information carriers in spintronic devices at the nanoscale. One of the major challenges for developing novel skyrmion-based memory and logic devices is fast and controlled creation of magnetic skyrmions at ambient conditions. Here we demonstrate the single ultrafast (35-fs) laser pulse-induced generation of skyrmion bubbles and skyrmion bubble lattices from a ferromagnetic state in sputtered ultrathin magnetic films at room temperature. The skyrmion bubble density increases with the laser fluence in a controlled way, and it finally becomes saturated, forming disordered hexagonal lattices. Moreover, we present that the skyrmion bubble lattice configuration leads to enhanced topological stability as compared to isolated skyrmions, suggesting its promising use in data storage. Our findings shed light on the optical approach to the skyrmion bubble lattice in commonly accessible materials, paving the road toward the emerging skyrmion-based memory and synaptic devices.

cond-mat.mtrl-sci↗

arXiv2017

Thermal contribution to the spin-orbit torque in metallic/ferrimagnetic systems

We report a systematic study of current-induced perpendicular magnetization switching in W/Co$_{x}$Tb$_{1-x}$/Al thin films with strong perpendicular magnetic anisotropy. Various Co$_{x}$Tb$_{1-x}$ ferrimagnetic alloys with different magnetic compensation temperatures are presented. The systems are characterized using MOKE, SQUID and anomalous Hall resistance at different cryostat temperature ranging from 10 K to 350 K. The current-switching experiments are performed in the spin-orbit torque geometry where the current pulses are injected in plane and the magnetization reversal is detected by measuring the Hall resistance. The full reversal magnetization has been observed in all samples. Some experimental results could only be explained by the strong sample heating effect during the current pulses injection. We have found that, for a given composition $x$ and switching polarity, the devices always reach the same temperature $\textit{T}_{switch}(x)$ before switching independently of the cryostat temperature. $\textit{T}_{switch}$ seems to scale with the Curie temperature of the Co$_{x}$Tb$_{1-x}$ ferrimagnetic alloys. This explains the evolution of the critical current (and critical current density) as a function of the alloy concentration. Future application could take advantages of this heating effect which allows reducing the in-plane external field. Unexpected double magnetization switching has been observed when the heat generated by the current allows crosses the compensation temperature.

cond-mat.mtrl-sci↗