arXiv subjects

Jude Haris

Publications and source records attributed to Jude Haris.

12 recordsLinked to original sources

arXiv2026

FlexViT: A Flexible FPGA-based Accelerator for Edge Vision Transformers

Deploying Vision Transformer (ViT) models on edge platforms remains challenging due to their high computational demands and the architectural heterogeneity of modern hybrid ViT models, which incorporate both fully connected and convolutional layers. This heterogeneity leads to significant variation in tensor shapes, requiring flexible and efficient FPGA-based acceleration. In this paper, we present FlexViT, a reconfigurable FPGA accelerator for efficient ViT inference on resource-constrained edge devices. Built on the SECDA-TFLite framework, FlexViT employs a hardware-software co-design approach that maps both fully connected and convolutional layers onto a unified high-throughput INT8 GEMM engine using a runtime im2col transformation. To efficiently support diverse layer configurations, we propose a dual-mode dataflow that dynamically switches between input and weight reuse by reconfiguring the compute array at runtime. We further introduce a depth-first tiling strategy that completes accumulation in a single pass, eliminating off-chip partial-sum transfers and reducing memory bandwidth requirements. We implement FlexViT on a PYNQ-Z2 FPGA and evaluate it across a representative set of ViT models. FlexViT achieves up to 2.74x speedup on accelerator-executed layers, translating into up to 1.40x end-to-end speedup compared to CPU-only execution. The code is available at: https://github.com/gicLAB/FlexViT

cs.AR↗

arXiv2026

Towards Autonomous Accelerator Design: FPGA Accelerator Generation with SECDA

Designing FPGA-based accelerators for modern artificial intelligence workloads requires exploring a large and complex hardware design space that involves architectural parameters, data flow strategies, and memory hierarchies, making the process very time consuming. While existing methodologies such as SECDA enable rapid hardware-software co-design through SystemC simulation and FPGA execution, identifying efficient accelerator configurations remains a largely manual process requiring extensive domain knowledge. SECDA-DSE is a framework that integrates Large Language Models (LLMs) into the SECDA ecosystem to guide design space exploration (DSE) of FPGA-based accelerators. It combines a structured DSE Explorer for generating candidate architectures with an LLM Stack that performs reasoning-guided exploration using retrieval-augmented generation and chain-of-thought prompting, coupled with a feedback loop for iterative and reinforced refinement. Building on our previous work introducing SECDA-DSE, this paper extends its evaluation by generating three accelerator designs, including element-wise vector multiplication, 2D convolution, and matrix transpose, and performing end-to-end execution on FPGA hardware. The results show that SECDA-DSE can generate SECDA-compliant accelerator designs that are successfully synthesized and executed on FPGA hardware. Furthermore, the generated designs capture kernel-specific trade-offs between compute parallelism and data movement, highlighting the potential of LLM-guided exploration to adapt architectural configurations across diverse workloads while reducing exploration time and the need for extensive human expertise.

cs.AR↗

arXiv2026

Defeat the Heap: Zero-Copy Data Movement in AXI4MLIR

As custom hardware accelerators become increasingly central to machine learning workloads, efficient data transfer is critical for maximizing accelerator performance on linear algebra kernels. AXI4MLIR, an extension of the Multi-Level Intermediate Representation (MLIR) compiler framework for automated generation of host-accelerator driver code, incurs significant runtime overhead due to non-zero-copy CPU-accelerator data movement. During transfers from the host to the accelerator, data is copied from heap-allocated memory buffers into contiguous Direct Memory Access (DMA)-mapped buffers. This work identifies this copy as a redundant staging operation and eliminates it through zero-copy data movement. The optimization extends accel, an MLIR dialect introduced by AXI4MLIR, and implements lowering support that allocates buffers directly within DMA-mapped memory, thereby omitting the staging copy. We evaluate the proposed scheme using a configurable matrix-matrix multiplication accelerator and show that the zero-copy optimization reduces main memory data movement by up to 2x, increasing overall accelerator utilization.

cs.AR↗

arXiv2026

LLM-Driven Design Space Exploration of FPGA-based Accelerators

Designing field-programmable gate array (FPGA)-based accelerators for modern artificial intelligence workloads requires navigating a large and complex hardware design space encompassing architectural parameters, dataflow strategies, and memory hierarchies, making the process time-consuming and resource-intensive. While the SECDA methodology enables rapid hardware-software co-design of accelerators through SystemC simulation and FPGA execution, identifying optimal accelerator configurations still requires substantial manual effort and domain expertise. This work presents SECDA-DSE, a framework that integrates Large Language Models (LLMs) into the SECDA ecosystem, comprising tools built around SECDA to automate the design space exploration (DSE) of FPGA-based accelerators. SECDA-DSE combines a structured DSE Explorer for generating accelerator configurations with an LLM Stack that performs reasoning-guided exploration using retrieval-augmented generation and chain-of-thought prompting, alongside a feedback loop that enables reinforced fine-tuning for continuous improvement. We demonstrate the feasibility of SECDA-DSE through an initial high-level synthesis based evaluation of a generated accelerator design that meets synthesis timing and resource constraints on an Zynq-7000 FPGA.

cs.AR↗

arXiv2026

PoTAcc: A Pipeline for End-to-End Acceleration of Power-of-Two Quantized DNNs

Power-of-two (PoT) quantization significantly reduces the size of deep neural networks (DNNs) and replaces multiplications with bit-shift operations for inference. Prior work has shown that PoT-quantized DNNs can preserve accuracy for tasks such as image classification; however, their performance on resource-constrained edge devices remains insufficiently understood. While general-purpose edge CPUs and GPUs do not provide optimized backends for bit-shift operations, custom hardware accelerators can better exploit PoT quantization by implementing dedicated shift-based processing elements. However, deploying PoT-quantized models on such accelerators is challenging due to limited support in existing inference frameworks. In addition, the impact of different PoT quantization strategies on hardware design, performance, and energy efficiency during full inference has not been systematically explored. To address these challenges, we propose PoTAcc, an open-source end-to-end pipeline for accelerating and evaluating PoT-quantized DNNs on resource-constrained edge devices. PoTAcc enables seamless preparation and deployment of PoT-quantized models via TensorFlow Lite (TFLite) across heterogeneous platforms, including CPU-only systems and hybrid CPU-FPGA systems with custom accelerators. We design shift-based processing element (shift-PE) accelerators for three PoT quantization methods and implement them on two FPGA platforms. We evaluate accuracy, performance, energy efficiency, and resource utilization across a range of models, including CNNs and Transformer-based architectures. Results show that our CPU-accelerator design achieves up to 3.6x speedup and 78% energy reduction compared to CPU-only execution for PoT-quantized DNNs on PYNQ-Z2 and Kria boards. The code will be publicly released at https://github.com/gicLAB/PoTAcc

cs.AR↗

arXiv2025

F-BFQ: Flexible Block Floating-Point Quantization Accelerator for LLMs

Large Language Models (LLMs) have become increasingly prominent for daily tasks, from improving sound-totext translation to generating additional frames for the latest video games. With the help of LLM inference frameworks, such as llama.cpp, which support optimizations such as KV-caching and quantization, it is now easier than ever to deploy LLMs on edge devices. Quantization is fundamental to enable LLMs on resource-constrained edge devices, and llama.cpp utilizes block floating point (BFP) quantization to drastically reduce the bit width of weights and input tensors, the memory footprint, and the computational power required to run LLMs. LLMs are typically quantized with mixed BFP quantization across the model layers to reduce the loss of model accuracy due to quantization. Therefore, to efficiently accelerate across the layers of BFP-quantized LLMs, specialized accelerators need to support different BFP variants without reconfiguration. To address this issue, we propose a Flexible Block FloatingPoint Quantization (F-BFQ) accelerator, which can dynamically switch between two BFP quantization variants and perform matrix multiplication (MatMul) operations. Our initial F-BFQ accelerator design, deployed on the AMD Kria board, reduces inference time by 1.4x on average over the Arm NEON-based CPU execution across three BFP quantized LLMs while achieving 5.2 tokens per second (~3.9 words per second).

cs.AR↗

arXiv2025

Accelerating Transposed Convolutions on FPGA-based Edge Devices

Transposed Convolutions (TCONV) enable the up-scaling mechanism within generative Artificial Intelligence (AI) models. However, the predominant Input-Oriented Mapping (IOM) method for implementing TCONV has complex output mapping, overlapping sums, and ineffectual computations. These inefficiencies further exacerbate the performance bottleneck of TCONV and generative models on resource-constrained edge devices. To address this problem, in this paper we propose MM2IM, a hardware-software co-designed accelerator that combines Matrix Multiplication (MatMul) with col2IM to process TCONV layers on resource-constrained edge devices efficiently. Using the SECDA-TFLite design toolkit, we implement MM2IM and evaluate its performance across 261 TCONV problem configurations, achieving an average speedup of 1.9x against a dual-thread ARM Neon optimized CPU baseline. We then evaluate the performance of MM2IM on a range of TCONV layers from well-known generative models achieving up to 4.2x speedup, and compare it against similar resource-constrained TCONV accelerators, outperforming them by at least 2x GOPs/DSP. Finally, we evaluate MM2IM on the DCGAN and pix2pix GAN models, achieving up to 3x speedup and 2.4x energy reduction against the CPU baseline.

cs.AR↗

arXiv2024

Accelerating PoT Quantization on Edge Devices

Non-uniform quantization, such as power-of-two (PoT) quantization, matches data distributions better than uniform quantization, which reduces the quantization error of Deep Neural Networks (DNNs). PoT quantization also allows bit-shift operations to replace multiplications, but there are limited studies on the efficiency of shift-based accelerators for PoT quantization. Furthermore, existing pipelines for accelerating PoT-quantized DNNs on edge devices are not open-source. In this paper, we first design shift-based processing elements (shift-PE) for different PoT quantization methods and evaluate their efficiency using synthetic benchmarks. Then we design a shift-based accelerator using our most efficient shift-PE and propose PoTAcc, an open-source pipeline for end-to-end acceleration of PoT-quantized DNNs on resource-constrained edge devices. Using PoTAcc, we evaluate the performance of our shift-based accelerator across three DNNs. On average, it achieves a 1.23x speedup and 1.24x energy reduction compared to a multiplier-based accelerator, and a 2.46x speedup and 1.83x energy reduction compared to CPU-only execution. Our code is available at https://github.com/gicLAB/PoTAcc

cs.AR↗

arXiv2024

Designing Efficient LLM Accelerators for Edge Devices

The increase in open-source availability of Large Language Models (LLMs) has enabled users to deploy them on more and more resource-constrained edge devices to reduce reliance on network connections and provide more privacy. However, the high computation and memory demands of LLMs make their execution on resource-constrained edge devices challenging and inefficient. To address this issue, designing new and efficient edge accelerators for LLM inference is crucial. FPGA-based accelerators are ideal for LLM acceleration due to their reconfigurability, as they enable model-specific optimizations and higher performance per watt. However, creating and integrating FPGA-based accelerators for LLMs (particularly on edge devices) has proven challenging, mainly due to the limited hardware design flows for LLMs in existing FPGA platforms. To tackle this issue, in this paper we first propose a new design platform, named SECDA-LLM, that utilizes the SECDA methodology to streamline the process of designing, integrating, and deploying efficient FPGA-based LLM accelerators for the llama.cpp inference framework. We then demonstrate, through a case study, the potential benefits of SECDA-LLM by creating a new MatMul accelerator that supports block floating point quantized operations for LLMs. Our initial accelerator design, deployed on the PYNQ-Z1 board, reduces latency 1.7 seconds per token or ~2 seconds per word) by 11x over the dual-core Arm NEON-based CPU execution for the TinyLlama model.

cs.AR↗

arXiv2024

Data Transfer Optimizations for Host-CPU and Accelerators in AXI4MLIR

As custom hardware accelerators become more prevalent, it becomes increasingly important to automatically generate efficient host-driver code that can fully leverage the capabilities of these accelerators. This approach saves time and reduces the likelihood of errors that can occur during manual implementation. AXI4MLIR extends the MLIR compiler framework to generate host-driver code for custom accelerators for linear algebra problems. By leveraging specific compiler optimizations, we can further increase accelerator utilization. In this work we offer two key observations through a MatMul accelerator case study. First, the accelerator's compute core utilization is less than 10%, and second, the critical latency bottleneck is caused by copying data between the heap and memory-mapped DMA buffers. We identify a set of missing host code optimizations to improve the under-utilization and the latency bottleneck. Therefore, we propose three key host-code data-movement-related optimizations, extending AXI4MLIR. The optimizations provide DMA-based data allocation, coalescing of DMA transfers, and pipelining of the accelerator's load, compute, and store stages.

cs.PL↗

arXiv2023

AXI4MLIR: User-Driven Automatic Host Code Generation for Custom AXI-Based Accelerators

This paper addresses the need for automatic and efficient generation of host driver code for arbitrary custom AXI-based accelerators targeting linear algebra algorithms, an important workload in various applications, including machine learning and scientific computing. While existing tools have focused on automating accelerator prototyping, little attention has been paid to the host-accelerator interaction. This paper introduces AXI4MLIR, an extension of the MLIR compiler framework designed to facilitate the automated generation of host-accelerator driver code. With new MLIR attributes and transformations, AXI4MLIR empowers users to specify accelerator features (including their instructions) and communication patterns and exploit the host memory hierarchy. We demonstrate AXI4MLIR's versatility across different types of accelerators and problems, showcasing significant CPU cache reference reductions (up to 56%) and up to a 1.65x speedup compared to manually optimized driver code implementations. AXI4MLIR implementation is open-source and available at: https://github.com/AXI4MLIR/axi4mlir.

cs.PL↗

arXiv2021

SECDA: Efficient Hardware/Software Co-Design of FPGA-based DNN Accelerators for Edge Inference

Edge computing devices inherently face tight resource constraints, which is especially apparent when deploying Deep Neural Networks (DNN) with high memory and compute demands. FPGAs are commonly available in edge devices. Since these reconfigurable circuits can achieve higher throughput and lower power consumption than general purpose processors, they are especially well-suited for DNN acceleration. However, existing solutions for designing FPGA-based DNN accelerators for edge devices come with high development overheads, given the cost of repeated FPGA synthesis passes, reimplementation in a Hardware Description Language (HDL) of the simulated design, and accelerator system integration. In this paper we propose SECDA, a new hardware/software co-design methodology to reduce design time of optimized DNN inference accelerators on edge devices with FPGAs. SECDA combines cost-effective SystemC simulation with hardware execution, streamlining design space exploration and the development process via reduced design evaluation time. As a case study, we use SECDA to efficiently develop two different DNN accelerator designs on a PYNQ-Z1 board, a platform that includes an edge FPGA. We quickly and iteratively explore the system's hardware/software stack, while identifying and mitigating performance bottlenecks. We evaluate the two accelerator designs with four common DNN models, achieving an average performance speedup across models of up to 3.5$\times$ with a 2.9$\times$ reduction in energy consumption over CPU-only inference. Our code is available at https://github.com/gicLAB/SECDA

cs.AR↗