arXiv subjects

Juliang Li

Publications and source records attributed to Juliang Li.

17 recordsLinked to original sources

arXiv2026

A 3D-Printed Millimeter-Wave Inline Waveguide-to-Coplanar-Waveguide Transition to Enable Dense Spectrometer Arrays for Intensity Mapping Surveys

We present a 3D-printed millimeter-wave, octave-bandwidth, in-line waveguide-to-coplanar-waveguide transition designed to enable focal planes with dense arrays of on-chip spectrometers. These arrays will enable compelling surveys of the large-scale structure of the universe through millimeter-wave intensity mapping. The transition consists of a four-step ridge-waveguide transformer that couples light from a rectangular waveguide onto a coplanar waveguide via an electrical connection made with indium bump bonds. We develop a tolerance-aware optimization approach to identify high-performance transition geometries that are robust to manufacturing variations; the same formulation can be applied to other tolerance-sensitive design problems. We also describe the implementation of a custom apparatus and procedure for bump-bonding a silicon chip to a metallized 3D-printed component. We detail the fabrication of the coplanar waveguide chip and three-dimensional waveguide structure, simulations and metrology of a test device, and room temperature reflectance measurements of this device. The room temperature metrology and reflection measurements are consistent with a model that predicts a coupling efficiency of $\mathord{\sim} 95\%$ at cryogenic temperatures in the 85-170 GHz frequency range.

astro-ph.IM↗

arXiv2026

Magnonic spontaneous oscillation induced by parametric pumping

Spontaneous dynamic systems have attracted significant attention for their rich underlying physics such as phase-locking and synchronization. In this work, we report a new mechanism of generating magnetic spontaneous oscillation via parametric pumping. By applying a pump tone to excite propagating spin waves in a yttrium iron garnet delay line, four-wave mixing converts the pump mode into two phase-autonomous propagating magnon modes, i.e. a spontaneous mode with nearly twice the wavenumber of the pump mode and an idler mode with nearly zero wavenumber. This allows us to reliably generate ultrasharp spin wave dynamics with broad frequency tunability from the pump and magnetic field. We show that the spontaneous mode can be phase-locked to a probe tone, similar to an auto-oscillator. Furthermore, the spontaneous dynamics can be used to implement a high-gain magnonic parametric amplifier with a gain up to 40 dB. Our results open a new avenue for studying nonlinear magnonics and synchronization physics in propagating magnon geometry and for developing new magnonic devices.

cond-mat.mes-hall↗

arXiv2025

Room temperature reactive sputtering deposition of titanium nitride with high sheet kinetic inductance

Superconducting thin films with high intrinsic kinetic inductance $L_{k}$ are important for high-sensitivity detectors, enabling strong coupling in hybrid quantum systems, and enhancing nonlinearities in quantum devices. We report the room-temperature reactive sputtering of titanium nitride thin films with a critical temperature $T_{c}$ of \SI{3.8}{K} and a thickness of \SI{27}{nm}. Fabricated into resonators, these films exhibit a sheet kinetic inductance $L_{k, \square}$ of 394~$\textrm{pH}/\square$, as inferred from resonant frequency measurements. %from this film and measure quality factors of $4\times 10^{4}$; these quality factors are likely limited by the low resistivity wafer. X-ray diffraction analysis confirms the formation of stoichiometric TiN, with no residual unreacted titanium. The films also demonstrate a characteristic sheet resistivity of 475~$\Omega/\square$, yielding an impedance an order of magnitude higher than conventional 50~$\Omega$ resonators. This property could enhance microwave single\textendash photon coupling strength by an order of magnitude, offering transformative potential for hybrid quantum systems and quantum sensing. Furthermore, the high $L_{k}$ enables Kerr nonlinearities comparable to state\textendash of\textendash the\textendash art quantum devices. Combined with its relatively high $T_{c}$, this thin film presents a promising platform for superconducting devices, including amplifiers and qubits operating at higher temperatures.

cond-mat.supr-con↗

arXiv2023

Flux coupled tunable superconducting resonator

We present a design and implementation of frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC-loop to a current-biased feedline; the resulting screening current leads to a change of the kinetic inductance and shift in the resonance frequency. The thin film aluminum resonator consists of an interdigitated capacitor and thin line inductors forming a closed superconducting loop. The magnetic flux from the nearby current feedline induces Meissner shielding currents in the resonator loop leading to change in the kinetic part of the total inductance of the resonator. We demonstarte continuous frequency tuning within 160 MHz around the resonant frequency of 2.7 GHz. We show that: (1) frequency upconversion is achieved when kHz AC modulation signal is superimposed onto the DC bias resulting in sidebands to the resonator tone; (2) three-wave mixing is attained by parametrically pumping the nonlinear kinetic inductance using a strong RF pump signal in the feedline. The simple architecture is amenable to large array multiplexing and on-chip integration with other circuit components. The concept could be applied in flux magnetometers, upconverters, and parametric amplifiers operating above 4 Kelvin cryogenic temperatures when alternative high critical temperature material with high kinetic inductance is used.

cond-mat.supr-con↗

arXiv2023

Characterization of MKIDs for CMB observation at 220 GHz with the South Pole Telescope

We present an updated design of the 220 GHz microwave kinetic inductance detector (MKID) pixel for SPT-3G+, the next-generation camera for the South Pole Telescope. We show results of the dark testing of a 63-pixel array with mean inductor quality factor $Q_i = 4.8 \times 10^5$, aluminum inductor transition temperature $T_c = 1.19$ K, and kinetic inductance fraction $\alpha_k = 0.32$. We optically characterize both the microstrip-coupled and CPW-coupled resonators, and find both have a spectral response close to prediction with an optical efficiency of $\eta \sim 70\%$. However, we find slightly lower optical response on the lower edge of the band than predicted, with neighboring dark detectors showing more response in this region, though at level consistent with less than 5\% frequency shift relative to the optical detectors. The detectors show polarized response consistent with expectations, with a cross-polar response of $\sim 10\%$ for both detector orientations.

astro-ph.IM↗

arXiv2022

Fast high-fidelity charge readout by operating the cavity-embedded Cooper pair transistor in the Kerr bistable regime

Operating the cavity-embedded Cooper pair transistor (cCPT) in the Kerr bistable regime, we demonstrate single-shot resolution between two charge states that are $0.09e$ apart. The measurement is performed with 94$\%$ fidelity in a duration of 3 $\mu$s. The drive power at which the measurement is performed corresponds to only 20 intracavity photons on average in the high oscillation amplitude state of the cCPT, which is orders-of-magnitude smaller than that in rf-SETs. We find that the limiting factor for this mode of operation of the cCPT is the spontaneous fluctuation-induced switching between the two metastable oscillation amplitude states. We present empirical data on the variation of the switching dynamics with drive parameters and cCPT DC bias.

quant-ph↗

arXiv2022

Ion-beam Assisted Sputtering of Titanium Nitride Thin Films

Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In previous work on niobium nitride, ion beam-assisted sputtering (IBAS) reduced nitrogen sensitivity during deposition in tandem with an increase in nominal critical temperature. We have deposited thin films of titanium nitride by both, the conventional method of DC reactive magnetron sputtering and the IBAS method and compare their superconducting critical temperatures Tc as functions of thickness, sheet resistance, and nitrogen flow rate. We perform electrical and structural characterizations by electric transport and X-ray diffraction measurements. Compared to the conventional method of reactive sputtering, the IBAS technique has demonstrated a 10% increase in nominal critical temperature and 33% reduced sensitivity to nitrogen flow, without noticeable variation in the lattice structure. Additionally, we explore the behavior of superconducting Tc in ultra-thin films. Trends in films grown at high nitrogen concentrations follow predictions of mean-field theory in disordered films and show suppression of superconducting Tc due to geometric effects, while nitride films grown at low nitrogen concentrations strongly deviate from the theoretical models.

cond-mat.supr-con↗

arXiv2022

Feedback stabilization of the resonant frequency in tunable microwave cavities with single-photon occupancy

We successfully demonstrate low-frequency noise suppression in the resonant frequency fluctuations of a cavity-embedded Cooper pair transistor (cCPT) driven at single-photon occupancy. In particular, we report a reduction in the resonant frequency fluctuations caused by the internal charge noise over a bandwidth of $\sim$1.4 kHz when the cavity is driven at an average photon number $n=10$, and a bandwidth of 11 Hz for average $n=1$. The gate-dependent tunability of the cCPT allows us to implement a feedback-scheme, derived from the Pound-Drever-Hall locking technique. This reduces fluctuations due to intrinsic charge-noise, which otherwise interferes with the cCPT's operation as a near quantum-limited electrometer. We believe our technique can be generalized to achieve frequency stabilization in tunable microwave resonators that play a vital role in today's quantum computing architecture, thereby moderating the limitations in detection caused by the intrinsic $1/f$-noise on such circuit devices. The work discusses the various aspects relating to the operation of a fully functional feedback loop down to the single-photon level.

quant-ph↗

arXiv2021

Broadband solenoidal haloscope for terahertz axion detection

We introduce the Broadband Reflector Experiment for Axion Detection (BREAD) conceptual design and science program. This haloscope plans to search for bosonic dark matter across the [10$^{-3}$, 1] eV ([0.24, 240] THz) mass range. BREAD proposes a cylindrical metal barrel to convert dark matter into photons, which a novel parabolic reflector design focuses onto a photosensor. This unique geometry enables enclosure in standard cryostats and high-field solenoids, overcoming limitations of current dish antennas. A pilot 0.7 m$^{2}$ barrel experiment planned at Fermilab is projected to surpass existing dark photon coupling constraints by over a decade with one-day runtime. Axion sensitivity requires $<10^{-20}$ W/$\sqrt{\textrm{Hz}}$ sensor noise equivalent power with a 10 T solenoid and 10 m$^{2}$ barrel. We project BREAD sensitivity for various sensor technologies and discuss future prospects.

physics.ins-det↗

arXiv2021

Development of MKIDs for measurement of the Cosmic Microwave Background with the South Pole Telescope

We present details of the design, simulation, and initial test results of prototype detectors for the fourth-generation receiver of the South Pole Telescope (SPT). Optimized for the detection of key secondary anisotropies of the cosmic microwave background (CMB), SPT-3G+ will measure the temperature and polarization of the mm/sub-mm sky at 220, 285, and 345 GHz, beyond the peak of the CMB blackbody spectrum. The SPT-3G+ focal plane will be populated with microwave kinetic inductance detectors (MKIDs), allowing for significantly increased detector density with reduced cryogenic complexity. We present simulation-backed designs for single-color dual-polarization MKID pixels at each SPT-3G+ observation frequency. We further describe design choices made to promote resonator quality and uniformity, enabling us to maximize the available readout bandwidth. We also discuss aspects of the fabrication process that enable rapid production of these devices and present an initial dark characterization of a series of prototype devices.

astro-ph.IM↗

arXiv2021

Retrieving Quality Factors for Reflection & Transmission Measurements

This article presents pedagogical explanation of retrieving the resonance parameters $Q_{L}$, $Q_{o}$ and $Q_{c}$ from both reflection and transmission measurement of microwave resonator. Here $Q_{L}$ stands for the total or loaded quality factor (Q), $Q_{o}$ is the internal Q and $Q_{c}$ is the coupling or external Q. Matlab Code based on the methods is available for download for direct calculation of the Qs.\cite{lighq}

physics.app-ph↗

arXiv2021

Fast and Ultrasensitive Electrometer Operating at the Single-Photon Level

We demonstrate fast and ultrasensitive charge detection with a cavity-embedded Cooper pair transistor (cCPT) via dispersive readout of its Josephson inductance. We report a minimum charge sensitivity of $14$ $\mu e/\sqrt{\mathrm{Hz}}$ with a detection bandwidth on the order of $1$ MHz using $16$ attowatts of power, corresponding to the single-photon level of the cavity. In addition, our measured sensitivities are within a factor of $5$ of the quantum limit for this device. The single-photon-level sensitivity of the cCPT is comparable to that of the rf-SET, which typically operates using picowatts of power corresponding to hundreds of thousands of photons in its tank circuit. Our results support the feasibility of using the cCPT to mediate an optomechanical interaction that reaches the single-photon strong coupling regime.

cond-mat.mes-hall↗

arXiv2020

A Nonlinear Charge- and Flux-Tunable Cavity Derived from an Embedded Cooper Pair Transistor

We introduce the cavity-embedded Cooper pair transistor (cCPT), a device which behaves as a highly nonlinear microwave cavity whose resonant frequency can be tuned both by charging a gate capacitor and by threading flux through a SQUID loop. We characterize this device and find excellent agreement between theory and experiment. A key difficulty in this characterization is the presence of frequency fluctuations comparable in scale to the cavity linewidth, which deform our measured resonance circles in accordance with recent theoretical predictions [Brock et al., Phys. Rev. Applied 14, 054026 (2020)]. By measuring the power spectral density of these frequency fluctuations at carefully chosen points in parameter space, we find that they are primarily a result of the $1/f$ charge and flux noise common in solid state devices. Notably, we also observe key signatures of frequency fluctuations induced by quantum fluctuations in the cavity field via the Kerr nonlinearity.

cond-mat.mes-hall↗

arXiv2020

Protecting a Bosonic Qubit with Autonomous Quantum Error Correction

To build a universal quantum computer from fragile physical qubits, effective implementation of quantum error correction (QEC) is an essential requirement and a central challenge. Existing demonstrations of QEC are based on a schedule of discrete error syndrome measurements and adaptive recovery operations. These active routines are hardware intensive, prone to introducing and propagating errors, and expected to consume a vast majority of the processing power in a large-scale quantum computer. In principle, QEC can be realized autonomously and continuously by tailoring dissipation within the quantum system, but this strategy has remained challenging so far. Here we encode a logical qubit in Schr\"odinger cat-like multiphoton states of a superconducting cavity, and demonstrate a corrective dissipation process that directly stabilizes an error syndrome operator: the photon number parity. Implemented with continuous-wave control fields only, this passive protocol realizes autonomous correction against single-photon loss and boosts the coherence time of the multiphoton qubit by over a factor of two. Notably, QEC is realized in a modest hardware setup with neither high-fidelity readout nor fast digital feedback, in contrast to the technological sophistication required for prior QEC demonstrations. Compatible with other error suppression and phase stabilization techniques, our experiment suggests reservoir engineering as a resource-efficient alternative or supplement to active QEC in future quantum computing architectures.

quant-ph↗

arXiv2017

Social Media Writing Style Fingerprint

We present our approach for computer-aided social media text authorship attribution based on recent advances in short text authorship verification. We use various natural language techniques to create word-level and character-level models that act as hidden layers to simulate a simple neural network. The choice of word-level and character-level models in each layer was informed through validation performance. The output layer of our system uses an unweighted majority vote vector to arrive at a conclusion. We also considered writing bias in social media posts while collecting our training dataset to increase system robustness. Our system achieved a precision, recall, and F-measure of 0.82, 0.926 and 0.869 respectively.

cs.CL↗

arXiv2013

A Single-Cooper-Pair Josephson Laser

The advent of quantum optical techniques based on superconducting circuits has opened new regimes in the study of the non-linear interaction of light with matter. Of particular interest has been the creation of non-classical states of light, which are essential for continuous-variable quantum information processing, and could enable quantum-enhanced measurement sensitivity. Here we demonstrate a device consisting of a superconducting artificial atom, the Cooper pair transistor, embedded in a superconducting microwave cavity that may offer a path toward simple, continual production of non-classical photons. By applying a dc voltage to the atom, we use the ac Josephson effect to inject photons into the cavity. The backaction of the photons on single-Cooper-pair tunneling events results in a new regime of simultaneous quantum coherent transport of Cooper pairs and microwave photons. This single-pair Josephson laser offers great potential for the production of amplitude-squeezed photon states and a rich environment for the study of the quantum dynamics of nonlinear systems.

cond-mat.supr-con↗

arXiv2009

The Equations of Quantum Feedback Control in the Regime of Good Control

We derive the equations of motion describing the feedback control of quantum systems in the regime of "good control", in which the control is sufficient to keep the system close to the desired state. One can view this regime as the quantum equivalent of the "linearized" regime for feedback control of classical nonlinear systems. Strikingly, while the dynamics of a single qubit in this regime is indeed linear, that of all larger systems remains nonlinear, in contrast to the classical case. As a first application of these equations, we determine the steady-state performance of feedback protocols for a single qubit that use unbiased measurements.

quant-ph↗