SearcharxivSearch

arXiv subjects

Julie A. McCann

Publications and source records attributed to Julie A. McCann.

At least 19 recordsLinked to original sources

Dense Soft Weighting for Radar Ego-Velocity Estimation

Sensing ego-velocity estimation is fundamental to state estimation in visually degraded environments, where camera- and LiDAR-based pipelines can become unreliable. Millimetre-wave radar is well suited to these conditions because it provides direct Doppler velocity sensing and remains robust to poor illumination, textureless scenes, and airborne particulates. However, conventional radar ego-velocity pipelines typically apply constant false alarm rate (CFAR) thresholding to convert dense radar spectra into sparse point clouds, prematurely discarding sub-threshold returns that may still retain useful Doppler motion cues. We present Dense Soft Weighting, an analytic radar front-end that maps every range-Doppler cell to a continuous confidence metric rather than enforcing a binary detection threshold. Ego-velocity is then estimated using a deterministic robust weighted least-squares formulation, while the same weighted measurements provide a closed-form, measurement-derived velocity covariance for integration with a shared inertial back-end. The method requires no platform-specific training data or learning-based uncertainty model, supporting transfer across single-chip radar configurations. Across two public datasets and one self-collected dataset, Dense Soft Weighting reduces mean absolute pose error by 31-45% relative to the strongest CFAR point-cloud baseline under an identical inertial back-end, while running in real time on embedded hardware.

cs.RO

Dual-Security for Indoor OFDM-ISAC Systems via Temporal Artificial Noise

With the rapid development of integrated sensing and communication (ISAC) as a key enabler for future wireless networks, ensuring the security of both communication and sensing functions has become increasingly important. Current secure ISAC studies focus restrictively either on the communication or the sensing security, but not both. To bridge this gap, this paper investigates security for both, i.e., dual-security, in indoor orthogonal frequency division multiplexing (OFDM) based ISAC systems. Specifically, we consider a scenario in which a sensing user (SU) is authorised for sensing but may eavesdrop on communication data, while a communication user (CU) is authorised for communication but may perform unauthorised sensing. We chose this scenario as the pathological case where an authorised eavesdropper has more information and is more effective than an unauthorised one. To address this case, we propose the use of temporal artificial noise (AN) to prevent malicious CU sensing by enlarging its time-domain sensing error, and simultaneously degrade SU data eavesdropping by reducing its frequency-domain signal-to-noise-plus-interference ratio (SINR) with standard OFDM receiver processing. Meanwhile, our proposed scheme guarantees the sensing performance of the SU and the communication performance of the CU. We present numerical results that demonstrate AN can effectively provide dual protection for sensing and communication in OFDM-ISAC systems while guaranteeing the performance of legitimate users.

eess.SP

Digital Twin Synchronization Over Mobile Embodied AI Network With Agentic Intelligence

Efficient digital twin (DT) synchronization relies on maintaining high-fidelity virtual representations with minimal age of information (AoI). However, the synergistic potential of cooperative sensing and autonomous mobility of the sensing agent remains underexplored in existing DT synchronization frameworks. In this paper, we propose an agentic AI-empowered mobile embodied AI network (MEAN) framework for DT synchronization. In the proposed hybrid architecture, the base station (BS) conducts global orchestration, while the agents autonomously execute a five-stage closed-loop workflow: move-to-sense, cooperative sensing, onboard semantic processing, channel-aware mobility, and uplink transmission. To optimize synchronization performance, we formulate a joint topology dispatching and multidimensional resource allocation problem aimed at minimizing the maximum twin deviation across regions, subject to heterogeneous sensing fidelity and energy budget constraints. To tackle this, we develop a hierarchical two-layer optimization algorithm, where the outer-layer refines multi-agent assignment via a dynamic matching game, and the inner-layer iteratively optimizes the continuous resources. Extensive simulation results verify the convergence of the proposed algorithm and demonstrate its substantial superiority over multiple baseline schemes in reducing synchronization deviation. Furthermore, the results reveal that semantic compression serves as a vital substitute for channel resources in latency reduction under constrained bandwidth, while autonomous velocity adaptation provides an essential degree of freedom for the system to navigate the fundamental energy-time trade-off.

cs.IT

GenHPE: Generative Counterfactuals for 3D Human Pose Estimation with Radio Frequency Signals

Human pose estimation (HPE) detects the positions of human body joints for various applications. Compared to using cameras, HPE using radio frequency (RF) signals is non-intrusive and more robust to adverse conditions, exploiting the signal variations caused by human interference. However, existing studies focus on single-domain HPE confined by domain-specific confounders, which cannot generalize to new domains and result in diminished HPE performance. Specifically, the signal variations caused by different human body parts are entangled, containing subject-specific confounders. RF signals are also intertwined with environmental noise, involving environment-specific confounders. In this paper, we propose GenHPE, a 3D HPE approach that generates counterfactual RF signals to eliminate domain-specific confounders. GenHPE trains generative models conditioned on human skeleton labels, learning how human body parts and confounders interfere with RF signals. We manipulate skeleton labels (i.e., removing body parts) as counterfactual conditions for generative models to synthesize counterfactual RF signals. The differences between counterfactual signals approximately eliminate domain-specific confounders and regularize an encoder-decoder model to learn domain-independent representations. Such representations help GenHPE generalize to new subjects/environments for cross-domain 3D HPE. We evaluate GenHPE on three public datasets from WiFi, ultra-wideband, and millimeter wave. Experimental results show that GenHPE outperforms state-of-the-art methods and reduces estimation errors by up to 52.2mm for cross-subject HPE and 10.6mm for cross-environment HPE.

cs.CV

WiMANS: A Benchmark Dataset for WiFi-based Multi-user Activity Sensing

WiFi-based human sensing has exhibited remarkable potential to analyze user behaviors in a non-intrusive and device-free manner, benefiting applications as diverse as smart homes and healthcare. However, most previous works focus on single-user sensing, which has limited practicability in scenarios involving multiple users. Although recent studies have begun to investigate WiFi-based multi-user sensing, there remains a lack of benchmark datasets to facilitate reproducible and comparable research. To bridge this gap, we present WiMANS, to our knowledge, the first dataset for multi-user sensing based on WiFi. WiMANS contains over 9.4 hours of dual-band WiFi Channel State Information (CSI), as well as synchronized videos, monitoring simultaneous activities of multiple users. We exploit WiMANS to benchmark the performance of state-of-the-art WiFi-based human sensing models and video-based models, posing new challenges and opportunities for future work. We believe WiMANS can push the boundaries of current studies and catalyze the research on WiFi-based multi-user sensing.

eess.SP

RFTacho: Non-intrusive RF monitoring of rotating machines

Measuring rotation speed is essential to many engineering applications; it elicits faults undetectable by vibration monitoring alone and enhances the vibration signal analysis of rotating machines. Optical, magnetic or mechanical Tachometers are currently state-of-art. Their limitations are they require line-of-sight, direct access to the rotating object. This paper proposes RFTacho, a rotation speed measurement \emph{system} that leverages novel hardware and signal processing algorithms to produce highly accurate readings conveniently. RFTacho uses RF Orbital Angular Momentum (OAM) waves to measure rotation speed of multiple machines simultaneously with no requirements from the machine's properties. OAM antennas allow it to operate in high-scattering environments, commonly found in industries, as they are resilient to de-polarization compared to linearly polarized antennas. RFTacho achieves this by using two novel signal processing algorithms to extract the rotation speed of several rotating objects simultaneously amidst noise arising from high-scattering environments, non-line-of-sight scenarios and dynamic environmental conditions with a resolution of $1 rpm$. We test RFTacho on several real-world machines like fans, motors, air conditioners. Results show that RFTacho has avg. error of $<0.5\%$ compared to ground truth. We demonstrate RFTacho's simultaneous multiple-object measurement capability that other tachometers do not have. Initial experiments show that RFTacho can measure speeds as high as 7000 rpm (theoretically 60000 rpm) with high resiliency at different coverage distances and orientation angles, requiring only 150 mW transmit power while operating in the 5 GHz license-exempt band. RFTacho is the first RF-based sensing system that combines OAM waves and novel processing approaches to measure the rotation speed of multiple machines simultaneously in a non-intrusive way.

eess.SP

IRONWAN: Increasing Reliability of Overlapping Networks in LoRaWAN

LoRaWAN deployments follow an ad-hoc deployment model that has organically led to overlapping communication networks, sharing the wireless spectrum, and completely unaware of each other. LoRaWAN uses ALOHA-style communication where it is almost impossible to schedule transmission between networks belonging to different owners properly. The inability to schedule overlapping networks will cause inter-network interference, which will increase node-to-gateway message losses and gateway-to-node acknowledgement failures. This problem is likely to get worse as the number of LoRaWAN networks increase. In response to this problem, we propose IRONWAN, a wireless overlay network that shares communication resources without modifications to underlying protocols. It utilises the broadcast nature of radio communication and enables gateway-to-gateway communication to facilitate the search for failed messages and transmit failed acknowledgements already received and cached in overlapping network's gateways. IRONWAN uses two novel algorithms, a Real-time Message Inter-arrival Predictor, to highlight when a server has not received an expected uplink message. The Interference Predictor ensures that extra gateway-to-gateway communication does not negatively impact communication bandwidth. We evaluate IRONWAN on a 1000-node simulator with up to ten gateways and a 10-node testbed with 2-gateways. Results show that IRONWAN can achieve up to 12\% higher packet delivery ratio (PDR) and total messages received per node while increasing the minimum PDR by up to 28\%. These improvements save up to 50\% node's energy. Finally, we demonstrate that IRONWAN has comparable performance to an optimal solution (wired, centralised) but with 2-32 times lower communication costs. IRONWAN also has up to 14\% better PDR when compared to FLIP, a wired-distributed gateway-to-gateway protocol in certain scenarios.

cs.NI

Resource Allocation for NOMA-based LPWA Networks Powered by Energy Harvesting

In this paper, we explore perpetual, scalable, Low-powered Wide-area networks (LPWA). Specifically we focus on the uplink transmissions of non-orthogonal multiple access (NOMA)-based LPWA networks consisting of multiple self-powered nodes and a NOMA-based single gateway. The self-powered LPWA nodes use the "harvest-then-transmit" protocol where they harvest energy from ambient sources (solar and radio frequency signals), then transmit their signals. The main features of the studied LPWA network are different transmission times-on-air, multiple uplink transmission attempts, and duty cycle restrictions. The aim of this work is to maximize the time-averaged sum of the uplink transmission rates by optimizing the transmission time-on-air allocation, the energy harvesting time allocation and the power allocation; subject to a maximum transmit power and to the availability of the harvested energy. We propose a low complex solution which decouples the optimization problem into three sub-problems: we assign the LPWA node transmission times (using either the fair or unfair approaches), we optimize the energy harvesting (EH) times using a one-dimensional search method, and optimize the transmit powers using a concave-convex (CCCP) procedure. In the simulation results, we focus on Long Range (LoRa) networks as a practical example LPWA network. We validate our proposed solution and we observe a $15\%$ performance improvement when using NOMA.

eess.SP

Dataset: LoED: The LoRaWAN at the Edge Dataset

This paper presents the LoRaWAN at the Edge Dataset (LoED), an open LoRaWAN packet dataset collected at gateways. Real-world LoRaWAN datasets are important for repeatable sensor-network and communications research and evaluation as, if carefully collected, they provide realistic working assumptions. LoED data is collected from nine gateways over a four month period in a dense urban environment. The dataset contains packet header information and all physical layer properties reported by gateways such as the CRC, RSSI, SNR and spreading factor. Files are provided to analyse the data and get aggregated statistics. The dataset is available at: doi.org/10.5281/zenodo.4121430

cs.NI

Control Communication Co-Design for Wide Area Cyber-Physical Systems

Wide Area Cyber-Physical Systems (WA-CPSs) are a class of control systems that integrate low-powered sensors, heterogeneous actuators and computer controllers into large infrastructure that span multi-kilometre distances. Current wireless communication technologies are incapable of meeting the communication requirements of range and bounded delays needed for the control of WA-CPSs. To solve this problem, we use a Control-Communication Co-design approach for WA-CPSs, that we refer to as the $C^3$ approach, to design a novel Low-Power Wide Area (LPWA) MAC protocol called \textit{Ctrl-MAC} and its associated event-triggered controller that can guarantee the closed-loop stability of a WA-CPS. This is the first paper to show that LPWA wireless communication technologies can support the control of WA-CPSs. LPWA technologies are designed to support one-way communication for monitoring and are not appropriate for control. We present this work using an example of a water distribution network application which we evaluate both through a co-simulator (modelling both physical and cyber subsystems) and testbed deployments. Our evaluation demonstrates full control stability, with up to $50$\% better packet delivery ratios and $80$\% less average end-to-end delays when compared to a state of the art LPWA technology. We also evaluate our scheme against an idealised, wired, centralised, control architecture and show that the controller maintains stability and the overshoots remain within bounds.

eess.SY

Contact-Aware Opportunistic Data Forwarding in Disconnected LoRaWAN Mobile Networks

LoRaWAN is one of the leading Low Power Wide Area Network (LPWAN) architectures. It was originally designed for systems consisting of static sensor or Internet of Things (IoT) devices and static gateways. It was recently updated to introduce new features such as nano-second timestamps which open up applications to enable LoRaWAN to be adopted for mobile device tracking and localisation. In such mobile scenarios, devices could temporarily lose communication with the gateways because of interference from obstacles or deep fading, causing throughput reduction and delays in data transmission. To overcome this problem, we propose a new data forwarding scheme. Instead of holding the data until the next contact with gateways, devices can forward their data to nearby devices that have a higher probability of being in contact with gateways. We propose a new network metric called Real-Time Contact-Aware Expected Transmission Count (RCA-ETX) to model this contact probability in real-time. Without making any assumption on mobility models, this metric exploits data transmission delays to model complex device mobility. We also extend RCA-ETX with a throughput-optimal stochastic backpressure routing scheme and propose Real-Time Opportunistic Backpressure Collection (ROBC), a protocol to counter the stochastic behaviours resulting from the dynamics associated with mobility. To apply our approaches seamlessly to LoRaWAN-enabled devices, we further propose two new LaRaWAN classes, namely Modified Class-C and Queue-based Class-A. Both of them are compatible with LoRaWAN Class-A devices. Our data-driven experiments, based on the London bus network, show that our approaches can reduce data transmission delays up to $25\%$ and provide a $53\%$ throughput improvement in data transfer performance.

cs.NI

The Limits of LoRaWAN in Event-Triggered Wireless Networked Control Systems

Wireless sensors and actuators offer benefits to large industrial control systems. The absence of wires for communication reduces the deployment cost, maintenance effort, and provides greater flexibility for sensor and actuator location and system architecture. These benefits come at a cost of a high probability of communication delay or message loss due to the unreliability of radio-based communication. This unreliability poses a challenge to contemporary control systems that are designed with the assumption of instantaneous and reliable communication. Wireless sensors and actuators create a paradigm shift in engineering energy-efficient control schemes coupled with robust communication schemes that can maintain system stability in the face of unreliable communication. This paper investigates the feasibility of using the low-power wide-area communication protocol LoRaWAN with an event-triggered control scheme through modelling in Matlab. We show that LoRaWAN is capable of meeting the maximum delay and message loss requirements of an event-triggered controller for certain classes of applications. We also expose the limitation in the use of LoRaWAN when message size or communication range requirements increase or the underlying physical system is exposed to significant external disturbances.

cs.NI

The Separator, a Two-Phase Oil and Water Gravity CPS Separator Testbed

Industrial Control Systems (ICS) are evolving with advances in new technology. The addition of wireless sensors and actuators and new control techniques means that engineering practices from communication systems are being integrated into those used for control systems. The two are engineered in very different ways. Neither engineering approach is capable of accounting for the subtle interactions and interdependence that occur when the two are combined. This paper describes our first steps to bridge this gap, and push the boundaries of both computer communication system and control system design. We present The Separator testbed, a Cyber-Physical testbed enabling our search for a suitable way to engineer systems that combine both computer networks and control systems.

cs.OH

Performance Analysis of Clustered LoRa Networks

In this paper, we investigate the uplink transmission performance of low-power wide-area (LPWA) networks with regards to coexisting radio modules. We adopt long range (LoRa) radio technique as an example of the network of focus even though our analysis can be easily extended to other situations. We exploit a new topology to model the network, where the node locations of LoRa follow a Poisson cluster process (PCP) while other coexisting radio modules follow a Poisson point process (PPP). Unlike most of the performance analysis based on stochastic geometry, we take noise into consideration. More specifically, two models, with a fixed and a random number of active LoRa nodes in each cluster, respectively, are considered. To obtain insights, both the exact and simple approximated expressions for coverage probability are derived. Based on them, area spectral efficiency and energy efficiency are obtained. From our analysis, we show how the performance of LPWA networks can be enhanced through adjusting the density of LoRa nodes around each LoRa receiver. Moreover, the simulation results unveil that the optimal number of active LoRa nodes in each cluster exists to maximize the area spectral efficiency.

cs.IT

Resource Allocation in Wireless Powered IoT Networks

In this paper, efficient resource allocation for the uplink transmission of wireless powered IoT networks is investigated. We adopt LoRa technology as an example in the IoT network, but this work is still suitable for other communication technologies. Allocating limited resources, like spectrum and energy resources, among a massive number of users faces critical challenges. We consider grouping wireless powered IoT users into available channels first and then investigate power allocation for users grouped in the same channel to improve the network throughput. Specifically, the user grouping problem is formulated as a many to one matching game. It is achieved by considering IoT users and channels as selfish players which belong to two disjoint sets. Both selfish players focus on maximizing their own utilities. Then we propose an efficient channel allocation algorithm (ECAA) with low complexity for user grouping. Additionally, a Markov Decision Process (MDP) is used to model unpredictable energy arrival and channel conditions uncertainty at each user, and a power allocation algorithm is proposed to maximize the accumulative network throughput over a finite-horizon of time slots. By doing so, we can distribute the channel access and dynamic power allocation local to IoT users. Numerical results demonstrate that our proposed ECAA algorithm achieves near-optimal performance and is superior to random channel assignment, but has much lower computational complexity. Moreover, simulations show that the distributed power allocation policy for each user is obtained with better performance than a centralized offline scheme.

cs.IT

Low-Power Wide-Area Networks for Sustainable IoT

Low-power wide-area (LPWA) networks are attracting extensive attention because of their abilities to offer low-cost and massive connectivity to Internet of Things (IoT) devices distributed over wide geographical areas. This article provides a brief overview on the existing LPWA technologies and useful insights to aid the large-scale deployment of LPWA networks. Particularly, we first review the currently competing candidates of LPWA networks, such as narrowband IoT (NB-IoT) and long range (LoRa), in terms of technical fundamentals and large-scale deployment potential. Then we present two implementation examples on LPWA networks. By analyzing the field-test results, we identify several challenges that prevent LPWA technologies moving from the theory to wide-spread practice.

cs.IT

Antilizer: Run Time Self-Healing Security for Wireless Sensor Networks

Wireless Sensor Network (WSN) applications range from domestic Internet of Things systems like temperature monitoring of homes to the monitoring and control of large-scale critical infrastructures. The greatest risk with the use of WSNs in critical infrastructure is their vulnerability to malicious network level attacks. Their radio communication network can be disrupted, causing them to lose or delay data which will compromise system functionality. This paper presents Antilizer, a lightweight, fully-distributed solution to enable WSNs to detect and recover from common network level attack scenarios. In Antilizer each sensor node builds a self-referenced trust model of its neighbourhood using network overhearing. The node uses the trust model to autonomously adapt its communication decisions. In the case of a network attack, a node can make neighbour collaboration routing decisions to avoid affected regions of the network. Mobile agents further bound the damage caused by attacks. These agents enable a simple notification scheme which propagates collaborative decisions from the nodes to the base station. A filtering mechanism at the base station further validates the authenticity of the information shared by mobile agents. We evaluate Antilizer in simulation against several routing attacks. Our results show that Antilizer reduces data loss down to 1% (4% on average), with operational overheads of less than 1% and provides fast network-wide convergence.

cs.CR

Poster Abstract: LPWA-MAC - a Low Power Wide Area network MAC protocol for cyber-physical systems

Low-Power Wide-Area Networks (LPWANs) are being successfully used for the monitoring of large-scale systems that are delay-tolerant and which have low-bandwidth requirements. The next step would be instrumenting these for the control of Cyber-Physical Systems (CPSs) distributed over large areas which require more bandwidth, bounded delays and higher reliability or at least more rigorous guarantees therein. This paper presents LPWA-MAC, a novel Low Power Wide-Area network MAC protocol, that ensures bounded end-to-end delays, high channel utility and supports many of the different traffic patterns and data-rates typical of CPS.

eess.SY