arXiv subjects

Juliette Monsel

Publications and source records attributed to Juliette Monsel.

At least 19 recordsLinked to original sources

arXiv2026

Optomechanical systems with a Fano membrane in the middle

Conventional membrane-in-the-middle (MIM) optomechanical systems offer limited control over the optical linewidth, which can limit their performance when operating in the unresolved-sideband regime. We investigate cavity optomechanics with a photonic-crystal Fano membrane placed at the center of a Fabry-P\'erot (FP) cavity. In contrast to a conventional dielectric membrane, the photonic-crystal membrane supports a localized optical resonance, which hybridizes with the cavity field and enables spectral engineering of the relevant optical modes. Besides the usual dispersive optomechanical coupling associated with cavity-length changes, the membrane motion also modifies the Fano-mode resonance and its hybridization with the cavity field. We consider two limits set by the membrane reflectivity: a transparent-membrane regime with a single FP-like mode, and a reflective-membrane regime with two coupled subcavity modes. In the latter case, only the symmetric cavity mode hybridizes with the Fano mode, while the antisymmetric mode remains decoupled. Using quantum Langevin equations together with a transfer-matrix description of the optical scattering problem, we show that the Fano-induced hybridization can generate narrow optical normal modes that remain efficiently accessible to the external drive for experimentally realistic parameters. These modes can provide effective sideband resolution and enable ground-state cooling of the membrane motion even when the bare cavity is in the unresolved-sideband regime. Our results establish Fano MIM systems as a promising platform for spectral and optomechanical engineering.

physics.optics↗

arXiv2026

Nonlinear quantum optomechanics in a Fano-mirror microcavity system

We study a Fano-mirror optomechanical system in the quantum nonlinear regime. In this system, two strongly lossy optical modes hybridize through both coherent and dissipative couplings to form an effective optical mode with a drastically reduced linewidth. This linewidth reduction enables the system to access the single-photon strong-coupling and sideband-resolved regimes simultaneously. We formulate the system dynamics using an effective master-equation approach and benchmark it against quantum Langevin and dressed-state master-equation descriptions. With experimentally realistic parameters, we predict clear quantum signatures, including photon blockade and the generation of mechanical cat states. Our work establishes the Fano-mirror architecture as a promising platform for harnessing single-photon optomechanical nonlinearities for quantum state engineering under achievable experimental conditions.

quant-ph↗

arXiv2025

Precision of an autonomous demon exploiting nonthermal resources and information

Quantum-dot systems serve as nanoscale heat engines exploiting thermal fluctuations to perform a useful task. Here, we investigate a multi-terminal triple-dot system, operating as a refrigerator that extracts heat from a cold electronic contact. In contrast to standard heat engines, this system exploits a nonthermal resource. This has the intriguing consequence that cooling can occur without extracting energy from the resource on average -- a seemingly demonic action -- while, however, requiring the resource to fluctuate. Using full counting statistics and stochastic trajectories, we analyze the performance of the device in terms of the cooling-power precision, employing performance quantifiers motivated by the thermodynamic and kinetic uncertainty relations. We focus on two regimes with large output power, which are based on two operational principles: exploiting information on one hand and the nonthermal properties of the resource on the other. We show that these regimes significantly differ in precision. In particular, the regime exploiting the nonthermal properties of the resource can have cooling-power fluctuations that are suppressed with respect to the input fluctuations by an order of magnitude. We also substantiate the interpretation of the two different working principles by analyzing cross-correlations between input and output heat currents and information flow.

cond-mat.mes-hall↗

arXiv2025

Sources of nonlinearity in the response of a driven nano-electromechanical resonator

Nanoelectromechanical resonators provide an ideal platform for investigating the interplay between electron transport and nonlinear mechanical motion. Externally driven suspended carbon nanotubes, containing an electrostatically defined quantum dot are especially promising. These devices possess two main sources of nonlinearity: the electromechanical coupling and the intrinsic contributions of the resonator that induce a Duffing-like nonlinear behavior. In this work, we observe the interplay between the two sources across different driving regimes. The main nonlinear feature we observe is the emergence of arch-like resonances in the electronic transport when the resonator is strongly driven. We show that our model is in good agreement with our experimental electron transport measurements on a suspended carbon nanotube. This characterization paves the way for the exploration of nonlinear phenomena using mesoscopic electromechanical resonators.

cond-mat.mes-hall↗

arXiv2024

Role of electron-electron interaction in the Mpemba effect in quantum dots

The Mpemba effect has initially been noticed in macroscopic systems -- namely that hot water can freeze faster than cold water -- but recently its extension to open quantum systems has attracted significant attention. This phenomenon can be explained in the context of nonequilibrium thermodynamics of Markovian systems, relying on the amplitudes of different decay modes of the system dynamics. Here, we study the Mpemba effect in a single-level quantum dot coupled to a thermal bath, highlighting the role of the sign and magnitude of the electron-electron interaction in the occurrence of the Mpemba effect. We gain physical insights into the decay modes from a dissipative symmetry of this system called fermionic duality. Based on this analysis of the relaxation to equilibrium of the dot, we derive criteria for the occurrence of the Mpemba effect using two thermodynamically relevant measures of the distance to equilibrium, the nonequilibrium free energy and the dot energy. We furthermore compare this effect to a possible exponential speedup of the relaxation. Finally, we propose experimentally relevant schemes for the state preparation and explore different ways of observing the Mpemba effect in quantum dots in experiments.

cond-mat.mes-hall↗

arXiv2024

Extra cost of erasure due to quantum lifetime broadening

The energy cost of erasing a bit of information was fundamentally lower bounded by Landauer, in terms of the temperature of its environment: $W\geq k_\mathrm{B} T \ln 2$. However, in real electronic devices, the information-bearing system is usually in contact with two or more electrodes, with different temperatures and chemical potentials. It is not clear what sets the cost of erasure in such nonequilibrium situations. One promising technology for testing the thermodynamic limits of information processing is quantum dots, in which a bit is encoded in the presence or absence of a single electron. We here develop a thermodynamic description of devices of this type and find that, in addition to the electrode temperatures, the potential difference across the quantum dot and lifetime broadening of its energy level contribute to the minimum work cost of erasure. In practical contexts, these contributions may significantly outweigh the cost due to temperature alone.

quant-ph↗

arXiv2024

Autonomous demon exploiting heat and information at the trajectory level

We propose an electronic bipartite system consisting of a working substance, in which a refrigeration process is implemented, and of a nonthermal resource region, containing a combination of different thermal baths. In the working substance, heat is extracted from the coldest of two electronic reservoirs (refrigeration) via heat- and particle transport through a quantum dot. This quantum dot of the working substance is capacitively coupled to the resource region. In such a setup, a finite cooling power can be obtained in the working substance, while the energy exchange with the resource region exactly cancels out on average. At the same time, information is always exchanged, even on average, due to the capacitive coupling between the two parts of the bipartite system. The proposed system therefore implements an autonomous demon with fully vanishing heat extraction from the resource. Unlike macroscopic machines, nanoscale machines exhibit large fluctuations in performance, so precision becomes an important performance quantifier. We give a comprehensive description of the thermodynamic performance of the proposed autonomous demon in terms of stochastic trajectories and of full counting statistics and demonstrate that the precision of the cooling power strongly depends on the operation principle of the device. More specifically, the interplay of information flow and counter-balancing heat flows dramatically impacts the trade-off between cooling power, efficiency, and precision. We expect this insight to be of relevance for guiding the design of energy-conversion processes exploiting nonthermal resources.

cond-mat.mes-hall↗

arXiv2024

Coherent feedback control for cavity optomechanical systems with a frequency-dependent mirror

Ground-state cooling of mechanical resonators is a prerequisite for the observation of various quantum effects in optomechanical systems and thus has always been a crucial task in quantum optomechanics. In this paper, we study how to realize ground-state cooling of the mechanical mode in a Fano-mirror optomechanical setup, which allows for enhanced effective optomechanical interaction but typically works in the (deeply) unresolved-sideband regime. We reveal that for such a two-sided cavity geometry with very different decay rates at the two cavity mirrors, it is possible to cool the mechanical mode down to its ground state within a broad range of parameters by using an appropriate single-sided coherent feedback. This is possible even if the total optical loss is more than seven orders of magnitude larger than the mechanical frequency and the feedback efficiency is relatively low. Importantly, we show that a more standard double-sided feedback scheme is not appropriate to cooperate with a Fano-mirror system.

quant-ph↗

arXiv2024

Coupling a single spin to high-frequency motion

Coupling a single spin to high-frequency mechanical motion is a fundamental bottleneck of applications such as quantum sensing, intermediate and long-distance spin-spin coupling, and classical and quantum information processing. Previous experiments have only shown single spin coupling to low-frequency mechanical resonators, such as diamond cantilevers. High-frequency mechanical resonators, having the ability to access the quantum regime, open a range of possibilities when coupled to single spins, including readout and storage of quantum states. Here we report the first experimental demonstration of spin-mechanical coupling to a high-frequency resonator. We achieve this all-electrically on a fully suspended carbon nanotube device. A new mechanism gives rise to this coupling, which stems from spin-orbit coupling, and it is not mediated by strain. We observe both resonant and off-resonant coupling as a shift and broadening of the electric dipole spin resonance (EDSR), respectively. We develop a complete theoretical model taking into account the tensor form of the coupling and non-linearity in the motion. Our results propel spin-mechanical platforms to an uncharted regime. The interaction we reveal provides the full toolbox for promising applications ranging from the demonstration of macroscopic superpositions, to the operation of fully quantum engines, to quantum simulators.

cond-mat.mes-hall↗

arXiv2023

Dissipative and dispersive cavity optomechanics with a frequency-dependent mirror

An optomechanical microcavity can considerably enhance the interaction between light and mechanical motion by confining light to a sub-wavelength volume. However, this comes at the cost of an increased optical loss rate. Therefore, microcavity-based optomechanical systems are placed in the unresolved-sideband regime, preventing sideband-based ground-state cooling. A pathway to reduce optical loss in such systems is to engineer the cavity mirrors, i.e., the optical modes that interact with the mechanical resonator. In our work, we analyze such an optomechanical system, whereby one of the mirrors is strongly frequency-dependent, i.e., a suspended Fano mirror. This optomechanical system consists of two optical modes that couple to the motion of the suspended Fano mirror. We formulate a quantum-coupled-mode description that includes both the standard dispersive optomechanical coupling as well as dissipative coupling. We solve the Langevin equations of the system dynamics in the linear regime showing that ground-state cooling from room temperature can be achieved even if the cavity is per se not in the resolved-sideband regime, but achieves effective sideband resolution through strong optical mode coupling. Importantly, we find that the cavity output spectrum needs to be properly analyzed with respect to the effective laser detuning to infer the phonon occupation of the mechanical resonator. Our work also predicts how to reach the regime of nonlinear quantum optomechanics in a Fano-based microcavity by engineering the properties of the Fano mirror.

physics.optics↗

arXiv2023

Integrated microcavity optomechanics with a suspended photonic crystal mirror above a distributed Bragg reflector

Increasing the interaction between light and mechanical resonators is an ongoing endeavor in the field of cavity optomechanics. Optical microcavities allow for boosting the interaction strength through their strong spatial confinement of the optical field. In this work, we follow this approach by realizing a sub-wavelength-long, free-space optomechanical microcavity on-chip fabricated from an (Al,Ga)As heterostructure. A suspended GaAs photonic crystal mirror is acting as a highly reflective mechanical resonator, which together with a distributed Bragg reflector forms an optomechanical microcavity. We demonstrate precise control over the microcavity resonance by change of the photonic crystal parameters. The interplay between the microcavity mode and a guided resonance of the photonic crystal modifies the cavity response and results in a stronger dynamical backaction on the mechanical resonator compared to conventional optomechanical dynamics.

physics.optics↗

arXiv2023

Charge, spin, and heat shot noises in the absence of average currents: Conditions on bounds at zero and finite frequencies

Nonequilibrium situations where selected currents are suppressed are of interest in fields like thermoelectrics and spintronics, raising the question of how the related noises behave. We study such zero-current charge, spin, and heat noises in a two-terminal mesoscopic conductor. In the presence of voltage, spin and temperature biases, the nonequilibrium (shot) noises of charge, spin, and heat can be arbitrarily large, even if their average currents vanish. However, as soon as a temperature bias is present, additional equilibrium (thermal-like) noise necessarily occurs. We show that this equilibrium noise sets an upper bound on the zero-current charge and spin shot noises, even if additional voltage or spin biases are present. We demonstrate that these bounds can be overcome for heat transport by breaking the spin and electron-hole symmetries, respectively. By contrast, we show that the bound on the charge noise for strictly two-terminal conductors even extends into the finite-frequency regime.

cond-mat.mes-hall↗

arXiv2023

Non-geometric pumping effects on the performance of interacting quantum-dot heat engines

Periodically driven quantum dots can act as counterparts of cyclic thermal machines at the nanoscale. In the slow-driving regime of geometric pumping, such machines have been shown to operate in analogy to a Carnot cycle. For larger driving frequencies, which are required in order to increase the cooling power, the efficiency of the operation decreases. Up to which frequency a close-to-optimal performance is still possible depends on the magnitude and sign of on-site electron-electron interaction. Extending our previous detailed study on cyclic quantum-dot refrigerators [Phys. Rev. B 106, 035405 (2022)], we here find that the optimal cooling power remains constant up to weak interaction strength compared to the cold-bath temperature. By contrast, the work cost depends on the interaction via the dot's charge relaxation rate, as the latter sets the typical driving frequency for the onset of non-geometric pumping contributions.

cond-mat.mes-hall↗

arXiv2022

Stability of long-sustained oscillations induced by electron tunneling

Self-oscillations are the result of an efficient mechanism generating periodic motion from a constant power source. In quantum devices, these oscillations may arise due to the interaction between single electron dynamics and mechanical motion. We show that, due to the complexity of this mechanism, these self-oscillations may irrupt, vanish, or exhibit a bistable behaviour causing hysteresis cycles. We observe these hysteresis cycles and characterize the stability of different regimes in both single and double quantum dot configurations. In particular cases, we find these oscillations stable for over 20 seconds, many orders of magnitude above electronic and mechanical characteristic timescales, revealing the robustness of the mechanism at play.

cond-mat.mes-hall↗

arXiv2022

Ultrastrong coupling between electron tunneling and mechanical motion

The ultrastrong coupling of single-electron tunneling and nanomechanical motion opens exciting opportunities to explore fundamental questions and develop new platforms for quantum technologies. We have measured and modeled this electromechanical coupling in a fully-suspended carbon nanotube device and report a ratio of $g_\mathrm{m}/ω_\mathrm{m} = 2.72 \pm 0.14$, where $g_\mathrm{m}/2π= 0.80\pm 0.04$ GHz is the coupling strength and $ω_\mathrm{m}/2π=294.5$ MHz is the mechanical resonance frequency. This is well within the ultrastrong coupling regime and the highest among all other electromechanical platforms. We show that, although this regime was present in similar fully-suspended carbon nanotube devices, it went unnoticed. Even higher ratios could be achieved with improvement on device design.

cond-mat.mes-hall↗

arXiv2022

Geometric energy transport and refrigeration with driven quantum dots

We study geometric energy transport in a slowly driven single-level quantum dot weakly coupled to electronic contacts and with strong onsite interaction, which can be either repulsive or attractive. Exploiting a recently discovered fermionic duality for the evolution operator of the master equation, we provide compact and insightful analytic expressions of energy pumping curvatures for any pair of driving parameters. This enables us to systematically identify and explain the pumping mechanisms for different driving schemes, thereby also comparing energy and charge pumping. We determine the concrete impact of many-body interactions and show how particle-hole symmetry and fermionic duality manifest, both individually and in combination, as system-parameter symmetries of the energy pumping curvatures. Building on this transport analysis, we study the driven dot acting as a heat pump or refrigerator, where we find that the sign of the onsite interaction plays a crucial role in the performance of these thermal machines.

cond-mat.mes-hall↗

arXiv2021

Optomechanical cooling with coherent and squeezed light: the thermodynamic cost of opening the heat valve

Ground-state cooling of mechanical motion by coupling to a driven optical cavity has been demonstrated in various optomechanical systems. In our work, we provide a so far missing thermodynamic performance analysis of optomechanical sideband cooling in terms of a heat valve. As performance quantifiers, we examine not only the lowest reachable effective temperature (phonon number) but also the evacuated-heat flow as an equivalent to the cooling power of a standard refrigerator, as well as appropriate thermodynamic efficiencies, which all can be experimentally inferred from measurements of the cavity output light field. Importantly, in addition to the standard optomechanical setup fed by coherent light, we investigate two recent alternative setups for achieving ground-state cooling: replacing the coherent laser drive by squeezed light or using a cavity with a frequency-dependent (Fano) mirror. We study the dynamics of these setups within and beyond the weak-coupling limit and give concrete examples based on parameters of existing experimental systems. By applying our thermodynamic framework, we gain detailed insights into these three different optomechanical cooling setups, allowing a comprehensive understanding of the thermodynamic mechanisms at play.

quant-ph↗

arXiv2020

The energetic cost of work extraction

We analyze work extraction from a qubit into a wave guide (WG) acting as a battery, where work is the coherent component of the energy radiated by the qubit. The process is stimulated by a wave packet whose mean photon number (the battery's charge) can be adjusted. We show that the extracted work is bounded by the qubit's ergotropy, and that the bound is saturated for a large enough battery's charge. If this charge is small, work can still be extracted. Its amount is controlled by the quantum coherence initially injected in the qubit's state, that appears as a key parameter when energetic resources are limited. This new and autonomous scenario for the study of quantum batteries can be implemented with state-of-the-art artificial qubits coupled to WGs.

quant-ph↗