Searcharxiv⌕ Search

arXiv subjects

Julio C. Ugucioni

Publications and source records attributed to Julio C. Ugucioni.

3 recordsLinked to original sources

Chlorophyll-a Fluorescence-Based Optical Temperature Sensor Using Food-Grade Chlorella Extract

This letter reports the development of an optical temperature sensor based on the fluorescence of an extract obtained from \textit{Chlorella}, a unicellular microalga commercially available as food-grade biomass. Using a straightforward ethanolic extraction route, the sensing platform exploits the characteristic emission of chlorophyll-\textit{a} as the optical transducing parameter. The operating principle relies on thermal fluorescence quenching, which promotes a decrease in emission intensity with rising temperature. In the temperature range from $28.6$ to $43.0~^{\circ}\text{C}$, the sensor exhibited a linear response ($R^2 = 0.9963$) with a sensitivity of $(-8.9 \pm 0.2) \times 10^{-3}~^{\circ}\text{C}^{-1}$. Dynamic testing over consecutive heating--cooling cycles confirmed the sensor operation under sub-degree thermal oscillations and enabled the characterization of the system's photobleaching drift ($3.65\%\cdot\text{h}^{-1}$). The results reported herein demonstrate the feasibility of exploiting sustainable, bio-derived microalgal pigments as functional photoactive materials for optical thermometry.

physics.optics↗

Rotation angle sensing via polarization-dependent mode superposition in a hollow-core fiber with two-fold symmetry

Hollow-core photonic crystal fibers (HCPCF) have experienced tremendous advancements recently, leading to remarkable demonstrations of transmission loss reduction and deeper understanding of their guidance fundamentals. Indeed, this progress has entailed investigations into various HCPCF designs, allowing for attaining diverse properties of interest such as ultralow loss, polarization filtering, and specific modal operation. Among HCPCFs with tailored modal characteristics are fibers displaying microstructures with modified symmetry, which allow for changing the loss hierarchy between the guided modes, hence favoring the propagation of higher-order modes. In this context, we here demonstrate the realization of an angle sensor utilizing a tubular HCPCF with a two-fold symmetric cladding. This specific fiber design enables the generation of an output intensity profile resulting from the superposition of LP01 and LP11-like modes, whose excitation and resulting output intensity spatial distribution are dependent on the polarization angle of the incident light. Thus, by rotating the input beam's polarization and analyzing the evolution of the resulting output profile, we characterized a rotation angle sensor exhibiting a sensitivity of 25 counts/degree and an estimated resolution of 0.3°. We understand that this work broadens the framework of HCPCF applications, demonstrating that symmetry-modified hollow-core fibers can act as a promising platform for advanced sensing scenarios and polarimetric characterizations.

physics.optics↗

In-series Multimode Interference Sensors and Fabry-Perot Interferometers for Enhanced Wavelength Shift Resolving Capabilities

We report on the development of a refractive index sensor obtained by using a singlemode-multimode-singlemode (SMS) structure and a Fabry-Perot interferometer (FPI) set into an in-series configuration. Due to the self-imaging phenomenon, the SMS structure - formed by splicing a no-core fiber between two singlemode fibers -, provides a broad spectral peak whose central wavelength position is sensitive to variations in the refractive index of the medium surrounding the fiber. In turn, thanks to the in-series SMS-FPI configuration, the sensor's reflection spectrum exhibits the SMS spectral signature modulated by FPI fringes. This readily allows for reducing the width of the spectral features monitored during the sensing measurements, thus enhancing the capabilities of adequately resolving the corresponding spectral shifts. The FPIs reported in this investigation have been fabricated by using two different methods, namely by forming an air-gap FPI between the cleaved ends of two singlemode optical fibers, and by casting a polymeric film onto a connectorized fiber end tip. In the first configuration, the distance between the two cleaved fiber ends could be varied to tune the FPI's free spectral range, hence allowing for tailoring the widths of the spectral oscillations to be monitored during the sensing measurements. Alternatively, the second configuration, while avoiding the use of motorized translation stages, provides a more versatile option for applications. Thus, we understand that our work expands the application of multimode interference and FPIs in sensing scenarios, providing new opportunities for probing physical and chemical parameters by exploring their combined response.

physics.optics↗