arXiv subjects

Julius Ratzenberger

Publications and source records attributed to Julius Ratzenberger.

5 recordsLinked to original sources

arXiv2026

The domain-wall/metal-electrode injection barrier in lithium niobate: Which electrical transport model fits best?

The comprehensive description of both the electrical transport along conductive domain walls (CDWs) in lithium niobate (LNO) single crystals and the charge injection at the interfacing metal electrodes, emerged to be a complex challenge. Recently, a heuristic evaluation allowed to postulate the "R2D2" equivalent-circuit model (consisting of two parallel resistor-diode pairs) to appropriately match the DC current-voltage (I-V) characteristics. Here, we carefully revisit the interfacial electrical behavior, i.e., the diode part of the equivalent circuit model, since many more processes beyond the diode-related electron hopping transport (HT) assumed so far, may concurrently occur, such as thermionic emission (TE), Fowler-Nordheim tunneling (FNT), space-charge limited conduction (SCLC), and others more. The "R2D2" model thus needs to be generalized into an "R2X2" circuit model (with X = HT, TE, FNT, and others) to fit to the experimental data. Moreover, to double check for the best I-V curve fitting to the different theories, we apply a higher-harmonic DW current-contribution (HHCC) analysis, i.e., an AC I-V inspection, that allows us to discriminate between all these possible models with much higher precision than from pure DC I-V curve fitting. Both the AC and DC analysis reveal well consistent results, finally finding that the FNT model accounts best for the domain-wall/electrode junctions investigated here.

cond-mat.mtrl-sci↗

arXiv2025

Demonstration of domain wall current in MgO-doped lithium niobate single crystals up to 400 {\deg}C

Conductive ferroelectric domain walls (DWs) represent a promising topical system for the development of nanoelectronic components and device sensors to be operational at elevated temperatures. DWs show very different properties as compared to their hosting bulk crystal, in particular with respect to the high local electrical conductivity. The objective of this work is to demonstrate DW conductivity up to temperatures as high as \SI{400}{\degreeCelsius} which extends previous studies significantly. Experimental investigation of the DW conductivity of charged, inclined DWs is performed using \SI{5}{\mole\percent} MgO-doped lithium niobate single crystals. \CR{Current-voltage (\IV) curves are determined by DC electrometer measurements and impedance spectroscopy and found to be identical. Moreover, impedance spectroscopy enables to recognize artifacts such as damaged electrodes. Temperature dependent measurements} over repeated heating cycles reveal two distinct thermal activation energies for a given DW, with the higher of the activation energies only measured at higher temperatures. Depending on the specific sample, the higher activation energy is found above \SI{160}{\degreeCelsius}~to~\SI{230}{\degreeCelsius}. This suggests, in turn, that more than one type of defect/polaron is involved, and that the dominant transport mechanism changes with increasing temperature. First principles atomistic modelling suggests that the conductivity of inclined domain walls cannot be solely explained by the formation of a 2D carrier gas and must be supported by hopping processes. This holds true even at temperatures as high as \SI{400}{\degreeCelsius}. Our investigations underline the potential to extend \DWC based nanoelectronic and sensor applications even into the so-far unexplored temperature range up to \SI{400}{\degreeCelsius}.

physics.app-ph↗

arXiv2024

Towards the reproducible fabrication of conductive ferroelectric domain walls into lithium niobate bulk single crystals

Ferroelectric domain walls (DWs) are promising structures for assembling future nano-electronic circuit elements on a larger scale, since reporting domain wall currents of up to 1 mA per single DW. One key requirement hereto is their reproducible manufacturing by gaining preparative control over domain size and domain wall conductivity (DWC). To date, most works on DWC have focused on exploring the fundamental electrical properties of individual DWs within single shot experiments, with emphasis on quantifying the origins for DWC. Very few reports exist when it comes to compare the DWC properties between two separate DWs, and literally nothing exists where issues of reproducibility in DWC devices have been addressed. To fill this gap while facing the challenge of finding guidelines achieving predictable DWC performance, we report on a procedure that allows us to reproducibly prepare single hexagonal domains of a predefined diameter into uniaxial ferroelectric (FE) lithium niobate (LN) single crystals of 200 and 300 micrometers thickness, respectively. We show that the domain diameter can be controlled with an error of a few percent. As-grown DWs are then subjected to a standard procedure of current-controlled high-voltage DWC enhancement, repetitively reaching a DWC increase of 6 orders of magnitude. While all resulting DWs show significantly enhanced DWC values, subtle features in their individual current-voltage (I-V) characteristics hint towards different 3D shapes into the bulk, with variations probably reflecting local heterogeneities by defects, DW pinning, and surface-near DW inclination, which seem to have a larger impact than expected.

cond-mat.mtrl-sci↗

arXiv2024

High-temperature domain wall current in Mg-doped lithium niobate single crystals up to 400°C

Conductive ferroelectric domain walls (DWs) represent a promising topical system for the development of nanoelectronic components and devices. DWs show very different properties as compared to their bulk counterparts. Of central interest here is the domain wall current (DWC) of charged DWs in 5mol\% Mg-doped lithium niobate single crystals; in contrast to former works, we extend the DWC study here to temperatures as high as 400$^\circ$C. Both the temporal stability and the thermal activation energies of 90 - 160 meV are readily deduced from current-voltage sweeps as recorded over multiple heating cycles. Our experimental work is backed up by atomistic modelling of the DWC. The latter suggests that a large band bending renders head-to-head and tail-to-tail DWs semimetallic. These detailed investigations underline the potential to extend DWC-based nanoelectronic applications even into the so-far unexplored high-temperature regime.

cond-mat.mtrl-sci↗

arXiv2022

Tuning the domain wall conductivity in bulk lithium niobate by uniaxial stress

Conductive domain walls (CDWs) in insulating ferroelectrics have recently attracted considerable attention due to their unique topological, optical, and electronic properties, and offer potential applications such as in memory devices or re-writable circuitry. The electronic properties of domain walls (DWs) can be tuned by the application of strain, hence controlling the charge carrier density at DWs. In this work, we study the influence of uniaxial stress on the conductivity of DWs in the bulk single crystal lithium niobate (LiNbO$_3$). Using conductive atomic force microscopy (cAFM), we observe a large asymmetry in the conductivity of DWs, where only negatively screened walls, so called head-to-head DWs, are becoming increasingly conductive, while positively screened, tail-to-tails DWs, show a decrease in conductivity. This asymmetry of DW conductivity agrees with our theoretical model based on the piezoelectric effect. In addition, we observed that the current in the DW increases up to an order of magnitude for smaller compressive stresses of 100 MPa. This response of DWs remained intact for multiple stress cycles over 2 months, opening a path for future applications.

cond-mat.mtrl-sci↗