Searcharxiv⌕ Search

arXiv subjects

Jun Li

Publications and source records attributed to Jun Li.

At least 487 records · Page 27Linked to original sources
arXiv2023

Path Planning for Air-Ground Robot Considering Modal Switching Point Optimization

An innovative sort of mobility platform that can both drive and fly is the air-ground robot. The need for an agile flight cannot be satisfied by traditional path planning techniques for air-ground robots. Prior studies had mostly focused on improving the energy efficiency of paths, seldom taking the seeking speed and optimizing take-off and landing places into account. A robot for the field application environment was proposed, and a lightweight global spatial planning technique for the robot based on the graph-search algorithm taking mode switching point optimization into account, with an emphasis on energy efficiency, searching speed, and the viability of real deployment. The fundamental concept is to lower the computational burden by employing an interchangeable search approach that combines planar and spatial search. Furthermore, to safeguard the health of the power battery and the integrity of the mission execution, a trap escape approach was also provided. Simulations are run to test the effectiveness of the suggested model based on the field DEM map. The simulation results show that our technology is capable of producing finished, plausible 3D paths with a high degree of believability. Additionally, the mode-switching point optimization method efficiently identifies additional acceptable places for mode switching, and the improved paths use less time and energy.

cs.RO↗
arXiv2023

Human Machine Co-adaption Interface via Cooperation Markov Decision Process System

This paper aims to develop a new human-machine interface to improve rehabilitation performance from the perspective of both the user (patient) and the machine (robot) by introducing the co-adaption techniques via model-based reinforcement learning. Previous studies focus more on robot assistance, i.e., to improve the control strategy so as to fulfill the objective of Assist-As-Needed. In this study, we treat the full process of robot-assisted rehabilitation as a co-adaptive or mutual learning process and emphasize the adaptation of the user to the machine. To this end, we proposed a Co-adaptive MDPs (CaMDPs) model to quantify the learning rates based on cooperative multi-agent reinforcement learning (MARL) in the high abstraction layer of the systems. We proposed several approaches to cooperatively adjust the Policy Improvement among the two agents in the framework of Policy Iteration. Based on the proposed co-adaptive MDPs, the simulation study indicates the non-stationary problem can be mitigated using various proposed Policy Improvement approaches.

cs.AI↗
arXiv2023

Efficient Federated Learning with Enhanced Privacy via Lottery Ticket Pruning in Edge Computing

Federated learning (FL) is a collaborative learning paradigm for decentralized private data from mobile terminals (MTs). However, it suffers from issues in terms of communication, resource of MTs, and privacy. Existing privacy-preserving FL methods usually adopt the instance-level differential privacy (DP), which provides a rigorous privacy guarantee but with several bottlenecks: severe performance degradation, transmission overhead, and resource constraints of edge devices such as MTs. To overcome these drawbacks, we propose Fed-LTP, an efficient and privacy-enhanced FL framework with \underline{\textbf{L}}ottery \underline{\textbf{T}}icket \underline{\textbf{H}}ypothesis (LTH) and zero-concentrated D\underline{\textbf{P}} (zCDP). It generates a pruned global model on the server side and conducts sparse-to-sparse training from scratch with zCDP on the client side. On the server side, two pruning schemes are proposed: (i) the weight-based pruning (LTH) determines the pruned global model structure; (ii) the iterative pruning further shrinks the size of the pruned model's parameters. Meanwhile, the performance of Fed-LTP is also boosted via model validation based on the Laplace mechanism. On the client side, we use sparse-to-sparse training to solve the resource-constraints issue and provide tighter privacy analysis to reduce the privacy budget. We evaluate the effectiveness of Fed-LTP on several real-world datasets in both independent and identically distributed (IID) and non-IID settings. The results clearly confirm the superiority of Fed-LTP over state-of-the-art (SOTA) methods in communication, computation, and memory efficiencies while realizing a better utility-privacy trade-off.

cs.DC↗
arXiv2023

Verwey transition as evolution from electronic nematicity to trimerons via electron-phonon coupling

Understanding the driving mechanisms behind metal-insulator transitions (MITs) is a critical step towards controlling material's properties. Since the proposal of charge-order-induced MIT in magnetite Fe3O4 in 1939 by Verwey, the nature of the charge order and its role in the transition have remained elusive-a longstanding challenge in the studies of complex oxides. Recently, a trimeron order was discovered in the low-temperature monoclinic structure of Fe3O4; however, the expected transition entropy change in forming trimeron at the Verwey transition is greater than the observed value, which arises a reexamination of the ground state in the high-temperature phase. Here we use electron diffraction to unveil that a nematic charge order on particular Fe sites emerges in the high-temperature cubic structure of bulk Fe3O4, and that upon cooling, a competitive intertwining of charge and lattice orders leads to the emergence of the Verwey transition. Moreover, MeV ultrafast electron diffraction (UED) provides a dynamic measure of the strong coupling between photoexcited electrons and the X3 phonon modes. Our findings discover a new type of electronic nematicity in correlated materials and offer novel insights into the Verwey transition mechanism in Fe3O4 via the electron-phonon coupling.

cond-mat.str-el↗
arXiv2023

A Cooperative Perception System Robust to Localization Errors

Cooperative perception is challenging for safety-critical autonomous driving applications.The errors in the shared position and pose cause an inaccurate relative transform estimation and disrupt the robust mapping of the Ego vehicle. We propose a distributed object-level cooperative perception system called OptiMatch, in which the detected 3D bounding boxes and local state information are shared between the connected vehicles. To correct the noisy relative transform, the local measurements of both connected vehicles (bounding boxes) are utilized, and an optimal transport theory-based algorithm is developed to filter out those objects jointly detected by the vehicles along with their correspondence, constructing an associated co-visible set. A correction transform is estimated from the matched object pairs and further applied to the noisy relative transform, followed by global fusion and dynamic mapping. Experiment results show that robust performance is achieved for different levels of location and heading errors, and the proposed framework outperforms the state-of-the-art benchmark fusion schemes, including early, late, and intermediate fusion, on average precision by a large margin when location and/or heading errors occur.

cs.MA↗
arXiv2023

ScatterFormer: Locally-Invariant Scattering Transformer for Patient-Independent Multispectral Detection of Epileptiform Discharges

Patient-independent detection of epileptic activities based on visual spectral representation of continuous EEG (cEEG) has been widely used for diagnosing epilepsy. However, precise detection remains a considerable challenge due to subtle variabilities across subjects, channels and time points. Thus, capturing fine-grained, discriminative features of EEG patterns, which is associated with high-frequency textural information, is yet to be resolved. In this work, we propose Scattering Transformer (ScatterFormer), an invariant scattering transform-based hierarchical Transformer that specifically pays attention to subtle features. In particular, the disentangled frequency-aware attention (FAA) enables the Transformer to capture clinically informative high-frequency components, offering a novel clinical explainability based on visual encoding of multichannel EEG signals. Evaluations on two distinct tasks of epileptiform detection demonstrate the effectiveness our method. Our proposed model achieves median AUCROC and accuracy of 98.14%, 96.39% in patients with Rolandic epilepsy. On a neonatal seizure detection benchmark, it outperforms the state-of-the-art by 9% in terms of average AUCROC.

eess.SP↗
arXiv2023

Informative Data Selection with Uncertainty for Multi-modal Object Detection

Noise has always been nonnegligible trouble in object detection by creating confusion in model reasoning, thereby reducing the informativeness of the data. It can lead to inaccurate recognition due to the shift in the observed pattern, that requires a robust generalization of the models. To implement a general vision model, we need to develop deep learning models that can adaptively select valid information from multi-modal data. This is mainly based on two reasons. Multi-modal learning can break through the inherent defects of single-modal data, and adaptive information selection can reduce chaos in multi-modal data. To tackle this problem, we propose a universal uncertainty-aware multi-modal fusion model. It adopts a multi-pipeline loosely coupled architecture to combine the features and results from point clouds and images. To quantify the correlation in multi-modal information, we model the uncertainty, as the inverse of data information, in different modalities and embed it in the bounding box generation. In this way, our model reduces the randomness in fusion and generates reliable output. Moreover, we conducted a completed investigation on the KITTI 2D object detection dataset and its derived dirty data. Our fusion model is proven to resist severe noise interference like Gaussian, motion blur, and frost, with only slight degradation. The experiment results demonstrate the benefits of our adaptive fusion. Our analysis on the robustness of multi-modal fusion will provide further insights for future research.

cs.CV↗
arXiv2023

Road Traffic Law Adaptive Decision-making for Self-Driving Vehicles

Self-driving vehicles have their own intelligence to drive on open roads. However, vehicle managers, e.g., government or industrial companies, still need a way to tell these self-driving vehicles what behaviors are encouraged or forbidden. Unlike human drivers, current self-driving vehicles cannot understand the traffic laws, thus rely on the programmers manually writing the corresponding principles into the driving systems. It would be less efficient and hard to adapt some temporary traffic laws, especially when the vehicles use data-driven decision-making algorithms. Besides, current self-driving vehicle systems rarely take traffic law modification into consideration. This work aims to design a road traffic law adaptive decision-making method. The decision-making algorithm is designed based on reinforcement learning, in which the traffic rules are usually implicitly coded in deep neural networks. The main idea is to supply the adaptability to traffic laws of self-driving vehicles by a law-adaptive backup policy. In this work, the natural language-based traffic laws are first translated into a logical expression by the Linear Temporal Logic method. Then, the system will try to monitor in advance whether the self-driving vehicle may break the traffic laws by designing a long-term RL action space. Finally, a sample-based planning method will re-plan the trajectory when the vehicle may break the traffic rules. The method is validated in a Beijing Winter Olympic Lane scenario and an overtaking case, built in CARLA simulator. The results show that by adopting this method, the self-driving vehicles can comply with new issued or updated traffic laws effectively. This method helps self-driving vehicles governed by digital traffic laws, which is necessary for the wide adoption of autonomous driving.

cs.RO↗
arXiv2023

Collaborative Multi-BS Power Management for Dense Radio Access Network using Deep Reinforcement Learning

Network energy efficiency is a main pillar in the design and operation of wireless communication systems. In this paper, we investigate a dense radio access network (dense-RAN) capable of radiated power management at the base station (BS). Aiming to improve the long-term network energy efficiency, an optimization problem is formulated by collaboratively managing multi-BSs radiated power levels with constraints on the users traffic volume and achievable rate. Considering stochastic traffic arrivals at the users and time-varying network interference, we first formulate the problem as a Markov decision process (MDP) and then develop a novel deep reinforcement learning (DRL) framework based on the cloud-RAN operation scheme. To tackle the trade-off between complexity and performance, the overall optimization of multi-BSs energy efficiency with the multiplicative complexity constraint is modeled to achieve nearoptimal performance by using a deep Q-network (DQN). In DQN,each BS first maximizes its individual energy efficiency, and then cooperates with other BSs to maximize the overall multiBSs energy efficiency. Simulation results demonstrate that the proposed algorithm can converge faster and enjoy a network energy efficiency improvement by 5% and 10% compared with the benchmarks of the Q-learning and sleep schemes, respectively.

eess.SP↗
arXiv2023

Beamforming and Phase Shift Design for HR-IRS-aided Directional Modulation Network with a Malicious Attacker

In this paper, we propose to use hybrid relay-intelligent reflecting surface (HR-IRS) to improve the security performance of directional modulation (DM) system. In particular, the eavesdropper in this system works in full-duplex (FD) mode and he will eavesdrop on the confidential message (CM) as well as send malicious jamming. We aim to maximize the secrecy rate (SR) by jointly optimizing the receive beamforming, transmit beamforming and phase shift matrix (PSM) of HR-IRS. Since the optimization problem is un-convex and the variables are coupled to each other, we solve this problem by iteratively optimizing these variables. The receive beamforming and transmit beamforming are obtained based on generalized Rayleigh-Ritz theorem and Dinkelbach's Transform respectively. And for PSM, two methods, called separate optimization of PSM (SO-PSM) and joint optimization of PSM (JO-PSM) are proposed. Thus, two iterative algorithms are proposed accordingly, namely maximizing SR based on SO-PSM (Max-SR-SOP) and maximizing SR based on JO-PSM (Max-SR-JOP). The former has better performance and the latter has lower complexity. The simulation results show that when HR-IRS has sufficient power budget, the proposed Max-SR-SOP and Max-SR-JOP can enable HR-IRS-aided DM network to obtain higher SR than passive IRS-aided DM network.

cs.IT↗
arXiv2023

BEVHeight: A Robust Framework for Vision-based Roadside 3D Object Detection

While most recent autonomous driving system focuses on developing perception methods on ego-vehicle sensors, people tend to overlook an alternative approach to leverage intelligent roadside cameras to extend the perception ability beyond the visual range. We discover that the state-of-the-art vision-centric bird's eye view detection methods have inferior performances on roadside cameras. This is because these methods mainly focus on recovering the depth regarding the camera center, where the depth difference between the car and the ground quickly shrinks while the distance increases. In this paper, we propose a simple yet effective approach, dubbed BEVHeight, to address this issue. In essence, instead of predicting the pixel-wise depth, we regress the height to the ground to achieve a distance-agnostic formulation to ease the optimization process of camera-only perception methods. On popular 3D detection benchmarks of roadside cameras, our method surpasses all previous vision-centric methods by a significant margin. The code is available at {\url{https://github.com/ADLab-AutoDrive/BEVHeight}}.

cs.CV↗
arXiv2023

LogoNet: a fine-grained network for instance-level logo sketch retrieval

Sketch-based image retrieval, which aims to use sketches as queries to retrieve images containing the same query instance, receives increasing attention in recent years. Although dramatic progress has been made in sketch retrieval, few efforts are devoted to logo sketch retrieval which is still hindered by the following challenges: Firstly, logo sketch retrieval is more difficult than typical sketch retrieval problem, since a logo sketch usually contains much less visual contents with only irregular strokes and lines. Secondly, instance-specific sketches demonstrate dramatic appearance variances, making them less identifiable when querying the same logo instance. Thirdly, there exist several sketch retrieval benchmarking datasets nowadays, whereas an instance-level logo sketch dataset is still publicly unavailable. To address the above-mentioned limitations, we make twofold contributions in this study for instance-level logo sketch retrieval. To begin with, we construct an instance-level logo sketch dataset containing 2k logo instances and exceeding 9k sketches. To our knowledge, this is the first publicly available instance-level logo sketch dataset. Next, we develop a fine-grained triple-branch CNN architecture based on hybrid attention mechanism termed LogoNet for accurate logo sketch retrieval. More specifically, we embed the hybrid attention mechanism into the triple-branch architecture for capturing the key query-specific information from the limited visual cues in the logo sketches. Experimental evaluations both on our assembled dataset and public benchmark datasets demonstrate the effectiveness of our proposed network.

cs.CV↗
arXiv2023

SS-CPGAN: Self-Supervised Cut-and-Pasting Generative Adversarial Network for Object Segmentation

This paper proposes a novel self-supervised based Cut-and-Paste GAN to perform foreground object segmentation and generate realistic composite images without manual annotations. We accomplish this goal by a simple yet effective self-supervised approach coupled with the U-Net based discriminator. The proposed method extends the ability of the standard discriminators to learn not only the global data representations via classification (real/fake) but also learn semantic and structural information through pseudo labels created using the self-supervised task. The proposed method empowers the generator to create meaningful masks by forcing it to learn informative per-pixel as well as global image feedback from the discriminator. Our experiments demonstrate that our proposed method significantly outperforms the state-of-the-art methods on the standard benchmark datasets.

cs.CV↗
arXiv2023

Design and Optimization for Transmissive RIS Transceiver Enabled Uplink Communication Systems

In this paper, a novel transmissive reconfigurable intelligent surface (RIS) enabled uplink communication system with orthogonal frequency division multiple access (OFDMA) is investigated. Specifically, a non-conventional receiver architecture equipped with a single receiving horn antenna and a transmissive RIS is first proposed, and a far-near field channel model based on planar waves and spherical waves is also given. Then, in order to maximize the system sum-rate of uplink communications, we formulate a joint optimization problem over subcarrier allocation, power allocation and RIS transmissive coefficient design while taking account of user quality-of-service (QoS) constraint. Due to the coupling of optimization variables, the optimization problem is non-convex, so it is challenging to solve it directly. In order to tackle this problem, the alternating optimization (AO) algorithm is utilized to decouple the optimization variables and divide the problem into two sub-problems to solve. First, the problem of joint subcarrier allocation and power allocation is solved via the Lagrangian dual decomposition method. Then, the RIS transmissive coefficient design scheme can be obtained by applying difference-of-convex (DC) programming, successive convex approximation (SCA) and penalty function methods. Finally, the two sub-problems are iterated alternately until convergence is achieved. Numerical results verify that the proposed algorithm has good convergence performance and can improve sum-rate of the proposed system compared with other benchmark algorithms.

cs.IT↗
arXiv2023

Spontaneous rotational symmetry breaking in KTaO$_3$ heterointerface superconductors

Broken symmetries play a fundamental role in superconductivity and influence many of its properties in a profound way. Understanding these symmetry breaking states is essential to elucidate the various exotic quantum behaviors in non-trivial superconductors. Here, we report an experimental observation of spontaneous rotational symmetry breaking of superconductivity at the heterointerface of amorphous (a)-YAlO$_3$/KTaO$_3$(111) with a superconducting transition temperature of 1.86 K. Both the magnetoresistance and superconducting critical field in an in-plane field manifest striking twofold symmetric oscillations deep inside the superconducting state, whereas the anisotropy vanishes in the normal state, demonstrating that it is an intrinsic property of the superconducting phase. We attribute this behavior to the mixed-parity superconducting state, which is an admixture of \emph{s}-wave and \emph{p}-wave pairing components induced by strong spin-orbit coupling inherent to inversion symmetry breaking at the heterointerface of a-YAlO$_3$/KTaO$_3$. Our work suggests an unconventional nature of the underlying pairing interaction in the KTaO$_3$ heterointerface superconductors, and brings a new broad of perspective on understanding non-trivial superconducting properties at the artificial heterointerfaces.

cond-mat.supr-con↗
arXiv2023

Boundary-to-Solution Mapping for Groundwater Flows in a Toth Basin

In this paper, the authors propose a new approach to solving the groundwater flow equation in the Toth basin of arbitrary top and bottom topographies using deep learning. Instead of using traditional numerical solvers, they use a DeepONet to produce the boundary-to-solution mapping. This mapping takes the geometry of the physical domain along with the boundary conditions as inputs to output the steady state solution of the groundwater flow equation. To implement the DeepONet, the authors approximate the top and bottom boundaries using truncated Fourier series or piecewise linear representations. They present two different implementations of the DeepONet: one where the Toth basin is embedded in a rectangular computational domain, and another where the Toth basin with arbitrary top and bottom boundaries is mapped into a rectangular computational domain via a nonlinear transformation. They implement the DeepONet with respect to the Dirichlet and Robin boundary condition at the top and the Neumann boundary condition at the impervious bottom boundary, respectively. Using this deep-learning enabled tool, the authors investigate the impact of surface topography on the flow pattern by both the top surface and the bottom impervious boundary with arbitrary geometries. They discover that the average slope of the top surface promotes long-distance transport, while the local curvature controls localized circulations. Additionally, they find that the slope of the bottom impervious boundary can seriously impact the long-distance transport of groundwater flows. Overall, this paper presents a new and innovative approach to solving the groundwater flow equation using deep learning, which allows for the investigation of the impact of surface topography on groundwater flow patterns.

physics.geo-ph↗
arXiv2023

Quadrature Spatial Scattering Modulation for mmWave Transmission

In this letter, we investigate a novel quadrature spatial scattering modulation (QSSM) transmission technique based on millimeter wave (mmWave) systems, in which the transmitter generates two orthogonal beams targeting candidate scatterers in the channel to carry the real and imaginary parts of the conventional signal, respectively. Meanwhile, the maximum likelihood (ML) detector is adopted at the receiver to recover the received beams and signals. Based on the ML detector, we derive the closed-form average bit error probability (ABEP) expression of the QSSM scheme. Furthermore, we evaluate the asymptotic ABEP expression of the proposed scheme. Monte Carlo simulations verify the exactness and tightness of the derivation results. It is shown that the ABEP performance of QSSM is better than that of traditional spatial scattering modulation.

cs.IT↗
arXiv2023

Pi-ViMo: Physiology-inspired Robust Vital Sign Monitoring using mmWave Radars

Continuous monitoring of human vital signs using non-contact mmWave radars is attractive due to their ability to penetrate garments and operate under different lighting conditions. Unfortunately, most prior research requires subjects to stay at a fixed distance from radar sensors and to remain still during monitoring. These restrictions limit the applications of radar vital sign monitoring in real life scenarios. In this paper, we address these limitations and present "Pi-ViMo", a non-contact Physiology-inspired Robust Vital Sign Monitoring system, using mmWave radars. We first derive a multi-scattering point model for the human body, and introduce a coherent combining of multiple scatterings to enhance the quality of estimated chest-wall movements. It enables vital sign estimations of subjects at any location in a radar's field of view. We then propose a template matching method to extract human vital signs by adopting physical models of respiration and cardiac activities. The proposed method is capable to separate respiration and heartbeat in the presence of micro-level random body movements (RBM) when a subject is at any location within the field of view of a radar. Experiments in a radar testbed show average respiration rate errors of 6% and heart rate errors of 11.9% for the stationary subjects and average errors of 13.5% for respiration rate and 13.6% for heart rate for subjects under different RBMs.

eess.SP↗