arXiv subjects

Junfeng He

Publications and source records attributed to Junfeng He.

At least 73 records · Page 4Linked to original sources

arXiv2014

Weak Electron-Phonon Coupling and Unusual Electron Scattering of Topological Surface States in Sb(111) by Laser-Based Angle-Resolved Photoemission Spectroscopy

High resolution laser-based angle-resolved photoemission measurements have been carried out on Sb(111) single crystal. Two kinds of Fermi surface sheets are observed that are derived from the topological surface states: one small hexagonal electron-like Fermi pocket around $Γ$ point and the other six elongated lobes of hole-like Fermi pockets around the electron pocket. Clear Rashba-type band splitting due to the strong spin-orbit coupling is observed that is anisotropic in the momentum space. Our super-high-resolution ARPES measurements reveal no obvious kink in the surface band dispersions indicating a weak electron-phonon interaction in the surface states. In particular, the electron scattering rate for these topological surface states is nearly a constant over a large energy window near the Fermi level that is unusual in terms of the conventional picture.

cond-mat.str-el↗

arXiv2014

Evidence of Topological Surface State in Three-Dimensional Dirac Semimetal Cd3As2

The three-dimensional topological semimetals represent a new quantum state of matter. Distinct from the surface state in the topological insulators that exhibits linear dispersion in two-dimensional momentum plane, the three-dimensional semimetals host bulk band dispersions linearly along all directions, forming discrete Dirac cones in three-dimensional momentum space. In addition to the gapless points (Weyl/Dirac nodes) in the bulk, the three-dimensional Weyl/Dirac semimetals are also characterized by "topologically protected" surface state with Fermi arcs on their specific surface. The Weyl/Dirac semimetals have attracted much attention recently they provide a venue not only to explore unique quantum phenomena but also to show potential applications. While Cd3As2 is proposed to be a viable candidate of a Dirac semimetal, more experimental evidence and theoretical investigation are necessary to pin down its nature. In particular, the topological surface state, the hallmark of the three-dimensional semimetal, has not been observed in Cd3As2. Here we report the electronic structure of Cd3As2 investigated by angle-resolved photoemission measurements on the (112) crystal surface and detailed band structure calculations. The measured Fermi surface and band structure show a good agreement with the band structure calculations with two bulk Dirac-like bands approaching the Fermi level and forming Dirac points near the Brillouin zone center. Moreover, the topological surface state with a linear dispersion approaching the Fermi level is identified for the first time. These results provide strong experimental evidence on the nature of topologically non-trivial three-dimensional Dirac cones in Cd3As2.

cond-mat.mtrl-sci↗

arXiv2014

Dichotomy of Electronic Structure and Superconductivity between Single-Layer and Double-Layer FeSe/SrTiO3 Films

The latest discovery of possible high temperature superconductivity in the single-layer FeSe film grown on a SrTiO3 substrate, together with the observation of its unique electronic structure and nodeless superconducting gap, has generated much attention. Initial work also found that, while the single-layer FeSe/SrTiO3 film exhibits a clear signature of superconductivity, the double-layer FeSe/SrTiO3 film shows an insulating behavior. Such a dramatic difference between the single-layer and double-layer FeSe/SrTiO3 films is surprising and the underlying origin remains unclear. Here we report our comparative study between the single-layer and double-layer FeSe/SrTiO3 films by performing a systematic angle-resolved photoemission study on the samples annealed in vacuum. We find that, like the single-layer FeSe/SrTiO3 film, the as-prepared double-layer FeSe/SrTiO3 film is insulating and possibly magnetic, thus establishing a universal existence of the magnetic phase in the FeSe/SrTiO3 films. In particular, the double-layer FeSe/SrTiO3 film shows a quite different doping behavior from the single-layer film in that it is hard to get doped and remains in the insulating state under an extensive annealing condition. The difference originates from the much reduced doping efficiency in the bottom FeSe layer of the double-layer FeSe/SrTiO3 film from the FeSe-SrTiO3 interface. These observations provide key insights in understanding the origin of superconductivity and the doping mechanism in the FeSe/SrTiO3 films. The property disparity between the single-layer and double-layer FeSe/SrTiO3 films may facilitate to fabricate electronic devices by making superconducting and insulating components on the same substrate under the same condition.

cond-mat.supr-con↗

arXiv2014

Electronic Evidence of an Insulator-Superconductor Transition in Single-Layer FeSe/SrTiO3 Films

In high temperature cuprate superconductors, it is now generally agreed that the parent compound is a Mott insulator and superconductivity is realized by doping the antiferromagnetic Mott insulator. In the iron-based superconductors, however, the parent compound is mostly antiferromagnetic metal, raising a debate on whether an appropriate starting point should go with an itinerant picture or a localized picture. It has been proposed theoretically that the parent compound of the iron-based superconductors may be on the verge of a Mott insulator, but so far no clear experimental evidence of doping-induced Mott transition has been available. Here we report an electronic evidence of an insulator-superconductor transition observed in the single-layer FeSe films grown on the SrTiO3 substrate. By taking angle-resolved photoemission measurements on the electronic structure and energy gap, we have identified a clear evolution of an insulator to a superconductor with the increasing doping. This observation represents the first example of an insulator-superconductor transition via doping observed in the iron-based superconductors. It indicates that the parent compound of the iron-based superconductors is in proximity of a Mott insulator and strong electron correlation should be considered in describing the iron-based superconductors.

cond-mat.supr-con↗

arXiv2013

Fermi Surface and Band Structure of (Ca,La)FeAs2 Superconductor from Angle-Resolved Photoemission Spectroscopy

The (Ca,R)FeAs2 (R=La,Pr and etc.) superconductors with a signature of superconductivity transition above 40 K possess a new kind of block layers that consist of zig-zag As chains. In this paper, we report the electronic structure of the new (Ca,La)FeAs2 superconductor investigated by both band structure calculations and high resolution angle-resolved photoemission spectroscopy measurements. Band structure calculations indicate that there are four hole-like bands around the zone center $Γ$(0,0) and two electron-like bands near the zone corner M(pi,pi) in CaFeAs2. In our angle-resolved photoemission measurements on (Ca0.9La0.1})FeAs2, we have observed three hole-like bands around the Gamma point and one electron-like Fermi surface near the M(pi,pi) point. These results provide important information to compare and contrast with the electronic structure of other iron-based compounds in understanding the superconductivity mechanism in the iron-based superconductors.

cond-mat.supr-con↗

arXiv2013

Doping Evolution of Nodal Band Renormalization in Bi2Sr2CuO6+d Superconductor Revealed by Laser-Based Angle-Resolved Photoemission Spectroscopy

High resolution laser-based angle-resolved photoemission measurements have been carried out on Bi2Sr2CuO6+d superconductor covering a wide doping range from heavily underdoped to heavily overdoped samples. Two obvious energy scales are identified in the nodal dispersions: one is the well-known 50-80 meV high energy kink and the other is <10 meV low energy kink. The high energy kink increases monotonously in its energy scale with increasing doping and shows weak temperature dependence, while the low energy kink exhibits a non-monotonic doping dependence with its coupling strength enhanced sharply below Tc. These systematic investigations on the doping and temperature dependence of these two energy scales favor electron-phonon interactions as their origin. They point to the importance in involving the electron-phonon coupling in understanding the physical properties and the superconductivity mechanism of high temperature cuprate superconductors.

cond-mat.supr-con↗

arXiv2013

Tunable Dirac Fermion Dynamics in Topological Insulators

Three-dimensional topological insulators are characterized by insulating bulk state and metallic surface state involving Dirac fermions that behave as massless relativistic particles. These Dirac fermions are responsible for achieving a number of novel and exotic quantum phenomena in the topological insulators and for their potential applications in spintronics and quantum computations. It is thus essential to understand the electron dynamics of the Dirac fermions, i.e., how they interact with other electrons, phonons and disorders. Here we report super-high resolution angle-resolved photoemission studies on the Dirac fermion dynamics in the prototypical Bi2(Te,Se)3 topological insulators. We have directly revealed signatures of the electron-phonon coupling in these topological insulators and found that the electron-disorder interaction is the dominant factor in the scattering process. The Dirac fermion dynamics in Bi2(Te3-xSex) topological insulators can be tuned by varying the composition, x, or by controlling the charge carriers. Our findings provide crucial information in understanding the electron dynamics of the Dirac fermions in topological insulators and in engineering their surface state for fundamental studies and potential applications.

cond-mat.str-el↗

arXiv2012

Coexistence of Two Sharp-Mode Couplings and Their Unusual Momentum Dependence in the Superconducting State of Bi2Sr2CaCu2O8+d Superconductor Revealed by Laser-Based Angle-Resolved Photoemission

Super-high resolution laser-based angle-resolved photoemission measurements have been carried out on Bi2Sr2CaCu2O8+d (Bi2212) superconductors to investigate momentum dependence of electron coupling with collective excitations (modes). Two coexisting energy scales are clearly revealed over a large momentum space for the first time in the superconducting state of an overdoped Bi2212 superconductor. These two energy scales exhibit distinct momentum dependence: one keeps its energy near 78 meV over a large momentum space while the other changes its energy from $\sim$40 meV near the antinodal region to $\sim$70 meV near the nodal region. These observations provide a new picture on momentum evolution of electron-boson coupling in Bi2212 that electrons are coupled with two sharp modes simultaneously over a large momentum space in the superconducting states. Their unusual momentum dependence poses a challenge to our current understanding of electron-mode-coupling and its role for high temperature superconductivity in cuprate superconductors.

cond-mat.supr-con↗

arXiv2012

Phase Diagram and High Temperature Superconductivity at 65 K in Tuning Carrier Concentration of Single-Layer FeSe Films

Superconductivity in the cuprate superconductors and the Fe-based superconductors is realized by doping the parent compound with charge carriers, or by application of high pressure, to suppress the antiferromagnetic state. Such a rich phase diagram is important in understanding superconductivity mechanism and other physics in the Cu- and Fe-based high temperature superconductors. In this paper, we report a phase diagram in the single-layer FeSe films grown on SrTiO3 substrate by an annealing procedure to tune the charge carrier concentration over a wide range. A dramatic change of the band structure and Fermi surface is observed, with two distinct phases identified that are competing during the annealing process. Superconductivity with a record high transition temperature (Tc) at ~65 K is realized by optimizing the annealing process. The wide tunability of the system across different phases, and its high-Tc, make the single-layer FeSe film ideal not only to investigate the superconductivity physics and mechanism, but also to study novel quantum phenomena and for potential applications.

cond-mat.supr-con↗

arXiv2012

On the Difficulty of Nearest Neighbor Search

Fast approximate nearest neighbor (NN) search in large databases is becoming popular. Several powerful learning-based formulations have been proposed recently. However, not much attention has been paid to a more fundamental question: how difficult is (approximate) nearest neighbor search in a given data set? And which data properties affect the difficulty of nearest neighbor search and how? This paper introduces the first concrete measure called Relative Contrast that can be used to evaluate the influence of several crucial data characteristics such as dimensionality, sparsity, and database size simultaneously in arbitrary normed metric spaces. Moreover, we present a theoretical analysis to prove how the difficulty measure (relative contrast) determines/affects the complexity of Local Sensitive Hashing, a popular approximate NN search method. Relative contrast also provides an explanation for a family of heuristic hashing algorithms with good practical performance based on PCA. Finally, we show that most of the previous works in measuring NN search meaningfulness/difficulty can be derived as special asymptotic cases for dense vectors of the proposed measure.

cs.LG↗

arXiv2012

Unusual Fermi Surface Sheet-Dependent Band Splitting in Sr2RuO4 Revealed by High Resolution Angle-Resolved Photoemission

High resolution angle-resolved photoemission measurements have been carried out on Sr2RuO4. We observe clearly two sets of Fermi surface sheets near the (π,0)-(0,π) line which are most likely attributed to the surface and bulk Fermi surface splitting of the βband. This is in strong contrast to the nearly null surface and bulk Fermi surface splitting of the αband although both have identical orbital components. Extensive band structure calculations are performed by considering various scenarios, including structural distortion, spin-orbit coupling and surface ferromagnetism. However, none of them can explain such a qualitative difference of the surface and bulk Fermi surface splitting between the αand βsheets. This unusual behavior points to an unknown order on the surface of Sr2RuO4 that remains to be uncovered. Its revelation will be important for studying and utilizing novel quantum phenomena associated with the surface of Sr2RuO4 as a result of its being a possible p-wave chiral superconductor and a topological superconductor.

cond-mat.supr-con↗

arXiv2012

Electronic Origin of High Temperature Superconductivity in Single-Layer FeSe Superconductor

The latest discovery of high temperature superconductivity signature in single-layer FeSe is significant because it is possible to break the superconducting critical temperature ceiling (maximum Tc~55 K) that has been stagnant since the discovery of Fe-based superconductivity in 2008. It also blows the superconductivity community by surprise because such a high Tc is unexpected in FeSe system with the bulk FeSe exhibiting a Tc at only 8 K at ambient pressure which can be enhanced to 38 K under high pressure. The Tc is still unusually high even considering the newly-discovered intercalated FeSe system A_xFe_{2-y}Se_2 (A=K, Cs, Rb and Tl) with a Tc at 32 K at ambient pressure and possible Tc near 48 K under high pressure. Particularly interesting is that such a high temperature superconductivity occurs in a single-layer FeSe system that is considered as a key building block of the Fe-based superconductors. Understanding the origin of high temperature superconductivity in such a strictly two-dimensional FeSe system is crucial to understanding the superconductivity mechanism in Fe-based superconductors in particular, and providing key insights on how to achieve high temperature superconductivity in general. Here we report distinct electronic structure associated with the single-layer FeSe superconductor. Its Fermi surface topology is different from other Fe-based superconductors; it consists only of electron pockets near the zone corner without indication of any Fermi surface around the zone center. Our observation of large and nearly isotropic superconducting gap in this strictly two-dimensional system rules out existence of node in the superconducting gap. These results have provided an unambiguous case that such a unique electronic structure is favorable for realizing high temperature superconductivity.

cond-mat.supr-con↗

arXiv2011

Silicon Layer Intercalation of Centimeter-Scale, Epitaxially-Grown Monolayer Graphene on Ru(0001)

We develop a strategy for graphene growth on Ru(0001) followed by silicon-layer intercalation that not only weakens the interaction of graphene with the metal substrate but also retains its superlative properties. This G/Si/Ru architecture, produced by silicon-layer intercalation approach (SIA), was characterized by scanning tunneling microscopy/spectroscopy and angle resolved electron photoemission spectroscopy. These experiments show high structural and electronic qualities of this new composite. The SIA allows for an atomic control of the distance between the graphene and the metal substrate that can be used as a top gate. Our results show potential for the next generation of graphene-based materials with tailored properties.

cond-mat.mtrl-sci↗

arXiv2011

Persistence of Topological Order and Formation of Quantum Well States in Topological Insulators Bi2(Se,Te)3 under Ambient Conditions

The topological insulators represent a unique state of matter where the bulk is insulating with an energy gap while the surface is metallic with a Dirac cone protected by the time reversal symmetry. These characteristics provide a venue to explore novel quantum phenomena in fundamental physics and show potential applications in spintronics and quantum computing. One critical issue directly related with the applications as well as the fundamental studies is how the topological surface state will behave under ambient conditions (1 atmosphere air and room temperature). In this paper, we report high resolution angle-resolved photoemission measurements on the surface state of the prototypical topological insulators, Bi2Se3, Bi2Te3 and Bi2(Se0.4Te2.6), upon exposing to ambient conditions. We find that the topological order persists even when the surface is exposed to air at room temperature. However, the surface state is strongly modified after such an exposure. Particularly, we have observed the formation of two-dimensional quantum well states near the surface of the topological insulators after the exposure which depends sensitively on the original composition, x, in Bi2(Se3-xTex). These rich information are crucial in utilizing the surface state and in probing its physical properties under ambient conditions.

cond-mat.mtrl-sci↗

arXiv2011

Growth, Characterization and Fermi Surface of Heavy Fermion CeCoIn5 Superconductor

High quality single crystals of heavy Fermion CeCoIn5 superconductor have been grown by flux method with a typical size of (1~2)mm x (1~2)mm x ~0.1 mm. The single crystals are characterized by structural analysis from X-ray diffraction and Laue diffraction, as well as compositional analysis. Magnetic and electrical measurements on the single crystals show a sharp superconducting transition with a transition temperature at Tc(onset) ~ 2.3 K and a transition width of ~0.15 K. The resistivity of the CeCoIn5 crystal exhibits a hump at ~45 K which is typical of a heavy Fermion system. High resolution angle-resolved photoemission spectroscopy (ARPES) measurements of CeCoIn5 reveal clear Fermi surface sheets that are consistent with the band structure calculations when assuming itinerant Ce 4f electrons at low temperature. This work provides important information on the electronic structure of heavy Fermion CeCoIn5 superconductor. It also lays a foundation for further studies on the physical properties and superconducting mechanism of the heavy Fermion superconductors.

cond-mat.supr-con↗

arXiv2011

Extraction of Electron Self-Energy and Gap Function in the Superconducting State of Bi_2Sr_2CaCu_2O_8 Superconductor via Laser-Based Angle-Resolved Photoemission

Super-high resolution laser-based angle-resolved photoemission measurements have been performed on a high temperature superconductor Bi_2Sr_2CaCu_2O_8. The band back-bending characteristic of the Bogoliubov-like quasiparticle dispersion is clearly revealed at low temperature in the superconducting state. This makes it possible for the first time to experimentally extract the complex electron self-energy and the complex gap function in the superconducting state. The resultant electron self-energy and gap function exhibit features at ~54 meV and ~40 meV, in addition to the superconducting gap-induced structure at lower binding energy and a broad featureless structure at higher binding energy. These information will provide key insight and constraints on the origin of electron pairing in high temperature superconductors.

cond-mat.supr-con↗

arXiv2011

Common Fermi Surface Topology and Nodeless Superconducting Gap in K0.68Fe1.79Se2 and (Tl0.45K0.34)Fe1.84Se2 Superconductors Revealed from Angle-Resolved Photoemission Spectroscopy

We carried out high resolution angle-resolved photoemission measurements on the electronic structure and superconducting gap of K_0.68Fe_1.79Se_2 (T_c=32 K) and (Tl_0.45K_0.34)Fe_1.84Se_2 (T_c=28 K) superconductors. In addition to the electron-like Fermi surface near M(π,π), two electron-like Fermi pockets are revealed around the zone center Γ(0,0) in K0.68Fe1.79Se_2. This observation makes the Fermi surface topology of K_0.68Fe_1.79Se_2 consistent with that of (Tl,Rb)_xFe_{2-y}Se_2 and (Tl,K)_xFe_{2-y}Se_2 compounds. A nearly isotropic superconducting gap (Δ) is observed along the electron-like Fermi pocket near the M point in K_0.68Fe_1.79Se_2 (Δ\sim 9 meV) and (Tl_0.45K_0.34)Fe_1.84Se_2 (Δ\sim 8 meV). The establishment of a universal picture on the Fermi surface topology and superconducting gap in the A_xFe_2-ySe_2 (A=K, Tl, Cs, Rb and etc.) superconductors will provide important information in understanding the superconductivity mechanism of the iron-based superconductors.

cond-mat.supr-con↗

arXiv2011

Distinct Fermi Surface Topology and Nodeless Superconducting Gap in (Tl0.58Rb0.42)Fe1.72Se2 Superconductor

High resolution angle-resolved photoemission measurements have been carried out to study the electronic structure and superconducting gap of the (Tl$_{0.58}$Rb$_{0.42}$)Fe$_{1.72}$Se$_2$ superconductor with a T$_c$=32 K. The Fermi surface topology consists of two electron-like Fermi surface sheets around $Γ$ point which is distinct from that in all other iron-based compounds reported so far. The Fermi surface around the M point shows a nearly isotropic superconducting gap of $\sim$12 meV. The large Fermi surface near the $Γ$ point also shows a nearly isotropic superconducting gap of $\sim$15 meV while no superconducting gap opening is clearly observed for the inner tiny Fermi surface. Our observed new Fermi surface topology and its associated superconducting gap will provide key insights and constraints in understanding superconductivity mechanism in the iron-based superconductors.

cond-mat.supr-con↗