arXiv subjects

Junho Shin

Publications and source records attributed to Junho Shin.

7 recordsLinked to original sources

arXiv2025

Dual-wavelength Fourier Ptychographic Topography

We introduce a dual-wavelength Fourier ptychographic topography (FPT) method that extends the lambda/2 height-range limit of single-wavelength FPT. By reconstructing complex fields at two illumination wavelengths and exploiting their phase difference, the method achieves an effective synthetic wavelength lambda_s and an unambiguous range of lambda_s/2 without reducing lateral resolution. A noise-robust wrapped-number search is used to select per-pixel integer pairs (k1, k2), and a global refinement with circular TV regularization and soft bounds improves stability and preserves height discontinuities. The approach is validated through rigorous scattering-model-based simulations and experiments on structured silicon samples, demonstrating accurate height recovery in regimes where single-wavelength FPT exhibits phase wrapping. We analyze the limits of the FPT forward model and identify aspect ratio (AR) and phase modulation transfer function (ph-MTF) as key predictors of reconstruction fidelity. Simulations and experiments show that increasing AR beyond a practical threshold causes loss of high-frequency phase transfer and destabilizes dual-wavelength unwrapping. Within this AR range, dual-wavelength FPT provides robust, high-resolution topography suitable for semiconductor and industrial metrology.

physics.optics↗

arXiv2024

Shortened LLaMA: Depth Pruning for Large Language Models with Comparison of Retraining Methods

Structured pruning of modern large language models (LLMs) has emerged as a way of decreasing their high computational needs. Width pruning reduces the size of projection weight matrices (e.g., by removing attention heads) while maintaining the number of layers. Depth pruning, in contrast, removes entire layers or blocks, while keeping the size of the remaining weights unchanged. Most current research focuses on either width-only or a blend of width and depth pruning, with little comparative analysis between the two units (width vs. depth) concerning their impact on LLM inference efficiency. In this work, we show that simple depth pruning can effectively compress LLMs while achieving comparable or superior performance to recent width pruning studies. Our pruning method boosts inference speeds, especially under memory-constrained conditions that require limited batch sizes for running LLMs, where width pruning is ineffective. In retraining pruned models for quality recovery, continued pretraining on a large corpus markedly outperforms LoRA-based tuning, particularly at severe pruning ratios. We hope this work can help build compact yet capable LLMs. Code and models can be found at: https://github.com/Nota-NetsPresso/shortened-llm

cs.LG↗

arXiv2018

Highly tunable repetition-rate multiplication of mode-locked lasers using all-fibre harmonic injection locking

Higher repetition-rate optical pulse trains have been desired for various applications such as high-bit-rate optical communication, photonic analogue-to-digital conversion, and multi- photon imaging. Generation of multi GHz and higher repetition-rate optical pulse trains directly from mode-locked oscillators is often challenging. As an alternative, harmonic injection locking can be applied for extra-cavity repetition-rate multiplication (RRM). Here we have investigated the operation conditions and achievable performances of all-fibre, highly tunable harmonic injection locking-based pulse RRM. We show that, with slight tuning of slave laser length, highly tunable RRM is possible from a multiplication factor of 2 to >100. The resulting maximum SMSR is 41 dB when multiplied by a factor of two. We further characterize the noise properties of the multiplied signal in terms of phase noise and relative intensity noise. The resulting absolute rms timing jitter of the multiplied signal is in the range of 20 fs to 60 fs (10 kHz - 1 MHz) for different multiplication factors. With its high tunability, simple and robust all-fibre implementation, and low excess noise, the demonstrated RRM system may find diverse applications in microwave photonics, optical communications, photonic analogue-to-digital conversion, and clock distribution networks.

physics.optics↗

arXiv2014

Sub-20-Attosecond Timing Jitter Mode-Locked Fiber Lasers

We demonstrate 14.3-attosecond timing jitter [integrated from 10 kHz to 94 MHz offset frequency] optical pulse trains from 188-MHz repetition-rate mode-locked Yb-fiber lasers. In order to minimize the timing jitter, we shorten the non-gain fiber length to shorten the pulsewidth and reduce excessive higher-order nonlinearity and nonlinear chirp in the fiber laser. The measured jitter spectrum is limited by the amplified spontaneous emission limited quantum noise in the 100 kHz - 1 MHz offset frequency range, while it was limited by the relative intensity noise-converted jitter in the lower offset frequency range. This intrinsically low timing jitter enables sub-100-attosecond synchronization between the two mode-locked Yb-fiber lasers over the full Nyquist frequency with a modest 10-kHz locking bandwidth. The demonstrated performance is the lowest timing jitter measured from any free-running mode-locked fiber lasers, comparable to the performance of the lowest-jitter Ti:sapphire solid-state lasers.

physics.optics↗

arXiv2013

Frequency comb-based microwave transfer over fiber with $7 \times 10^{-19}$ instability using fiber-loop optical-microwave phase detectors

We demonstrate a remote microwave/radio-frequency (RF) transfer technique based on the stabilization of a fiber link using a fiber-loop optical-microwave phase detector (FLOM-PD). This method compensates for the excess phase fluctuations introduced in fiber transfer by direct phase comparison between the optical pulse train reflected from the remote site and the local microwave/RF signal using the FLOM-PD. This enables sub-fs resolution and long-term stable link stabilization while having wide timing detection range and less demand in fiber dispersion compensation. The demonstrated relative frequency instability between 2.856-GHz RF oscillators separated by a 2.3-km fiber link is $7.6 \times 10^{-18}$ and $6.5 \times 10^{-19}$ at 1000 s and 82500 s averaging time, respectively.

physics.optics↗

arXiv2013

Gigahertz repetition rate, sub-femtosecond timing jitter optical pulse train directly generated from a mode-locked Yb:KYW laser

We show that a 1.13-GHz repetition rate optical pulse train with 0.70 fs high-frequency timing jitter (integration bandwidth of 17.5 kHz - 10 MHz, where the measurement instrument-limited noise floor contributes 0.41 fs in 10 MHz bandwidth) can be directly generated from a free-running, single-mode diode-pumped Yb:KYW laser mode-locked by single-walled carbon nanotube (SWCNT)-coated mirrors. To our knowledge, this is the lowest timing jitter optical pulse train with the GHz repetition rate ever measured. If this pulse train is used for direct sampling of 565-MHz signals (Nyquist frequency of the pulse train), the demonstrated jitter level corresponds to the projected effective-number-of-bit (ENOB) of 17.8, which is much higher than the thermal noise limit of 50-ohm load resistance (~14 bits).

physics.optics↗

arXiv2013

Ultralow Phase Noise Microwave Generation From Mode-Locked Er-Fiber Lasers With Subfemtosecond Integrated Timing Jitter

We demonstrate ultralow phase noise 10-GHz microwave signal generation from a free-running mode-locked Er-fiber laser with -142 and -157 dBc/Hz single-sideband absolute phase noise at 10- and 100-kHz offset frequencies, respectively. The absolute RMS timing jitter is 1.5 fs when integrated from 1-kHz to 5-GHz (Nyquist frequency) offset frequency. In the 10-kHz to 10-MHz integration bandwidth typically used for microwave generators, the RMS integrated jitter is 0.49 fs. The Er-fiber laser is operated in the stretched-pulse regime at close-to-zero dispersion to minimize the phase noise of extracted microwaves. In order to suppress the excess phase noise in the optical-to-electronic conversion process, we synchronize a low-noise voltage-controlled oscillator to the fiber laser using a fiber Sagnac-loop-based optical-microwave phase detector.

physics.optics↗