SearcharxivSearch

arXiv subjects

Junhyun Park

Publications and source records attributed to Junhyun Park.

10 recordsLinked to original sources

GLINT: Sparsely Gated Vision-Language Alignment for Fine-Grained Radiology Representations

Vision-language models (VLMs) for radiology have emerged as a scalable paradigm by leveraging image-report pairs naturally produced in clinical workflows. However, this pairing reveals a mismatch in scale: each finding occupies only a small region of the image, yet supervision is provided only at the global image-report level. This poses a central challenge: prior approaches spread weight densely across all patches rather than concentrating on the sparse subset relevant to a given query. To address this, we present GLINT (Gated Language-Image alignmeNT), a framework that explicitly models this sparse correspondence. On the alignment side, we introduce Sparsely Gated Alignment, a novel architecture in which a sigmoid gate over a separate gate embedding space activates only the patches relevant to each textual query, enforcing explicit sparsity. On the representation side, we add Dense Feature Regularization, which anchors the trainable encoder's intermediate features to a frozen self-supervised learning (SSL) teacher, preserving the fine-grained patch features that the gate relies on. The same recipe applies to both 2D chest X-ray (CXR) and 3D chest computed tomography (CT), built with DINOv3 and V-JEPA 2.1, respectively. GLINT enables zero-shot classification, grounding, and segmentation from free-text queries, and to our knowledge is the first to demonstrate zero-shot segmentation on 3D CT volumes without mask supervision. Notably, the most pronounced gains arise on zero-shot grounding and segmentation, where sparse, query-specific localization is required, consistent with our design intent. In downstream evaluation, GLINT outperforms both SSL encoders and medical VLMs on classification, report generation, and segmentation.

cs.CV

SD-GRPO: Verifiable Segment Decomposition for Long-Form Vision-Language Generation

Group Relative Policy Optimization (GRPO) and its variants, originally developed for Large Language Models (LLMs), have recently been applied to Multimodal LLMs and produced strong results. However, their coarse-grained holistic credit assignment from a single scalar advantage underfits vision-language (VL) tasks, where outputs are often long-form responses grounded in semantically rich images. To address this limitation, we exploit a structured signal that single-scalar formulations discard: the natural segmentation of long-form VL outputs. Concretely, we propose Segment-Decomposed GRPO (SD-GRPO), which z-normalizes verifiable per-segment rewards across the rollout group, yielding a vector of per-segment advantages in place of a single scalar. We evaluate SD-GRPO across three settings spanning controlled and real-world long-form VL generation, organized by increasing semantic entanglement across segments. On a controlled multi-panel dense-captioning task constructed from DOCCI, where segments are semantically independent, SD-GRPO consistently outperforms the GRPO baseline, with larger gains at higher segment counts. Extending to a controlled multi-chart long-form VQA task constructed from MultiChartQA, we show both theoretically and empirically that rollout-level rewards suffer from cross-segment credit misattribution that scales with output length. On a real-world scientific figure captioning task on the MMSci dataset, where subfigure captions share context across the figure, blending holistic and per-segment rewards further improves on both, suggesting per-segment normalization alone is insufficient when segments are semantically entangled. Finally, by integrating SD-GRPO into Dr. GRPO, we confirm that it can be applied to any GRPO framework with minimal implementation overhead to enhance long-form VL generation.

cs.CV

SSTL: Self-Sensing Tendon Loop for Hysteresis Modeling and Compensation in Tendon-Sheath Mechanisms

Flexible endoscopic robots enable minimally invasive access through natural orifices, but their control accuracy is limited by configuration-dependent hysteresis in the tendon-sheath mechanisms (TSMs). Tendon-sheath friction and tendon elasticity induce a systematic discrepancy between the proximal actuation input and distal output, and this discrepancy varies with the insertion tube configuration. To address this challenge, this paper proposes the Self-Sensing Tendon Loop (SSTL), a double-pass tendon loop routed through the insertion tube and wrapped around a distal pulley, and returned to the proximal end. The loop structure allows both the input and output tensions of the SSTL to be measured proximally, thereby providing an input-output tension profile without requiring distal force or fiber-optic sensors. Because the SSTL shares the same routing path as the actuation TSM, the two TSMs exhibit strongly correlated hysteresis behaviors. From the SSTL tension profile, a learning-based mapping estimates the configuration-dependent hysteresis parameters of the actuation TSM, which are then used by a feedforward controller to compensate for actuation hysteresis. We validate the proposed method by tracking actuation tendon tension under three different insertion tube configurations. Across sinusoidal and random trajectories, the proposed method reduces average RMSE by 88.1% compared with the uncompensated baseline, achieving 97.8% of the performance of direct identification, which requires direct measurement of the input and output tension profile of the actuation TSM.

cs.RO

MarUco: A Markerless 6D Pose Estimation Framework for Closed-Loop Control of Surgical Continuum Manipulators

Flexible endoscopic continuum manipulators offer high dexterity and access to complex anatomy, but nonlinear hysteresis limits feedforward control accuracy. Closed-loop control can compensate for these errors but requires accurate six-degree-of-freedom (6D) end-effector pose feedback. We present MarUco, a markerless 6D pose estimation framework for closed-loop control using only stereo vision during operation. A photorealistic pseudo-rigid-body simulation pipeline generates large-scale annotated training data without manual labeling. A multifeature fusion network integrates masks, keypoints, heatmaps, and bounding boxes from both stereo views to estimate an initial pose, followed by a learned single-pass render-and-compare module that refines the pose without iterative optimization. Kinematics-free hand-eye calibration estimates camera-to-robot-base extrinsics, and self-supervised adaptation uses unlabeled real stereo pairs to mitigate sim-to-real pose error. Across 1,000 real samples, MarUco achieves translation and rotation errors of 0.78 $\pm$ 0.50 mm and 3.07 $\pm$ 1.25{\deg}, respectively, with a total processing time of 52.4 ms per stereo pair. In closed-loop experiments over eight reference paths, MarUco achieves a mean terminal translation error of 1.8 mm, an 88% reduction relative to uncompensated open-loop control. To the best of our knowledge, this is the first markerless position-based visual servoing framework for continuum manipulators.

cs.RO

Vibration-Assisted Hysteresis Mitigation for Achieving High Compensation Efficiency

Tendon-sheath mechanisms (TSMs) are widely used in minimally invasive surgical (MIS) applications, but their inherent hysteresis-caused by friction, backlash, and tendon elongation-leads to significant tracking errors. Conventional modeling and compensation methods struggle with these nonlinearities and require extensive parameter tuning. To address this, we propose a vibration-assisted hysteresis compensation approach, where controlled vibrational motion is applied along the tendon's movement direction to mitigate friction and reduce dead zones. Experimental results demonstrate that the exerted vibration consistently reduces hysteresis across all tested frequencies, decreasing RMSE by up to 23.41% (from 2.2345 mm to 1.7113 mm) and improving correlation, leading to more accurate trajectory tracking. When combined with a Temporal Convolutional Network (TCN)-based compensation model, vibration further enhances performance, achieving an 85.2% reduction in MAE (from 1.334 mm to 0.1969 mm). Without vibration, the TCN-based approach still reduces MAE by 72.3% (from 1.334 mm to 0.370 mm) under the same parameter settings. These findings confirm that vibration effectively mitigates hysteresis, improving trajectory accuracy and enabling more efficient compensation models with fewer trainable parameters. This approach provides a scalable and practical solution for TSM-based robotic applications, particularly in MIS.

cs.RO

OFF-CLIP: Improving Normal Detection Confidence in Radiology CLIP with Simple Off-Diagonal Term Auto-Adjustment

Contrastive Language-Image Pre-Training (CLIP) has enabled zero-shot classification in radiology, reducing reliance on manual annotations. However, conventional contrastive learning struggles with normal case detection due to its strict intra-sample alignment, which disrupts normal sample clustering and leads to high false positives (FPs) and false negatives (FNs). To address these issues, we propose OFF-CLIP, a contrastive learning refinement that improves normal detection by introducing an off-diagonal term loss to enhance normal sample clustering and applying sentence-level text filtering to mitigate FNs by removing misaligned normal statements from abnormal reports. OFF-CLIP can be applied to radiology CLIP models without requiring any architectural modifications. Experimental results show that OFF-CLIP significantly improves normal classification, achieving a 0.61 Area under the curve (AUC) increase on VinDr-CXR over CARZero, the state-of-the-art zero-shot classification baseline, while maintaining or improving abnormal classification performance. Additionally, OFF-CLIP enhances zero-shot grounding by improving pointing game accuracy, confirming better anomaly localization. These results demonstrate OFF-CLIP's effectiveness as a robust and efficient enhancement for medical vision-language models.

cs.CV

SAM: Semi-Active Mechanism for Extensible Continuum Manipulator and Real-time Hysteresis Compensation Control Algorithm

Cable-Driven Continuum Manipulators (CDCMs) enable scar-free procedures but face limitations in workspace and control accuracy due to hysteresis. We introduce an extensible CDCM with a Semi-active Mechanism (SAM) and develop a real-time hysteresis compensation control algorithm using a Temporal Convolutional Network (TCN) based on data collected from fiducial markers and RGBD sensing. Performance validation shows the proposed controller significantly reduces hysteresis by up to 69.5% in random trajectory tracking test and approximately 26% in the box pointing task. The SAM mechanism enables access to various lesions without damaging surrounding tissues. The proposed controller with TCN-based compensation effectively predicts hysteresis behavior and minimizes position and joint angle errors in real-time, which has the potential to enhance surgical task performance.

cs.RO

Optimizing Base Placement of Surgical Robot: Kinematics Data-Driven Approach by Analyzing Working Pattern

In robot-assisted minimally invasive surgery (RAMIS), optimal placement of the surgical robot base is crucial for successful surgery. Improper placement can hinder performance because of manipulator limitations and inaccessible workspaces. Conventional base placement relies on the experience of trained medical staff. This study proposes a novel method for determining the optimal base pose based on the surgeon's working pattern. The proposed method analyzes recorded end-effector poses using a machine learning-based clustering technique to identify key positions and orientations preferred by the surgeon. We introduce two scoring metrics to address the joint limit and singularity issues: joint margin and manipulability scores. We then train a multi-layer perceptron regressor to predict the optimal base pose based on these scores. Evaluation in a simulated environment using the da Vinci Research Kit shows unique base pose score maps for four volunteers, highlighting the individuality of the working patterns. Results comparing with 20,000 randomly selected base poses suggest that the score obtained using the proposed method is 28.2% higher than that obtained by random base placement. These results emphasize the need for operator-specific optimization during base placement in RAMIS.

cs.RO

Hysteresis Compensation of Flexible Continuum Manipulator using RGBD Sensing and Temporal Convolutional Network

Flexible continuum manipulators are valued for minimally invasive surgery, offering access to confined spaces through nonlinear paths. However, cable-driven manipulators face control difficulties due to hysteresis from cabling effects such as friction, elongation, and coupling. These effects are difficult to model due to nonlinearity and the difficulties become even more evident when dealing with long and coupled, multi-segmented manipulator. This paper proposes a data-driven approach based on Deep Neural Networks (DNN) to capture these nonlinear and previous states-dependent characteristics of cable actuation. We collect physical joint configurations according to command joint configurations using RGBD sensing and 7 fiducial markers to model the hysteresis of the proposed manipulator. Result on a study comparing the estimation performance of four DNN models show that the Temporal Convolution Network (TCN) demonstrates the highest predictive capability. Leveraging trained TCNs, we build a control algorithm to compensate for hysteresis. Tracking tests in task space using unseen trajectories show that the proposed control algorithm reduces the average position and orientation error by 61.39% (from 13.7mm to 5.29 mm) and 64.04% (from 31.17{\deg} to 11.21{\deg}), respectively. This result implies that the proposed calibrated controller effectively reaches the desired configurations by estimating the hysteresis of the manipulator. Applying this method in real surgical scenarios has the potential to enhance control precision and improve surgical performance.

cs.RO

Integrating ChatGPT into Secure Hospital Networks: A Case Study on Improving Radiology Report Analysis

This study demonstrates the first in-hospital adaptation of a cloud-based AI, similar to ChatGPT, into a secure model for analyzing radiology reports, prioritizing patient data privacy. By employing a unique sentence-level knowledge distillation method through contrastive learning, we achieve over 95% accuracy in detecting anomalies. The model also accurately flags uncertainties in its predictions, enhancing its reliability and interpretability for physicians with certainty indicators. These advancements represent significant progress in developing secure and efficient AI tools for healthcare, suggesting a promising future for in-hospital AI applications with minimal supervision.

cs.AI