Searcharxiv⌕ Search

arXiv subjects

Junjian Qi

Publications and source records attributed to Junjian Qi.

27 records · Page 2Linked to original sources
arXiv2016

Dynamic State Estimation for Multi-Machine Power System by Unscented Kalman Filter with Enhanced Numerical Stability

In this paper, in order to enhance the numerical stability of the unscented Kalman filter (UKF) used for power system dynamic state estimation, a new UKF with guaranteed positive semidifinite estimation error covariance (UKF-GPS) is proposed and compared with five existing approaches, including UKF-schol, UKF-$κ$, UKF-modified, UKF-$ΔQ$, and the square-root unscented Kalman filter (SR-UKF). These methods and the extended Kalman filter (EKF) are tested by performing dynamic state estimation on WSCC 3-machine 9-bus system and NPCC 48-machine 140-bus system. For WSCC system, all methods obtain good estimates. However, for NPCC system, both EKF and the classic UKF fail. It is found that UKF-schol, UKF-$κ$, and UKF-$ΔQ$ do not work well in some estimations while UKF-GPS works well in most cases. UKF-modified and SR-UKF can always work well, indicating their better scalability mainly due to the enhanced numerical stability.

math.OC↗
arXiv2016

Adaptive Optimal PMU Placement Based on Empirical Observability Gramian

In this paper, we compare four measures of the empirical observability gramian, including the determinant, the trace, the minimum eigenvalue, and the condition number, which can be used to quantify the observability of system states and to obtain the optimal PMU placement for power system dynamic state estimation. An adaptive optimal PMU placement method is proposed by automatically choosing proper measures as the objective function. It is shown that when the number of PMUs is small and thus the observability is very weak, the minimum eigenvalue and the condition number are better measures of the observability and are preferred to be chosen as the objective function. The effectiveness of the proposed method is validated by performing dynamic state estimation on an Northeast Power Coordinating Council (NPCC) 48-machine 140-bus system with the square-root unscented Kalman filter.

math.OC↗
arXiv2016

Risk Mitigation for Dynamic State Estimation Against Cyber Attacks and Unknown Inputs

Phasor measurement units (PMUs) can be effectively utilized for the monitoring and control of the power grid. As the cyber-world becomes increasingly embedded into power grids, the risks of this inevitable evolution become serious. In this paper, we present a risk mitigation strategy, based on dynamic state estimation, to eliminate threat levels from the grid's unknown inputs and potential cyber-attacks. The strategy requires (a) the potentially incomplete knowledge of power system models and parameters and (b) real-time PMU measurements. First, we utilize a dynamic state estimator for higher order depictions of power system dynamics for simultaneous state and unknown inputs estimation. Second, estimates of cyber-attacks are obtained through an attack detection algorithm. Third, the estimation and detection components are seamlessly utilized in an optimization framework to determine the most impacted PMU measurements. Finally, a risk mitigation strategy is proposed to guarantee the elimination of threats from attacks, ensuring the observability of the power system through available, safe measurements. Case studies are included to validate the proposed approach. Insightful suggestions, extensions, and open problems are also posed.

eess.SY↗
arXiv2015

Decentralized Voltage and Power Regulation Control of Excitation and Governor System with Global Asymptotic Stability

The Global Asymptotic Stability (GAS), Voltage Regulation (VR), and Power Regulation (PR) of the excitation and governor control system are of critical importance for power system security. However, simultaneously fulfilling GAS, VR, and PR has not yet been achieved. In order to solve this problem, in this paper, we propose a Lyapunov-based decentralized Control (LBC) for the excitation and governor system of multi-machine power system. A completely controllable linear system is actively constructed to design the time-derivative of the Lyapunov function and GAS is guaranteed by satisfying the condition of GAS in Lyapunov theorem. At the same time, VR and PR are performed by introducing both voltage and power to the feedback. The effectiveness of the proposed method is tested and validated on a six-machine power system.

math.OC↗
arXiv2015

Dynamic State Estimation under Cyber Attacks: A Comparative Study of Kalman Filters and Observers

Utilizing highly synchronized measurements from synchrophasors, dynamic state estimation (DSE) can be applied for real-time monitoring of smart grids. Concurrent DSE studies for power systems are intolerant to unknown inputs and potential attack vectors --- a research gap we will fill in this work. Particularly, we (a) present an overview of concurrent estimation techniques, highlighting key deficiencies, (b) develop DSE methods based on cubature Kalman filter and dynamic observers, (c) rigorously examine the strengths and weaknesses of the proposed methods under attack-vectors and unknown inputs, and (d) provide comprehensive recommendations for DSE. Numerical results and in-depth remarks are also presented.

eess.SY↗
arXiv2014

Optimal PMU Placement for Power System Dynamic State Estimation by Using Empirical Observability Gramian

In this paper the empirical observability Gramian calculated around the operating region of a power system is used to quantify the degree of observability of the system states under specific phasor measurement unit (PMU) placement. An optimal PMU placement method for power system dynamic state estimation is further formulated as an optimization problem which maximizes the determinant of the empirical observability Gramian and is efficiently solved by the NOMAD solver, which implements the Mesh Adaptive Direct Search (MADS) algorithm. The implementation, validation, and also the robustness to load fluctuations and contingencies of the proposed method are carefully discussed. The proposed method is tested on WSCC 3-machine 9-bus system and NPCC 48-machine 140-bus system by performing dynamic state estimation with square-root unscented Kalman filter. The simulation results show that the determined optimal PMU placements by the proposed method can guarantee good observability of the system states, which further leads to smaller estimation errors and larger number of convergent states for dynamic state estimation compared with random PMU placements. Under optimal PMU placements an obvious observability transition can be observed. The proposed method is also validated to be very robust to both load fluctuations and contingencies.

math.OC↗
arXiv2014

An Interaction Model for Simulation and Mitigation of Cascading Failures

In this paper the interactions between component failures are quantified and the interaction matrix and interaction network are obtained. The quantified interactions can capture the general propagation patterns of the cascades from utilities or simulation, thus helping to better understand how cascading failures propagate and to identify key links and key components that are crucial for cascading failure propagation. By utilizing these interactions a high-level probabilistic model called interaction model is proposed to study the influence of interactions on cascading failure risk and to support online decision-making. It is much more time efficient to first quantify the interactions between component failures with fewer original cascades from a more detailed cascading failure model and then perform the interaction model simulation than it is to directly simulate a large number of cascades with a more detailed model. Interaction-based mitigation measures are suggested to mitigate cascading failure risk by weakening key links, which can be achieved in real systems by wide area protection such as blocking of some specific protective relays. The proposed interaction quantifying method and interaction model are validated with line outage data generated by the AC OPA cascading simulations on the IEEE 118-bus system.

eess.SY↗
arXiv2013

A Cascading Failure Model by Quantifying Interactions

Cascading failures triggered by trivial initial events are encountered in many complex systems. It is the interaction and coupling between components of the system that causes cascading failures. We propose a simple model to simulate cascading failure by using the matrix that determines how components interact with each other. A careful comparison is made between the original cascades and the simulated cascades by the proposed model. It is seen that the model can capture general features of the original cascades, suggesting that the interaction matrix can well reflect the relationship between components. An index is also defined to identify important links and the distribution follows an obvious power law. By eliminating a small number of most important links the risk of cascading failures can be significantly mitigated, which is dramatically different from getting rid of the same number of links randomly.

physics.soc-ph↗