arXiv subjects

Junlin Wang

Publications and source records attributed to Junlin Wang.

45 records · Page 3Linked to original sources

arXiv2020

Timescales and contribution of heating and helicity effect in helicity-dependent all-optical switching

The manipulation of the magnetic direction by using the ultrafast laser pulse is attractive for its great advantages in terms of speed and energy efficiency for information storage applications. However, the heating and helicity effects induced by circularly polarized laser excitation are entangled in the helicity-dependent all-optical switching (HD-AOS), which hinders the understanding of magnetization dynamics involved. Here, by applying a dual-pump laser excitation, first with a linearly polarized (LP) laser pulse followed by a circularly polarized (CP) laser pulse, we identify the timescales and contribution from heating and helicity effects in HD-AOS with a Pt/Co/Pt triple layer. When the sample is preheated by the LP laser pulses to a nearly fully demagnetized state, CP laser pulses with a much-reduced power switches the sample's magnetization. By varying the time delay between the two pump pulses, we show that the helicity effect, which gives rise to the deterministic helicity induced switching, onsets instantly upon laser excitation, and only exists for less than 0.2 ps close to the laser pulse duration of 0.15 ps. The results reveal that that the transient magnetization state upon which CP laser pulses impinge is the key factor for achieving HD-AOS, and importantly, the tunability between heating and helicity effects with the unique dual-pump laser excitation approach will enable HD-AOS in a wide range of magnetic material systems for the potential ultrafast spintronics applications.

cond-mat.mtrl-sci↗

arXiv2020

Defect-Correlated Skyrmions and Controllable Generation in Perpendicularly Magnetized CoFeB Ultrathin Films

Skyrmions have attracted significant interest due to their topological spin structures and fascinating physical features. The skyrmion phase arises in materials with Dzyaloshinskii-Moriya (DM) interaction at interfaces or in volume of non-centrosymmetric materials. However, although skyrmions were generated experimentally, one critical intrinsic relationship between fabrication, microstructures, magnetization and the existence of skyrmions remains to be established. Here, two series of CoFeB ultrathin films with controlled atomic scale structures are employed to reveal this relationship. By inverting the growth order, the amount of defects can be artificially tuned, and skyrmions are shown to be preferentially formed at defect sites. The stable region and the density of the skyrmions can be efficiently controlled in the return magnetization loops by utilizing first-order reversal curves to reach various metastable states. These findings establish the general and intrinsic relationship from sample preparation to skyrmion generation, offering an universal method to control skyrmion density.

cond-mat.mes-hall↗

arXiv2019

AllenNLP Interpret: A Framework for Explaining Predictions of NLP Models

Neural NLP models are increasingly accurate but are imperfect and opaque---they break in counterintuitive ways and leave end users puzzled at their behavior. Model interpretation methods ameliorate this opacity by providing explanations for specific model predictions. Unfortunately, existing interpretation codebases make it difficult to apply these methods to new models and tasks, which hinders adoption for practitioners and burdens interpretability researchers. We introduce AllenNLP Interpret, a flexible framework for interpreting NLP models. The toolkit provides interpretation primitives (e.g., input gradients) for any AllenNLP model and task, a suite of built-in interpretation methods, and a library of front-end visualization components. We demonstrate the toolkit's flexibility and utility by implementing live demos for five interpretation methods (e.g., saliency maps and adversarial attacks) on a variety of models and tasks (e.g., masked language modeling using BERT and reading comprehension using BiDAF). These demos, alongside our code and tutorials, are available at https://allennlp.org/interpret .

cs.CL↗

arXiv2019

Enhancement of intrinsic magnetic damping in defect-free epitaxial Fe3O4 thin films

We have investigated the magnetic damping of precessional spin dynamics in defect-controlled epitaxial grown Fe$_3$O$_4$(111)/Yttria-stabilized Zirconia (YSZ) nanoscale films by all-optical pump-probe measurements. The intrinsic damping constant of the defect-free Fe$_3$O$_4$ film is found to be strikingly larger than that of the as-grown Fe$_3$O$_4$ film with structural defects. We demonstrate that the population of the first-order perpendicular standing spin wave (PSSW) mode, which is exclusively observed in the defect-free film under sufficiently high external magnetic fields, leads to the enhancement of the magnetic damping of the uniform precession (Kittel) mode. We propose a physical picture in which the PSSW mode acts as an additional channel for the extra energy dissipation of the Kittel mode. The energy transfer from Kittel mode to PSSW mode increases as in-plane magnetization precession becomes more uniform, resulting in the unique intrinsic magnetic damping enhancement in the defect-free Fe$_3$O$_4$ film.

cond-mat.mtrl-sci↗

arXiv2019

Comfort-Centered Design of a Lightweight and Backdrivable Knee Exoskeleton

This paper presents design principles for comfort-centered wearable robots and their application in a lightweight and backdrivable knee exoskeleton. The mitigation of discomfort is treated as mechanical design and control issues and three solutions are proposed in this paper: 1) a new wearable structure optimizes the strap attachment configuration and suit layout to ameliorate excessive shear forces of conventional wearable structure design; 2) rolling knee joint and double-hinge mechanisms reduce the misalignment in the sagittal and frontal plane, without increasing the mechanical complexity and inertia, respectively; 3) a low impedance mechanical transmission reduces the reflected inertia and damping of the actuator to human, thus the exoskeleton is highly-backdrivable. Kinematic simulations demonstrate that misalignment between the robot joint and knee joint can be reduced by 74% at maximum knee flexion. In experiments, the exoskeleton in the unpowered mode exhibits 1.03 Nm root mean square (RMS) low resistive torque. The torque control experiments demonstrate 0.31 Nm RMS torque tracking error in three human subjects.

cs.RO↗

arXiv2017

Effect of Notch Structure on Magnetic Domain Movement in Planar Nanowires

We present the direct observation of magnetic domain motion in permalloy nanowires with notches using a wide-field Kerr microscopy technique. The domain wall motion can be modulated by the size and shape of the notch structure in the nanowires. It is demonstrated that the coercive fields can be tuned by modulating the notches. The experimental results are consistent with the micro-magnetic simulation results. The relationship between the notch angle and the domain nuclease are also studied. This work is useful for the design and development of the notch-based spintronic devices.

cond-mat.mes-hall↗

arXiv2017

Controllable transport of a skyrmion in a ferromagnetic narrow channel with voltage-controlled magnetic anisotropy

Magnetic skyrmions have potential applications in next-generation spintronics devices with ultralow energy consumption. In this work, the current-driven skyrmion motion in a narrow ferromagnetic nanotrack with voltage-controlled magnetic anisotropy (VCMA) is studied numerically. By utilizing the VCMA effect, the transport of skyrmion can be unidirectional in the nanotrack, leading to a one-way information channel. The trajectory of the skyrmion can also be modulated by periodically located VCMA gates, which protects the skyrmion from destruction by touching the track edge. In addition, the location of the skyrmion can be controlled by adjusting the driving pulse length in the presence of the VCMA effect. Our results provide guidelines for practical realization of the skyrmion-based information channel, diode, and racetrack memory.

cond-mat.mes-hall↗

arXiv2017

Magnetic Domain Wall Engineering in a Nanoscale Permalloy Junction

Nanoscale magnetic junction provides a useful approach to act as the building block for magnetoresistive random access memories (MRAM), where one of the key issues is to control the magnetic domain configuration. Here, we study the domain structure and the magnetic switching in the Permalloy (Fe20Ni80) nanoscale magnetic junctions with different thicknesses by using micromagnetic simulations. It is found that both the 90-degree and 45-degree domain walls can be formed between the junctions and the wire arms depending on the thickness of the device. The magnetic switching fields show distinct thickness dependencies with a broad peak varying from 7 nm to 22 nm depending on the junction sizes, and the large magnetic switching fields favor the stability of the MRAM operation.

physics.comp-ph↗

arXiv2016

Elementary specific spin and orbital moments of ultrathin CoFeB amorphous films on GaAs(100)

Nanoscale CoFeB amorphous films have been synthesized on GaAs(100) and studied with X-ray magnetic circular dichroism (XMCD) and transmission electron microscopy (TEM). We have found that the ratios of the orbital to spin magnetic moments of both the Co and Fe in the ultrathin amorphous film have been enhanced by more than 300% compared with those of the bulk crystalline Co and Fe, and in specifically, a large orbital moment of 0.56*10^-6 B from the Co atoms has been observed and at the same time the spin moment of the Co atoms remains comparable to that of the bulk hcp Co. The results indicate that the large uniaxial magnetic anisotropy (UMA) observed in the ultrathin CoFeB film on GaAs(100) is related to the enhanced spin-orbital coupling of the Co atoms in the CoFeB. This work offers experimental evidences of the correlation between the UMA and the elementary specific spin and orbital moments in the CoFeB amorphous film on the GaAs(100) substrate, which is significant for spintronics applications.

cond-mat.mtrl-sci↗