arXiv subjects

Junling Long

Publications and source records attributed to Junling Long.

12 recordsLinked to original sources

arXiv2022

Implementing two-qubit gates at the quantum speed limit

The speed of elementary quantum gates, particularly two-qubit gates, ultimately sets the limit on the speed at which quantum circuits can operate. In this work, we experimentally demonstrate commonly used two-qubit gates at nearly the fastest possible speed allowed by the physical interaction strength between two superconducting transmon qubits. We achieve this quantum speed limit by implementing experimental gates designed using a machine learning inspired optimal control method. Importantly, our method only requires the single-qubit drive strength to be moderately larger than the interaction strength to achieve an arbitrary two-qubit gate close to its analytical speed limit with high fidelity. Thus, the method is applicable to a variety of platforms including those with comparable single-qubit and two-qubit gate speeds, or those with always-on interactions. We expect our method to offer significant speedups for non-native two-qubit gates that are typically achieved with a long sequence of single-qubit and native two-qubit gates.

quant-ph↗

arXiv2021

A universal quantum gate set for transmon qubits with strong ZZ interactions

High-fidelity single- and two-qubit gates are essential building blocks for a fault-tolerant quantum computer. While there has been much progress in suppressing single-qubit gate errors in superconducting qubit systems, two-qubit gates still suffer from error rates that are orders of magnitude higher. One limiting factor is the residual ZZ-interaction, which originates from a coupling between computational states and higher-energy states. While this interaction is usually viewed as a nuisance, here we experimentally demonstrate that it can be exploited to produce a universal set of fast single- and two-qubit entangling gates in a coupled transmon qubit system. To implement arbitrary single-qubit rotations, we design a new protocol called the two-axis gate that is based on a three-part composite pulse. It rotates a single qubit independently of the state of the other qubit despite the strong ZZ-coupling. We achieve single-qubit gate fidelities as high as 99.1% from randomized benchmarking measurements. We then demonstrate both a CZ gate and a CNOT gate. Because the system has a strong ZZ-interaction, a CZ gate can be achieved by letting the system freely evolve for a gate time $t_g=53.8$ ns. To design the CNOT gate, we utilize an analytical microwave pulse shape based on the SWIPHT protocol for realizing fast, low-leakage gates. We obtain fidelities of 94.6% and 97.8% for the CNOT and CZ gates respectively from quantum progress tomography.

quant-ph↗

arXiv2021

Universal Dephasing Noise Injection via Schrodinger Wave Autoregressive Moving Average Models

We present and validate a novel method for noise injection of arbitrary spectra in quantum circuits that can be applied to any system capable of executing arbitrary single qubit rotations, including cloud-based quantum processors. As the consequences of temporally-correlated noise on the performance of quantum algorithms are not well understood, the capability to engineer and inject such noise in quantum systems is paramount. To date, noise injection capabilities have been limited and highly platform specific, requiring low-level access to control hardware. We experimentally validate our universal method by comparing to a direct hardware-based noise-injection scheme, using a combination of quantum noise spectroscopy and classical signal analysis to show that the two approaches agree. These results showcase a highly versatile method for noise injection that can be utilized by theoretical and experimental researchers to verify, evaluate, and improve quantum characterization protocols and quantum algorithms for sensing and computing.

quant-ph↗

arXiv2020

Overlap junctions for superconducting quantum electronics and amplifiers

Due to their unique properties as lossless, nonlinear circuit elements, Josephson junctions lie at the heart of superconducting quantum information processing. Previously, we demonstrated a two-layer, submicrometer-scale overlap junction fabrication process suitable for qubits with long coherence times. Here, we extend the overlap junction fabrication process to micrometer-scale junctions. This allows us to fabricate other superconducting quantum devices. For example, we demonstrate an overlap-junction-based Josephson parametric amplifier that uses only 2 layers. This efficient fabrication process yields frequency-tunable devices with negligible insertion loss and a gain of ~ 30 dB. Compared to other processes, the overlap junction allows for fabrication with minimal infrastructure, high yield, and state-of-the-art device performance.

physics.app-ph↗

arXiv2019

Amplitude and frequency sensing of microwave fields with a superconducting transmon qudit

Experiments with superconducting circuits require careful calibration of the applied pulses and fields over a large frequency range. This remains an ongoing challenge as commercial semiconductor electronics are not able to probe signals arriving at the chip due to its cryogenic environment. Here, we demonstrate how the on-chip amplitude and frequency of a microwave signal can be inferred from the ac Stark shifts of higher transmon levels. In our time-resolved measurements we employ Ramsey fringes, allowing us to detect the amplitude of the systems transfer function over a range of several hundreds of MHz with an energy sensitivity on the order of $10^{-4}$. Combined with similar measurements for the phase of the transfer function, our sensing method can facilitate pulse correction for high fidelity quantum gates in superconducting circuits. Additionally, the potential to characterize arbitrary microwave fields promotes applications in related areas of research, such as quantum optics or hybrid microwave systems including photonic, mechanical or magnonic subsystems.

quant-ph↗

arXiv2019

Efficient quantum state tomography with auxiliary Hilbert space

Quantum state tomography is an important tool for quantum communication, computation, metrology, and simulation. Efficient quantum state tomography on a high dimensional quantum system is still a challenging problem. Here, we propose a novel quantum state tomography method, auxiliary Hilbert space tomography, to avoid pre-rotations before measurement in a quantum state tomography experiment. Our method requires projective measurements in a higher dimensional space that contains the subspace that includes the prepared states. We experimentally demonstrate this method with orbital angular momentum states of photons. In our experiment, the quantum state tomography measurements are as simple as taking a photograph with a camera. We experimentally verify our method with near-pure- and mixed-states of orbital angular momentum with dimension up to $d=13$, and achieve greater than 95 % state fidelities for all states tested. This method dramatically reduces the complexity of measurements for full quantum state tomography, and shows potential application in various high dimensional quantum information tasks.

quant-ph↗

arXiv2019

Microwave-based Arbitrary CPHASE Gates for Transmon Qubits

Superconducting transmon qubits are of great interest for quantum computing and quantum simulation. A key component of quantum chemistry simulation algorithms is breaking up the evolution into small steps, which naturally leads to the need for non-maximally entangling, arbitrary CPHASE gates. Here we design such microwave-based gates using an analytically solvable approach leading to smooth, simple pulses. We use the local invariants of the evolution operator in $SU(4)$ to develop a method of constructing pulse protocols, which allows for the continuous tuning of the phase. We find CPHASE fidelities of more than $0.999$ and gate times as low as $100\text{ ns}$.

quant-ph↗

arXiv2018

Kinetic Inductance Traveling Wave Amplifiers For Multiplexed Qubit Readout

We describe a kinetic inductance traveling-wave (KIT) amplifier suitable for superconducting quantum information measurements and characterize its wideband scattering and noise properties. We use mechanical microwave switches to calibrate the four amplifier scattering parameters up to the device input and output connectors at the dilution refrigerator base temperature and a tunable temperature load to characterize the amplifier noise. Finally, we demonstrate the high fidelity simultaneous dispersive readout of two superconducting transmon qubits. The KIT amplifier provides low-noise amplification of both readout tones with readout fidelities of 83% and 89% and negligible effect on qubit lifetime and coherence.

quant-ph↗

arXiv2018

Enhanced Superconducting Transition Temperature in Electroplated Rhenium

We show that electroplated Re films in multilayers with noble metals such as Cu, Au, and Pd have an enhanced superconducting critical temperature relative to previous methods of preparing Re. The dc resistance and magnetic susceptibility indicate a critical temperature of approximately 6 K. Magnetic response as a function of field at 1.8 K demonstrates type-II superconductivity, with an upper critical field on the order of 2.5 T. Critical current densities greater than 10^7 A/m^2 were measured above liquid-helium temperature. Low-loss at radio frequency was obtained below the critical temperature for multilayers deposited onto resonators made with Cu traces on commercial circuit boards. These electroplated superconducting films can be integrated into a wide range of standard components for low-temperature electronics.

cond-mat.supr-con↗

arXiv2017

Electromagnetically induced transparency in circuit QED with nested polariton states

Electromagnetically induced transparency (EIT) is a signature of quantum interference in an atomic three-level system. By driving the dressed cavity-qubit states of a two-dimensional circuit QED system, we generate a set of polariton states in the nesting regime. The lowest three energy levels are utilized to form the $\Lambda$-type system. EIT is observed and verified by Akaike's information criterion based testing. Negative group velocities up to $-0.52\pm0.09$ km/s are obtained based on the dispersion relation in the EIT transmission spectrum.

quant-ph↗

arXiv2013

Evaluating Laguerre-Gaussian beams with an invariant parameter

We define a new parameter about Laguerre-Gaussian (LG) beams, named $Q^{l}_{p}$, which is only related to mode indices $p$ and $l$. This parameter is able to both evaluate and distinguish LG beams. The $Q^{l}_{p}$ values are first calculated theoretically and then measured experimentally for several different LG beams. Another mode quality parameter, $ M^{2} $ value, is also measured. The comparison between $Q^{l}_{p}$ and $ M^{2}$ shows same trend for the quality of LG mode, while the measurement of $Q^{l}_{p}$ is much easier than $ M^{2}$.

physics.optics↗

arXiv2013

Characterizing vortex beam with angular-double-slit interference

The Fraunhofer diffraction intensity distribution of Laguerre-Gaussian beam is studied in an angular-double-slit interferometer. We demonstrate that the spiral phase structure of vortex light can be clearly revealed in this interference geometry, and it gives us an efficient way to distinguish different order of Laguerre-Gaussian beams. This angular-double-slit interference gives us a better understanding to the nature of orbital angular momentum and the interpretation of vortex beams interference phenomenon.

physics.optics↗