arXiv subjects

Junna Sugiyama

Publications and source records attributed to Junna Sugiyama.

7 recordsLinked to original sources

arXiv2026

The Simons Observatory: Overview of the Cryogenic Half-wave Plate Polarization Modulators

The Simons Observatory (SO) is a ground-based Cosmic Microwave Background (CMB) experiment that is located in the Atacama plateau. The Small Aperture Telescopes (SATs) of SO are optimized for polarimetry on the degree scale. Atmospheric $1/f$ contamination of the CMB signal poses a significant challenge for observations at this angular scale. In order to control the $1/f$ noise, the SATs utilize a Cryogenic Half-Wave Plate (CHWP) in their optics. The CHWP modulates the polarization signal to a higher frequency to separate it from the unpolarized atmospheric noise. Precision measurements of the CHWP rotation angle are required to successfully recover the target polarized signals. We present a method to reconstruct the CHWP rotation angle that achieves a noise level of 0.16 $μ\mathrm{rad\sqrt{s}}$, meeting our requirement.

astro-ph.IM↗

arXiv2026

The Simons Observatory: Rotation Performance of Cryogenic Half-Wave Plate Polarization Modulators

We present the on-site rotation performance of the first three cryogenic continuously rotating half-wave plate (HWP) polarization modulators for the Simons Observatory small aperture telescopes (SATs). The SATs operate at an altitude of 5200 m in the Atacama Desert in northern Chile, and measure the degree-scale cosmic microwave background polarization to search for primordial $B$-mode polarization. To this end, the SATs employ a 505 mm diameter 50 K cryogenic HWP polarization modulator to suppress atmospheric $1/f$ noise and to mitigate systematic uncertainties. We present methods for reconstructing the rotation of our polarization modulators, enabling detailed evaluations of their rotation angle accuracy, stability, displacements, and vibrations. We achieve the required rotation angle accuracy in more than 99.9% of observations, with a median noise level of 0.16 $μ$rad$\sqrt{\text{s}}$. We also achieve one-dimensional measurement of the rotor displacement with an accuracy of 0.06 $μ\text{m}\sqrt{\text{s}}$. Our results demonstrate the on-site rotation performance, rotation angle reconstruction method, and robustness of the polarization angle modulators. This is a crucial step towards achieving the SAT science goals.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Large Diameter and Large Load-Capacity Superconducting Magnetic Bearing for a Millimeter-Wave Polarization Modulator

We present the design methodology and characterization of a superconducting magnetic bearing (SMB) system for the polarization modulator in the SAT-LF, one of the small aperture telescopes (SATs) in the Simons Observatory (SO) that is sensitive at 30/40 GHz frequency bands. SO is a ground-based cosmic microwave background (CMB) polarization experiment, with the SATs specifically aiming to search for primordial parity-odd polarization anisotropies at degree scales. Each SAT is equipped with a cryogenic, continuously rotating half-wave plate (HWP) as a polarization modulator to mitigate atmospheric $1/f$ noise and instrumental systematics. The HWP system employs an SMB, consisting of a ring-shaped magnet and superconductor, to achieve a 550 mm clear aperture and stable 2 Hz rotation at a temperature of around 50 K. One challenge for the HWP system in the SAT-LF is the large 35 kg load on the SMB due to the thicker HWP than in previous telescopes. Since the SMB stiffness is critical for maintaining the alignment of the HWP in the telescope, we developed a method to quantitatively predict the stiffness using finite element simulations with the so-called H-formulation. We evaluated the stiffness for various geometries of the magnet and superconductor, thereby optimizing their dimensions. The prediction is in excellent agreement with experimental measurements of the fabricated SMB, demonstrating a $\sim$5\% accuracy. We also demonstrated that the SMB achieves sufficiently low friction-induced heat dissipation, measured at 0.26 W when rotating at 2 Hz. The design methodology and the implementation of the SMB demonstrated here not only provides an enabling technology for the SO SAT-LF, but also is a crucial stepping stone for future CMB experiments that make use of HWP polarization modulators.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Design, integration, and testing of the small aperture telescopes

The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35$^\circ$ field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and $<0.1$ K focal plane that holds $>12,000$ TES detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Development and Optical Evaluation of Achromatic Half-Wave Plates

The Simons Observatory (SO) experiment is a cosmic microwave background (CMB) experiment located in the Atacama Desert, Chile. The SO' s small aperture telescopes (SATs) consist of three telescopes designed for precise CMB polarimetry at large angular scales. Each SAT uses a cryogenic rotating half-wave plate (HWP) as a polarization modulator to mitigate atmospheric 1/f noise and other systematics. To realize efficient polarization modulation over the observation bands, we fabricated an achromatic HWP (AHWP) consisting of three sapphire plates with anti-reflection coatings. The AHWP is designed to have broadband modulation efficiency and transmittance. This paper reports on the design and the preliminary characterization of the AHWPs for SATs.

astro-ph.IM↗

arXiv2024

Precipitable water vapour measurement using GNSS data in the Atacama Desert for millimetre and submillimetre astronomical observations

Precipitable water vapour (PWV) strongly affects the quality of data obtained from millimetre- and submillimetre-wave astronomical observations, such as those for cosmic microwave background measurements. Some of these observatories have used radiometers to monitor PWV. In this study, PWV was measured from 2021 April to 2022 April using Global Navigation Satellite System (GNSS) instruments in the Atacama Desert, Chile, where several millimetre- and submillimetre-wave telescopes are located. We evaluated the accuracy of these measurements by comparing them to radiometer measurements. We calculated the PWV from GNSS data using CSRS-PPP (Canadian Spatial Reference System Precise Point Positioning), an online software package. When using GNSS data alone, the estimated PWV showed a systematic offset of +1.08 mm. When combining GNSS data with data from a barometer, which was co-located with the GNSS receiver, the estimated PWV showed a lower systematic offset of -0.05 mm. The GNSS PWV showed a statistical uncertainty of 0.52 mm with an averaging time of an hour. Compared to other PWV measurement methods, GNSS instruments are robust in bad weather conditions, have sufficient time resolution, and are less expensive. By demonstrating good accuracy and precision in low-PWV conditions, this paper shows that GNSS instruments are valuable tools for PWV measurements for observing site evaluation and data analysis for ground-based telescopes.

astro-ph.IM↗

arXiv2023

Anti-reflection coating with mullite and Duroid for large-diameter cryogenic sapphire and alumina optics

We developed a broadband two-layer anti-reflection (AR) coating for use on a sapphire half-wave plate (HWP) and an alumina infrared (IR) filter for the cosmic microwave background (CMB) polarimetry. Measuring the faint CMB B-mode signals requires maximizing the number of photons reaching the detectors and minimizing spurious polarization due to reflection with an off-axis incident angle. Sapphire and alumina have high refractive indices of 3.1 and are highly reflective without an AR coating. This paper presents the design, fabrication, quality control, and measured performance of an AR coating using thermally-sprayed mullite and Duroid 5880LZ. This technology enables large optical elements with diameters of 600 mm. We also present a newly developed thermography-based nondestructive quality control technique, which is key to assuring good adhesion and preventing delamination when thermal cycling. We demonstrate the average reflectance of about 2.6% (0.9%) for two observing bands centered at 90/150 (220/280) GHz. At room temperature, the average transmittance of a 105 mm square test sample at 220/280 GHz is 83%, and it will increase to 90% at 100 K, attributed to reduced absorption losses. Therefore, our developed layering technique has proved effective for 220/280 GHz applications, particularly in addressing dielectric loss concerns. This AR coating technology has been deployed in the cryogenic HWP and IR filters of the Simons Array and the Simons observatory experiments and applies to future experiments such as CMB-S4.

astro-ph.IM↗