arXiv subjects

Junnosuke Kamohara

Publications and source records attributed to Junnosuke Kamohara.

5 recordsLinked to original sources

arXiv2026

GM-Loco: Terrain-Adaptive Humanoid Locomotion on Granular Media

Humanoid locomotion on granular terrain remains a significant challenge due to its complex foot-terrain interaction dynamics that are difficult to model. Existing approaches either ignore granular contact dynamics or incorporate simplified normal force models with heuristic tangential components. In this work, we present a physics-grounded granular contact model based on three-dimensional resistive force theory (3D RFT) and efficiently simulate granular terrain for reinforcement learning (RL) training. Unlike traditional rigid contact models and simplified granular contact models with ad-hoc heuristics, our contact solver produces physically accurate granular intrusion dynamics without resorting to heuristics. It captures realistic penetration and tangential drag during training, enabling the policy to learn behaviors that transfer reliably to real-world granular terrain where rigid contact models fail. To adapt to varying terrain conditions, we train a terrain-adaptive locomotion controller via teacher-student RL, using a variational autoencoder to encode terrain information into a compact latent representation. Simulation studies using material point method (MPM) with NVIDIA Newton demonstrate that our method generalizes to unseen granular terrains, achieves a significantly higher success rate than baselines, and demonstrates zero-shot terrain identification and adaptation. We further validate our approach through extensive hardware experiments across diverse real-world granular terrains including basalt, dry sand, and beach sand. To the best of our knowledge, this is the first demonstration of agile humanoid locomotion on real-world granular terrain. Project page: https://humanoid-gm-locomotion.github.io/HUMANOID-GM/

cs.RO↗

arXiv2026

Robust bipedal locomotion on flowable slopes via foot-driven terrain manipulation

Bipedal robots are challenging to control because they operate close to instability, where small variations in foot-terrain contact can rapidly destabilize locomotion. On rigid terrain, bipedal robots mitigate this fragility by using well-established contact mechanics and control strategies. On flowable surfaces such as granular slopes, foot contact can induce large surface deformations and solid-fluid-like transitions, coupling terrain effects with robot dynamics, leading to underperformance or failure. This is partly due to the lack of reliable methods to represent the dynamics of flowable terrain, making it difficult to account for terrain effects in locomotion design. Here, we investigate how controlling terrain response can improve bipedal locomotion on granular slopes by studying the terradynamics of cleated feet, thin plates emanating from the foot soles. Systematic studies of a small-scale (1.4 kg) robophysical biped reveal that cleats with sparse and dense spacing lead to excessive terrain yielding and resistance, respectively, degrading performance and leading to failure. An intermediate cleat spacing distributes interaction forces to maintain substrate stresses near (or below) the yield threshold, enabling walking on granular slopes up to 30 degrees. Guided by these principles, we design a foot that actively adjusts cleat depth and accommodates both rigid and granular terrain. We also demonstrate that the principles of effective foot-terrain interaction translate to a larger (15 kg) autonomous biped. Our study presents an alternative to conventional body-centric robot control approaches, which regulate terrain-induced effects through body motion, by instead regulating terrain interactions through limb-centric approach.

cs.RO↗

arXiv2025

RL-augmented Adaptive Model Predictive Control for Bipedal Locomotion over Challenging Terrain

Model predictive control (MPC) has demonstrated effectiveness for humanoid bipedal locomotion; however, its applicability in challenging environments, such as rough and slippery terrain, is limited by the difficulty of modeling terrain interactions. In contrast, reinforcement learning (RL) has achieved notable success in training robust locomotion policies over diverse terrain, yet it lacks guarantees of constraint satisfaction and often requires substantial reward shaping. Recent efforts in combining MPC and RL have shown promise of taking the best of both worlds, but they are primarily restricted to flat terrain or quadrupedal robots. In this work, we propose an RL-augmented MPC framework tailored for bipedal locomotion over rough and slippery terrain. Our method parametrizes three key components of single-rigid-body-dynamics-based MPC: system dynamics, swing leg controller, and gait frequency. We validate our approach through bipedal robot simulations in NVIDIA IsaacLab across various terrains, including stairs, stepping stones, and low-friction surfaces. Experimental results demonstrate that our RL-augmented MPC framework produces significantly more adaptive and robust behaviors compared to baseline MPC and RL.

cs.RO↗

arXiv2024

Modeling of Terrain Deformation by a Grouser Wheel for Lunar Rover Simulation

Simulation of vehicle motion in planetary environments is challenging. This is due to the modeling of complex terrain, optical conditions, and terrain-aware vehicle dynamics. One of the critical issues of typical simulators is that they assume terrain is a rigid body, which limits their ability to render wheel traces and compute the wheel-terrain interactions. This prevents, for example, the use of wheel traces as landmarks for localization, as well as the accurate simulation of motion. In the context of lunar regolith, the surface is not rigid but granular. As such, there are differences in the rover's motion, such as sinkage and slippage, and a clear wheel trace left behind the rover, compared to that on a rigid terrain. This study presents a novel approach to integrating a terramechanics-aware terrain deformation engine to simulate a realistic wheel trace in a digital lunar environment. By leveraging Discrete Element Method simulation results alongside experimental single-wheel test data, we construct a regression model to derive deformation height as a function of contact normal force. The region of interest in a height map is retrieved from the wheel poses. The elevation values of corresponding pixels are subsequently modified using contact normal forces and the regression model. Finally, we apply the determined elevation change to each mesh vertex to render wheel traces during runtime. The deformation engine is integrated into our ongoing development of a lunar simulator based on NVIDIA's Omniverse IsaacSim. We hypothesize that our work will be crucial to testing perception and downstream navigation systems under conditions similar to outdoor or terrestrial fields. A demonstration video is available here: https://www.youtube.com/watch?v=TpzD0h-5hv4

cs.RO↗

arXiv2023

OmniLRS: A Photorealistic Simulator for Lunar Robotics

Developing algorithms for extra-terrestrial robotic exploration has always been challenging. Along with the complexity associated with these environments, one of the main issues remains the evaluation of said algorithms. With the regained interest in lunar exploration, there is also a demand for quality simulators that will enable the development of lunar robots. % In this paper, we explain how we built a Lunar simulator based on Isaac Sim, Nvidia's robotic simulator. In this paper, we propose Omniverse Lunar Robotic-Sim (OmniLRS) that is a photorealistic Lunar simulator based on Nvidia's robotic simulator. This simulation provides fast procedural environment generation, multi-robot capabilities, along with synthetic data pipeline for machine-learning applications. It comes with ROS1 and ROS2 bindings to control not only the robots, but also the environments. This work also performs sim-to-real rock instance segmentation to show the effectiveness of our simulator for image-based perception. Trained on our synthetic data, a yolov8 model achieves performance close to a model trained on real-world data, with 5% performance gap. When finetuned with real data, the model achieves 14% higher average precision than the model trained on real-world data, demonstrating our simulator's photorealism.% to realize sim-to-real. The code is fully open-source, accessible here: https://github.com/AntoineRichard/LunarSim, and comes with demonstrations.

cs.RO↗