arXiv subjects
Publications and source records attributed to Junping Tian.
To aid contributions to the Snowmass 2021 US Community Study on physics at the International Linear Collider and other proposed $e^+e^-$ colliders, we present a list of study questions that could be the basis of useful Snowmass projects. We accompany this with links to references and resources on $e^+e^-$ physics, and a description of a new software framework that we are preparing for $e^+e^-$ studies at Snowmass.
This paper presents a combined analysis of the potential of a future electron-positron collider to constrain the Higgs, top and electro-weak (EW) sectors of the Standard Model Effective Field Theory (SMEFT). The leading contributions of operators involving top quarks arise mostly at one-loop suppressed order and can be captured by the renormalization group mixing with Higgs operators. We perform global fits with an extended basis of 29 parameters, including both Higgs and top operators, to the projections for the Higgs, top and electro-weak precision measurements at the International Linear Collider (ILC). The determination of the Higgs boson couplings in the 250 GeV stage of the ILC is initially severely degraded by the additional top-quark degrees of freedom, but can be nearly completely recovered by the inclusion of precise measurements of top-quark EW couplings at the LHC. The physical Higgs couplings are relatively robust, as the top mass is larger than the energy scale of EW processes. The effect of the top operators on the bounds on the Wilson coefficients is much more pronounced and may limit our ability to identify the source of deviations from the Standard Model. Robust global bounds on all Wilson coefficients are only obtained when the 500 GeV stage of the ILC is included.
We study the $h γZ$ coupling, which is a loop induced coupling in the Standard Model (SM), to probe new physics. In a global fit based on the SM Effective Field Theory, measurement of the SM $h γZ$ coupling can provide a very useful constraint, in particular for the precise determination of $hZZ$ and $hWW$ couplings. At the International Linear Collider (ILC), there are two direct ways to study the $h γZ$ coupling: one is to measure the branching ratio of the $h \to γZ$ decay and the other to measure the cross section for the $e^+e^- \to h γ$ process. We have performed a full simulation study of the $e^+e^- \to h γ$ process at the 250 GeV ILC, assuming 2 ab$^{-1}$ data collected by the International Large Detector (ILD). The expected 1$σ$ bound on the effective $hγZ$ coupling ($ζ_{AZ}$) combining measurements of the cross section for $e^+e^- \to h γ$ followed by $h \to b \bar{b}$ and the $h \to γZ$ branching ratio is $-0.0015<ζ_{AZ}<0.0015$. The expected significance for the signal cross section in the fully hadronic $h \to WW^*$ channel is 0.09 $σ$ for beam polarizations of $P(e^-,e^+)=(-80\%,+30\%)$.
The observation of Higgs pair production at high-energy colliders can give evidence for the presence of a triple Higgs coupling. However, the actual determination of the value of this coupling is more difficult. In the context of general models for new physics, double Higgs production processes can receive contributions from many possible beyond-Standard-Model effects. This dependence must be understood if one is to make a definite statement about the deviation of the Higgs field potential from the Standard Model. In this paper, we study the extraction of the triple Higgs coupling from the process $e^+e^-\to Zhh$. We show that, by combining the measurement of this process with other measurements available at a 500 GeV $e^+e^-$ collider, it is possible to quote model-independent limits on the Effective Field Theory parameter c6 that parametrizes modifications of the Higgs potential. We present precise error estimates based on the anticipated ILC physics program, studied with full simulation. Our analysis also gives new insight into the model-independent extraction of the Higgs boson coupling constants and total width from $e^+e^-$ data.
We present an overview of the capabilities that the International Linear Collider (ILC) offers for precision measurements that probe the Standard Model. First, we discuss the improvements that the ILC will make in precision electroweak observables, both from W boson production and radiative return to the Z at 250 GeV in the center of mass and from a dedicated GigaZ stage of running at the Z pole. We then present new results on precision measurements of fermion pair production, including the production of b and t quarks. We update the ILC projections for the determination of Higgs boson couplings through a Standard Model Effective Field Theory fit taking into account the new information on precision electroweak constraints. Finally, we review the capabilities of the ILC to measure the Higgs boson self-coupling.
The International Linear Collider (ILC) is now under consideration as the next global project in particle physics. In this report, we review of all aspects of the ILC program: the physics motivation, the accelerator design, the run plan, the proposed detectors, the experimental measurements on the Higgs boson, the top quark, the couplings of the W and Z bosons, and searches for new particles. We review the important role that polarized beams play in the ILC program. The first stage of the ILC is planned to be a Higgs factory at 250 GeV in the centre of mass. Energy upgrades can naturally be implemented based on the concept of a linear collider. We discuss in detail the ILC program of Higgs boson measurements and the expected precision in the determination of Higgs couplings. We compare the ILC capabilities to those of the HL-LHC and to those of other proposed e+e- Higgs factories. We emphasize throughout that the readiness of the accelerator and the estimates of ILC performance are based on detailed simulations backed by extensive RandD and, for the accelerator technology, operational experience.
We study the $e^+e^-\to h γ$ process at the International Linear Collider (ILC) to probe new physics in the $hγZ$ coupling. The study is performed at a center of mass energy of 250 GeV and is based on the full simulation of the International Large Detector (ILD). The expected signal significance is found to be 0.53 $σ$ for an integrated luminosity of 2000 fb$^{-1}$ in the case of the standard model. The corresponding 95 $\%$ confidence level upper limit for the signal cross section is 1.08 fb for left-handed beam polarization.
A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal to and complements the LHC physics program. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. Polarised electron and positron beams add unique opportunities to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The key accelerator technology, superconducting radio-frequency cavities, has matured. Optimised collider and detector designs, and associated physics analyses, were presented in the ILC Technical Design Report, signed by 2400 scientists. There is a strong interest in Japan to host this international effort. A detailed review of the many aspects of the project is nearing a conclusion in Japan. Now the Japanese government is preparing for a decision on the next phase of international negotiations, that could lead to a project start within a few years. The potential timeline of the ILC project includes an initial phase of about 4 years to obtain international agreements, complete engineering design and prepare construction, and form the requisite international collaboration, followed by a construction phase of 9 years.
The International Linear Collider is now proposed with a staged machine design, with the first stage at 250 GeV with a luminosity goal of 2 ab-1. In this paper, we review the physics expectations for this machine. These include precision measurements of Higgs boson couplings, searches for exotic Higgs decays, other searches for particles that decay with zero or small visible energy, and measurements of e+e- annihilation to W+W- and 2-fermion states with improved sensitivity. A summary table gives projections for the achievable levels of precision based on the latest full simulation studies.
Future e+e- colliders give the promise of model-independent determinations of the couplings of the Higgs boson. In this paper, we present an improved formalism for extracting Higgs boson couplings from e+e- data, based on the Effective Field Theory description of corrections to the Standard Model. We apply this formalism to give projections of Higgs coupling accuracies for stages of the International Linear Collider and for other proposed e+e- colliders.
The International Linear Collider is now proposed with a staged machine design, with the first stage at $\sqrt{s}=$~250 GeV and an integrated luminosity goal of 2~ab$^{-1}$. One of the questions for the machine design is the importance of positron polarization. In this report, we review the impact of positron polarization on the physics goals of the $250$ GeV stage of the ILC and demonstrate that positron polarization has distinct advantages.
This presentation gives the prospects of measuring the general Lorentz structures of $VVH$ ($V=Z$, $γ$ and $W$) couplings at the International Linear Collider (ILC). Sensitivities to Higgs CP-even and CP-odd structures are evaluated by using various Higgs production channels and employing measurements of kinematical distributions. The evaluation is performed based on full detector simulation of the International Large Detector (ILD) at center-of-mass energies $\sqrt{s}=$ 250 and 500 GeV. Combined sensitivities on the anomalous $ZZH$ couplings are provided for a realistic operating scenario of the ILC.
This document is the final report by the Committee on the Scientific Case of the ILC Operating at 250 GeV as a Higgs Factory. This committee was commissioned by the Japan Association of High Energy Physicists. The purpose of this committee is to investigate and compare the capability to determine the energy scale of new phenomena and new principles and the capability to uncover the origin of matter-antimatter asymmetry.
This paper addresses the question of whether the International Linear Collider has the capability of discovering new particles that have not already been discovered at the CERN Large Hadron Collider. We summarize the various paths to discovery offered by the ILC, and discuss them in the context of three different scenarios: 1. LHC does not discover any new particles, 2. LHC discovers some new low mass states and 3. LHC discovers new heavy particles. We will show that in each case, ILC plays a critical role in discovery of new phenomena and in pushing forward the frontiers of high-energy physics as well as our understanding of the universe in a manner which is highly complementary to that of LHC. For the busy reader, a two-page executive summary is provided at the beginning of the document.
In this paper we study the direct production of the diphoton resonance $X$ which has been suggested by 2015 data at the LHC, in $e^+e^-\to Xγ/XZ$ processes at the ILC. We derive an analytic expression for the scattering amplitudes of these processes, and present a comprehensive analysis for determining the properties of $X$ at the ILC. A realistic simulation study for $e^+e^-\to Xγ$ is performed based on the full detector simulation to demonstrate the capabilities of the ILC experiment. Complementary to the searches at the LHC, prospects of the measurement of the absolute values of production cross-section are obtained for the ILC using recoil technique without assuming decay modes of $X$. In addition, we have studied the searches for $X\to\rm{invisible}$ and $X\to b\bar{b}$ modes, which are challenging at the LHC, and found that these decay modes can be discovered with high significance if their branching ratios are large enough.
If the gamma-gamma resonance at 750 GeV suggested by 2015 LHC data turns out to be a real effect, what are the implications for the physics case and upgrade path of the International Linear Collider? Whether or not the resonance is confirmed, this question provides an interesting case study testing the robustness of the ILC physics case. In this note, we address this question with two points: (1) Almost all models proposed for the new 750 GeV particle require additional new particles with electroweak couplings. The key elements of the 500 GeV ILC physics program---precision measurements of the Higgs boson, the top quark, and 4-fermion interactions---will powerfully discriminate among these models. This information will be important in conjunction with new LHC data, or alone, if the new particles accompanying the 750 GeV resonance are beyond the mass reach of the LHC. (2) Over a longer term, the energy upgrade of the ILC to 1 TeV already discussed in the ILC TDR will enable experiments in gamma-gamma and e+e- collisions to directly produce and study the 750 GeV particle from these unique initial states.
For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a 6 GeV electron beam at the DESY II synchrotron. The efficiency for reconstructing hits, the measurement of the drift velocity, the space point resolution and the control of field inhomogeneities are presented.
This article is based on the talk presented at the International Workshop on Future Linear Colliders (LCWS13) which held during November 11-15, 2013 at Tokyo, Japan. We present several analyses related to the Higgs total width study at ILC based on the full detector simulation of ILD, which are \eevvH followed by \Htobb and \HtoWW. The studies show that at $\unit{250}{GeV}$ we can determine the Higgs total width with a relative precision of 11% and the $HWW$ coupling with 4.8%, whereas at $\unit{500}{GeV}$ the expected precision can be significantly improved to 5% and 1.2% respectively, assuming the baseline integrated luminosities of ILC, which are $\unit{250}{fb^{-1}}$ @ $\unit{250}{GeV}$, $\unit{500}{fb^{-1}}$ @ $\unit{500}{GeV}$, and a beam polarization of $P(e^{-},e^{+})=(-80%,+30%)$. A new approach of removing pile-up particles based on multivariate method developed during those analyses is also presented.