arXiv subjects

Junyu Wu

Publications and source records attributed to Junyu Wu.

10 recordsLinked to original sources

arXiv2026

Reinforcement Learning-Guided Evolutionary Policy Optimization for Preference-Adjustable Heterogeneous Agile Earth Observation Satellite Scheduling

Heterogeneous agile Earth observation satellite (AEOS) scheduling requires task selection, satellite assignment, and observation sequencing under satellite-dependent visibility windows, attitude maneuvering requirements, energy consumption, and onboard storage constraints. Since satellites differ in orbital access, maneuvering capability, and payload resources, the same task may have different feasible windows, transition costs, and resource-consumption patterns on different platforms, which increases the difficulty of unified modeling and efficient optimization. To address this problem, this paper proposes an evolutionary policy optimization framework for heterogeneous AEOS scheduling with preference-adjustable weighted objectives. In the modeling layer, assignment-based indirect encoding is combined with decoder-based equivalent-cost evaluation to retain satellite-dependent constraints while integrating task gain, energy saving, and load balance into an interpretable scalar utility. In the optimization layer, schedule decoding, population-based search, and online actor-critic operator control are decoupled, so that reinforcement learning selects high-level search operators rather than constructing schedules directly. Based on this framework, a reinforcement-learning-assisted operator-selection memetic evolutionary algorithm (RLOSMEA) is developed to coordinate global exploration, feasibility recovery, and local refinement under a limited function-evaluation budget. Experiments on different heterogeneous AEOS scenarios show that RLOSMEA achieves higher overall weighted utility and more stable convergence than representative metaheuristic baselines. Sensitivity and learning-behavior analyses further confirm the robustness of the proposed method and the effectiveness of reinforcement-learning-guided operator selection.

cs.AI↗

arXiv2026

Implicit Q-learning-bootstrapped ant colony optimization for maritime moving-target observation scheduling with agile satellites

Maritime moving-target observation scheduling with agile Earth observation satellites is a dynamic, sequence-dependent combinatorial optimization problem. Sea-surface targets move continuously, causing feasible observation windows to vary with target motion and satellite orbital geometry. The scheduler must jointly determine task selection, satellite assignment, observation-window selection, and observation ordering under time-window, attitude-maneuvering, onboard-resource, and cloud-affected availability constraints. This paper proposes an implicit Q-learning-bootstrapped ant colony optimization method, termed IQACO, for multi-satellite maritime moving-target observation scheduling. Rather than directly learning a task-selection policy, IQACO embeds an offline implicit Q-learning module into constructive ant colony optimization to adaptively adjust the pheromone factor, heuristic factor, and evaporation rate. A compact search-state representation captures pheromone distribution, current and historical-best solution quality, and iteration progress. During online scheduling, ant colony optimization constructs feasible observation sequences, while the learned policy regulates exploration and exploitation according to the current search state. Experiments on 14 scenarios with different scales and satellite configurations show that IQACO obtains the highest mean observation benefit in every scenario, improves the result of conventional ant colony optimization by 3.40\%--9.40\%, accelerates convergence, and remains stable under different objective-weight settings. These results demonstrate that offline value learning provides an effective adaptive search-control mechanism for constrained maritime moving-target observation scheduling.

cs.AI↗

arXiv2026

verdi: retrieval is not transfer for continual world model optimization

Foundation world models have made remarkable progress in planning, simulation, and embodied intelligence. However, optimizing a pretrained world model toward a user-specified objective remains difficult: each campaign typically rediscovers optimization strategies from scratch, and the resulting knowledge rarely transfers to the next model. Existing research agents automate the optimization loop but treat successful strategies as directly reusable recipes, without principled safeguards for when transfer is appropriate. We argue instead that retrieval is not transfer: a strategy validated on one model is at best an optimization hypothesis for another, and becomes transferable knowledge only after target-side experimental valida- tion. Guided by this principle, we propose VERDI , a continual framework for evidence-licensed world model optimization. VERDI characterizes each world model through shared inference-time probes to construct an Optimization Fin- gerprint, retrieves relevant prior experience as ranked hypotheses, and validates every candidate under a frozen target-side verifier before admitting it as reusable evidence; contradictions among nearby fingerprints further trigger probe evolution, continually refining the diagnostic representation itself. Experiments on Ctrl-World, the Cosmos family, and RoboCoin show that VERDI reduces search cost by 68%, GPU cost by 69%, and negative transfer from 0.34 to 0.06, while predicting transfer outcomes with 83% sign accuracy.

cs.AI↗

arXiv2026

Phase Behavior of Unilamellar Hybrid Lipid-Diblock Copolymer Membranes

Hybrid lipid block copolymer membranes are promising for many applications in drug delivery, single molecule detection, in-membrane protein folding, and synthetic cells. However, rational design is difficult due to the many design parameters which determine the nano- and micron-scale morphology and properties. In this work, we propose a physically-informed framework which incorporates chemical immiscibility, hydrophobic thickness mismatch and geometric constraints to predict the morphology of hybrid membranes. For this purpose, we extend existing theory for amphiphilic monolayers to model the thickness of diblock copolymer bilayers, demonstrating that both the hydrophobic and hydrophilic block lengths determine the thickness. We identify and rationalize the four primary membrane morphologies observed: mixed, laterally phase-separated, unzipped (thick-thin coexistence), and polymer-rich. Specifically, chemical immiscibility differentiates mixed membranes from laterally phase separated membranes, and hydrophobic mismatch drives transitions to unzipped or polymer-rich morphologies. Areal density, finally, determines the crossover between unzipped and polymer-rich states. We validate our theoretical predictions using coarse-grained molecular dynamics across a broad parameter space, including multiple lipid species (DOPC, DPPC), polymer species (1,4 PBD-b-PEO, 1,2 PBD-b-PEO, PE-b-PEO), block lengths, temperatures, and compositions. The resulting phase maps unify previously reported experimental and simulation observations and enable a generic and mechanistic understanding for the effect of system parameters on the nanoscale morphology.

cond-mat.soft↗

arXiv2025

Towards Practical Real-Time Low-Latency Music Source Separation

In recent years, significant progress has been made in the field of deep learning for music demixing. However, there has been limited attention on real-time, low-latency music demixing, which holds potential for various applications, such as hearing aids, audio stream remixing, and live performances. Additionally, a notable tendency has emerged towards the development of larger models, limiting their applicability in certain scenarios. In this paper, we introduce a lightweight real-time low-latency model called Real-Time Single-Path TFC-TDF UNET (RT-STT), which is based on the Dual-Path TFC-TDF UNET (DTTNet). In RT-STT, we propose a feature fusion technique based on channel expansion. We also demonstrate the superiority of single-path modeling over dual-path modeling in real-time models. Moreover, we investigate the method of quantization to further reduce inference time. RT-STT exhibits superior performance with significantly fewer parameters and shorter inference times compared to state-of-the-art models.

cs.SD↗

arXiv2025

Pure-Pass: Fine-Grained, Adaptive Masking for Dynamic Token-Mixing Routing in Lightweight Image Super-Resolution

Image Super-Resolution (SR) aims to reconstruct high-resolution images from low-resolution counterparts, but the computational complexity of deep learning-based methods often hinders practical deployment. CAMixer is the pioneering work to integrate the advantages of existing lightweight SR methods and proposes a content-aware mixer to route token mixers of varied complexities according to the difficulty of content recovery. However, several limitations remain, such as poor adaptability, coarse-grained masking and spatial inflexibility, among others. We propose Pure-Pass (PP), a pixel-level masking mechanism that identifies pure pixels and exempts them from expensive computations. PP utilizes fixed color center points to classify pixels into distinct categories, enabling fine-grained, spatially flexible masking while maintaining adaptive flexibility. Integrated into the state-of-the-art ATD-light model, PP-ATD-light achieves superior SR performance with minimal overhead, outperforming CAMixer-ATD-light in reconstruction quality and parameter efficiency when saving a similar amount of computation.

cs.CV↗

arXiv2025

WeChat-YATT: A Scalable, Simple, Efficient, and Production Ready Training Library

Reinforcement Learning from Human Feedback (RLHF) has emerged as a prominent paradigm for training large language models and multimodal systems. Despite the notable advances enabled by existing RLHF training frameworks, significant challenges remain to scale to complex multimodal workflows and adapt to dynamic workloads. In particular, current systems often encounter limitations related to controller scalability when managing large models, as well as inefficiencies in orchestrating intricate RLHF pipelines, especially in scenarios that require dynamic sampling and resource allocation. In this paper, we introduce WeChat-YATT Yet Another Transformer Trainer in WeChat, a simple, scalable, and balanced RLHF training framework specifically designed to address these challenges. WeChat-YATT features a parallel controller programming model that enables flexible and efficient orchestration of complex RLHF workflows, effectively mitigating bottlenecks associated with centralized controller architectures and facilitating scalability in large-scale data scenarios. In addition, we propose a dynamic placement schema that adaptively partitions computational resources and schedules workloads, thereby significantly reducing hardware idle time and improving GPU utilization under variable training conditions. We evaluate WeChat-YATT across diverse experimental scenarios, demonstrating its substantial throughput improvements over state-of-the-art RLHF training frameworks. Furthermore, WeChat-YATT has been successfully deployed to train models that support WeChat product features for a large-scale user base, underscoring its effectiveness and robustness in real-world applications. We have made WeChat-YATT publicly available at https://www.github.com/tencent/WeChat-YATT.

cs.LG↗

arXiv2025

G-Core: A Simple, Scalable and Balanced RLHF Trainer

Reinforcement Learning from Human Feedback (RLHF) has become an increasingly popular paradigm for training large language models (LLMs) and diffusion models. While existing RLHF training systems have enabled significant progress, they often face challenges in scaling to multi-modal and diffusion workflows and adapting to dynamic workloads. In particular, current approaches may encounter limitations in controller scalability, flexible resource placement, and efficient orchestration when handling complex RLHF pipelines, especially in scenarios involving dynamic sampling or generative reward modeling. In this paper, we present \textbf{G-Core}, a simple, scalable, and balanced RLHF training framework designed to address these challenges. G-Core introduces a parallel controller programming model, enabling flexible and efficient orchestration of complex RLHF workflows without the bottlenecks of a single centralized controller. Furthermore, we propose a dynamic placement schema that adaptively partitions resources and schedules workloads, significantly reducing hardware idle time and improving utilization, even under highly variable training conditions. G-Core has successfully trained models that support WeChat product features serving a large-scale user base, demonstrating its effectiveness and robustness in real-world scenarios. Our results show that G-Core advances the state of the art in RLHF training, providing a solid foundation for future research and deployment of large-scale, human-aligned models.

cs.LG↗

arXiv2016

Deep Joint Face Hallucination and Recognition

Deep models have achieved impressive performance for face hallucination tasks. However, we observe that directly feeding the hallucinated facial images into recog- nition models can even degrade the recognition performance despite the much better visualization quality. In this paper, we address this problem by jointly learning a deep model for two tasks, i.e. face hallucination and recognition. In particular, we design an end-to-end deep convolution network with hallucination sub-network cascaded by recognition sub-network. The recognition sub- network are responsible for producing discriminative feature representations using the hallucinated images as inputs generated by hallucination sub-network. During training, we feed LR facial images into the network and optimize the parameters by minimizing two loss items, i.e. 1) face hallucination loss measured by the pixel wise difference between the ground truth HR images and network-generated images; and 2) verification loss which is measured by the classification error and intra-class distance. We extensively evaluate our method on LFW and YTF datasets. The experimental results show that our method can achieve recognition accuracy 97.95% on 4x down-sampled LFW testing set, outperforming the accuracy 96.35% of conventional face recognition model. And on the more challenging YTF dataset, we achieve recognition accuracy 90.65%, a margin over the recognition accuracy 89.45% obtained by conventional face recognition model on the 4x down-sampled version.

cs.CV↗

arXiv2016

Automatically Building Face Datasets of New Domains from Weakly Labeled Data with Pretrained Models

Training data are critical in face recognition systems. However, labeling a large scale face data for a particular domain is very tedious. In this paper, we propose a method to automatically and incrementally construct datasets from massive weakly labeled data of the target domain which are readily available on the Internet under the help of a pretrained face model. More specifically, given a large scale weakly labeled dataset in which each face image is associated with a label, i.e. the name of an identity, we create a graph for each identity with edges linking matched faces verified by the existing model under a tight threshold. Then we use the maximal subgraph as the cleaned data for that identity. With the cleaned dataset, we update the existing face model and use the new model to filter the original dataset to get a larger cleaned dataset. We collect a large weakly labeled dataset containing 530,560 Asian face images of 7,962 identities from the Internet, which will be published for the study of face recognition. By running the filtering process, we obtain a cleaned datasets (99.7+% purity) of size 223,767 (recall 70.9%). On our testing dataset of Asian faces, the model trained by the cleaned dataset achieves recognition rate 93.1%, which obviously outperforms the model trained by the public dataset CASIA whose recognition rate is 85.9%.

cs.CV↗