Searcharxiv⌕ Search

arXiv subjects

Justin Stevens

Publications and source records attributed to Justin Stevens.

12 recordsLinked to original sources

Solving Witness Triangle Puzzles Faster with an Automatically Learned Predicate

The Witness is a game with combinatorial puzzles that are challenging for both human players and AI solvers. Search-based AI solvers can require large amounts of time to solve such puzzles. We accelerate search by automatically learning a predicate that predicts whether a partial path to a Witness puzzle is completable to a solution path. We demonstrate that our learned predicate is human-explainable, which makes it amenable to proofs, and we prove a key property that allows us to use it for pruning successor states in search. Doing so accelerates search by about six times while maintaining search completeness. Conversely, given a fixed time budget per puzzle, our predicate-accelerated search can solve more puzzles of larger sizes than a baseline search using a hand-coded predicate. Finally, we empirically demonstrate how accelerating search using an automatically learned predicate can outperform two competitors, weighted A* and Levin tree search with neural networks, in terms of time and number of nodes expanded.

cs.AI↗

The Maximum Number of Sets for 16 Cards is 26

In SET, each card has four properties with three values each, and three cards form a \emph{set} when every property is all the same or all different. We prove that the maximum number of sets among $13$, $14$, $15$, and $16$ cards is $16$, $19$, $23$, and $26$, respectively. Viewing cards as points of $\mathbb{F}_3^4$ and sets as lines, we show that a configuration that leaves one of the $40$ line directions of $\mathbb{F}_3^4$ unused projects into $\mathbb{F}_3^3$ without losing a set, which reduces the problem to three properties, where exhaustive search is feasible. We force an unused direction by counting repeated directions in the planes through a card on many sets, and treat configurations containing a magic square separately.

math.GM↗

The Maximum Number of Sets for 12 Cards is 14

We analyze a mathematical property of the popular card game SET. We present a revised geometric and computer-assisted proof that the maximum number of sets for 12 cards is 14 using finite field geometry, combinatorics, and graph theory. We present several computer algorithms for finding or approximating the maximum number of sets. We show a complete computer proof that iterates over all possible board configurations. We use this method to compute the maximum number of sets with 4 properties for a small number of cards, but it is generally too inefficient. With this method, we compute the maximum number of sets for 3 properties for all possible numbers of cards. Finally, we compare this to an existing approximation algorithm for finding maximal sets.

math.CO↗

Application of a Mixture of Experts-based Foundation Model to the GlueX DIRC Detector

We present a Mixture-of-Experts-based foundation model applied to the GlueX DIRC detector at Jefferson Lab, demonstrating its utility as a unified framework for fast simulation, particle identification, and hit-level noise filtering of Cherenkov photons. By leveraging a single shared transformer backbone across all tasks, the approach eliminates the fragmentation of task-specific pipelines while maintaining competitive-and in several cases superior-performance relative to established methods. The model operates directly on low-level detector inputs, performing hit-by-hit autoregressive generation over split spatial and temporal vocabularies with continuous kinematic conditioning, and supports class-conditional generation of pions and kaons through its Mixture-of-Experts architecture. We benchmark against the standard geometrical reconstruction and prior deep learning methods across the full kinematic phase space of the GlueX DIRC, demonstrating that the foundation model framework transfers effectively to this detector without architectural modification. This work positions the foundation model as a practical and scalable alternative to the suite of task-specific models currently proposed for GlueX DIRC analysis.

physics.data-an↗

Deep(er) Reconstruction of Imaging Cherenkov Detectors with Swin Transformers and Normalizing Flow Models

Imaging Cherenkov detectors are crucial for particle identification (PID) in nuclear and particle physics experiments. Fast reconstruction algorithms are essential for near real-time alignment, calibration, data quality control, and efficient analysis. At the future Electron-Ion Collider (EIC), the ePIC detector will feature a dual Ring Imaging Cherenkov (dual-RICH) detector in the hadron direction, a Detector of Internally Reflected Cherenkov (DIRC) in the barrel, and a proximity focus RICH in the electron direction. This paper focuses on the DIRC detector, which presents complex hit patterns and is also used for PID of pions and kaons in the GlueX experiment at JLab. We present Deep(er)RICH, an extension of the seminal DeepRICH work, offering improved and faster PID compared to traditional methods and, for the first time, fast and accurate simulation. This advancement addresses a major bottleneck in Cherenkov detector simulations involving photon tracking through complex optical elements. Our results leverage advancements in Vision Transformers, specifically hierarchical Swin Transformer and normalizing flows. These methods enable direct learning from real data and the reconstruction of complex topologies. We conclude by discussing the implications and future extensions of this work, which can offer capabilities for PID for multiple cutting-edge experiments like the future EIC.

physics.ins-det↗

Hadron Spectroscopy in Photoproduction

Recent decades have seen a resurge of interest in hadron spectroscopy, driven by new, high-luminosity experiments which have identified many new hadrons, both expected and unexpected. The large number of unexpected hadrons suggest contributions from additional quark and gluonic degrees of freedom to the hadronic spectrum beyond the basic quark model. Photoproduction has emerged as an attractive process to study hadron spectroscopy, due to the range of states accessible in new and planned experimental facilities, complimentary kinematics to other experiments where rescattering effects near thresholds are reduced, and advances in our theoretical understanding of these reactions. This white paper reviews the prospects for hadron spectroscopy from three major existing and proposed facilities: the current GlueX experiment, the planned Electron-Ion Collider, and a proposed JLab 24 GeV upgrade.

hep-ex↗

Strange Hadron Spectroscopy with Secondary KL Beam in Hall D

We propose to create a secondary beam of neutral kaons in Hall D at Jefferson Lab to be used with the GlueX experimental setup for strange hadron spectroscopy. The superior CEBAF electron beam will enable a flux on the order of $1\times 10^4~K_L/sec$, which exceeds the flux of that previously attained at SLAC by three orders of magnitude. The use of a deuteron target will provide first measurements ever with neutral kaons on neutrons. The experiment will measure both differential cross sections and self-analyzed polarizations of the produced $Λ$, $Σ$, $Ξ$, and $Ω$ hyperons using the GlueX detector at the Jefferson Lab Hall D. The measurements will span CM $\cosθ$ from $-0.95$ to 0.95 in the range W = 1490 MeV to 2500 MeV. The new data will significantly constrain the partial wave analyses and reduce model-dependent uncertainties in the extraction of the properties and pole positions of the strange hyperon resonances, and establish the orbitally excited multiplets in the spectra of the $Ξ$ and $Ω$ hyperons. Comparison with the corresponding multiplets in the spectra of the charm and bottom hyperons will provide insight into he accuracy of QCD-based calculations over a large range of masses. The proposed facility will have a defining impact in the strange meson sector through measurements of the final state $Kπ$ system up to 2 GeV invariant mass. This will allow the determination of pole positions and widths of all relevant $K^\ast(Kπ)$ $S$-,$P$-,$D$-,$F$-, and $G$-wave resonances, settle the question of the existence or nonexistence of scalar meson $κ/K_0^\ast(700)$ and improve the constrains on their pole parameters. Subsequently improving our knowledge of the low-lying scalar nonet in general.

nucl-ex↗

Construction and Performance of the Barrel Electromagnetic Calorimeter for the GlueX Experiment

The barrel calorimeter is part of the new spectrometer installed in Hall D at Jefferson Lab for the GlueX experiment. The calorimeter was installed in 2013, commissioned in 2014 and has been operating routinely since early 2015. The detector configuration, associated Monte Carlo simulations, calibration and operational performance are described herein. The calorimeter records the time and energy deposited by charged and neutral particles created by a multi-GeV photon beam. It is constructed as a lead and scintillating-fiber calorimeter and read out with 3840 large-area silicon photomultiplier arrays. Particles impinge on the detector over a wide range of angles, from normal incidence at 90 degrees down to 11.5 degrees, which defines a geometry that is fairly unique among calorimeters. The response of the calorimeter has been measured during a running experiment and performs as expected for electromagnetic showers below 2.5 GeV. We characterize the performance of the BCAL using the energy resolution integrated over typical angular distributions for $π^0$ and $η$ production of $σ_E/E$=5.2\%/$\sqrt{E(\rm{GeV})} \oplus$ 3.6\% and a timing resolution of $σ$\,=\,150\,ps at 1\,GeV.

physics.ins-det↗

Detecting a heavy neutrino electric dipole moment at the LHC

The milliQan Collaboration has proposed to search for millicharged particles by looking for very weakly ionizing tracks in a detector installed in a cavern near the CMS experiment at the LHC. We note that another form of exotica can also yield weakly ionizing tracks. If a heavy neutrino has an electric dipole moment (EDM), then the milliQan experiment may be sensitive to it as well. In particular, writing the general dimension-5 operator for an EDM with a scale of a TeV and a one-loop factor, one finds a potential EDM as high as a few times $10^{-17}$ e-cm, and models exist where it is an order of magnitude higher. Redoing the Bethe calculation of ionization energy loss for an EDM, it is found that the milliQan detector is sensitive to EDMs as small as $10^{-17}$ e-cm. Using the production cross-section and analyzing the acceptance of the milliQan detector, we find the expected $95\%$ exclusion and $3σ$ sensitivity over the range of neutrino masses from $5-1000$ GeV for integrated luminosities of $300$ and $3000\ {\rm fb}^{-1}$ at the LHC.

hep-ph↗

The GlueX DIRC Project

The GlueX experiment was designed to search for and study the pattern of gluonic excitations in the meson spectrum produced through photoproduction reactions at a new tagged photon beam facility in Hall D at Jefferson Laboratory. The particle identification capabilities of the GlueX experiment will be enhanced by constructing a DIRC (Detection of Internally Reflected Cherenkov light) detector, utilizing components of the decommissioned BaBar DIRC. The DIRC will allow systematic studies of kaon final states that are essential for inferring the quark flavor content of both hybrid and conventional mesons. The design for the GlueX DIRC is presented, including the new expansion volumes that are currently under development.

physics.ins-det↗

Model selection for amplitude analysis

Model complexity in amplitude analyses is often a priori under-constrained since the underlying theory permits a large number of possible amplitudes to contribute to most physical processes. The use of an overly complex model results in reduced predictive power and worse resolution on unknown parameters of interest. Therefore, it is common to reduce the complexity by removing from consideration some subset of the allowed amplitudes. This paper studies a method for limiting model complexity from the data sample itself through regularization during regression in the context of a multivariate (Dalitz-plot) analysis. The regularization technique applied greatly improves the performance. An outline of how to obtain the significance of a resonance in a multivariate amplitude analysis is also provided.

physics.data-an↗

uBoost: A boosting method for producing uniform selection efficiencies from multivariate classifiers

The use of multivariate classifiers, especially neural networks and decision trees, has become commonplace in particle physics. Typically, a series of classifiers is trained rather than just one to enhance the performance; this is known as boosting. This paper presents a novel method of boosting that produces a uniform selection efficiency in a user-defined multivariate space. Such a technique is ideally suited for amplitude analyses or other situations where optimizing a single integrated figure of merit is not what is desired.

nucl-ex↗