arXiv subjects

Jutta Rogal

Publications and source records attributed to Jutta Rogal.

44 records · Page 3Linked to original sources

arXiv2012

Diffusion of hydrogen within idealised grains of bcc-Fe: A kinetic Monte Carlo study

Structural defects in materials such as vacancies, grain boundaries, and dislocations may trap hydrogen and a local accumulation of hydrogen at these defects can lead to the degradation of the materials properties. An important aspect in obtaining insight into hydrogen induced embrittlement on the atomistic level is to understand the diffusion of hydrogen in these materials. In our study we employ kinetic Monte Carlo (kMC) simulations to investigate hydrogen diffusion in bcc iron within different microstructures. All input data to the kMC model, such as available sites, solution energies, and diffusion barriers are obtained from first-principles calculations. We find that hydrogen mainly diffuses within the interface region with an overall diffusivity that is lower than in pure bcc-Fe bulk. The concentration dependence of the diffusion coefficient is strongly non-linear and the diffusion coefficient may even decrease with increasing hydrogen concentration. To describe the macroscopic diffusion coefficient we derive an analytic expression as a function of hydrogen concentration and temperature which is in excellent agreement with our numerical results for idealised microstructures.

cond-mat.mtrl-sci↗

arXiv2008

CO oxidation on Pd(100) at technologically relevant pressure conditions: A first-principles kinetic Monte Carlo study

The possible importance of oxide formation for the catalytic activity of transition metals in heterogenous oxidation catalysis has evoked a lively discussion over the recent years. On the more noble transition metals (like Pd, Pt or Ag) the low stability of the common bulk oxides suggests primarily sub-nanometer thin oxide films, so-called surface oxides, as potential candidates that may be stabilized under gas phase conditions representative of technological oxidation catalysis. We address this issue for the Pd(100) model catalyst surface with first-principles kinetic Monte Carlo (kMC) simulations that assess the stability of the well-characterized (sqrt{5} x sqrt{5})R27 surface oxide during steady-state CO oxidation. Our results show that at ambient pressure conditions the surface oxide is stabilized at the surface up to CO:O2 partial pressure ratios just around the catalytically most relevant stoichiometric feeds (p(CO):p(O2) = 2:1). The precise value depends sensitively on temperature, so that both local pressure and temperature fluctuations may induce a continuous formation and decomposition of oxidic phases during steady-state operation under ambient stoichiometric conditions.

cond-mat.mtrl-sci↗

arXiv2007

Effect of surface nanostructure on temperature programmed reaction spectroscopy: First-principles kinetic Monte Carlo simulations of CO oxidation at RuO2(110)

Using the catalytic CO oxidation at RuO2(110) as a showcase, we employ first-principles kinetic Monte Carlo simulations to illustrate the intricate effects on temperature programmed reaction spectroscopy data brought about by the mere correlations between the locations of the active sites at a nanostructured surface. Even in the absence of lateral interactions, this nanostructure alone can cause inhomogeneities that cannot be grasped by prevalent mean-field data analysis procedures, which thus lead to wrong conclusions on the reactivity of the different surface species.

cond-mat.mtrl-sci↗

arXiv2007

CO oxidation at Pd(100): A first-principles constrained thermodynamics study

The possible formation of oxides or thin oxide films (surface oxides) on late transition metal surfaces is recently being recognized as an essential ingredient when aiming to understand catalytic oxidation reactions under technologically relevant gas phase conditions. Using the CO oxidation at Pd(100) as example, we investigate the composition and structure of this model catalyst surface over a wide range of (T,p)-conditions within a multiscale modeling approach where density-functional theory is linked to thermodynamics. The results show that under the catalytically most relevant gas phase conditions a thin surface oxide is the most stable "phase" and that the system is actually very close to a transition between this oxidic state and a reduced state in form of a CO covered Pd(100) surface.

cond-mat.mtrl-sci↗

arXiv2006

First-principles statistical mechanics study of the stability of a sub-nanometer thin surface oxide in reactive environments: CO oxidation at Pd(100)

We employ a multiscale modeling approach to study the surface structure and composition of a Pd(100) model catalyst in reactive environments. Under gas phase conditions representative of technological CO oxidation (~1 atm, 300-600 K) we find the system on the verge of either stabilizing sub-nanometer thin oxide structures or CO adlayers at the surface. Under steady-state operation this suggests the presence or continuous formation and reduction of oxidic patches at the surface, which could be key to understand the observable catalytic function.

cond-mat.mtrl-sci↗

arXiv2006

Density-functional theory investigation of oxygen adsorption at Pd(11N)(N=3,5,7) vicinal surfaces

We present a density-functional theory study addressing the on-surface adsorption of oxygen at the Pd(11N) (N =3,5,7) vicinal surfaces, which exhibit (111) steps and (100) terraces of increasing width. We find the binding to be predominantly governed by the local coordination at the adsorption site. This leads to very similar bonding properties at the threefold step sites of all three vicinal surfaces, while the binding at the central fourfold hollow site in the four atomic row terrace of Pd(117) is already very little disturbed by the presence of the neighboring steps.

cond-mat.mtrl-sci↗

arXiv2005

Comparison of the full-potential and frozen-core approximation approaches to density-functional calculations of surfaces

We scrutinize the accuracy of the pseudopotential approximation in density-functional theory (DFT) calculations of surfaces by systematically comparing to results obtained within a full-potential setup. As model system we choose the CO oxidation at a RuO2(110) surface and focus in particular on the adsorbate binding energies and reaction barriers as target quantities for the comparison. Rather surprisingly, the major reason for discrepancy does not result from the neglected semi-core state relaxation in the frozen-core approximation, but from an inadequate description of the local part of the Ru pseudopotential, responsible for the scattering of f like waves. Tiny, seemingly irrelevant, imprecisions appearing in these properties can have a noticeable influence on the surface energetics. At least for the present example, we obtain excellent agreement between both approaches, if the pseudopotential describes these scattering properties accurately.

cond-mat.mtrl-sci↗

arXiv2003

On the thermodynamic stability of PdO surfaces

As a first step towards understanding the morphology of PdO crystals we performed a systematic full-potential density-functional theory study of all possible 1 x 1 terminations of the low-index surfaces of tetragonal PdO. Applying the concept of first-principles atomistic thermodynamics we analyze the composition, structure and stability of these PdO orientations in equilibrium with an arbitrary oxygen environment. Within the studied subset of 1 x 1 geometries the polar PdO-terminated PdO(100) orientation turns out to be surprisingly stable over the whole range of experimentally accessible gas phase conditions. Setting up a constrained Wulff construction within the compiled data set, this PdO(100)-PdO facet correspondingly dominates the obtained polyhedron by far. The real PdO crystallite shape will however likely be affected by surface reconstructions, which are not covered by the present study.

cond-mat.mtrl-sci↗