SearcharxivSearch

arXiv subjects

K. Adhikari

Publications and source records attributed to K. Adhikari.

10 recordsLinked to original sources

A Bayesian approach to the long-baseline neutrino oscillation sensitivity of DUNE

The sensitivity of the Deep Underground Neutrino Experiment (DUNE) to neutrino oscillation is evaluated using a Bayesian Markov Chain Monte Carlo (MCMC) approach. This analysis uses the same underlying sensitivity inputs as previous DUNE studies [Eur. Phys. J. C 80, 978 (2020)], and therefore does not present updated DUNE sensitivities, but instead explores the additional inferences accessible using a Bayesian approach. We present four-dimensional posterior probability distributions of the oscillation parameters, highlighting the breadth of correlation in the parameter space of interest, especially between $\sin^2 \theta_{23}$ and $\sin^2 \theta_{13}$. We exploit the flexibility of the Bayesian framework to incorporate parameter constraints post hoc and assess the impact of applying a reactor short-baseline $\theta_{13}$ constraint. A significant increase in the sensitivity to the $\theta_{23}$ octant is found when including the constraint. Posterior distributions of derived quantities can be easily constructed from MCMC results. This work presents the first study of DUNE's sensitivity to the Jarlskog invariant, $J$, a quantity that provides a parametrisation-independent measure of charge-parity violation in the leptonic sector.

hep-ex

Operation and performance of ProtoDUNE Dual Phase liquid argon time projection chamber

ProtoDUNE-DP was the largest ever built Liquid Argon Time Projection Chamber (LArTPC) operating in Dual-Phase (DP) mode, with a liquid target and charge read-out placed in the gas. It had an active volume of $6\times6\times6$\,m$^3$ corresponding to an active mass of 300\,t (total LAr mass of 720\,t), constructed at the CERN Neutrino Platform and took data from 2019 to 2020 with cosmic muons. In ProtoDUNE-DP the electric drift field is oriented in the vertical direction, causing the electrons to drift vertically towards the anode at the top. The ionization charge is then extracted into the gaseous argon above the liquid surface, amplified by Townsend avalanches, and collected by the charge readout planes. The detector experienced significant technical problems affecting the long-term operation of the Charge Readout Planes, formed by the Large Electron Multipliers, but other critical segments demonstrated required performance including the delivery of -300 kV to the TPC cathode, verification of replaceable charge read-out electronics, and operation of the photon detection system. ProtoDUNE-DP experience resulted in improved designs of the Vertical Drift LArTPC.

physics.ins-det

Charge readout electronics for the DUNE horizontal drift far detector: design and performance in ProtoDUNE-HD

DUNE (Deep Underground Neutrino Experiment) is a long-baseline neutrino oscillation experiment currently under construction, whose far detectors will be the largest liquid argon time projection chambers ever built. This detector design calls for custom-built cryogenic front-end electronics to meet its performance requirements. This paper describes the charge readout electronics that will be used in the DUNE horizontal drift (HD) far detector and presents performance results using data from the ProtoDUNE-HD detector, a 770 ton liquid argon time projection chamber operated at the CERN Neutrino Platform in 2024 that served as the final prototype of the DUNE HD design.

physics.ins-det

Closed-loop geothermal systems: Modeling and predictions

Geothermal energy is a sustainable baseload source recognized for its ability to provide clean energy on a large scale. Advanced Geothermal Systems (AGS) -- offer promising prototypes -- employ a closed-loop vascular layout that runs deep beneath the Earth's surface. A working fluid (e.g., water or supercritical carbon dioxide (sCO2)) circulates through the vasculature, entering the subsurface at the inlet and exiting at the outlet with an elevated temperature. For designing and performing cost-benefit analysis before deploying large-scale projects and maintaining efficiency while enabling real-time monitoring during the operational phase, modeling offers cost-effective solutions; often, it is the only available option for performance assessment. A knowledge gap exists due to the lack of a fast predictive modeling framework that considers the vascular intricacies, particularly the jumps in the solution fields across the channel. Noting that the channel diameter is considerably smaller in scale compared to the surrounding geological domain, we develop a reduced-order modeling (ROM) framework for closed-loop geothermal systems. This ROM incorporates the jump conditions and provides a quick and accurate prediction of the temperature field, including the outlet temperature, which directly correlates with the power production capacity and thermal draw-down. We demonstrate the predictive capabilities of the framework by establishing the uniqueness of the solutions and reporting representative numerical solutions. The modeling framework and the predictions reported in this paper benefit the closed-loop geothermal community, enabling them to determine the system's performance and optimal capacity.

cs.CE

Effect of temperature-dependent material properties on thermal regulation in microvascular composites

Fiber-reinforced composites (FRC) provide structural systems with unique features that appeal to various civilian and military sectors. Often, one needs to modulate the temperature field to achieve the intended functionalities (e.g., self-healing) in these lightweight structures. Vascular-based active cooling offers one efficient way of thermal regulation in such material systems. However, the thermophysical properties (e.g., thermal conductivity, specific heat capacity) of FRC and their base constituents depend on temperature, and such structures are often subject to a broad spectrum of temperatures. Notably, prior active cooling modeling studies did not account for such temperature dependence. Thus, the primary aim of this paper is to reveal the effect of temperature-dependent material properties -- obtained via material characterization -- on the qualitative and quantitative behaviors of active cooling. By applying mathematical analysis and conducting numerical simulations, we show this dependence does not affect qualitative attributes, such as minimum and maximum principles (in the same spirit as \textsc{Hopf}'s results for elliptic partial differential equations). However, the dependence slightly affects quantitative results, such as the mean surface temperature and thermal efficiency. The import of our study is that it provides a deeper understanding of thermal regulation systems under practical scenarios and can guide researchers and practitioners in perfecting associated designs.

math.NA

Thermal regulation in thin vascular systems: A sensitivity analysis

One of the ways natural and synthetic systems regulate temperature is via circulating fluids through vasculatures embedded within their bodies. Because of the flexibility and availability of proven fabrication techniques, vascular-based thermal regulation is attractive for thin microvascular systems. Although preliminary designs and experiments demonstrate the feasibility of thermal modulation by pushing fluid through embedded micro-vasculatures, one has yet to optimize the performance before translating the concept into real-world applications. It will be beneficial to know how two vital design variables -- host material's thermal conductivity and fluid's heat capacity rate -- affect a thermal regulation system's performance, quantified in terms of the mean surface temperature. This paper fills the remarked inadequacy by performing adjoint-based sensitivity analysis and unravels a surprising non-monotonic trend. Increasing thermal conductivity can either increase or decrease the mean surface temperature; the increase happens if countercurrent heat exchange -- transfer of heat from one segment of the vasculature to another -- is significant. In contrast, increasing the heat capacity rate will invariably lower the mean surface temperature, for which we provide mathematical proof. The reported results (a) dispose of some misunderstandings in the literature, especially on the effect of the host material's thermal conductivity, (b) reveal the role of countercurrent heat exchange in altering the effects of design variables, and (c) guide designers to realize efficient microvascular active-cooling systems. The analysis and findings will advance the field of thermal regulation both on theoretical and practical fronts.

math.NA

Measurement of the Bjorken Sum at very low $Q^2$

We present new data on the Bjorken sum $\overline Γ_1^{p-n}(Q^2)$ at 4-momentum transfer $ 0.021 \leq Q^2 \leq 0.496$ GeV$^2$. The data were obtained in two experiments performed at Jefferson Lab: EG4 on polarized protons and deuterons, and E97110 on polarized $^3$He from which neutron data were extracted. The data cover the domain where chiral effective field theory ($χ$EFT), the leading effective theory of the Strong Force at large distances, is expected to be applicable. We find that our data and the predictions from $χ$EFT are only in marginal agreement. This is somewhat surprising as the contribution from the $Δ(1232)$ resonance is suppressed in this observable, which should make it more reliably predicted by $χ$EFT than quantities in which the $Δ$ contribution is important. The data are also compared to a number of phenomenological models with various degrees of agreement.

nucl-ex

A Search for the LHCb Charmed 'Pentaquark' using Photo-Production of $J/ψ$ at Threshold in Hall C at Jefferson Lab

We propose to measure the photo-production cross section of $J/ψ$ near threshold, in search of the recently observed LHCb hidden-charm resonances $P_c$(4380) and $P_c$(4450) consistent with 'pentaquarks'. The observation of these resonances in photo-production will provide strong evidence of the true resonance nature of the LHCb states, distinguishing them from kinematic enhancements. A bremsstrahlung photon beam produced with an 11 GeV electron beam at CEBAF covers the energy range of $J/ψ$ production from the threshold photo-production energy of 8.2 GeV, to an energy beyond the presumed $P_c$(4450) resonance. The experiment will be carried out in Hall C at Jefferson Lab using a 50μA electron beam incident on a 9% copper radiator. The resulting photon beam passes through a 15 cm liquid hydrogen target, producing $J/ψ$ mesons through a diffractive process in the $t$-channel, or through a resonant process in the $s$- and $u$-channel. The decay $e^+e^-$ pair of the $J/ψ$ will be detected in coincidence using the two high-momentum spectrometers of Hall C. The spectrometer settings have been optimized to distinguish the resonant $s$- and $u$-channel production from the diffractive $t$-channel $J/ψ$ production. The $s$- and $u$-channel production of the charmed 5-quark resonance dominates the $t$-distribution at large $t$. The momentum and angular resolution of the spectrometers is sufficient to observe a clear resonance enhancement in the total cross section and $t$-distribution. We request a total of 11 days of beam time with 9 days to carry the main experiment and 2 days to acquire the needed $t$-channel elastic $J/ψ$ production data for a calibration measurement. This calibration measurement in itself will greatly enhance our knowledge of $t$-channel elastic $J/ψ$ production near threshold.

hep-ex

Modeling population structure under hierarchical Dirichlet processes

We propose a Bayesian nonparametric model to infer population admixture, extending the Hierarchical Dirichlet Process to allow for correlation between loci due to Linkage Disequilibrium. Given multilocus genotype data from a sample of individuals, the model allows inferring classifying individuals as unadmixed or admixed, inferring the number of subpopulations ancestral to an admixed population and the population of origin of chromosomal regions. Our model does not assume any specific mutation process and can be applied to most of the commonly used genetic markers. We present a MCMC algorithm to perform posterior inference from the model and discuss methods to summarise the MCMC output for the analysis of population admixture. We demonstrate the performance of the proposed model in simulations and in a real application, using genetic data from the EDAR gene, which is considered to be ancestry-informative due to well-known variations in allele frequency as well as phenotypic effects across ancestry. The structure analysis of this dataset leads to the identification of a rare haplotype in Europeans.

stat.AP