Searcharxiv⌕ Search

arXiv subjects

K. Black

Publications and source records attributed to K. Black.

17 recordsLinked to original sources
arXiv2026

Efficiency measurements of GEM GE1/1 chambers in the upgraded CMS Endcap Muon System using 2023 collision data at $\sqrt{s}=13.6$ TeV

The CMS experiment at the Large Hadron Collider employs Gas Electron Multiplier (GEM) detectors, a technology based on gaseous ionization, as one of the muon detectors. The muon spectrometer is being upgraded to handle the increased muon flux in the forward region. This study analyzes muon detection efficiency in the GE1/1 triple-GEM detector, using 2023 proton-proton collision data at $\sqrt{s}=13.6$ TeV. A dataset enriched with muons from Z boson decay, with a total recorded luminosity of 17.8 fb$^{-1}$ has been used for this study. The detection efficiency of 137 GEM detectors are measured using muon trajectories established using other detectors in the tracking and muon systems, without use of the GEM detectors. The average efficiency of 137 GEM detectors is $\sim$93.3$\%$. A subset of 108 detectors that had no shorts were operated at the nominal HV working point with average efficiency of $\sim$96$\%$. Efficiency is found to be unaffected by the number of p-p interactions per bunch crossing (pile-up).

hep-ex↗
arXiv2025

United States Muon Collider Community White Paper for the European Strategy for Particle Physics Update

This document is being submitted to the 2024-2026 European Strategy for Particle Physics Update (ESPPU) process on behalf of the US Muon Collider community, with its preparation coordinated by the interim US Muon Collider Coordination Group. The US Muon Collider Community comprises a few hundred American scientists. The purpose of the document is to inform ESPPU about the US plans for Muon Collider research and development (R&D), explain how these efforts align with the broader international R&D initiatives, and present the US community vision for the future realization of this transformative project.

hep-ex↗
arXiv2024

Interim report for the International Muon Collider Collaboration (IMCC)

The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accelerator complex, detectors and physics for a future muon collider. In 2023, European Commission support was obtained for a design study of a muon collider (MuCol) [3]. This project started on 1st March 2023, with work-packages aligned with the overall muon collider studies. In preparation of and during the 2021-22 U.S. Snowmass process, the muon collider project parameters, technical studies and physics performance studies were performed and presented in great detail. Recently, the P5 panel [4] in the U.S. recommended a muon collider R&D, proposed to join the IMCC and envisages that the U.S. should prepare to host a muon collider, calling this their "muon shot". In the past, the U.S. Muon Accelerator Programme (MAP) [5] has been instrumental in studies of concepts and technologies for a muon collider.

physics.acc-ph↗
arXiv2023

Prospects for the Measurement of the Standard Model Higgs Pair Production at the Muon Colliders

We study the Higgs pair production process at a muon collider using b-pair decays of the Higgs bosons. Efficient identification and good measurement resolution for the b-jet pair invariant mass are crucial for unearthing the di-Higgs signal. However, the beam-induced background has potential to drastically degrade the performance. We report on the full simulation studies of the degradation of the reconstructed b-jet pair invariant mass in di-Higgs events, considering only the beam-induced background in the calorimeter. Mitigation strategies for the suppression of the beam-induced background are underway. We also report prospects for the measurement of the Standard Model Higgs pair production at the Muon Colliders at various benchmarks of the collider center of mass energy and integrated luminosity using a fast simulation program.

hep-ex↗
arXiv2022

Enabling U.S. participation in Future Higgs Factories

Exciting proposals for a new Higgs factory collider, aimed at the search for new physics and precision studies of particles and forces, especially measurement of the Higgs boson couplings at the loop level, will be evaluated as part of the Snowmass process. Potential facilities include (among others) ILC, FCC-ee, C3, CEPC, CLIC, muon collider and advanced accelerator concepts being investigated by Snowmass topical group AF6, potentially located in Asia, Europe, or the United States. The European Strategy has endorsed an electron-positron Higgs factory as its highest priority after HL-LHC. Much of the detector, software, and physics preparative studies needed for these machines is in common, and is currently being implemented by physicists world-wide. In this white paper for the 2021 Snowmass process we look at current global activity on future Higgs factories and give examples of investments that could be made in these common areas over the next five years to establish a leadership role for the U.S. in a future Higgs factory, wherever it is built. The U.S. high energy physics program confronts a number of challenges that a strong role in the study of the Higgs boson can address. These include, in addition to the scientific results, maintaining leading roles in international partnerships, nurturing and advancing world-leading capabilities and expert resources, and maintaining and attracting talent. The international effort would benefit from increased U.S. participation, and the U.S., in turn, would maintain stature through the partnership.

hep-ex↗
arXiv2022

Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade

The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate.

physics.ins-det↗
arXiv2022

MPGDs for tracking and Muon detection at future high energy physics colliders

In the next years, the energy and intensity frontiers of the experimental Particle Physics will be pushed forward with the upgrade of existing accelerators (LHC at CERN) and the envisaged construction of new machines at energy scales up to hundreds TeV or with unprecedented intensity (FCC-hh, FCC-ee, ILC, Muon Collider). Large size, cost-effective, high-efficiency detection systems in high background environments are required in order to accomplish the physics program. MPGDs offer a diversity of technologies that allow them to meet the required performance challenges at future facilities thanks to the specific advantages that each technology provides. MPGDs allow stable operation, with environmentally friendly gas mixtures, at very high background particle flux with high detection efficiency and excellent spatial resolution. These features make MPGD one of the primary choices as precise muon tracking and trigger system in general-purpose detectors at future HEP colliders. In addition, the low material budget and the flexibility of the base material make MPGDs suitable for the development of very light, full cylindrical fine tracking inner trackers at lepton colliders. On-going R&Ds aim at pushing the detector performance at the limits of each technology. We are working in continuing to consolidate the construction and stable operation of large-size detectors, able to cope with large particle fluxes. In this white paper, we describe some of the most prominent MPGD technologies, their performance measurements, the challenges faced in the most recent applications, and the areas of improvement towards efficient tracking and Muon detection at future high energy physics colliders.

physics.ins-det↗
arXiv2021

Performance of a Triple-GEM Demonstrator in $pp$ Collisions at the CMS Detector

After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstrator GEM detectors were installed in CMS during 2017 to gain operational experience and perform a preliminary investigation of detector performance. We present the results of triple-GEM detector performance studies performed in situ during normal CMS and LHC operations in 2018. The distribution of cluster size and the efficiency to reconstruct high $p_T$ muons in proton--proton collisions are presented as well as the measurement of the environmental background rate to produce hits in the GEM detector.

physics.ins-det↗
arXiv2021

Modeling the triple-GEM detector response to background particles for the CMS Experiment

An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The simulation framework uses a combination of the FLUKA and Geant4 packages to obtain the hit rate. FLUKA provides the radiation environment around the GE1/1 chambers, which is comprised of the particle flux with momentum direction and energy spectra ranging from $10^{-11}$ to $10^{4}$ MeV for neutrons, $10^{-3}$ to $10^{4}$ MeV for $γ$'s, $10^{-2}$ to $10^{4}$ MeV for $e^{\pm}$, and $10^{-1}$ to $10^{4}$ MeV for charged hadrons. Geant4 provides an estimate of detector response (sensitivity) based on an accurate description of detector geometry, material composition and interaction of particles with the various detector layers. The MC simulated hit rate is estimated as a function of the perpendicular distance from the beam line and agrees with data within the assigned uncertainties of 10-14.5%. This simulation framework can be used to obtain a reliable estimate of background rates expected at the High Luminosity LHC.

physics.ins-det↗
arXiv2020

Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade

We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequently maximize the signal-to-noise ratio for the detector. We find agreement at the 1.5--4.8% level between the two methods of calculations and on the average at the 17% level between calculations and measurements. A configuration with halved strip lengths and doubled strip widths results in a measured 27--29% reduction over the original configuration while leaving the total number of strips unchanged. We have now adopted this design modification for all eight module types of the GE2/1 detector and will produce the final detector with this new strip design.

physics.ins-det↗
arXiv2019

High-Precision X-ray Timing of Three Millisecond Pulsars with NICER: Stability Estimates and Comparison with Radio

The Neutron Star Interior Composition Explorer (NICER) is an X-ray astrophysics payload on the International Space Station. It enables unprecedented high-precision timing of millisecond pulsars without the pulse broadening and delays due to dispersion and scattering within the interstellar medium that plague radio timing. We present initial timing results from a year of data on the millisecond pulsars PSR B1937+21 and PSR J0218+4232, and nine months of data on PSR B1821-24. NICER time-of-arrival uncertainties for the three pulsars are consistent with theoretical lower bounds and simulations based on their pulse shape templates and average source and background photon count rates. To estimate timing stability, we use the $σ_z$ measure, which is based on the average of the cubic coefficients of polynomial fits to subsets of timing residuals. So far we are achieving timing stabilities $σ_z \approx 3 \times 10^{-14}$ for PSR B1937+21 and on the order of $10^{-12}$ for PSRs B1821$-$24 and J0218+4232. Within the span of our \textit{NICER} data we do not yet see the characteristic break point in the slope of $σ_z$; detection of such a break would indicate that further improvement in the cumulative root-mean-square (RMS) timing residual is limited by timing noise. We see this break point in our comparison radio data sets for PSR B1821-24 and PSR B1937+21 on time scales of $> 2$ years.

astro-ph.HE↗
arXiv2010

New Physics at the LHC. A Les Houches Report: Physics at TeV Colliders 2009 - New Physics Working Group

We present a collection of signatures for physics beyond the standard model that need to be explored at the LHC. First, are presented various tools developed to measure new particle masses in scenarios where all decays include an unobservable particle. Second, various aspects of supersymmetric models are discussed. Third, some signatures of models of strong electroweak symmetry are discussed. In the fourth part, a special attention is devoted to high mass resonances, as the ones appearing in models with warped extra dimensions. Finally, prospects for models with a hidden sector/valley are presented. Our report, which includes brief experimental and theoretical reviews as well as original results, summarizes the activities of the "New Physics" working group for the "Physics at TeV Colliders" workshop (Les Houches, France, 8-26 June, 2009).

hep-ph↗
arXiv2008

New Physics at the LHC: A Les Houches Report. Physics at Tev Colliders 2007 -- New Physics Working Group

We present a collection of signatures for physics beyond the standard model that need to be explored at the LHC. The signatures are organized according to the experimental objects that appear in the final state, and in particular the number of high pT leptons. Our report, which includes brief experimental and theoretical reviews as well as original results, summarizes the activities of the "New Physics'' working group for the "Physics at TeV Colliders" workshop (Les Houches, France, 11-29 June, 2007).

hep-ph↗
arXiv2007

An X-ray Polarimeter for Constellation-X

Polarimetry remains a largely unexploited technique in observational X-ray astronomy which could provide insight in the study of the strong gravity and magnetic fields at the core of the Constellation-X observational program. Adding a polarization capability to the Constellation-X instrumentation would be immensely powerful. It would make Constellation the first space observatory to simultaneously measure all astrophysically relevant parameters of source X-ray photons; their position (imaging), energy (spectroscopy), arrival time (timing), and polarization. Astrophysical polarimetry requires sensitive well-calibrated instruments. Many exciting objects are extra-galactic (i.e. faint) and may have small polarization. Recent advances in efficiency and bandpass make it attractive to consider a polarimetry Science Enhancement Package for the Constellation-X mission.

astro-ph↗