arXiv subjects

K. Bystrov

Publications and source records attributed to K. Bystrov.

4 recordsLinked to original sources

arXiv2019

Single-crystal and polycrystalline diamond erosion studies in Pilot-PSI

Diamond is a promising candidate for enhancing the negative-ion surface production in the ion sources for neutral injection in fusion reactors; hence evaluation of its reactivity towards hydrogen plasma is of high importance. High quality PECVD single crystal and polycrystalline diamond samples were exposed in Pilot-PSI with the D + flux of (4-7)$\times$10 24 m-2 s-1 and the impact energy of 7-9 eV per deuteron at different surface temperatures; under such conditions physical sputtering is negligible, however chemical sputtering is important. Net chemical sputtering yield $Y = 9.7\times 10^{-3}$ at/ion at 800$^\circ$C was precisely measured ex-situ using a protective platinum mask (5x10x2 $μ$m) deposited beforehand on a single crystal followed by the post-mortem analysis using Transmission Electron Microscopy (TEM). The structural properties of the exposed diamond surface were analyzed by Raman spectroscopy and X-ray Photoelectron Spectroscopy (XPS). Gross chemical sputtering yields were determined in-situ by means of optical emission spectroscopy of the molecular CH AX band for several surface temperatures. We observed a bell shape dependence of the erosion yield versus temperature between 400$^\circ$C and 1200$^\circ$C, with a maximum yield of ~1.5$\times$10-2 at/ion attained at 900$^\circ$C. The yields obtained for diamond are relatively high $(0.51.5)\times 10^{-2}$ at/ion, comparable with those of graphite. XPS analyses show amorphization of diamond surface within 1 nm depth, in good agreement with molecular dynamics (MD) simulation. MD was also applied to study the hydrogen impact energy threshold for erosion of [100] diamond surface at different temperatures.

physics.plasm-ph↗

arXiv2015

Dust remobilization in fusion plasmas under steady state conditions

The first combined experimental and theoretical studies of dust remobilization by plasma forces are reported. The main theoretical aspects of remobilization in fusion devices under steady state conditions are analyzed. In particular, the dominant role of adhesive forces is highlighted and generic remobilization conditions - direct lift-up, sliding, rolling - are formulated. A novel experimental technique is proposed, based on controlled adhesion of dust grains on tungsten samples combined with detailed mapping of the dust deposition profile prior and post plasma exposure. Proof-of-principle experiments in the TEXTOR tokamak and the EXTRAP-T2R reversed-field pinch are presented. The versatile environment of the linear device Pilot-PSI allowed for experiments with different magnetic field topologies and varying plasma conditions that were complemented with camera observations.

physics.plasm-ph↗

arXiv2012

Erosion yields of carbon under various plasma conditions in Pilot-PSI

Fine-grain graphite targets have been exposed to ITER divertor relevant plasmas in Pilot-PSI to address material migration issues in fusion devices. Optical emission spectroscopy and mass loss measurements have been employed to quantify gross chemical erosion and net erosion yields, respectively. Effects of the ion impact energy and target geometry on carbon erosion yields have been studied. It is concluded that temporal evolution of gross chemical erosion is strongly connected with changes in morphology of plasma exposed surfaces. The net carbon erosion yield is increased when the targets are partly covered by insulating boron-nitride rings.

physics.plasm-ph↗

arXiv2012

Dissociative recombination and electron-impact de-excitation in CH photon emission under ITER divertor-relevant plasma conditions

For understanding carbon erosion and redeposition in nuclear fusion devices, it is important to understand the transport and chemical break-up of hydrocarbon molecules in edge plasmas, often diagnosed by emission of the CH A^2Δ- X^2ΠGerö band around 430 nm. The CH A-level can be excited either by electron-impact or by dissociative recombination (D.R.) of hydrocarbon ions. These processes were included in the 3D Monte Carlo impurity transport code ERO. A series of methane injection experiments was performed in the high-density, low-temperature linear plasma generator Pilot-PSI, and simulated emission intensity profiles were benchmarked against these experiments. It was confirmed that excitation by D.R. dominates at T_e < 1.5 eV. The results indicate that the fraction of D.R. events that lead to a CH radical in the A-level and consequent photon emission is at least 10%. Additionally, quenching of the excited CH radicals by electron impact de-excitation was included in the modeling. This quenching is shown to be significant: depending on the electron density, it reduces the effective CH emission by a factor of 1.4 at n_e=1.3*10^20 m^-3, to 2.8 at n_e=9.3*10^20 m^-3. Its inclusion significantly improved agreement between experiment and modeling.

physics.plasm-ph↗