arXiv subjects

K. Dawson

Publications and source records attributed to K. Dawson.

At least 55 records · Page 3Linked to original sources

arXiv2023

3D Correlations in the Lyman-$α$ Forest from Early DESI Data

We present the first measurements of Lyman-$α$ (Ly$α$) forest correlations using early data from the Dark Energy Spectroscopic Instrument (DESI). We measure the auto-correlation of Ly$α$ absorption using 88,509 quasars at $z>2$, and its cross-correlation with quasars using a further 147,899 tracer quasars at $z\gtrsim1.77$. Then, we fit these correlations using a 13-parameter model based on linear perturbation theory and find that it provides a good description of the data across a broad range of scales. We detect the BAO peak with a signal-to-noise ratio of $3.8σ$, and show that our measurements of the auto- and cross-correlations are fully-consistent with previous measurements by the Extended Baryon Oscillation Spectroscopic Survey (eBOSS). Even though we only use here a small fraction of the final DESI dataset, our uncertainties are only a factor of 1.7 larger than those from the final eBOSS measurement. We validate the existing analysis methods of Ly$α$ correlations in preparation for making a robust measurement of the BAO scale with the first year of DESI data.

astro-ph.CO↗

arXiv2023

The DESI Survey Validation: Results from Visual Inspection of Bright Galaxies, Luminous Red Galaxies, and Emission Line Galaxies

The Dark Energy Spectroscopic Instrument (DESI) Survey has obtained a set of spectroscopic measurements of galaxies to validate the final survey design and target selections. To assist in these tasks, we visually inspect (VI) DESI spectra of approximately 2,500 bright galaxies, 3,500 luminous red galaxies (LRGs), and 10,000 emission line galaxies (ELGs), to obtain robust redshift identifications. We then utilize the VI redshift information to characterize the performance of the DESI operation. Based on the VI catalogs, our results show that the final survey design yields samples of bright galaxies, LRGs, and ELGs with purity greater than $99\%$. Moreover, we demonstrate that the precision of the redshift measurements is approximately 10 km/s for bright galaxies and ELGs and approximately 40 km/s for LRGs. The average redshift accuracy is within 10 km/s for the three types of galaxies. The VI process also helps improve the quality of the DESI data by identifying spurious spectral features introduced by the pipeline. Finally, we show examples of unexpected real astronomical objects, such as Ly$α$ emitters and strong lensing candidates, identified by VI. These results demonstrate the importance and utility of visually inspecting data from incoming and upcoming surveys, especially during their early operation phases.

astro-ph.CO↗

arXiv2023

The Spectroscopic Data Processing Pipeline for the Dark Energy Spectroscopic Instrument

We describe the spectroscopic data processing pipeline of the Dark Energy Spectroscopic Instrument (DESI), which is conducting a redshift survey of about 40 million galaxies and quasars using a purpose-built instrument on the 4-m Mayall Telescope at Kitt Peak National Observatory. The main goal of DESI is to measure with unprecedented precision the expansion history of the Universe with the Baryon Acoustic Oscillation technique and the growth rate of structure with Redshift Space Distortions. Ten spectrographs with three cameras each disperse the light from 5000 fibers onto 30 CCDs, covering the near UV to near infrared (3600 to 9800 Angstrom) with a spectral resolution ranging from 2000 to 5000. The DESI data pipeline generates wavelength- and flux-calibrated spectra of all the targets, along with spectroscopic classifications and redshift measurements. Fully processed data from each night are typically available to the DESI collaboration the following morning. We give details about the pipeline's algorithms, and provide performance results on the stability of the optics, the quality of the sky background subtraction, and the precision and accuracy of the instrumental calibration. This pipeline has been used to process the DESI Survey Validation data set, and has exceeded the project's requirements for redshift performance, with high efficiency and a purity greater than 99 percent for all target classes.

astro-ph.IM↗

arXiv2022

The DESI Survey Validation: Results from Visual Inspection of the Quasar Survey Spectra

A key component of the Dark Energy Spectroscopic Instrument (DESI) survey validation (SV) is a detailed visual inspection (VI) of the optical spectroscopic data to quantify key survey metrics. In this paper we present results from VI of the quasar survey using deep coadded SV spectra. We show that the majority (~70%) of the main-survey targets are spectroscopically confirmed as quasars, with ~16% galaxies, ~6% stars, and ~8% low-quality spectra lacking reliable features. A non-negligible fraction of the quasars are misidentified by the standard spectroscopic pipeline but we show that the majority can be recovered using post-pipeline "afterburner" quasar-identification approaches. We combine these "afterburners" with our standard pipeline to create a modified pipeline to improve the overall quasar yield. At the depth of the main DESI survey both pipelines achieve a good-redshift purity (reliable redshifts measured within 3000 km/s) of ~99%; however, the modified pipeline recovers ~94% of the visually inspected quasars, as compared to ~86% from the standard pipeline. We demonstrate that both pipelines achieve an median redshift precision and accuracy of ~100 km/s and ~70 km/s, respectively. We constructed composite spectra to investigate why some quasars are missed by the standard spectroscopic pipeline and find that they are more host-galaxy dominated (i.e., distant analogs of "Seyfert galaxies") and/or dust reddened than the standard-pipeline quasars. We also show example spectra to demonstrate the overall diversity of the DESI quasar sample and provide strong-lensing candidates where two targets contribute to a single spectrum.

astro-ph.GA↗

arXiv2022

Target Selection and Validation of DESI Luminous Red Galaxies

The Dark Energy Spectroscopic Instrument (DESI) is carrying out a 5-year survey that aims to measure the redshifts of tens of millions of galaxies and quasars, including 8 million luminous red galaxies (LRGs) in the redshift range of $0.4<z<{\sim}\,1.0$. Here we present the selection of the DESI LRG sample and assess its spectroscopic performance using data from Survey Validation (SV) and the first 2 months of the Main Survey. The DESI LRG sample, selected using $g$, $r$, $z$, and $W1$ photometry from the DESI Legacy Imaging Surveys, is highly robust against imaging systematics. The sample has a target density of 605 deg$^{-2}$ and a comoving number density of $5\times10^{-4}\ h^3\mathrm{Mpc}^{-3}$ in $0.4<z<0.8$; this is a significantly higher density than previous LRG surveys (such as SDSS, BOSS and eBOSS) while also extending to $z \sim 1$. After applying a bright star veto mask developed for the sample, $98.9\%$ of the observed LRG targets yield confident redshifts (with a catastrophic failure rate of $0.2\%$ in the confident redshifts), and only $0.5\%$ of the LRG targets are stellar contamination. The LRG redshift efficiency varies with source brightness and effective exposure time, and we present a simple model that accurately characterizes this dependence. In the appendices, we describe the extended LRG samples observed during SV.

astro-ph.CO↗

arXiv2022

Target Selection and Validation of DESI Emission Line Galaxies

The Dark Energy Spectroscopic Instrument (DESI) will precisely constrain cosmic expansion and the growth of structure by collecting $\sim$40 million extra-galactic redshifts across $\sim$80\% of cosmic history and one third of the sky. The Emission Line Galaxy (ELG) sample, which will comprise about one-third of all DESI tracers, will be used to probe the Universe over the $0.6 < z < 1.6$ range, which includes the $1.1<z<1.6$ range, expected to provide the tightest constraints. We present the target selection of the DESI SV1 Survey Validation and Main Survey ELG samples, which relies on the Legacy Surveys imaging. The Main ELG selection consists of a $g$-band magnitude cut and a $(g-r)$ vs.\ $(r-z)$ color box, while the SV1 selection explores extensions of the Main selection boundaries. The Main ELG sample is composed of two disjoint subsamples, which have target densities of about 1940 deg$^{-2}$ and 460 deg$^{-2}$, respectively. We first characterize their photometric properties and density variations across the footprint. Then we analyze the DESI spectroscopic data obtained since December 2020 during the Survey Validation and the Main Survey up to December 2021. We establish a preliminary criterion to select reliable redshifts, based on the \oii~flux measurement, and assess its performance. Using that criterion, we are able to present the spectroscopic efficiency of the Main ELG selection, along with its redshift distribution. We thus demonstrate that the the main selection with higher target density sample should provide more than 400 deg$^{-2}$ reliable redshifts in both the $0.6<z<1.1$ and the $1.1<z<1.6$ ranges.

astro-ph.CO↗

arXiv2022

Dark Energy Survey Year 3 Results: Calibration of Lens Sample Redshift Distributions using Clustering Redshifts with BOSS/eBOSS

We present clustering redshift measurements for Dark Energy Survey (DES) lens sample galaxies to be used in weak gravitational lensing and galaxy clustering studies. To perform this measurement, we cross-correlate with spectroscopic galaxies from the Baryon Acoustic Oscillation Survey (BOSS) and its extension, eBOSS. We validate our methodology in simulations, including a new technique to calibrate systematic errors due to the galaxy clustering bias, finding our method to be generally unbiased in calibrating the mean redshift. We apply our method to the data, and estimate the redshift distribution for eleven different photometrically-selected bins. We find general agreement between clustering redshift and photometric redshift estimates, with differences on the inferred mean redshift to be below $|Δz|=0.01$ in most of the bins. We also test a method to calibrate a width parameter for redshift distributions, which we found necessary to use for some of our samples. Our typical uncertainties on the mean redshift ranged from 0.003 to 0.008, while our uncertainties on the width ranged from 4 to 9\%. We discuss how these results calibrate the photometric redshift distributions used in companion DES Year 3 Results papers.

astro-ph.CO↗

arXiv2022

Overview of the Instrumentation for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) has embarked on an ambitious five-year survey to explore the nature of dark energy with spectroscopy of 40 million galaxies and quasars. DESI will determine precise redshifts and employ the Baryon Acoustic Oscillation method to measure distances from the nearby universe to z > 3.5, as well as measure the growth of structure and probe potential modifications to general relativity. In this paper we describe the significant instrumentation we developed for the DESI survey. The new instrumentation includes a wide-field, 3.2-deg diameter prime-focus corrector that focuses the light onto 5020 robotic fiber positioners on the 0.812 m diameter, aspheric focal surface. The positioners and their fibers are divided among ten wedge-shaped petals. Each petal is connected to one of ten spectrographs via a contiguous, high-efficiency, nearly 50 m fiber cable bundle. The ten spectrographs each use a pair of dichroics to split the light into three channels that together record the light from 360 - 980 nm with a resolution of 2000 to 5000. We describe the science requirements, technical requirements on the instrumentation, and management of the project. DESI was installed at the 4-m Mayall telescope at Kitt Peak, and we also describe the facility upgrades to prepare for DESI and the installation and functional verification process. DESI has achieved all of its performance goals, and the DESI survey began in May 2021. Some performance highlights include RMS positioner accuracy better than 0.1", SNR per \sqrtÅ > 0.5 for a z > 2 quasar with flux 0.28e-17 erg/s/cm^2/A at 380 nm in 4000s, and median SNR = 7 of the [OII] doublet at 8e-17 erg/s/cm^2 in a 1000s exposure for emission line galaxies at z = 1.4 - 1.6. We conclude with highlights from the on-sky validation and commissioning of the instrument, key successes, and lessons learned. (abridged)

astro-ph.IM↗

arXiv2020

Dark Energy Survey Year 3 Results: Clustering Redshifts -- Calibration of the Weak Lensing Source Redshift Distributions with redMaGiC and BOSS/eBOSS

We present the calibration of the Dark Energy Survey Year 3 (DES Y3) weak lensing source galaxy redshift distributions $n(z)$ from clustering measurements. In particular, we cross-correlate the weak lensing (WL) source galaxies sample with redMaGiC galaxies (luminous red galaxies with secure photometric redshifts) and a spectroscopic sample from BOSS/eBOSS to estimate the redshift distribution of the DES sources sample. Two distinct methods for using the clustering statistics are described. The first uses the clustering information independently to estimate the mean redshift of the source galaxies within a redshift window, as done in the DES Y1 analysis. The second method establishes a likelihood of the clustering data as a function of $n(z)$, which can be incorporated into schemes for generating samples of $n(z)$ subject to combined clustering and photometric constraints. Both methods incorporate marginalisation over various astrophysical systematics, including magnification and redshift-dependent galaxy-matter bias. We characterise the uncertainties of the methods in simulations; the first method recovers the mean $z$ of tomographic bins to RMS (precision) of $\sim 0.014$. Use of the second method is shown to vastly improve the accuracy of the shape of $n(z)$ derived from photometric data. The two methods are then applied to the DES Y3 data.

astro-ph.CO↗

arXiv2020

A tomographic map of the large-scale matter distribution using the eBOSS Stripe 82 Ly-$α$ forest

The Lyman-$α$ (hereafter Ly-$α$) forest is a probe of large-scale matter density fluctuations at high redshift, $z > 2.1$. It consists of HI absorption spectra along individual lines-of-sight. If the line-of-sight density is large enough, 3D maps of HI absorption can be inferred by tomographic reconstruction. In this article, we investigate the Ly-$α$ forest available in the Stripe 82 field ($220\,\mathrm{deg^{2}}$), based on the quasar spectra from SDSS Data Release DR16. The density of observed quasar spectra is $37\,\mathrm{deg^{-2}}$ with a mean pixel signal-to-noise ratio of two per angstrom. This study provides an intermediate case between the average SDSS density and that of the much denser but smaller CLAMATO survey. We derive a 3D map of large-scale matter fluctuations from these data, using a Wiener filter technique. The total volume of the map is $0.94\,\mathrm{h^{-3} Gpc^{3}}$. Its resolution is $13\,\mathrm{h^{-1} Mpc}$, which is related to the mean transverse distance between nearest lines-of-sight. From this map, we provide a catalog of voids and protocluster candidates in the cosmic web. The map-making and void catalog are compared to simulated eBOSS Stripe 82 observations. A stack over quasar positions provides a visualization of the Ly-$α$ quasar cross-correlation. This tomographic reconstruction constitutes the largest-volume high-redshift 3D map of matter fluctuations.

astro-ph.CO↗

arXiv2018

The Sloan Digital Sky Survey Quasar Catalog: Fourteenth Data Release

We present the Data Release 14 Quasar catalog (DR14Q) from the extended Baryon Oscillation Spectroscopic Survey (eBOSS) of the Sloan Digital Sky Survey IV (SDSS-IV). This catalog includes all SDSS-IV/eBOSS objects that were spectroscopically targeted as quasar candidates and that are confirmed as quasars via a new automated procedure combined with a partial visual inspection of spectra, have luminosities $M_{\rm i} \left[ z=2 \right] < -20.5$ (in a $Λ$CDM cosmology with $H_0 = 70 \ {\rm km \ s^{-1} \ Mpc ^{-1}}$, $Ω_{\rm M} = 0.3$, and $Ω_{\rm Λ} = 0.7$), and either display at least one emission line with a full width at half maximum (FWHM) larger than $500 \ {\rm km \ s^{-1}}$ or, if not, have interesting/complex absorption features. The catalog also includes previously spectroscopically-confirmed quasars from SDSS-I, II and III. The catalog contains 526,356 quasars 144,046 are new discoveries since the beginning of SDSS-IV) detected over 9,376 deg$^2$ (2,044 deg$^2$ having new spectroscopic data available) with robust identification and redshift measured by a combination of principal component eigenspectra. The catalog is estimated to have about 0.5% contamination. The catalog identifies 21,877 broad absorption line quasars and lists their characteristics. For each object, the catalog presents SDSS five-band CCD-based photometry with typical accuracy of 0.03 mag. The catalog also contains X-ray, ultraviolet, near-infrared, and radio emission properties of the quasars, when available, from other large-area surveys.

astro-ph.GA↗

arXiv2016

The SDSS-IV eBOSS: emission line galaxy catalogues at z=0.8 and study of systematic errors in the angular clustering

We present two wide-field catalogs of photometrically-selected emission line galaxies (ELGs) at z=0.8 covering about 2800 deg^2 over the south galactic cap. The catalogs were obtained using a Fisher discriminant technique described in a companion paper. The two catalogs differ by the imaging used to define the Fisher discriminant: the first catalog includes imaging from the Sloan Digital Sky Survey and the Wide-Field Infrared Survey Explorer, the second also includes information from the South Galactic Cap U-band Sky Survey (SCUSS). Containing respectively 560,045 and 615,601 objects, they represent the largest ELG catalogs available today and were designed for the ELG programme of the extended Baryon Oscillation Spectroscopic Survey (eBOSS). We study potential sources of systematic variation in the angular distribution of the selected ELGs due to fluctuations of the observational parameters. We model the influence of the observational parameters using a multivariate regression and implement a weighting scheme that allows effective removal of all of the systematic errors induced by the observational parameters. We show that fluctuations in the imaging zero-points of the photometric bands have minor impact on the angular distribution of objects in our catalogs. We compute the angular clustering of both catalogs and show that our weighting procedure effectively removes spurious clustering on large scales. We fit a model to the small scale angular clustering, showing that the selections have similar biases of 1.35/D_a(z) and 1.28/D_a(z). Both catalogs are publicly available.

astro-ph.CO↗

arXiv2016

The SDSS-IV extended Baryon Oscillation Spectroscopic Survey: selecting emission line galaxies using the Fisher discriminant

We present a new selection technique of producing spectroscopic target catalogues for massive spectroscopic surveys for cosmology. This work was conducted in the context of the extended Baryon Oscillation Spectroscopic Survey (eBOSS), which will use ~200 000 emission line galaxies (ELGs) at 0.6<zspec<1.0 to obtain a precise baryon acoustic oscillation measurement. Our proposed selection technique is based on optical and near-infrared broad-band filter photometry. We used a training sample to define a quantity, the Fisher discriminant (linear combination of colours), which correlates best with the desired properties of the target: redshift and [OII] flux. The proposed selections are simply done by applying a cut on magnitudes and this Fisher discriminant. We used public data and dedicated SDSS spectroscopy to quantify the redshift distribution and [OII] flux of our ELG target selections. We demonstrate that two of our selections fulfil the initial eBOSS/ELG redshift requirements: for a target density of 180 deg^2, ~70% of the selected objects have 0.6<zspec<1.0 and only ~1% of those galaxies in the range 0.6<zspec<1.0 are expected to have a catastrophic zspec estimate. Additionally, the stacked spectra and stacked deep images for those two selections show characteristic features of star-forming galaxies. The proposed approach using the Fisher discriminant could, however, be used to efficiently select other galaxy populations, based on multi-band photometry, providing that spectroscopic information is available. This technique could thus be useful for other future massive spectroscopic surveys such as PFS, DESI, and 4MOST.

astro-ph.GA↗

arXiv2015

The Extended Baryon Oscillation Spectroscopic Survey: Variability Selection and Quasar Luminosity Function

The SDSS-IV/eBOSS has an extensive quasar program that combines several selection methods. Among these, the photometric variability technique provides highly uniform samples, unaffected by the redshift bias of traditional optical-color selections, when $z= 2.7 - 3.5$ quasars cross the stellar locus or when host galaxy light affects quasar colors at $z < 0.9$. Here, we present the variability selection of quasars in eBOSS, focusing on a specific program that led to a sample of 13,876 quasars to $g_{\rm dered}=22.5$ over a 94.5 deg$^2$ region in Stripe 82, an areal density 1.5 times higher than over the rest of the eBOSS footprint. We use these variability-selected data to provide a new measurement of the quasar luminosity function (QLF) in the redshift range $0.68 2.2$. Both models are constrained to be continuous at $z=2.2$. They present a flattening of the bright-end slope at large redshift. The LEDE model indicates a reduction of the break density with increasing redshift, but the evolution of the break magnitude depends on the parameterization. The models are in excellent accord, predicting quasar counts that agree within 0.3\% (resp., 1.1\%) to $g<22.5$ (resp., $g<23$). The models are also in good agreement over the entire redshift range with models from previous studies.

astro-ph.CO↗

arXiv2014

Distance Probes of Dark Energy

This document presents the results from the Distances subgroup of the Cosmic Frontier Community Planning Study (Snowmass 2013). We summarize the current state of the field as well as future prospects and challenges. In addition to the established probes using Type IA supernovae and baryon acoustic oscillations, we also consider prospective methods based on clusters, active galactic nuclei, gravitational wave sirens and strong lensing time delays.

astro-ph.CO↗

arXiv2013

Luminosity Function from dedicated SDSS-III and MMT data of quasars in 0.7<z<4.0 selected with a new approach

We present a measurement of the quasar luminosity function in the range 0.68 2.15. Using pure luminosity evolution models, we fitted our LF measurements, and predicted quasar number counts as a function of redshift and observed magnitude. These predictions are useful inputs for future cosmology surveys such as those relying on the observation of quasars to measure baryon acoustic oscillations.

astro-ph.CO↗

arXiv2011

The BigBOSS Experiment

BigBOSS is a Stage IV ground-based dark energy experiment to study baryon acoustic oscillations (BAO) and the growth of structure with a wide-area galaxy and quasar redshift survey over 14,000 square degrees. It has been conditionally accepted by NOAO in response to a call for major new instrumentation and a high-impact science program for the 4-m Mayall telescope at Kitt Peak. The BigBOSS instrument is a robotically-actuated, fiber-fed spectrograph capable of taking 5000 simultaneous spectra over a wavelength range from 340 nm to 1060 nm, with a resolution R = 3000-4800. Using data from imaging surveys that are already underway, spectroscopic targets are selected that trace the underlying dark matter distribution. In particular, targets include luminous red galaxies (LRGs) up to z = 1.0, extending the BOSS LRG survey in both redshift and survey area. To probe the universe out to even higher redshift, BigBOSS will target bright [OII] emission line galaxies (ELGs) up to z = 1.7. In total, 20 million galaxy redshifts are obtained to measure the BAO feature, trace the matter power spectrum at smaller scales, and detect redshift space distortions. BigBOSS will provide additional constraints on early dark energy and on the curvature of the universe by measuring the Ly-alpha forest in the spectra of over 600,000 2.2 < z < 3.5 quasars. BigBOSS galaxy BAO measurements combined with an analysis of the broadband power, including the Ly-alpha forest in BigBOSS quasar spectra, achieves a FOM of 395 with Planck plus Stage III priors. This FOM is based on conservative assumptions for the analysis of broad band power (kmax = 0.15), and could grow to over 600 if current work allows us to push the analysis to higher wave numbers (kmax = 0.3). BigBOSS will also place constraints on theories of modified gravity and inflation, and will measure the sum of neutrino masses to 0.024 eV accuracy.

astro-ph.IM↗

arXiv2010

Cluster galaxies in XMMU J2235-2557: galaxy population properties in most massive environments at z~1.4

We present a multi-wavelength study of galaxy populations in the core of the massive, X-ray luminous cluster XMMU J2235 at z=1.39, based on VLT and HST optical and near-infrared photometry. Luminosity functions in the z, H, and Ks bands show a faint-end slope consistent with being flat, and a characteristic magnitude M* close to passive evolution predictions of M* of local massive clusters, with a formation redshift z>2. The color-magnitude and color-mass diagrams show evidence of a tight red sequence of massive galaxies, with overall old stellar populations, generally early-type morphology, typically showing early-type spectral features and rest-frame far-UV emission consistent with very low star formation rates (SFR<0.2Msun/yr). Star forming spectroscopic members, with SFRs of up to ~100Msun/yr, are all located at clustercentric distances >~250kpc, with the central cluster region already appearing effectively quenched. Massive galaxies in the core of this cluster appear to be in an advanced evolutionary stage in terms of both star formation and mass assembly. The high-mass end of the galaxy stellar mass function is essentially already in place, and the stellar mass fraction estimated within r500 (~1%, Kroupa IMF) is already similar to that of local massive clusters. On the other hand, morphological analysis of the massive red sequence galaxies suggests that they are smaller than similarly massive local early-types. While possibly affected by systematics and biases, this result might imply that, in spite of the overall early assembly of these sources, their evolution is not complete, and processes like minor (and likely dry) merging might still shape their structural properties to resemble those of their local counterparts, without substantially affecting their stellar mass or host stellar populations.[abridged]

astro-ph.CO↗