arXiv subjects

K. Demyk

Publications and source records attributed to K. Demyk.

At least 19 recordsLinked to original sources

arXiv2026

Tracing grain growth in the forming prestellar core L1506C with 3D modeling of Herschel, IRAM, and CFHT observations

In the early phases of star formation, properties of prestellar cores are commonly inferred from observations of thermal dust emission and thus depend on dust properties, which must be carefully characterized. Our target, L1506C, is part of the filament L1506 in the Taurus molecular cloud. The spectral energy distributions over the whole spectral range (from 160 {\mu}m to 2 mm), built from Herschel PACS and SPIRE and IRAM-NIKA2 data, have been fitted with a modified blackbody. These data were also modelled using the 3D radiative transfer code SOC and the latest THEMIS 2 dust model using extinction observations from WIRCam at CFHT and from Spitzer as additional constraints. The MBB modeling reveals that L1506C is fragmented into two low density cores with masses smaller than their Jeans masses. The dust color temperature and the emissivity spectral index show clear anti-correlation and change in grain properties. Grains more evolved than the diffuse interstellar medium are needed to model the densest part showing that grain growth already occurs at very early stage of star formation, even before the onset of gravitational collapse.

astro-ph.GA↗

arXiv2024

Inferring the dust emission at submillimeter and millimeter wavelengths using neural networks

The Planck mission provided all-sky dust emission maps in the submm to mm range at an angular resolution of 5'. In addition, some specific sources can be observed at long wavelengths and higher resolution using ground-based telescopes. These observations are limited to small scales and require extensive data processing before they become available for scientific analysis. They also suffer from extended emission filtering. At present, we are still unable to fully understand the emissivity variations observed in different astrophysical environments at long wavelengths. It is therefore challenging to estimate any dust emission in the submm-mm at a better resolution than the 5' from Planck. In this analysis, based on supervised deep learning algorithms, we produced dust emission predictions in the two Planck bands centered at 850 mic and 1.38 mm, at the Herschel resolution (37''). Herschel data of Galactic environments, ranging from 160 to 500 mic and smoothed to 5', were used to train the neural network. Then, using Herschel data only, the model was applied to predict dust emission maps at 37''. The neural network is capable of reproducing dust emission maps of various Galactic environments. Remarkably, it also performs well for nearby extragalactic environments. This could indicate that large dust grains have similar properties in both our Galaxy and nearby galaxies, or at least that their spectral behaviors are comparable in Galactic and extragalactic environments. We provide dust emission prediction maps at 850 mic and 1.38 mm at the 37'' of several surveys: Hi-GAL, Gould Belt, Cold Cores, HERITAGE, Helga, HerM33es, KINGFISH, and VNGS. The ratio of these two wavelength brightness bands reveals a derived emissivity spectral index statistically close to 1 for all the surveys, which favors the hypothesis of a flattened dust emission spectrum for wavelengths larger than 850 mic.

astro-ph.GA↗

arXiv2024

PDRs4All. V. Modelling the dust evolution across the illuminated edge of the Orion Bar

We study the emission of dust grains within the Orion Bar - a well-known, highly far-UV (FUV)-irradiated PDR. The Orion Bar because of its edge-on geometry provides an exceptional benchmark for characterizing dust evolution and the associated driving processes under varying physical conditions. Our goal is to constrain the local properties of dust by comparing its emission to models. Taking advantage of the recent JWST PDRs4All data, we follow the dust emission as traced by JWST NIRCam (at 3.35 and 4.8 micron) and MIRI (at 7.7, 11.3, 15.0, and 25.5 micron), along with NIRSpec and MRS spectroscopic observations. First, we constrain the minimum size and hydrogen content of carbon nano-grains from a comparison between the observed dust emission spectra and the predictions of the THEMIS dust model coupled to the numerical code DustEM. Using this dust model, we then perform 3D radiative transfer simulations of dust emission with the SOC code and compare to data obtained along well chosen profiles across the Orion Bar. The JWST data allows us, for the first time, to spatially resolve the steep variation of dust emission at the illuminated edge of the Orion Bar PDR. By considering a dust model with carbonaceous nano-grains and submicronic coated silicate grains, we derive unprecedented constraints on the properties of across the Orion Bar. To explain the observed emission profiles with our simulations, we find that the nano-grains must be strongly depleted with an abundance (relative to the gas) 15 times less than in the diffuse ISM. The NIRSpec and MRS spectroscopic observations reveal variations in the hydrogenation of the carbon nano-grains. The lowest hydrogenation levels are found in the vicinity of the illuminating stars suggesting photo-processing while more hydrogenated nano-grains are found in the cold and dense molecular region, potentially indicative of larger grains.

astro-ph.GA↗

arXiv2023

Toward a better understanding of the mid-infrared emission in the LMC

In this paper we aim to constrain for the first time the dust emission in the mid-to-far infrared domain, in the LMC, with the use of the Spitzer IRS and MIPS SED data, combined with Herschel data. We also consider UV extinction predictions derived from modeling. We selected 10 regions observed as part of the SAGE-Spec program, to probe dust properties in various environments (diffuse, molecular and ionized regions). All data were smoothed to the 40arcsec angular resolution. The SEDs were modeled with DustEM models, using the standard Mathis RF, as well as three additional RFs, with stellar clusters ages ranging from 4 Myr to 600 Myr. Standard dust models used to reproduce the Galactic diffuse medium are clearly not able to reproduce the dust emission in the MIR wavelength domain. This analysis evidences the need of adjusting parameters describing the dust size distribution and shows a clear distinct behavior according to the type of environments. In addition, whereas the small grain emission always seems to be negligible at long wavelengths in our Galaxy, the contribution of this small dust component could be more important than expected, in the submm-mm range, in the LMC averaged SED. Properties of the small dust component of the LMC are clearly different from those of our Galaxy. Its abundance, significantly enhanced, could be the result of large grains shattering due to strong shocks or turbulence. In addition, this grain component in the LMC systematically shows smaller grain size in the ionized regions compared to the diffuse medium. Predictions of extinction curves show significantly distinct behaviors depending on the dust models but also from one region to another. Comparison of model predictions with the LMC mean extinction curve shows that no model gives satisfactory agreement using the Mathis radiation field while using a harder radiation field tends to improve the agreement

astro-ph.GA↗

arXiv2022

Low-temperature optical constants of amorphous silicate dust analogues

Cosmic dust models are key ingredients in advancing our understanding of astronomical environments as diverse as interstellar clouds in galaxies, circumstellar envelopes around evolved and young stars, and protoplanetary disks. Such models consist of several dust populations, each with different compositions and size distributions. They may also consider different grain shapes, although most models assume spherical grains. All include a component of silicate dust. The absorption and emission properties of these dust components are calculated from the optical constants of each dust material which have various experimental, phenomenological, and theoretical origins depending on the model. We aim to provide the community with new sets of optical constants for amorphous silicate dust analogues at low temperatures. The analogues consist of four Mg-rich silicate samples of stoichiometry ranging from enstatite to olivine, and of eight samples of Mg and Fe rich silicates with a pyroxene stoichiometry and differing magnesium and iron content. We calculated the optical constants from transmission measurements using the Kramers-Kronig relations, assuming that the grains are small compared to the wavelength and prolate in shape with axis ratios of 1.5 and 2 for the Mg and Fe rich samples, respectively. New optical constants for silicate dust analogues were calculated over the wavelength range from 5 to 800-1000 microns, depending on the sample, and at temperatures of 10, 30, 100, 200, and 300 K.We determined the uncertainties on the derived optical constants based on the assumptions used to calculate them. To facilitate the use of these data in cosmic dust models, we provide optical constants extrapolated outside the measured spectral range into the UV-NIR and mm-cm wavelength ranges, as well as formulae that can be used to interpolate them at any temperature in the range 10 - 300 K.

astro-ph.GA↗

arXiv2019

SCOPE: SCUBA-2 Continuum Observations of Pre-protostellar Evolution - Survey Description and Compact Source Catalogue

We present the first release of the data and compact-source catalogue for the JCMT Large Program SCUBA-2 Continuum Observations of Pre-protostellar Evolution (SCOPE). SCOPE consists of 850-um continuum observations of 1235 Planck Galactic Cold Clumps (PGCCs) made with the Submillimetre Common-User Bolometer Array 2 on the James Clerk Maxwell Telescope. These data are at an angular resolution of 14.4 arcsec, significantly improving upon the 353-GHz resolution of Planck at 5 arcmin, and allowing for a catalogue of 3528 compact sources in 558 PGCCs. We find that the detected PGCCs have significant sub-structure, with 61 per cent of detected PGCCs having 3 or more compact sources, with filamentary structure also prevalent within the sample. A detection rate of 45 per cent is found across the survey, which is 95 per cent complete to Planck column densities of $N_{H_{2}}$ $>$ 5 $\times$ 10$^{21}$ cm$^{-2}$. By positionally associating the SCOPE compact sources with YSOs, the star formation efficiency, as measured by the ratio of luminosity to mass, in nearby clouds is found to be similar to that in the more distant Galactic Plane, with the column density distributions also indistinguishable from each other.

astro-ph.GA↗

arXiv2018

The optical properties of dust: the effects of composition, size, and structure

Grains are determinant for setting the chemical, physical, dynamical, and radiative properties of all the media in which they are present. Their influence depends on the grain composition, size, and geometrical structure which vary throughout the dust lifecycle. Grain growth arises in dense media as traced by an enhancement of the FIR emissivity and by cloudshine and coreshine. We investigate the imprint of the grain characteristics on the dust unpolarised optical properties from the visible to the FIR for isolated grains and aggregates. Using optical constants for both carbonaceous and silicate materials, we derive the absorption and scattering efficiencies, the asymmetry factor of the phase function, the albedo, and the mass opacity, using either Mie theory or DDA. We study the effects of the size, porosity and shape of the grains, and of the monomers constituting the aggregates, on the optical properties. For aggregates we study the influence of the number of monomers and of mixing monomer sizes. Grain structure changes result in variations at all wavelengths. Porosity, grain elongation, and aggregation all produce an increase in the FIR opacity. The spectral dependence of this increase depends on the nature of the material composing the grain: it is independent of the wavelength for insulators but not for conductors. For aggregates, the FIR increase does not depend on the monomer size and saturates for aggregates containing 6 or more monomers. For silicates, the MIR spectral feature at 18 microns is more sensitive to the details of the grain structure than the 10 microns feature. This study provides a basis for understanding the range of variations achievable as a result of varying the grain characteristics. It emphasises the importance of considering the detailed grain structure in determining the dust optical properties and of using exact methods.

astro-ph.GA↗

arXiv2018

French SKA White Book - The French Community towards the Square Kilometre Array

The "Square Kilometre Array" (SKA) is a large international radio telescope project characterised, as suggested by its name, by a total collecting area of approximately one square kilometre, and consisting of several interferometric arrays to observe at metric and centimetric wavelengths. The deployment of the SKA will take place in two sites, in South Africa and Australia, and in two successive phases. From its Phase 1, the SKA will be one of the most formidable scientific machines ever deployed by mankind, and by far the most impressive in terms of data throughput and required computing power. With the participation of almost 200 authors from forty research institutes and six private companies, the publication of this French SKA white paper illustrates the strong involvement in the SKA project of the French astronomical community and of a rapidly growing number of major scientific and technological players in the fields of Big Data, high performance computing, energy production and storage, as well as system integration.

astro-ph.IM↗

arXiv2017

Low-temperature MIR to submillimeter mass absorption coefficient of interstellar dust analogues II: Mg and Fe-rich amorphous silicates

To model the cold dust emission observed in the diffuse interstellar medium, in dense molecular clouds or in cold clumps that could eventually form new stars, it is mandatory to know the physical and spectroscopic properties of this dust and to understand its emission. This work is a continuation of previous studies aiming at providing astronomers with spectroscopic data of realistic cosmic dust analogues for the interpretation of observations. Ferromagnesium amorphous silicate dust analogues were produced with a mean composition close to $\mathrm{Mg_{1-x}Fe_{x}SiO_3}$ with x = 0.1, 0.2, 0.3, 0.4. Part of each sample was annealed at 500$^{\circ}$C for two hours in a reducing atmosphere to modify the oxidation state of iron. We have measured the mass absorption coefficient (MAC) of these ferromagnesium amorphous silicate dust analogues in the spectral domain 30 - 1000 $μ$m for grain temperature in the range 10 - 300 K and at room temperature in the 5 - 40 $μ$m range. The MAC of ferromagnesium samples behaves in the same way as the MAC of pure Mg-rich amorphous silicate samples. In the 30 - 300 K range, the MAC increases with increasing grain temperature whereas in the range 10 - 30 K, we do not see any change of the MAC. The MAC cannot be described by a single power law in $λ^{-β}$. The MAC of all the samples is much higher than the MAC calculated by dust models. The complex behavior of the MAC of amorphous silicates with wavelength and temperature is observed whatever the exact silicate composition (Mg vs. Fe amount). It is a universal characteristic of amorphous materials, and therefore of amorphous cosmic silicates, that should be taken into account in astronomical modeling. The enhanced MAC of the measured samples compared to the MAC calculated for cosmic dust model implies that dust masses are overestimated by the models.

astro-ph.GA↗

arXiv2017

Low temperature MIR to submillimeter mass absorption coefficient of interstellar dust analogues I: Mg-rich glassy silicates

A wealth of data from the Herschel and Planck satellites and now from ALMA, revealing cold dust thermal emission, is available for astronomical environments ranging from interstellar clouds, cold clumps, circumstellar envelops, and protoplanetary disks. The interpretation of these observations relies on the understanding and modeling of cold dust emission and on the knowledge of the dust optical properties. The aim of this work is to provide astronomers with a set of spectroscopic data of realistic interstellar dust analogues that can be used to interpret the observations. Glassy silicates of mean composition (1-x)MgO - xSiO2 with x = 0.35, 0.40 and 0.50 were synthesized. The mass absorption coefficient (MAC) of the samples was measured in the spectral domain 30 - 1000 $μ$m for grain temperature in the range 300 K - 10 K and at room temperature in the 5 - 40 $μ$m domain. We find that the MAC of all samples varies with the grains temperature. In the FIR/submm, and above 30K, the MAC value at a given wavelength increases with the temperature as thermally activated absorption processes appear. The studied materials exhibit different and complex behaviors at long wavelengths (lambda $\geq$ 200 to 700 $μ$m depending on the samples) and the MAC cannot be approximated by a single power law in $λ^{-β}$. These behaviors are attributed to the amorphous nature of dust and to the amount and nature of the defects within this amorphous structure. Above 20 $μ$m, the measured MAC are much higher than the MAC calculated from interstellar silicate dust models indicating that the analogues measured in this study are more emissive than the silicates in cosmic dust models. This has important astrophysical implications because masses are overestimated by the models. Moreover, constraints on elemental abundance of heavy elements in cosmic dust models are relaxed

astro-ph.GA↗

arXiv2015

Galactic cold cores VI. Dust opacity spectral index

The Galactic Cold Cores project has made Herschel observations of 116 fields where the Planck survey has found signs of cold dust emission. The fields contain sources in different environments and different phases of star formation. The dust opacity spectral index beta and the dust colour temperature T are derived using Herschel and Planck data. The relation between beta and T is examined for the whole sample and inside individual fields. Based on IRAS and Planck data, the fields are characterised by a median colour temperature of 16.1 K and a median opacity spectral index of beta=1.84. We observe a clear T-beta anti-correlation. In Herschel observations, constrained at lower resolution by Planck data, the variations follow the column density structure and beta(FIR) can rise to ~2.2 in individual clumps. The Planck 217 GHz band shows a systematic excess that is consistent with a general flattening of the dust emission spectrum at millimetre wavelengths. When fitted separately below and above 700 um, the median spectral index values are beta(FIR) ~ 1.91 and beta(mm) ~ 1.66. The spectral index changes as a function of column density and wavelength. Beta variations are partly masked by temperature gradients and the changes in the intrinsic grain properties may be even greater.

astro-ph.GA↗

arXiv2014

Modeling and predicting the shape of the far-infrared to submillimeter emission in ultra-compact HII regions and cold clumps

Dust properties are very likely affected by the environment in which dust grains evolve. For instance, some analyses of cold clumps (7 K- 17 K) indicate that the aggregation process is favored in dense environments. However, studying warm (30 K-40 K) dust emission at long wavelength ($λ$$>$300 $μ$m) has been limited because it is difficult to combine far infared-to-millimeter (FIR-to-mm) spectral coverage and high angular resolution for observations of warm dust grains. Using Herschel data from 70 to 500 $μ$m, which are part of the Herschel infrared Galactic (Hi-GAL) survey combined with 1.1 mm data from the Bolocam Galactic Plane Survey (BGPS), we compared emission in two types of environments: ultra-compact HII (UCHII) regions, and cold molecular clumps (denoted as cold clumps). With this comparison we tested dust emission models in the FIR-to-mm domain that reproduce emission in the diffuse medium, in these two environments (UCHII regions and cold clumps). We also investigated their ability to predict the dust emission in our Galaxy. We determined the emission spectra in twelve UCHII regions and twelve cold clumps, and derived the dust temperature (T) using the recent two-level system (TLS) model with three sets of parameters and the so-called T-$β$ (temperature-dust emissvity index) phenomenological models, with $β$ set to 1.5, 2 and 2.5. We tested the applicability of the TLS model in warm regions for the first time. This analysis indicates distinct trends in the dust emission between cold and warm environments that are visible through changes in the dust emissivity index. However, with the use of standard parameters, the TLS model is able to reproduce the spectral behavior observed in cold and warm regions, from the change of the dust temperature alone, whereas a T-$β$ model requires $β$ to be known.

astro-ph.GA↗

arXiv2013

Deuterated water in the solar-type protostars NGC 1333 IRAS 4A and IRAS 4B

Aims. The aim of this paper is to study deuterated water in the solar-type protostars NGC1333 IRAS4A and IRAS4B, to compare their HDO abundance distribution with other star-forming regions, and to constrain their HDO/H2O ratios. Methods. Using the Herschel/HIFI instrument as well as ground-based telescopes, we observed several HDO lines covering a large excitation range (Eup/k=22-168 K) towards these protostars and an outflow position. Non-LTE radiative transfer codes were then used to determine the HDO abundance profiles in these sources. Results. The HDO fundamental line profiles show a very broad component, tracing the molecular outflows, in addition to a narrower emission component and a narrow absorbing component. In the protostellar envelope of NGC1333 IRAS4A, the HDO inner (T>100 K) and outer (T<100 K) abundances with respect to H2 are estimated at 7.5x10^{-9} and 1.2x10^{-11}, respectively, whereas, in NGC1333 IRAS4B, they are 1.0x10^{-8} and 1.2x10^{-10}, respectively. Similarly to the low-mass protostar IRAS16293-2422, an absorbing outer layer with an enhanced abundance of deuterated water is required to reproduce the absorbing components seen in the fundamental lines at 465 and 894 GHz in both sources. This water-rich layer is probably extended enough to encompass the two sources as well as parts of the outflows. In the outflows emanating from NGC1333 IRAS4A, the HDO column density is estimated at about (2-4)x10^{13} cm^{-2}, leading to an abundance of about (0.7-1.9)x10^{-9}. An HDO/H2O ratio between 7x10^{-4} and 9x10^{-2} is derived in the outflows. In the warm inner regions of these two sources, we estimate the HDO/H2O ratios at about 1x10^{-4}-4x10^{-3}. This ratio seems higher (a few %) in the cold envelope of IRAS4A, whose possible origin is discussed in relation to formation processes of HDO and H2O.

astro-ph.GA↗

arXiv2013

Heavy water stratification in a low-mass protostar

Context: Despite the low elemental deuterium abundance in the Galaxy, enhanced molecular D/H ratios have been found in the environments of low-mass star-forming regions and, in particular, the Class 0 protostar IRAS 16293-2422. Aims: The key program Chemical HErschel Surveys of Star forming regions (CHESS) aims at studying the molecular complexity of the interstellar medium. The high sensitivity and spectral resolution of the Herschel/HIFI instrument provide a unique opportunity to observe the fundamental 1_{1,1}-0_{0,0} transition of ortho-D2O at 607 GHz and the higher energy 2_{1,2}-1_{0,1} transition of para-D2O at 898 GHz, both of which are inaccessible from the ground. Methods: The ortho-D2O transition at 607 GHz was previously detected. We present in this paper the first tentative detection for the para-D2O transition at 898 GHz. The spherical Monte Carlo radiative transfer code RATRAN was used to reproduce the observed line profiles of D2O with the same method that was used to reproduce the HDO and H2-18O line profiles in IRAS 16293-2422. Results: As for HDO, the absorption component seen on the D2O lines can only be reproduced by adding an external absorbing layer, possibly created by the photodesorption of the ices at the edges of the molecular cloud. The D2O column density is found to be about 2.5e12 cm^{-2} in this added layer, leading to a D2O/H2O ratio of about 0.5%. At a 3 sigma uncertainty, upper limits of 0.03% and 0.2% are obtained for this ratio in the hot corino and the colder envelope of IRAS 16293-2422, respectively. Conclusions: The deuterium fractionation derived in our study suggests that the ices present in IRAS 16293-2422 formed on warm dust grains (~15-20 K) in dense (~1e4-5e4 cm^{-3}) translucent clouds. These results allow us to address the earliest phases of star formation and the conditions in which ices form.

astro-ph.GA↗

arXiv2012

Modelling the dust emission from dense interstellar clouds: disentangling the effects of radiative transfer and dust properties

With Planck and Herschel, we now have the spectral coverage and angular resolution required to observe dense and cold molecular clouds. As these clouds are optically thick at short wavelength but optically thin at long wavelength, it is tricky to conclude anything about dust properties without a proper treatment of the radiative transfer (RT). Our aim is to disentangle the effects of RT and of dust properties on the variations in the dust emission to provide observers with keys to analyse the emission arising from dense clouds. We model cylindrical clouds, illuminated by the ISRF, and carry out full RT calculations. Dust temperatures are solved using DustEM for amorphous carbons and silicates, grains coated with carbon mantles, and mixed aggregates of carbon and silicate. We allow variations of the grain optical properties with wavelength and temperature. We determine observed colour temperatures, T, and emissivity spectral indices, beta, by fitting the dust emission with modified blackbodies, to compare our models with observations. RT effects can neither explain the low T nor the increased submm emissivity measured at the centre of dense clouds, nor the observed beta-T anti-correlation. Adding noise to the modelled data, we show that it is not likely to be the unique explanation for the beta-T anti-correlation observed in starless clouds. It may be explained by intrinsic variations in the grain optical properties with temperature. As for the increased submm emissivity and the low T, they have to originate in variations in the grain optical properties, probably caused by their growth to form porous aggregates. We find it difficult to track back the nature of grains from the spectral variations in their emission. Finally, the column density is underestimated when determined with blackbody fitting because of the discrepancy between T and the true dust temperature at the cloud centre.

astro-ph.GA↗

arXiv2011

Low temperature FIR and submm mass absorption coefficient of interstellar silicate dust analogues

Cold dust grains emission in the FIR/submm is usually expressed as a modified black body law in which the dust mass absorption coefficient (MAC), is described with a temperature- and wavelength-independent emissivity spectral index, beta. However, numerous data from space and balloon-born missions and recently from Herschel and Planck show that dust emission is not well understood, as revealed by the observed anti-correlation of beta with the grain temperature. In order to give astronomers the necessary data to interpret FIR/submm observations, we synthesised analogues of interstellar amorphous and crystalline silicate grains, rich in Mg and Ca, and having stiochiometry of olivine and pyroxene and measured their MAC, in the 100-1000/1500 \mum range for grain temperatures varying from 300 to 10 K. We find that the grain MAC decreases when the grain temperature decreases and that the local spectral index, beta, defined as the slope of the MAC curve, is anti-correlated with the grain temperature. These variations, which are not observed in the crystallised samples, are related to the amorphous nature of the samples. In addition, the spectral shape of the MAC is complex: at short wavelengths (lambda < 500/700 \mum), beta is in the range 1.6 - 2.1 for all grain temperature and grain composition whereas at longer wavelengths (lambda > 500/700 \mum), beta < 2 for samples with a pyroxene stoichiometry and beta > 2 for samples with an olivine stoichiometry. Hence, the simplifying asymptotic expression based on a single temperature- and wavelength-independent spectral index used by astronomers is not appropriate to describe the dust MAC and thus the dust emission, and may induce significant errors on the derived parameters such as the dust mass and the dust physical and chemical properties. Instead, dust emission models should use the dust MAC as a function of wavelength and temperature.

astro-ph.GA↗

arXiv2010

The methanol lines and hot core of OMC2-FIR4, an intermediate-mass protostar, with Herschel-HIFI

In contrast with numerous studies on the physical and chemical structure of low- and high-mass protostars, much less is known about their intermediate-mass counterparts, a class of objects that could help to elucidate the mechanisms of star formation on both ends of the mass range. We present the first results from a rich HIFI spectral dataset on an intermediate-mass protostar, OMC2-FIR4, obtained in the CHESS (Chemical HErschel SurveyS of star forming regions) key programme. The more than 100 methanol lines detected between 554 and 961 GHz cover a range in upper level energy of 40 to 540 K. Our physical interpretation focusses on the hot core, but likely the cold envelope and shocked regions also play a role in reality, because an analysis of the line profiles suggests the presence of multiple emission components. An upper limit of 10^-6 is placed on the methanol abundance in the hot core, using a population diagram, large-scale source model and other considerations. This value is consistent with abundances previously seen in low-mass hot cores. Furthermore, the highest energy lines at the highest frequencies display asymmetric profiles, which may arise from infall around the hot core.

astro-ph.GA↗

arXiv2010

Herschel/HIFI observations of spectrally resolved methylidyne signatures toward the high-mass star-forming core NGC6334I

In contrast to extensively studied dense star-forming cores, little is known about diffuse gas surrounding star-forming regions. We study molecular gas in the high-mass star-forming region NGC6334I, which contains diffuse, quiescent components that are inconspicuous in widely used molecular tracers such as CO. We present Herschel/HIFI observations of CH toward NGC6334I observed as part of the CHESS key program. HIFI resolves the hyperfine components of its J=3/2-1/2 transition, observed in both emission and absorption. The CH emission appears close to the systemic velocity of NGC6334I, while its measured linewidth of 3 km/s is smaller than previously observed in dense gas tracers such as NH3 and SiO. The CH abundance in the hot core is 7 10^-11, two to three orders of magnitude lower than in diffuse clouds. While other studies find distinct outflows in, e.g., CO and H2O toward NGC6334I, we do not detect outflow signatures in CH. To explain the absorption signatures, at least two absorbing components are needed at -3.0 and +6.5 km/s with N(CH)=7 10^13 and 3 10^13 cm^-2. Two additional absorbing clouds are found at +8.0 and 0.0 km/s, both with N(CH)=2 10^13 cm^-2. Turbulent linewidths for the four absorption components vary between 1.5 and 5.0 km/s in FWHM. We constrain physical properties of our CH clouds by matching our CH absorbers with other absorption signatures. In the hot core, molecules such as H2O and CO trace gas that is heated and dynamically influenced by outflow activity, whereas CH traces more quiescent material. The four CH absorbers have column densities and turbulent properties consistent with diffuse clouds: two are located near NGC6334, and two are unrelated foreground clouds. Local density and dynamical effects influence the chemical composition of physical components of NGC6334, causing some components to be seen in CH but not in other tracers, and vice versa.

astro-ph.GA↗