SearcharxivSearch

arXiv subjects

K. Doi

Publications and source records attributed to K. Doi.

10 recordsLinked to original sources

Turbulence in protoplanetary disks: A systematic analysis of dust settling in 33 disks

The level of dust vertical settling and radial dust concentration in disks is of critical importance for understanding the efficiency of planet formation. We present the first uniform analysis of the vertical extent of millimeter dust for a representative sample of 33disks. We used radiative transfer modeling of archival high-angular-resolution (<=0.1") ALMA dust observations of inclined and ringed disks to estimate their vertical dust scale height, which was compared to estimated gas scale heights to characterize the level of vertical sedimentation. In all 23systems for which constraints could be obtained, we find that the outer parts of the disks are vertically settled. 5disks allow for the characterization of the dust scale height both within and outside approximately half the dust disk radius, showing a lower limit on their dust heights at smaller radii. This implies that the ratio between vertical turbulence and the Stokes number, $\alpha_z/\St$, decreases radially in these sources. For 21rings in 15disks, we also constrained the level of radial concentration of the dust, finding that about half of the rings are compatible with strong radial trapping. In most of these rings, vertical turbulence is found to be comparable to or weaker than radial turbulence, which is incompatible with the turbulence generated by the vertical shear instability at these locations. We further used our dust settling constraints to estimate the turbulence level under the assumption that the dust size is limited by fragmentation, finding typical upper limits around $\alpha_\text{frag}\leq10^{-3}$. In a few sources, we find that turbulence cannot be the main source of accretion. In the context of pebble accretion, we identify several disk regions that have upper limits on their dust concentration that would allow core formation to proceed efficiently, even at wide orbital distances outside of 50au.

astro-ph.SR

An arm length stabilization system for KAGRA and future gravitational-wave detectors

Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner.

physics.ins-det

Application of the independent component analysis to the iKAGRA data

We apply the independent component analysis (ICA) to the real data from a gravitational wave detector for the first time. Specifically we use the iKAGRA data taken in April 2016, and calculate the correlations between the gravitational wave strain channel and 35 physical environmental channels. Using a couple of seismic channels which are found to be strongly correlated with the strain, we perform ICA. Injecting a sinusoidal continuous signal in the strain channel, we find that ICA recovers correct parameters with enhanced signal-to-noise ratio, which demonstrates usefulness of this method. Among the two implementations of ICA used here, we find the correlation method yields the optimal result for the case environmental noises act on the strain channel linearly.

astro-ph.IM

First cryogenic test operation of underground km-scale gravitational-wave observatory KAGRA

KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic motion at low frequencies and high stability of the detector. Another advantage is that it cools down the sapphire test mass mirrors to cryogenic temperatures to reduce thermal noise. In April-May 2018, we have operated a 3-km Michelson interferometer with a cryogenic test mass for 10 days, which was the first time that km-scale interferometer was operated at cryogenic temperatures. In this article, we report the results of this "bKAGRA Phase 1" operation. We have demonstrated the feasibility of 3-km interferometer alignment and control with cryogenic mirrors.

astro-ph.IM

Vibration isolation system with a compact damping system for power recycling mirrors of KAGRA

A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A suspension of the Type-Bp system passively isolates an optic from seismic vibration using three main pendulum stages equipped with two vertical vibration isolation systems. A compact reaction mass around each of the main stages allows for achieving sufficient damping performance with a simple feedback as well as vibration isolation ratio. Three Type-Bp systems were installed in KAGRA, and were proved to satisfy the requirements on the damping performance, and also on estimated residual displacement of the optics.

physics.ins-det

KAGRA: 2.5 Generation Interferometric Gravitational Wave Detector

The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Telescope), a new GW detector with two 3-km baseline arms arranged in the shape of an "L", located inside the Mt. Ikenoyama, Kamioka, Gifu, Japan. KAGRA's design is similar to those of the second generations such as Advanced LIGO/Virgo, but it will be operating at the cryogenic temperature with sapphire mirrors. This low temperature feature is advantageous for improving the sensitivity around 100 Hz and is considered as an important feature for the third generation GW detector concept (e.g. Einstein Telescope of Europe or Cosmic Explorer of USA). Hence, KAGRA is often called as a 2.5 generation GW detector based on laser interferometry. The installation and commissioning of KAGRA is underway and its cryogenic systems have been successfully tested in May, 2018. KAGRA's first observation run is scheduled in late 2019, aiming to join the third observation run (O3) of the advanced LIGO/Virgo network. In this work, we describe a brief history of KAGRA and highlights of main feature. We also discuss the prospects of GW observation with KAGRA in the era of O3. When operating along with the existing GW detectors, KAGRA will be helpful to locate a GW source more accurately and to determine the source parameters with higher precision, providing information for follow-up observations of a GW trigger candidate.

gr-qc

10~Mb/s quantum key distribution

We report the first quantum key distribution (QKD) systems capable of delivering sustainable, real-time secure keys continuously at rates exceeding 10 Mb/s. To achieve such rates, we developed high speed post-processing modules, achieving maximum data throughputs of 60 MC/s, 55 Mb/s, and 108 Mb/s for standalone operation of sifting, error correction and privacy amplification modules, respectively. The photonic layer of the QKD systems features high-speed single photon detectors based on self-differencing InGaAs avalanche photodiodes, phase encoding using asymmetric Mach-Zehnder interferometer, and active stabilization of the interferometer phase and photon polarisation. An efficient variant of the decoy-state BB84 protocol is implemented for security analysis, with a large dataset size of $10^8$ bits selected to mitigate finite-size effects. Over a 2 dB channel, a record secure key rate of 13.72 Mb/s has been achieved averaged over 4.4 days of operation. We confirm the robustness and long-term stability on a second QKD system continuously running for 1 month without any user intervention.

quant-ph

Construction of KAGRA: an Underground Gravitational Wave Observatory

Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferometer operation has been installed and the first test run was accomplished in March and April of 2016 with a rather simple configuration. The initial configuration of KAGRA is named {\it iKAGRA}. In this paper, we summarize the construction of KAGRA, including the study of the advantages and challenges of building an underground detector and the operation of the iKAGRA interferometer together with the geophysics interferometer that has been constructed in the same tunnel.

gr-qc

The status of KAGRA underground cryogenic gravitational wave telescope

KAGRA is a 3-km interferometric gravitational wave telescope located in the Kamioka mine in Japan. It is the first km-class gravitational wave telescope constructed underground to reduce seismic noise, and the first km-class telescope to use cryogenic cooling of test masses to reduce thermal noise. The construction of the infrastructure to house the interferometer in the tunnel, and the initial phase operation of the interferometer with a simple 3-km Michelson configuration have been completed. The first cryogenic operation is expected in 2018, and the observing runs with a full interferometer are expected in 2020s. The basic interferometer configuration and the current status of KAGRA are described.

gr-qc

Simultaneous magneto-optical trapping of lithium and ytterbium atoms towards production of ultracold polar molecules

We have successfully implemented the first simultaneous magneto-optical trapping (MOT) of lithium ($^6$Li) and ytterbium ($^{174}$Yb) atoms, towards production of ultracold polar molecules of LiYb. For this purpose, we developed the dual atomic oven which contains both atomic species as an atom source and successfully observed the spectra of the Li and Yb atoms in the atomic beams from the dual atomic oven. We constructed the vacuum chamber including the glass cell with the windows made of zinc selenium (ZnSe) for the CO$_2$ lasers, which are the useful light sources of optical trapping for evaporative and sympathetic cooling. Typical atom numbers and temperatures in the compressed MOT are 7$\times10^3$ atoms, 640 $\mu$K for $^6$Li, 7$\times10^4$ atoms and 60 $\mu$K for $^{174}$Yb, respectively.

physics.atom-ph