arXiv subjects

K. Endo

Publications and source records attributed to K. Endo.

12 recordsLinked to original sources

arXiv2026

The performance of the TA$\times$4 surface detector array: 4.3 years of the first-half expansion

The Telescope Array (TA) experiment aims to reveal the origin of ultra-high-energy cosmic rays (UHECRs) by observing air showers using surface detectors (SDs), which spread over an area of approximately 700 km$^2$, and fluorescence detectors (FDs) viewing the skies above the SD array. The TA experiment has been observing UHECRs since 2008, and has reported an indication of clustering in the arrival directions of cosmic-ray events with energy greater than 57 EeV. To improve the exposure for anisotropy studies of UHECRs, the TA$\times$4 upgrade was designed to expand the observational area by approximately 2,000 km$^2$ with 500 additional SDs. Half of the planned upgrade, consisting of 257 SDs, was completed, and the newly installed array began operation in 2019. In addition to the expanded SD array, two FD stations were constructed for the TA$\times$4 experiment. In this paper, we present a study of the performance of the expanded SD array, including the energy resolution, angular resolution, and effective aperture, over the first 4.3 years of data acquisition. While the effective aperture varied initially due to changing detector states, it has stabilized since June 2023 with more than 90% operational SDs. Furthermore, a new inter-tower trigger system was implemented to connect six new communication towers to form two geographically separated arrays, increasing the effective aperture. The time variation of this effective aperture, the resulting total exposure of approximately 3,500 km$^2$ sr yr, and a comparison with the original TA SD array are presented to demonstrate the performance of the expanded array.

astro-ph.IM↗

arXiv2026

Cosmic ray mass composition measurement in the energy range from $10^{16.5}$ eV to $10^{18.5}$ eV observed with the TALE hybrid detector

We report on the cosmic ray mass composition measured by the Telescope Array Low-energy Extension (TALE) hybrid detector. The TALE detector consists of a fluorescence detector (FD) station with 10 FD telescopes located at the Telescope Array (TA) Middle Drum FD Station (itself made up of 14 FD telescopes), and a surface detector (SD) array of scintillators. The array consists of 40 SDs with 400 m spacing and 40 SDs with 600 m spacing. In this paper, we present results on the measurement of the depth of shower maxima ($X_\mathrm{max}$) in the energy range from $10^{16.5}$ eV to $10^{18.5}$ eV collected over five years of the TALE hybrid detector. The $X_\mathrm{max}$ distributions were analyzed and compared with Monte Carlo simulations of proton, helium, nitrogen, and iron primaries, using the QGSJet II-04 hadronic interaction model. Our results indicate that the elongation rate of the mean $X_\mathrm{max}$, which is defined as the slope of $\langle X_\mathrm{max} \rangle$ versus cosmic ray energy, exhibits a break around $10^{17}$ eV. Up to this energy, the composition becomes increasingly heavy, characterized by a growing dominance of heavy nuclei and a steadily decreasing fraction of light primaries. Beyond this energy, the proton fraction increases significantly with energy. These findings suggest a transition from Galactic to extra-Galactic cosmic ray sources around the so-called second knee.

astro-ph.HE↗

arXiv2025

Searching for EeV photons with Telescope Array Surface Detector and neural networks

Ultra-high-energy photons play an important role in probing astrophysical models and beyond-Standard-Model scenarios. We report updated limits on the diffuse photon flux using Telescope Array's Surface Detector data collected over 14 years of operation. Our method employs a neural network classifier to effectively distinguish between proton-induced and photon-induced events. The input data include both reconstructed composition-sensitive parameters and raw time-resolved signals registered by the Surface Detector stations. To mitigate biases from Monte Carlo simulations, we fine-tune the network with a subset of experimental data. The number of observed photon candidates is found to be consistent with the expected hadronic background, yielding upper limits on photon flux $\Phi_\gamma(E_\gamma > 10^{19} \text{eV}) < 2.3 \cdot 10^{-3} $, and $\Phi_\gamma(E_\gamma > 10^{20} \text{eV}) < 3.0 \cdot 10^{-4} $ $ (\text{km}^2 \cdot \text{sr} \cdot \text{yr})^{-1} $.

astro-ph.GA↗

arXiv2025

Decadal upgrade strategy for KAGRA toward post-O5 gravitational-wave astronomy

The KAGRA Collaboration has investigated a ten-year upgrade strategy for the KAGRA gravitational wave detector, considering a total of 14 upgrade options that vary in mirror mass, quantum noise reduction techniques, and the quality of cryogenic suspensions. We evaluated the scientific potential of these configurations with a focus on key targets such as parameter estimation of compact binary coalescences, binary neutron star post-merger signals, and continuous gravitational waves. Rather than aiming to improve all science cases uniformly, we prioritized those most sensitive to the detector configuration. Technical feasibility was assessed based on required hardware developments, associated R\&D efforts, cost, and risk. Our study finds that a high-frequency upgrade plan that enhances sensitivity over a broad frequency range above ~200 Hz offers the best balance between scientific return and technical feasibility. Such an upgrade would enable sky localization of binary neutron star mergers at 100 Mpc to better than 0.5 deg$^2$ in a LIGO-Virgo-KAGRA network, and improve the measurement precision of tidal deformability parameter by approximately 10% at median, compared to a network without KAGRA.

gr-qc↗

arXiv2025

Identification of Noise-Associated Glitches in KAGRA O3GK with Hveto

Transient noise ("glitches") in gravitational wave detectors can mimic or obscure true signals, significantly reducing detection sensitivity. Identifying and excluding glitch-contaminated data segments is therefore crucial for enhancing the performance of gravitational-wave searches. We perform a noise analysis of the KAGRA data obtained during the O3GK observation. Our analysis is performed with hierarchical veto (Hveto) which identifies noises based on the statistical time correlation between the main channel and the auxiliary channels. A total of 2,531 noises were vetoed by 28 auxiliary channels with the configuration (i.e., signal-to-noise threshold set to 8) that we chose for Hveto. We identify vetoed events as glitches on the spectrogram via visual examination after plotting them with Q-transformation. By referring to the Gravity Spy project, we categorize 2,354 glitches into six types: blip, helix, scratchy, and scattered light, which correspond to those listed in Gravity Spy, and dot and line, which are not found in the Gravity Spy classification and are thus named based on their spectrogram morphology in KAGRA data. The remaining 177 glitches are determined not to belong to any of these six types. We show how the KAGRA glitch types are related to each subsystem of KAGRA. To investigate the possible correlation between the main channel and the round winner - an auxiliary channel statistically associated with the main channel for vetoing purposes - we visually examine the similarity or difference in the glitch pattern on the spectrogram. We compare the qualitative correlation found through visual examination with coherence, which is known to provide quantitative measurement for the correlation between the main channel and each auxiliary channel. Our comprehensive noise analysis will help improve the data quality of KAGRA by applying it to future KAGRA observation data.

gr-qc↗

arXiv2024

Observation of Declination Dependence in the Cosmic Ray Energy Spectrum

We report on an observation of the difference between northern and southern skies of the ultrahigh energy cosmic ray energy spectrum with a significance of ${\sim}8\sigma$. We use measurements from the two largest experiments$\unicode{x2014}$the Telescope Array observing the northern hemisphere and the Pierre Auger Observatory viewing the southern hemisphere. Since the comparison of two measurements from different observatories introduces the issue of possible systematic differences between detectors and analyses, we validate the methodology of the comparison by examining the region of the sky where the apertures of the two observatories overlap. Although the spectra differ in this region, we find that there is only a $1.8\sigma$ difference between the spectrum measurements when anisotropic regions are removed and a fiducial cut in the aperture is applied.

astro-ph.HE↗

arXiv2017

Shape dependence of resistance force exerted on an obstacle placed in a gravity-driven granular silo flow

Resistance force exerted on an obstacle in a gravity-driven slow granular silo flow is studied by experiments and numerical simulations. In a two-dimensional granular silo, an obstacle is placed just above the exit. Then, steady discharge flow is made and its flow rate can be controlled by the width of exit and the position of obstacle. During the discharge of particles, flow rate and resistance force exerting on the obstacle are measured. Using the obtained data, a dimensionless number characterizing the force balance in granular flow is defined by the relation between the discharge flow rate and resistance-force decreasing rate. The dimensionless number is independent of flow rate. Rather, we find the weak shape dependence of the dimensionless number. This tendency is a unique feature for the resistance force in granular silo flow. It characterizes the effective flow width interacting with the obstacle in granular silo flow.

cond-mat.soft↗

arXiv2017

Obstacle-shape effect in a two-dimensional granular silo flow field

We conducted simple experiment and numerical simulation of two-dimensional granular discharge flow driven by gravity under the influence of an obstacle. According to the previous work (Zuriguel {\it et al.,\,Phys.\,Rev.\,Lett.}\,{\bf 107}: 278001, 2011), the clogging of granular discharge flow can be suppressed by putting a circular obstacle at a proper position. In order to investigate the details of obstacle effect in granular flow, we focused on particle dynamics in this study. From the experimental and numerical data, we found that the obstacle remarkably affects the horizontal-velocity distribution and packing fraction at the vicinity of the exit. In addition to the circular obstacle, we utilized triangular, inverted-triangular, and horizontal-bar obstacles to discuss the obstacle-shape effect in granular discharge flow. Based on the investigation of dynamical quantities such as velocity distributions, granular temperature, and volume fraction, we found that the triangular obstacle or horizontal bar could be very effective to prevent the clogging. From the obtained result, we consider that the detouring of particles around the obstacle and resultant low packing fraction at the exit region effectively prevent the clogging in a certain class of granular discharge flow.

cond-mat.soft↗

arXiv2016

Statistical properties of gravity-driven granular discharge flow under the influence of an obstacle

Two-dimensional granular discharge flow driven by gravity under the influence of an obstacle is experimentally investigated. A horizontal exit of width $W$ is opened at the bottom of vertical Hele-Shaw cell filled with stainless-steel particles to start the discharge flow. In this experiment, a circular obstacle is placed in front of the exit. Thus, the distance between the exit and obstacle $L$ is also an important parameter. During the discharge, granular-flow state is acquired by a high-speed camera. The bulk discharge-flow rate is also measured by load cell sensors. The obtained high-speed-image data are analyzed to clarify the particle-level granular-flow dynamics. Using the measured data, we find that the obstacle above the exit affects the granular-flow field. Specifically, the existence of obstacle results in large horizontal granular temperature and small packing fraction. This tendency becomes significant when $L$ is smaller than approximately 6$D_g$ when $W \simeq 4 D_g$, where $D_g$ is diameter of particles.

cond-mat.soft↗

arXiv2015

Measurement and comparison of individual external doses of high-school students living in Japan, France, Poland and Belarus -- the "D-shuttle" project --

Twelve high schools in Japan (of which six are in Fukushima Prefecture), four in France, eight in Poland and two in Belarus cooperated in the measurement and comparison of individual external doses in 2014. In total 216 high-school students and teachers participated in the study. Each participant wore an electronic personal dosimeter "D-shuttle" for two weeks, and kept a journal of his/her whereabouts and activities. The distributions of annual external doses estimated for each region overlap with each other, demonstrating that the personal external individual doses in locations where residence is currently allowed in Fukushima Prefecture and in Belarus are well within the range of estimated annual doses due to the background radiation level of other regions/countries.

physics.med-ph↗

arXiv2010

RASOR: An advanced instrument for soft x-ray reflectivity and diffraction

We report the design and construction of a novel soft x-ray diffractometer installed at Diamond Light Source. The beamline endstation RASOR is constructed for general users and designed primarily for the study of single crystal diffraction and thin film reflectivity. The instrument is comprised of a limited three circle (θ, 2θ, χ) diffractometer with an additional removable rotation (ϕ) stage. It is equipped with a liquid helium cryostat, and post-scatter polarization analysis. Motorised motions are provided for the precise positioning of the sample onto the diffractometer centre of rotation, and for positioning the centre of rotation onto the x-ray beam. The functions of the instrument have been tested at Diamond Light Source, and initial test measurements are provided, demonstrating the potential of the instrument.

cond-mat.str-el↗

arXiv2000

Detailed analysis of scanning tunneling microscopy images of the Si(001) reconstructed surface with buckled dimers

The adequate interpretation of scanning tunneling microscopy (STM) images of the clean Si(001) surface is presented. We have performed both STM observations and {\it ab initio} simulations of STM images for buckled dimers on the clean Si(001) surface. By comparing experimental results with theoretical ones, it is revealed that STM images depend on the sample bias and the tip-sample separation. This enables us to elucidate the relationship between the corrugation in STM images and the atomic structure of buckled dimers. Moreover, to elucidate these changes, we analyze details of the spatial distributions of the $π$, $π^{\ast}$ surface states and $σ$, $σ^{\ast}$ Si-Si bond states in the local density of states which contribute to STM images.

cond-mat.mtrl-sci↗