Searcharxiv⌕ Search

arXiv subjects

K. Fanning

Publications and source records attributed to K. Fanning.

52 records · Page 3Linked to original sources

HOD-Dependent Systematics in Emission Line Galaxies for the DESI 2024 BAO analysis

The Dark Energy Spectroscopic Instrument (DESI) will provide precise measurements of Baryon Acoustic Oscillations (BAO) to constrain the expansion history of the Universe and set stringent constraints on dark energy. Therefore, precise control of the global error budget due to various systematic effects is required for the DESI 2024 BAO analysis. In this work, we focus on the robustness of the BAO analysis against the Halo Occupation Distribution (HOD) modeling for the Emission Line Galaxy (ELG) tracer. Based on a common dark matter simulation, our analysis relies on HOD mocks tuned to early DESI data, namely the One-Percent survey data. To build the mocks, we use several HOD models for the ELG tracer as well as extensions to the baseline HOD models. Among these extensions, we consider distinct recipes for galactic conformity and assembly bias. We perform two independent analyses in the Fourier space and in the configuration space. We recover the BAO signal from two-point measurements after performing reconstruction on our mocks. Additionally, we also apply the control variates technique to reduce sample variance noise. Our BAO analysis can recover the isotropic BAO parameter $α_\text{iso}$ within 0.1\% and the Alcock Paczynski parameter $α_\text{AP}$ within 0.3\%. Overall, we find that our systematic error due to the HOD dependence is below 0.17\%, with the Fourier space analysis being more robust against the HOD systematics. We conclude that our analysis pipeline is robust enough against the HOD systematics for the ELG tracer in the DESI 2024 BAO analysis.

astro-ph.CO↗

Identifying Quasars from the DESI Bright Galaxy Survey

The Dark Energy Spectroscopic Instrument (DESI) cosmology survey includes a Bright Galaxy Survey (BGS) which will yield spectra for over ten million bright galaxies (r<20.2 AB mag). The resulting sample will be valuable for both cosmological and astrophysical studies. However, the star/galaxy separation criterion implemented in the nominal BGS target selection algorithm excludes quasar host galaxies in addition to bona fide stars. While this excluded population is comparatively rare (~3-4 per square degrees), it may hold interesting clues regarding galaxy and quasar physics. Therefore, we present a target selection strategy that was implemented to recover these missing active galactic nuclei (AGN) from the BGS sample. The design of the selection criteria was both motivated and confirmed using spectroscopy. The resulting BGS-AGN sample is uniformly distributed over the entire DESI footprint. According to DESI survey validation data, the sample comprises 93% quasi-stellar objects (QSOs), 3% narrow-line AGN or blazars with a galaxy contamination rate of 2% and a stellar contamination rate of 2%. Peaking around redshift z=0.5, the BGS-AGN sample is intermediary between quasars from the rest of the BGS and those from the DESI QSO sample in terms of redshifts and AGN luminosities. The stacked spectrum is nearly identical to that of the DESI QSO targets, confirming that the sample is dominated by quasars. We highlight interesting small populations reaching z>2 which are either faint quasars with nearby projected companions or very bright quasars with strong absorption features including the Lyman-apha forest, metal absorbers and/or broad absorption lines.

astro-ph.GA↗

DESI 2024 III: Baryon Acoustic Oscillations from Galaxies and Quasars

We present the DESI 2024 galaxy and quasar baryon acoustic oscillations (BAO) measurements using over 5.7 million unique galaxy and quasar redshifts in the range 0.1<z<2.1. Divided by tracer type, we utilize 300,017 galaxies from the magnitude-limited Bright Galaxy Survey with 0.1<z<0.4, 2,138,600 Luminous Red Galaxies with 0.4<z<1.1, 2,432,022 Emission Line Galaxies with 0.8<z<1.6, and 856,652 quasars with 0.8<z<2.1, over a ~7,500 square degree footprint. The analysis was blinded at the catalog-level to avoid confirmation bias. All fiducial choices of the BAO fitting and reconstruction methodology, as well as the size of the systematic errors, were determined on the basis of the tests with mock catalogs and the blinded data catalogs. We present several improvements to the BAO analysis pipeline, including enhancing the BAO fitting and reconstruction methods in a more physically-motivated direction, and also present results using combinations of tracers. We present a re-analysis of SDSS BOSS and eBOSS results applying the improved DESI methodology and find scatter consistent with the level of the quoted SDSS theoretical systematic uncertainties. With the total effective survey volume of ~ 18 Gpc$^3$, the combined precision of the BAO measurements across the six different redshift bins is ~0.52%, marking a 1.2-fold improvement over the previous state-of-the-art results using only first-year data. We detect the BAO in all of these six redshift bins. The highest significance of BAO detection is $9.1σ$ at the effective redshift of 0.93, with a constraint of 0.86% placed on the BAO scale. We find our measurements are systematically larger than the prediction of Planck-2018 LCDM model at z<0.8. We translate the results into transverse comoving distance and radial Hubble distance measurements, which are used to constrain cosmological models in our companion paper [abridged].

astro-ph.CO↗

Constraining primordial non-Gaussianity from the large scale structure two-point and three-point correlation functions

Surveys of cosmological large-scale structure (LSS) are sensitive to the presence of local primordial non-Gaussianity (PNG), and may be used to constrain models of inflation. Local PNG, characterized by fNL, the amplitude of the quadratic correction to the potential of a Gaussian random field, is traditionally measured from LSS two-point and three-point clustering via the power spectrum and bi-spectrum. We propose a framework to measure fNL using the configuration space two-point correlation function (2pcf) monopole and three-point correlation function (3pcf) monopole of survey tracers. Our model estimates the effect of the scale-dependent bias induced by the presence of PNG on the 2pcf and 3pcf from the clustering of simulated dark matter halos. We describe how this effect may be scaled to an arbitrary tracer of the cosmological matter density. The 2pcf and 3pcf of this tracer are measured to constrain the value of fNL. Using simulations of luminous red galaxies observed by the Dark Energy Spectroscopic Instrument (DESI), we demonstrate the accuracy and constraining power of our model, and forecast the ability to constrainfNL to a precision of sigma(fNL) = 22 with one year of DESI survey data.

astro-ph.CO↗

Survey Operations for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) survey is a spectroscopic survey of tens of millions of galaxies at $0 < z < 3.5$ covering 14,000 square degrees of the sky. In its first 1.1 years of survey operations, it has observed more than 14 million galaxies and 4 million stars. We describe the processes that govern DESI's observations of the 15,000 fields composing the survey. This includes the planning of each night's observations in the afternoon; automatic selection of fields to observe during the night; real-time assessment of field completeness on the basis of observing conditions during each exposure; reduction, redshifting, and quality assurance of each field of targets in the morning following observation; and updates to the list of future targets to observe on the basis of these results. We also compare the performance of the survey with historical expectations and find good agreement. Simulations of the weather and of DESI observations using the real field-selection algorithm show good agreement with the actual observations. After accounting for major unplanned shutdowns, the dark time survey is progressing about 7% faster than forecast, which is good agreement given approximations made in the simulations.

astro-ph.CO↗

Validation of the Scientific Program for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) was designed to conduct a survey covering 14,000 deg$^2$ over five years to constrain the cosmic expansion history through precise measurements of Baryon Acoustic Oscillations (BAO). The scientific program for DESI was evaluated during a five month Survey Validation (SV) campaign before beginning full operations. This program produced deep spectra of tens of thousands of objects from each of the stellar (MWS), bright galaxy (BGS), luminous red galaxy (LRG), emission line galaxy (ELG), and quasar target classes. These SV spectra were used to optimize redshift distributions, characterize exposure times, determine calibration procedures, and assess observational overheads for the five-year program. In this paper, we present the final target selection algorithms, redshift distributions, and projected cosmology constraints resulting from those studies. We also present a `One-Percent survey' conducted at the conclusion of Survey Validation covering 140 deg$^2$ using the final target selection algorithms with exposures of a depth typical of the main survey. The Survey Validation indicates that DESI will be able to complete the full 14,000 deg$^2$ program with spectroscopically-confirmed targets from the MWS, BGS, LRG, ELG, and quasar programs with total sample sizes of 7.2, 13.8, 7.46, 15.7, and 2.87 million, respectively. These samples will allow exploration of the Milky Way halo, clustering on all scales, and BAO measurements with a statistical precision of 0.28% over the redshift interval $z<1.1$, 0.39% over the redshift interval $1.1<z<1.9$, and 0.46% over the redshift interval $1.9<z<3.5$.

astro-ph.CO↗

The Lyman-$α$ forest catalog from the Dark Energy Spectroscopic Instrument Early Data Release

We present and validate the catalog of Lyman-$α$ forest fluctuations for 3D analyses using the Early Data Release (EDR) from the Dark Energy Spectroscopic Instrument (DESI) survey. We used 88,511 quasars collected from DESI Survey Validation (SV) data and the first two months of the main survey (M2). We present several improvements to the method used to extract the Lyman-$α$ absorption fluctuations performed in previous analyses from the Sloan Digital Sky Survey (SDSS). In particular, we modify the weighting scheme and show that it can improve the precision of the correlation function measurement by more than 20%. This catalog can be downloaded from https://data.desi.lbl.gov/public/edr/vac/edr/lya/fuji/v0.3 and it will be used in the near future for the first DESI measurements of the 3D correlations in the Lyman-$α$ forest.

astro-ph.CO↗

Astrometric Calibration and Performance of the Dark Energy Spectroscopic Instrument Focal Plane

The Dark Energy Spectroscopic Instrument, consisting of 5020 robotic fiber positioners and associated systems on the Mayall telescope at Kitt Peak, Arizona, is carrying out a survey to measure the spectra of 40 million galaxies and quasars and produce the largest 3D map of the universe to date. The primary science goal is to use baryon acoustic oscillations to measure the expansion history of the universe and the time evolution of dark energy. A key function of the online control system is to position each fiber on a particular target in the focal plane with an accuracy of 11$μ$m rms 2-D. This paper describes the set of software programs used to perform this function along with the methods used to validate their performance.

astro-ph.IM↗

A striking relationship between dust extinction and radio detection in DESI QSOs: evidence for a dusty blow-out phase in red QSOs

We present the first eight months of data from our secondary target program within the ongoing Dark Energy Spectroscopic Instrument (DESI) survey. Our program uses a mid-infrared and optical colour selection to preferentially target dust-reddened QSOs that would have otherwise been missed by the nominal DESI QSO selection. So far we have obtained optical spectra for 3038 candidates, of which ~70% of the high-quality objects (those with robust redshifts) are visually confirmed to be Type 1 QSOs, consistent with the expected fraction from the main DESI QSO survey. By fitting a dust-reddened blue QSO composite to the QSO spectra, we find they are well-fitted by a normal QSO with up to Av~4 mag of line-of-sight dust extinction. Utilizing radio data from the LOFAR Two-metre Sky Survey (LoTSS) DR2, we identify a striking positive relationship between the amount of line-of-sight dust extinction towards a QSO and the radio detection fraction, that is not driven by radio-loud systems, redshift and/or luminosity effects. This demonstrates an intrinsic connection between dust reddening and the production of radio emission in QSOs, whereby the radio emission is most likely due to low-powered jets or winds/outflows causing shocks in a dusty environment. On the basis of this evidence we suggest that red QSOs may represent a transitional "blow-out" phase in the evolution of QSOs, where winds and outflows evacuate the dust and gas to reveal an unobscured blue QSO.

astro-ph.GA↗

Performance of the Quasar Spectral Templates for the Dark Energy Spectroscopic Instrument

Millions of quasar spectra will be collected by the Dark Energy Spectroscopic Instrument (DESI), leading to a four-fold increase in the number of known quasars. High accuracy quasar classification is essential to tighten constraints on cosmological parameters measured at the highest redshifts DESI observes ($z>2.0$). We present the spectral templates for identification and redshift estimation of quasars in the DESI Year 1 data release. The quasar templates are comprised of two quasar eigenspectra sets, trained on spectra from the Sloan Digital Sky Survey. The sets are specialized to reconstruct quasar spectral variation observed over separate yet overlapping redshift ranges and, together, are capable of identifying DESI quasars from $0.05 < z <7.0$. The new quasar templates show significant improvement over the previous DESI quasar templates regarding catastrophic failure rates, redshift precision and accuracy, quasar completeness, and the contamination fraction in the final quasar sample.

astro-ph.IM↗

Target Selection and Sample Characterization for the DESI LOW-Z Secondary Target Program

We introduce the DESI LOW-Z Secondary Target Survey, which combines the wide-area capabilities of the Dark Energy Spectroscopic Instrument (DESI) with an efficient, low-redshift target selection method. Our selection consists of a set of color and surface brightness cuts, combined with modern machine learning methods, to target low-redshift dwarf galaxies ($z$ < 0.03) between $19 < r < 21$ with high completeness. We employ a convolutional neural network (CNN) to select high-priority targets. The LOW-Z survey has already obtained over 22,000 redshifts of dwarf galaxies (M$_* < 10^9$ M$_\odot$), comparable to the number of dwarf galaxies discovered in SDSS-DR8 and GAMA. As a spare fiber survey, LOW-Z currently receives fiber allocation for just ~50% of its targets. However, we estimate that our selection is highly complete: for galaxies at $z < 0.03$ within our magnitude limits, we achieve better than 95% completeness with ~1% efficiency using catalog-level photometric cuts. We also demonstrate that our CNN selections $z<0.03$ galaxies from the photometric cuts subsample at least ten times more efficiently while maintaining high completeness. The full five-year DESI program will expand the LOW-Z sample, densely mapping the low-redshift Universe, providing an unprecedented sample of dwarf galaxies, and providing critical information about how to pursue effective and efficient low-redshift surveys.

astro-ph.GA↗

The DESI Survey Validation: Results from Visual Inspection of Bright Galaxies, Luminous Red Galaxies, and Emission Line Galaxies

The Dark Energy Spectroscopic Instrument (DESI) Survey has obtained a set of spectroscopic measurements of galaxies to validate the final survey design and target selections. To assist in these tasks, we visually inspect (VI) DESI spectra of approximately 2,500 bright galaxies, 3,500 luminous red galaxies (LRGs), and 10,000 emission line galaxies (ELGs), to obtain robust redshift identifications. We then utilize the VI redshift information to characterize the performance of the DESI operation. Based on the VI catalogs, our results show that the final survey design yields samples of bright galaxies, LRGs, and ELGs with purity greater than $99\%$. Moreover, we demonstrate that the precision of the redshift measurements is approximately 10 km/s for bright galaxies and ELGs and approximately 40 km/s for LRGs. The average redshift accuracy is within 10 km/s for the three types of galaxies. The VI process also helps improve the quality of the DESI data by identifying spurious spectral features introduced by the pipeline. Finally, we show examples of unexpected real astronomical objects, such as Ly$α$ emitters and strong lensing candidates, identified by VI. These results demonstrate the importance and utility of visually inspecting data from incoming and upcoming surveys, especially during their early operation phases.

astro-ph.CO↗

The DESI Survey Validation: Results from Visual Inspection of the Quasar Survey Spectra

A key component of the Dark Energy Spectroscopic Instrument (DESI) survey validation (SV) is a detailed visual inspection (VI) of the optical spectroscopic data to quantify key survey metrics. In this paper we present results from VI of the quasar survey using deep coadded SV spectra. We show that the majority (~70%) of the main-survey targets are spectroscopically confirmed as quasars, with ~16% galaxies, ~6% stars, and ~8% low-quality spectra lacking reliable features. A non-negligible fraction of the quasars are misidentified by the standard spectroscopic pipeline but we show that the majority can be recovered using post-pipeline "afterburner" quasar-identification approaches. We combine these "afterburners" with our standard pipeline to create a modified pipeline to improve the overall quasar yield. At the depth of the main DESI survey both pipelines achieve a good-redshift purity (reliable redshifts measured within 3000 km/s) of ~99%; however, the modified pipeline recovers ~94% of the visually inspected quasars, as compared to ~86% from the standard pipeline. We demonstrate that both pipelines achieve an median redshift precision and accuracy of ~100 km/s and ~70 km/s, respectively. We constructed composite spectra to investigate why some quasars are missed by the standard spectroscopic pipeline and find that they are more host-galaxy dominated (i.e., distant analogs of "Seyfert galaxies") and/or dust reddened than the standard-pipeline quasars. We also show example spectra to demonstrate the overall diversity of the DESI quasar sample and provide strong-lensing candidates where two targets contribute to a single spectrum.

astro-ph.GA↗

Target Selection and Validation of DESI Luminous Red Galaxies

The Dark Energy Spectroscopic Instrument (DESI) is carrying out a 5-year survey that aims to measure the redshifts of tens of millions of galaxies and quasars, including 8 million luminous red galaxies (LRGs) in the redshift range of $0.4<z<{\sim}\,1.0$. Here we present the selection of the DESI LRG sample and assess its spectroscopic performance using data from Survey Validation (SV) and the first 2 months of the Main Survey. The DESI LRG sample, selected using $g$, $r$, $z$, and $W1$ photometry from the DESI Legacy Imaging Surveys, is highly robust against imaging systematics. The sample has a target density of 605 deg$^{-2}$ and a comoving number density of $5\times10^{-4}\ h^3\mathrm{Mpc}^{-3}$ in $0.4<z<0.8$; this is a significantly higher density than previous LRG surveys (such as SDSS, BOSS and eBOSS) while also extending to $z \sim 1$. After applying a bright star veto mask developed for the sample, $98.9\%$ of the observed LRG targets yield confident redshifts (with a catastrophic failure rate of $0.2\%$ in the confident redshifts), and only $0.5\%$ of the LRG targets are stellar contamination. The LRG redshift efficiency varies with source brightness and effective exposure time, and we present a simple model that accurately characterizes this dependence. In the appendices, we describe the extended LRG samples observed during SV.

astro-ph.CO↗

Target Selection and Validation of DESI Emission Line Galaxies

The Dark Energy Spectroscopic Instrument (DESI) will precisely constrain cosmic expansion and the growth of structure by collecting $\sim$40 million extra-galactic redshifts across $\sim$80\% of cosmic history and one third of the sky. The Emission Line Galaxy (ELG) sample, which will comprise about one-third of all DESI tracers, will be used to probe the Universe over the $0.6 < z < 1.6$ range, which includes the $1.1<z<1.6$ range, expected to provide the tightest constraints. We present the target selection of the DESI SV1 Survey Validation and Main Survey ELG samples, which relies on the Legacy Surveys imaging. The Main ELG selection consists of a $g$-band magnitude cut and a $(g-r)$ vs.\ $(r-z)$ color box, while the SV1 selection explores extensions of the Main selection boundaries. The Main ELG sample is composed of two disjoint subsamples, which have target densities of about 1940 deg$^{-2}$ and 460 deg$^{-2}$, respectively. We first characterize their photometric properties and density variations across the footprint. Then we analyze the DESI spectroscopic data obtained since December 2020 during the Survey Validation and the Main Survey up to December 2021. We establish a preliminary criterion to select reliable redshifts, based on the \oii~flux measurement, and assess its performance. Using that criterion, we are able to present the spectroscopic efficiency of the Main ELG selection, along with its redshift distribution. We thus demonstrate that the the main selection with higher target density sample should provide more than 400 deg$^{-2}$ reliable redshifts in both the $0.6<z<1.1$ and the $1.1<z<1.6$ ranges.

astro-ph.CO↗

Overview of the Instrumentation for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) has embarked on an ambitious five-year survey to explore the nature of dark energy with spectroscopy of 40 million galaxies and quasars. DESI will determine precise redshifts and employ the Baryon Acoustic Oscillation method to measure distances from the nearby universe to z > 3.5, as well as measure the growth of structure and probe potential modifications to general relativity. In this paper we describe the significant instrumentation we developed for the DESI survey. The new instrumentation includes a wide-field, 3.2-deg diameter prime-focus corrector that focuses the light onto 5020 robotic fiber positioners on the 0.812 m diameter, aspheric focal surface. The positioners and their fibers are divided among ten wedge-shaped petals. Each petal is connected to one of ten spectrographs via a contiguous, high-efficiency, nearly 50 m fiber cable bundle. The ten spectrographs each use a pair of dichroics to split the light into three channels that together record the light from 360 - 980 nm with a resolution of 2000 to 5000. We describe the science requirements, technical requirements on the instrumentation, and management of the project. DESI was installed at the 4-m Mayall telescope at Kitt Peak, and we also describe the facility upgrades to prepare for DESI and the installation and functional verification process. DESI has achieved all of its performance goals, and the DESI survey began in May 2021. Some performance highlights include RMS positioner accuracy better than 0.1", SNR per \sqrtÅ > 0.5 for a z > 2 quasar with flux 0.28e-17 erg/s/cm^2/A at 380 nm in 4000s, and median SNR = 7 of the [OII] doublet at 8e-17 erg/s/cm^2 in a 1000s exposure for emission line galaxies at z = 1.4 - 1.6. We conclude with highlights from the on-sky validation and commissioning of the instrument, key successes, and lessons learned. (abridged)

astro-ph.IM↗