Searcharxiv⌕ Search

arXiv subjects

K. Flood

Publications and source records attributed to K. Flood.

18 recordsLinked to original sources
arXiv2022

Search for Lepton-Flavor-Violating $\tau$ Decays to a Lepton and an Invisible Boson at Belle II

We search for lepton-flavor-violating $\tau^-\to e^-\alpha$ and $\tau^-\to\mu^-\alpha$ decays, where $\alpha$ is an invisible spin-0 boson. The search uses electron-positron collisions at $10.58$ GeV center-of-mass energy with an integrated luminosity of $62.8$ fb$^{-1}$, produced by the SuperKEKB collider and collected with the Belle II detector. We search for an excess in the lepton-energy spectrum of the known $\tau^-\to e^-\bar\nu_e \nu_\tau$ and $\tau^-\to \mu^-\bar\nu_\mu \nu_\tau$ decays. We report 95\% confidence-level upper limits on the branching-fraction ratio ${\mathcal B}(\tau^-\to e^- \alpha) / {\mathcal B}(\tau^- \to e^- \bar\nu_e \nu_\tau)$ in the range $(1.1-9.7) \times 10^{-3}$ and on ${\mathcal B}(\tau^-\to \mu^- \alpha) / {\mathcal B}(\tau^- \to \mu^- \bar\nu_\mu \nu_\tau)$ in the range $(0.7-12.2) \times 10^{-3}$ for $\alpha$ masses between 0 and 1.6 GeV/c$^2$. These results provide the most stringent bounds on invisible boson production from $\tau$ decays.

hep-ex↗
arXiv2022

First Test Results of the Trans-Impedance Amplifier Stage of the Ultra-fast HPSoC ASIC

We present the first results from the HPSoC ASIC designed for readout of Ultra-fast Silicon Detectors. The 4-channel ASIC manufactured in 65 nm CMOS by TSMC has been optimized for 50 um thick AC-LGAD. The evaluation of the analog front end with \b{eta}-particles impinging on 3x3 AC-LGAD arrays (500 um pitch, 200x200 um2 metal) confirms a fast output rise time of 600 ps and good timing performance with a jitter of 45 ps. Further calibration experiments and TCT laser studies indicate some gain limitations that are being investigated and are driving the design of the second-generation pre-amplification stages to reach a jitter of 15 ps.

physics.ins-det↗
arXiv2022

CORE -- a COmpact detectoR for the EIC

The COmpact detectoR for the Eic (CORE) Proposal was submitted to the EIC "Call for Collaboration Proposals for Detectors". CORE comprehensively covers the physics scope of the EIC Community White Paper and the National Academies of Science 2018 report. The design exploits advances in detector precision and granularity to minimize size. The central detector includes a 3Tesla, 2.5m solenoid. Tracking is primarily silicon. Electromagnetic calorimetry is based on the high performance crystals. Ring-imaging Cherenkov detectors provide hadronic particle identification.

physics.ins-det↗
arXiv2022

Search for a dark photon and an invisible dark Higgs boson in $\mu^+\mu^-$ and missing energy final states with the Belle II experiment

The dark photon $A^\prime$ and the dark Higgs boson $h^\prime$ are hypothetical particles predicted in many dark sector models. We search for the simultaneous production of $A^\prime$ and $h^\prime$ in the dark Higgsstrahlung process $e^{+}e^{-}\rightarrow A^\prime \, h^\prime$ with $A^\prime \rightarrow \mu^+\mu^-$ and $ h^\prime$ invisible in electron-positron collisions at a center-of-mass energy of 10.58 GeV collected by the Belle II experiment in 2019. With an integrated luminosity of 8.34 fb$^{-1}$, we observe no evidence for signal. We obtain exclusion limits at 90% Bayesian credibility in the range of 1.7--5.0 fb on the cross section and in the range of $1.7 \times10^{-8}$--$200 \times10^{-8}$ on the effective coupling $\varepsilon^2 \times \alpha_D$ for the $A^\prime$ mass in the range of 4.0 GeV/$c^2$ $< M_{A^\prime}< 9.7$ GeV/$c^2$ and for the $h^\prime$ mass $M_{h^\prime} < M_{A^\prime}$, where $\varepsilon$ is the mixing strength between the standard model and the dark photon and $\alpha_D$ is the coupling of the dark photon to the dark Higgs boson. Our limits are the first in this mass range.

hep-ex↗
arXiv2022

Measurement of the $\Lambda_c^+$ lifetime

An absolute measurement of the $\Lambda^{+}_c$ lifetime is reported using $\Lambda_c^+\rightarrow pK^-\pi^+$ decays in events reconstructed from data collected by the Belle II experiment at the SuperKEKB asymmetric-energy electron-positron collider. The total integrated luminosity of the data sample, which was collected at center-of-mass energies at or near the $\Upsilon(4S)$ resonance, is $207.2~\mbox{fb}^{-1}$. The result, $\tau(\Lambda^{+}_c) = 203.20 \pm 0.89 \,\mathrm{(stat)} \pm 0.77 \,\mathrm{(syst)}$ fs, is the most precise measurement to date and is consistent with previous determinations.

hep-ex↗
arXiv2022

Snowmass 2021 White Paper on Upgrading SuperKEKB with a Polarized Electron Beam: Discovery Potential and Proposed Implementation

Upgrading the SuperKEKB electron-positron collider with polarized electron beams opens a new program of precision physics at a center-of-mass energy of 10.58 GeV. This white paper describes the physics potential of this `Chiral Belle' program. It includes projections for precision measurements of $\sin^2\theta_W$ that can be obtained from independent left-right asymmetry measurements of $e^+e^-$ transitions to pairs of electrons, muons, taus, charm and b-quarks. The $\sin^2\theta_W$ precision obtainable at SuperKEKB will match that of the LEP/SLC world average, but at the centre-of-mass energy of 10.58 GeV. Measurements of the couplings for muons, charm, and $b$-quarks will be substantially improved and the existing $3\sigma$ discrepancy between the SLC $A_{LR}$ and LEP $A_{FB}^b$ measurements will be addressed. Precision measurements of neutral current universality will be more than an order of magnitude more precise than currently available. As the energy scale is well away from the $Z^0$-pole, the precision measurements will have sensitivity to the presence of a parity-violating dark sector gauge boson, $Z_{\rm dark}$. The program also enables the measurement of the anomalous magnetic moment $g-2$ form factor of the $\tau$ to be made at an unprecedented level of precision. A precision of $10^{-5}$ level is accessible with 40~ab$^{-1}$ and with more data it would start to approach the $10^{-6}$ level. This technique would provide the most precise information from the third generation about potential new physics explanations of the muon $g-2$ $4\sigma$ anomaly. Additional $\tau$ and QCD physics programs enabled or enhanced with having polarized electron beams are also discussed in this White Paper. This paper includes a summary of the path forward in R&D and next steps required to implement this upgrade and access its exciting discovery potential.

physics.acc-ph↗
arXiv2022

Enabling Capabilities for Infrastructure and Workforce in Electronics and ASICs

The impressive progress in data rate capabilities, pattern recognition, and spatial resolution of current detectors in experimental particle physics has been possible thanks to the availability of sophisticated analog processors combined with complex digital signal processors implemented in custom made front end ASICs. The demands in terms of performance and increasingly smaller feature sizes are significant. In order to meet these instrumentation challenges, we need to educate and retain a skilled work force, as well as aggregate design tools and acquired knowledge. We propose a multifaceted initiative to ensure that these needs are met.

physics.ins-det↗
arXiv2022

Electronics for Fast Timing

Picosecond-level timing will be an important component of the next generation of particle physics detectors. The ability to add a 4$^{th}$ dimension to our measurements will help address the increasing complexity of events at hadron colliders and provide new tools for precise tracking and calorimetry for all experiments. Detectors are described in detail on other whitepapers. In this note, we address challenges in electronics design for the new generations of fast timing detectors

physics.ins-det↗
arXiv2022

Belle II Executive Summary

Belle II is a Super $B$ Factory experiment, expected to record 50 ab$^{-1}$ of $e^+e^-$ collisions at the SuperKEKB accelerator until 2035. The large samples of $B$ mesons, charm hadrons, and tau leptons produced in the clean experimental environment of $e^+e^-$ collisions will provide the basis of a broad and unique flavor-physics program. Belle II will pursue physics beyond the Standard Model in many ways, for example: improving the precision of weak interaction parameters, particularly Cabibbo-Kobayashi-Maskawa (CKM) matrix elements and phases, and thus more rigorously test the CKM paradigm, measuring lepton-flavor-violating parameters, and performing unique searches for missing-mass dark matter events. Many key measurements will be made with world-leading precision.

hep-ex↗
arXiv2021

Measurements of branching fractions and asymmetry parameters of $\Xi^0_c\to \Lambda\bar K^{*0}$, $\Xi^0_c\to \Sigma^0\bar K^{*0}$, and $\Xi^0_c\to \Sigma^+K^{*-}$ decays at Belle

Using a data sample of 980 fb$^{-1}$ collected with the Belle detector at the KEKB asymmetric-energy $e^+e^-$ collider, we study the processes of $\Xi^0_c\to \Lambda\bar K^{*0}$, $\Xi^0_c\to \Sigma^0\bar K^{*0}$, and $\Xi^0_c\to \Sigma^+K^{*-}$ for the first time. The relative branching ratios to the normalization mode of $\Xi^0_c\to\Xi^-\pi^+$ are measured to be $${\cal B}(\Xi^0_c\to \Lambda\bar K^{*0})/{\cal B}(\xic\to \Xi^-\pi^+)=0.18\pm0.02({\rm stat.})\pm0.01({\rm syst.}),$$ $${\cal B}(\Xi^0_c\to \Sigma^0\bar K^{*0})/{\cal B}(\xic\to \Xi^-\pi^+)=0.69\pm0.03({\rm stat.})\pm0.03({\rm syst.}),$$ $${\cal B}(\Xi^0_c\to \Sigma^+K^{*-})/{\cal B}(\xic\to \Xi^-\pi^+)=0.34\pm0.06({\rm stat.})\pm0.02({\rm syst.}),$$ where the uncertainties are statistical and systematic, respectively. We obtain %measure the branching fractions of $\Xi^0_c\to \Lambda\bar K^{*0}$, $\Xi^0_c\to \Sigma^0\bar K^{*0}$, and $\Xi^0_c\to \Sigma^+K^{*-}$ to be $${\cal B}(\Xi^0_c\to \Lambda\bar K^{*0})=(3.3\pm0.3({\rm stat.})\pm0.2({\rm syst.})\pm1.0({\rm ref.}))\times10^{-3},$$ $${\cal B}(\Xi^0_c\to \Sigma^0\bar K^{*0})=(12.4\pm0.5({\rm stat.})\pm0.5({\rm syst.})\pm3.6({\rm ref.}))\times10^{-3},$$ $${\cal B}(\Xi^0_c\to \Sigma^+K^{*-})=(6.1\pm1.0({\rm stat.})\pm0.4({\rm syst.})\pm1.8({\rm ref.}))\times10^{-3},$$ where the uncertainties are statistical, systematic, and from ${\cal B}(\xic \to \Xi^-\pi^+)$, respectively. The asymmetry parameters $\alpha(\Xi^0_c\to \Lambda\bar K^{*0})$ and $\alpha(\Xi^0_c\to \Sigma^+K^{*-})$ are $0.15\pm0.22({\rm stat.})\pm0.04({\rm syst.})$ and $-0.52\pm0.30({\rm stat.})\pm0.02({\rm syst.})$, respectively, where the uncertainties are statistical followed by systematic.

hep-ex↗
arXiv2018

The Mu2e Calorimeter Final Technical Design Report

Since the first version of the Mu2e TDR released at the beginning of 2015, the Mu2e Calorimeter system has undergone a long list of changes to arrive to its final design. These changes were primarily caused by two reasons: (i) the technology choice between the TDR proposed solution of BaF2 crystals readout with solar blind Avalanche Photodiodes (APDs) and the backup option of CsI crystals readout with Silicon Photomultipliers (SiPM) has been completed and (ii) the channels numbering, the mechanical system and the readout electronics were substantially modified while proceeding with engineering towards the final project. This document updates the description of the calorimeter system adding the most recent engineering drawings and tecnical progresses.

physics.ins-det↗
arXiv2017

The calorimeter of the Mu2e experiment at Fermilab

The Mu2e experiment at Fermilab looks for Charged Lepton Flavor Violation (CLFV) improving by 4 orders of magnitude the current experimental sensitivity for the muon to electron conversion in a muonic atom. A positive signal could not be explained in the framework of the current Standard Model of particle interactions and therefore would be a clear indication of new physics. In 3 years of data taking, Mu2e is expected to observe less than one background event mimicking the electron coming from muon conversion. Achieving such a level of background suppression requires a deep knowledge of the experimental apparatus: a straw tube tracker, measuring the electron momentum and time, a cosmic ray veto system rejecting most of cosmic ray background and a pure CsI crystal calorimeter, that will measure time of flight, energy and impact position of the converted electron. The calorimeter has to operate in a harsh radiation environment, in a 10-4 Torr vacuum and inside a 1 T magnetic field. The results of the first qualification tests of the calorimeter components are reported together with the energy and time performances expected from the simulation and measured in beam tests of a small scale prototype.

physics.ins-det↗
arXiv2016

Design and status of the Mu2e electromagnetic calorimeter

The Mu2e experiment at Fermilab aims at measuring the neutrinoless conversion of a negative muon into an electron and reach a single event sensitivity of 2.5x10^{-17} after three years of data taking. The monoenergetic electron produced in the final state, is detected by a high precision tracker and a crystal calorimeter, all embedded in a large superconducting solenoid (SD) surrounded by a cosmic ray veto system. The calorimeter is complementary to the tracker, allowing an independent trigger and powerful particle identification, while seeding the track reconstruction and contributing to remove background tracks mimicking the signal. In order to match these requirements, the calorimeter should have an energy resolution of O(5)% and a time resolution better than 500 ps at 100 MeV. The baseline solution is a calorimeter composed of two disks of BaF2 crystals read by UV extended, solar blind, Avalanche Photodiode (APDs), which are under development from a JPL, Caltech, RMD consortium. In this paper, the calorimeter design, the R&D studies carried out so far and the status of engineering are described. A backup alternative setup consisting of a pure CsI crystal matrix read by UV extended Hamamatsu MPPC's is also presented.

physics.ins-det↗
arXiv2016

Design, status and test of the Mu2e crystal calorimeter

The Mu2e experiment at Fermilab searches for the charged-lepton flavor violating neutrino-less conversion of a negative muon into an electron in the field of a aluminum nucleus. The dynamic of such a process is well modeled by a two-body decay, resulting in a monoenergetic electron with an energy slightly below the muon rest mass (104.967 MeV). The calorimeter of this experiment plays an important role to provide excellent particle identification capabilities and an online trigger filter while aiding the track reconstruction capabilities. The baseline calorimeter configuration consists of two disks each made with about 700 undoped CsI crystals read out by two large area UV-extended Silicon Photomultipliers. These crystals match the requirements for stability of response, high resolution and radiation hardness. In this paper we present the final calorimeter design.

physics.ins-det↗
arXiv2016

Measurement of time resolution of the Mu2e LYSO calorimeter prototype

In this paper we present the time resolution measurements of the Lutetium-Yttrium Oxyorthosilicate (LYSO) calorimeter prototype for the Mu2e experiment. The measurements have been performed using the $e^-$ beam of the Beam Test Facility (BTF) in Frascati, Italy in the energy range from 100 to 400 MeV. The calorimeter prototype consisted of twenty five 30x30x130 mm$^3$, LYSO crystals read out by 10x10 mm$^2$ Hamamatsu Avalanche Photodiodes (APDs). The energy dependence of the measured time resolution can be parametrized as $σ_{t}(E)=a/\sqrt{E/\mathrm{GeV}} \oplus b$, with the stochastic and constant terms $a=(51\pm1)$ ps and $b=(10\pm4)$ ps, respectively. This corresponds to the time resolution of ($162\pm4$) ps at 100 MeV.

physics.ins-det↗
arXiv2015

Mu2e Technical Design Report

The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval.

physics.ins-det↗
arXiv2013

SuperB Technical Design Report

In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented. A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012.

physics.ins-det↗