arXiv subjects

K. Miller

Publications and source records attributed to K. Miller.

At least 19 recordsLinked to original sources

arXiv2023

A voxelized immersed boundary (VIB) finite element method for accurate and efficient blood flow simulation

We present an efficient and accurate immersed boundary (IB) finite element (FE) method for internal flow problems with complex geometries (e.g., blood flow in the vascular system). In this study, we use a voxelized flow domain (discretized with hexahedral and tetrahedral elements) instead of a box domain, which is frequently used in IB methods. The proposed method utilizes the well-established incremental pressure correction scheme (IPCS) FE solver, and the boundary condition-enforced IB (BCE-IB) method to numerically solve the transient, incompressible Navier--Stokes flow equations. We verify the accuracy of our numerical method using the analytical solution for the Poiseuille flow in a cylinder, and the available experimental data (laser Doppler velocimetry) for the flow in a three-dimensional 90{\deg} angle tube bend. We further examine the accuracy and applicability of the proposed method by considering flow within complex geometries, such as blood flow in aneurysmal vessels and the aorta, flow configurations that would otherwise be difficult to solve by most IB methods. Our method offers high accuracy, as demonstrated by the verification examples, and high applicability, as demonstrated through the solution of blood flow within complex geometry. The proposed method is efficient, since it is as fast as the traditional finite element method used to solve the Navier--Stokes flow equations, with a small overhead (not more than 5$\%$) due to the numerical solution of a linear system formulated for the IB method.

physics.flu-dyn↗

arXiv2023

Implicit electric field Conjugation: Data-driven focal plane control

Direct imaging of Earth-like planets is one of the main science cases for the next generation of extremely large telescopes. This is very challenging due to the star-planet contrast that must be overcome. Most current high-contrast imaging instruments are limited in sensitivity at small angular separations due to non-common path aberrations (NCPA). The NCPA leak through the coronagraph and create bright speckles that limit the on-sky contrast and therefore also the post-processed contrast. We aim to remove the NCPA by active focal plane wavefront control using a data-driven approach. We developed a new approach to dark hole creation and maintenance that does not require an instrument model. This new approach is called implicit Electric Field Conjugation (iEFC) and it can be empirically calibrated. This makes it robust for complex instruments where optical models might be difficult to realize. Numerical simulations have been used to explore the performance of iEFC for different coronagraphs. The method was validated on the internal source of the Magellan Adaptive Optics eXtreme (MagAO-X) instrument to demonstrate iEFC's performance on a real instrument. Numerical experiments demonstrate that iEFC can achieve deep contrast below $10^{-9}$ with several coronagraphs. The method is easily extended to broadband measurements and the simulations show that a bandwidth up to 40% can be handled without problems. Experiments with MagAO-X showed a contrast gain of a factor 10 in a broadband light and a factor 20 to 200 in narrowband light. A contrast of $5\cdot10^{-8}$ was achieved with the Phase Apodized Pupil Lyot Coronagraph at 7.5 $\lambda/D$. The new iEFC method has been demonstrated to work in numerical and lab experiments. It is a method that can be empirically calibrated and it can achieve deep contrast. This makes it a valuable approach for complex ground-based high-contrast imaging systems.

astro-ph.IM↗

arXiv2022

Measurement of ${}^{nat}$Pb($\nu_e$,X$n$) production with a stopped-pion neutrino source

Using neutrinos produced at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL), the COHERENT collaboration has studied the Pb($\nu_e$,X$n$) process with a lead neutrino-induced-neutron (NIN) detector. Data from this detector are fit jointly with previously collected COHERENT data on this process. A combined analysis of the two datasets yields a cross section that is $0.29^{+0.17}_{-0.16}$ times that predicted by the MARLEY event generator using experimentally-measured Gamow-Teller strength distributions, consistent with no NIN events at 1.8$\sigma$. This is the first inelastic neutrino-nucleus process COHERENT has studied, among several planned exploiting the high flux of low-energy neutrinos produced at the SNS.

hep-ex↗

arXiv2022

First measurement of quasi-elastic $\Lambda$ baryon production in muon anti-neutrino interactions in the MicroBooNE detector

We present the first measurement of the cross section of Cabibbo-suppressed $\Lambda$ baryon production, using data collected with the MicroBooNE detector when exposed to the neutrinos from the Main Injector beam at the Fermi National Accelerator Laboratory. The data analyzed correspond to $2.2 \times 10^{20}$ protons on target of neutrino mode running and $4.9 \times 10^{20}$ protons on target of anti-neutrino mode running. An automated selection is combined with hand scanning, with the former identifying five candidate $\Lambda$ production events when the signal was unblinded, consistent with the GENIE prediction of $5.3 \pm 1.1$ events. Several scanners were employed, selecting between three and five events, compared with a prediction from a blinded Monte Carlo simulation study of $3.7 \pm 1.0$ events. Restricting the phase space to only include $\Lambda$ baryons that decay above MicroBooNE's detection thresholds, we obtain a flux averaged cross section of $2.0^{+2.2}_{-1.7} \times 10^{-40}$ cm$^2/$Ar, where statistical and systematic uncertainties are combined.

hep-ex↗

arXiv2022

Differential cross section measurement of charged current $\nu_{e}$ interactions without final-state pions in MicroBooNE

In this letter we present the first measurements of an exclusive electron neutrino cross section with the MicroBooNE experiment using data from the Booster Neutrino Beamline at Fermilab. These measurements are made for a selection of charged-current electron neutrinos without final-state pions. Differential cross sections are extracted in energy and angle with respect to the beam for the electron and the leading proton. The differential cross section as a function of proton energy is measured using events with protons both above and below the visibility threshold. This is done by including a separate selection of electron neutrino events without reconstructed proton candidates in addition to those with proton candidates. Results are compared to the predictions from several modern generators, and we find the data agrees well with these models. The data shows best agreement, as quantified by $p$-value, with the generators that predict a lower overall cross section, such as GENIE v3 and NuWro.

hep-ex↗

arXiv2022

Search for long-lived heavy neutral leptons and Higgs portal scalars decaying in the MicroBooNE detector

We present a search for long-lived Higgs portal scalars (HPS) and heavy neutral leptons (HNL) decaying in the MicroBooNE liquid-argon time projection chamber. The measurement is performed using data collected synchronously with the NuMI neutrino beam from Fermilab's Main Injector with a total exposure corresponding to $7.01 \times 10^{20}$ protons on target. We set upper limits at the $90\%$ confidence level on the mixing parameter $\lvert U_{\mu 4}\rvert^2$ ranging from $\lvert U_{\mu 4}\rvert^2<12.9\times 10^{-8}$ for Majorana HNLs with a mass of $m_{\rm HNL}=246$ MeV to $\lvert U_{\mu 4}\rvert^2<0.92 \times 10^{-8}$ for $m_{\rm HNL}=385$ MeV, assuming $\lvert U_{e 4}\rvert^2 = \lvert U_{\tau 4}\rvert^2 = 0$ and HNL decays into $\mu^\pm\pi^\mp$ pairs. These limits on $\lvert U_{\mu 4}\rvert^2$ represent an order of magnitude improvement in sensitivity compared to the previous MicroBooNE result. We also constrain the scalar-Higgs mixing angle $\theta$ by searching for HPS decays into $\mu^+\mu^-$ final states, excluding a contour in the parameter space with lower bounds of $\theta^2<31.3 \times 10^{-9}$ for $m_{\rm HPS}=212$ GeV and $\theta^2<1.09 \times 10^{-9}$ for $m_{\rm HPS}=275$ GeV. These are the first constraints on the scalar-Higgs mixing angle $\theta$ from a dedicated experimental search in this mass range.

hep-ex↗

arXiv2022

Towards on-sky adaptive optics control using reinforcement learning

The direct imaging of potentially habitable Exoplanets is one prime science case for the next generation of high contrast imaging instruments on ground-based extremely large telescopes. To reach this demanding science goal, the instruments are equipped with eXtreme Adaptive Optics (XAO) systems which will control thousands of actuators at a framerate of kilohertz to several kilohertz. Most of the habitable exoplanets are located at small angular separations from their host stars, where the current XAO systems' control laws leave strong residuals.Current AO control strategies like static matrix-based wavefront reconstruction and integrator control suffer from temporal delay error and are sensitive to mis-registration, i.e., to dynamic variations of the control system geometry. We aim to produce control methods that cope with these limitations, provide a significantly improved AO correction and, therefore, reduce the residual flux in the coronagraphic point spread function. We extend previous work in Reinforcement Learning for AO. The improved method, called PO4AO, learns a dynamics model and optimizes a control neural network, called a policy. We introduce the method and study it through numerical simulations of XAO with Pyramid wavefront sensing for the 8-m and 40-m telescope aperture cases. We further implemented PO4AO and carried out experiments in a laboratory environment using MagAO-X at the Steward laboratory. PO4AO provides the desired performance by improving the coronagraphic contrast in numerical simulations by factors 3-5 within the control region of DM and Pyramid WFS, in simulation and in the laboratory. The presented method is also quick to train, i.e., on timescales of typically 5-10 seconds, and the inference time is sufficiently small (< ms) to be used in real-time control for XAO with currently available hardware even for extremely large telescopes.

astro-ph.IM↗

arXiv2021

Novel Approach for Evaluating Detector-Related Uncertainties in a LArTPC Using MicroBooNE Data

Primary challenges for current and future precision neutrino experiments using liquid argon time projection chambers (LArTPCs) include understanding detector effects and quantifying the associated systematic uncertainties. This paper presents a novel technique for assessing and propagating LArTPC detector-related systematic uncertainties. The technique makes modifications to simulation waveforms based on a parameterization of observed differences in ionization signals from the TPC between data and simulation, while remaining insensitive to the details of the detector model. The modifications are then used to quantify the systematic differences in low- and high-level reconstructed quantities. This approach could be applied to future LArTPC detectors, such as those used in SBN and DUNE.

hep-ex↗

arXiv2021

New CC0\pi\ GENIE Model Tune for MicroBooNE

A novel tune has been made for the MicroBooNE experiment. The fit uses 4 new parameters within the GENIE v3.0.6 Monte Carlo program. Charged current pionless data from the T2K experiment was used. New uncertainties were obtained. These results will be used in future MicroBooNE analyses.

hep-ex↗

arXiv2021

Search for an anomalous excess of inclusive charged-current $\nu_e$ interactions in the MicroBooNE experiment using Wire-Cell reconstruction

We report a search for an anomalous excess of inclusive charged-current (CC) $\nu_e$ interactions using the Wire-Cell event reconstruction package in the MicroBooNE experiment, which is motivated by the previous observation of a low-energy excess (LEE) of electromagnetic events from the MiniBooNE experiment. With a single liquid argon time projection chamber detector, the measurements of $\nu_{\mu}$ CC interactions as well as $\pi^0$ interactions are used to constrain signal and background predictions of $\nu_e$ CC interactions. A data set collected from February 2016 to July 2018 corresponding to an exposure of 6.369 $\times$ 10$^{20}$ protons on target from the Booster Neutrino Beam at FNAL is analyzed. With $x$ representing an overall normalization factor and referred to as the LEE strength parameter, we select 56 fully contained $\nu_e$ CC candidates while expecting 69.6 $\pm$ 8.0 (stat.) $\pm$ 5.0 (sys.) and 103.8 $\pm$ 9.0 (stat.) $\pm$ 7.4 (sys.) candidates after constraints for the absence (eLEE$_{x=0}$) of the median signal strength derived from the MiniBooNE observation and the presence (eLEE$_{x=1}$) of that signal strength, respectively. Under a nested hypothesis test using both rate and shape information in all available channels, the best-fit $x$ is determined to be 0 (eLEE$_{x=0}$) with a 95.5% confidence level upper limit of $x$ at 0.502. Under a simple-vs-simple hypotheses test, the eLEE$_{x=1}$ hypothesis is rejected at 3.75$\sigma$, while the eLEE$_{x=0}$ hypothesis is shown to be consistent with the observation at 0.45$\sigma$. In the context of the eLEE model, the estimated 68.3% confidence interval of the $\nu_e$ hypothesis to explain the LEE observed in the MiniBooNE experiment is disfavored at a significance level of more than 2.6$\sigma$ (3.0$\sigma$) considering MiniBooNE's full (statistical) uncertainties.

hep-ex↗

arXiv2021

Electromagnetic Shower Reconstruction and Energy Validation with Michel Electrons and $\pi^0$ Samples for the Deep-Learning-Based Analyses in MicroBooNE

This article presents the reconstruction of the electromagnetic activity from electrons and photons (showers) used in the MicroBooNE deep learning-based low energy electron search. The reconstruction algorithm uses a combination of traditional and deep learning-based techniques to estimate shower energies. We validate these predictions using two $\nu_{\mu}$-sourced data samples: charged/neutral current interactions with final state neutral pions and charged current interactions in which the muon stops and decays within the detector producing a Michel electron. Both the neutral pion sample and Michel electron sample demonstrate agreement between data and simulation. Further, the absolute shower energy scale is shown to be consistent with the relevant physical constant of each sample: the neutral pion mass peak and the Michel energy cutoff.

hep-ex↗

arXiv2021

Calorimetric classification of track-like signatures in liquid argon TPCs using MicroBooNE data

The MicroBooNE liquid argon time projection chamber located at Fermilab is a neutrino experiment dedicated to the study of short-baseline oscillations, the measurements of neutrino cross sections in liquid argon, and to the research and development of this novel detector technology. Accurate and precise measurements of calorimetry are essential to the event reconstruction and are achieved by leveraging the TPC to measure deposited energy per unit length along the particle trajectory, with mm resolution. We describe the non-uniform calorimetric reconstruction performance in the detector, showing dependence on the angle of the particle trajectory. Such non-uniform reconstruction directly affects the performance of the particle identification algorithms which infer particle type from calorimetric measurements. This work presents a new particle identification method which accounts for and effectively addresses such non-uniformity. The newly developed method shows improved performance compared to previous algorithms, illustrated by a 94% proton selection efficiency and a 10% muon mis-identification rate, with a fairly loose selection of tracks performed on beam data. The performance is further demonstrated by identifying exclusive final states in $\nu_{\mu} CC$ interactions. While developed using MicroBooNE data and simulation, this method is easily applicable to future LArTPC experiments, such as SBND, ICARUS, and DUNE.

physics.ins-det↗

arXiv2021

Search for a Higgs portal scalar decaying to electron-positron pairs in the MicroBooNE detector

We present a search for the decays of a neutral scalar boson produced by kaons decaying at rest, in the context of the Higgs portal model, using the MicroBooNE detector. We analyze data triggered in time with the Fermilab NuMI neutrino beam spill, with an exposure of $1.93\times10^{20}$ protons on target. We look for monoenergetic scalars that come from the direction of the NuMI hadron absorber, at a distance of 100 m from the detector, and decay to electron-positron pairs. We observe one candidate event, with a Standard Model background prediction of $1.9\pm0.8$. We set an upper limit on the scalar-Higgs mixing angle of $\theta<(3.3-4.6)\times10^{-4}$ at the 95% confidence level for scalar boson masses in the range $(100-200)$ MeV$/c^2$. We exclude at the 95% confidence level the remaining model parameters required to explain the central value of a possible excess of $K^0_L\rightarrow\pi^0\nu\bar{\nu}$ decays reported by the KOTO collaboration. We also provide a model-independent limit on a new boson $X$ produced in $K\rightarrow\pi X$ decays and decaying to $e^+e^-$.

hep-ex↗

arXiv2021

The vector-apodizing phase plate coronagraph: design, current performance, and future development

Over the last decade, the vector-apodizing phase plate (vAPP) coronagraph has been developed from concept to on-sky application in many high-contrast imaging systems on 8-m class telescopes. The vAPP is an geometric-phase patterned coronagraph that is inherently broadband, and its manufacturing is enabled only by direct-write technology for liquid-crystal patterns. The vAPP generates two coronagraphic PSFs that cancel starlight on opposite sides of the point spread function (PSF) and have opposite circular polarization states. The efficiency, that is the amount of light in these PSFs, depends on the retardance offset from half-wave of the liquid-crystal retarder. Using different liquid-crystal recipes to tune the retardance, different vAPPs operate with high efficiencies ($>96\%$) in the visible and thermal infrared (0.55 $\mu$m to 5 $\mu$m). Since 2015, seven vAPPs have been installed in a total of six different instruments, including Magellan/MagAO, Magellan/MagAO-X, Subaru/SCExAO, and LBT/LMIRcam. Using two integral field spectrographs installed on the latter two instruments, these vAPPs can provide low-resolution spectra (R$\sim$30) between 1 $\mu$m and 5 $\mu$m. We review the design process, development, commissioning, on-sky performance, and first scientific results of all commissioned vAPPs. We report on the lessons learned and conclude with perspectives for future developments and applications.

astro-ph.IM↗

arXiv2021

Measurement of the Longitudinal Diffusion of Ionization Electrons in the MicroBooNE Detector

Accurate knowledge of electron transport properties is vital to understanding the information provided by liquid argon time projection chambers (LArTPCs). Ionization electron drift-lifetime, local electric field distortions caused by positive ion accumulation, and electron diffusion can all significantly impact the measured signal waveforms. This paper presents a measurement of the effective longitudinal electron diffusion coefficient, $D_L$, in MicroBooNE at the nominal electric field strength of 273.9 V/cm. Historically, this measurement has been made in LArTPC prototype detectors. This represents the first measurement in a large-scale (85 tonne active volume) LArTPC operating in a neutrino beam. This is the largest dataset ever used for this measurement. Using a sample of $\sim$70,000 through-going cosmic ray muon tracks tagged with MicroBooNE's cosmic ray tagger system, we measure $D_L = 3.74^{+0.28}_{-0.29}$ cm$^2$/s.

physics.ins-det↗

arXiv2020

Predominant Contribution of Direct Laser Acceleration to High-Energy Electron Spectra in a Low-Density Self-Modulated Laser Wakefield Accelerator

The two-temperature relativistic electron spectrum from a low-density ($3\times10^{17}$~cm$^{-3}$) self-modulated laser wakefield accelerator (SM-LWFA) is observed to transition between temperatures of $19\pm0.65$ and $46\pm2.45$ MeV at an electron energy of about 100 MeV. When the electrons are dispersed orthogonally to the laser polarization, their spectrum above 60 MeV shows a forking structure characteristic of direct laser acceleration (DLA). Both the two-temperature distribution and the forking structure are reproduced in a quasi-3D \textsc{Osiris} simulation of the interaction of the 1-ps, moderate-amplitude ($a_{0}=2.7$) laser pulse with the low-density plasma. Particle tracking shows that while the SM-LWFA mechanism dominates below 40 MeV, the highest-energy ($>60$ MeV) electrons gain most of their energy through DLA. By separating the simulated electric fields into modes, the DLA-dominated electrons are shown to lose significant energy to the longitudinal laser field from the tight focusing geometry, resulting in a more accurate measure of net DLA energy gain than previously possible.

physics.plasm-ph↗

arXiv2020

Intracranial hemodynamics simulations: An efficient and accurate immersed boundary scheme

Computational fluid dynamics (CFD) studies have been increasingly used for blood flow simulations in intracranial aneurysms (ICAs). However, despite the continuous progress of body-fitted CFD solvers, generating a high quality mesh is still the bottleneck of the CFD simulation, and strongly affects the accuracy of the numerical solution. To overcome this challenge, which will allow preforming CFD simulations efficiently for a large number of aneurysm cases we use an Immersed Boundary (IB) method. The proposed scheme relies on Cartesian grids to solve the incompressible Navier-Stokes (N-S) equations, using a finite element solver, and Lagrangian points to discretize the immersed object. All grid generations are conducted through automated algorithms which require no user input. Consequently, we verify the proposed method by comparing our numerical findings (velocity values) with published experimental results. Finally, we test the ability of the scheme to efficiently handle hemodynamic simulations on complex geometries on a sample of four patient-specific intracranial aneurysms.

cs.CE↗

arXiv2020

Immersed boundary finite element method for blood flow simulation

We present an efficient and accurate immersed boundary (IB) finite element (FE) solver for numerically solving incompressible Navier--Stokes equations. Particular emphasis is given to internal flows with complex geometries (blood flow in the vasculature system). IB methods are computationally costly for internal flows, mainly due to the large percentage of grid points that lie outside the flow domain. In this study, we apply a local refinement strategy, along with a domain reduction approach in order to reduce the grid that covers the flow domain and increase the percentage of the grid nodes that fall inside the flow domain. The proposed method utilizes an efficient and accurate FE solver with the incremental pressure correction scheme (IPCS), along with the boundary condition enforced IB method to numerically solve the transient, incompressible Navier--Stokes flow equations. We verify the accuracy of the numerical method using the analytical solution for Poiseuille flow in a cylinder. We further examine the accuracy and applicability of the proposed method by considering flow within complex geometries, such as blood flow in aneurysmal vessels and the aorta, flow configurations which would otherwise be extremely difficult to solve by most IB methods. Our method offers high accuracy, as demonstrated by the verification examples, and high efficiency, as demonstrated through the solution of blood flow within complex geometry on an off-the-shelf laptop computer.

cs.CE↗