SearcharxivSearch

arXiv subjects

K. R. Elder

Publications and source records attributed to K. R. Elder.

At least 19 recordsLinked to original sources

Uncovering liquid-substrate fluctuation effects on crystal growth and disordered hyperuniformity of two-dimensional materials

We investigate the growth of two-dimensional (2D) crystals on fluctuating surfaces using a phase field crystal model that is relevant on atomic length and diffusive time scales. Motivated by recent experiments which achieved unprecedented fast growth of large-size high-quality 2D crystals on liquid substrates, we uncover novel effects of liquid surfaces on microstructural ordering. We find that substrate fluctuations generate short-ranged noise that speeds up crystallization and grain growth of the overlayer, surpassing that of free-standing system. Coupling to the liquid substrate fluctuations can also modulate local randomness, leading to intriguing disordered structures with hidden spatial order, i.e., disordered hyperuniformity. These results reveal the physical mechanisms underlying the fast growth of 2D crystals on liquid surfaces and demonstrate a novel strategy for synthesizing disordered hyperuniform thin film structures.

cond-mat.mtrl-sci

Influence of dislocations in multilayer graphene stacks: A phase field crystal study

In this work the influence of $5|7$ dislocations in multiplayer graphene stacks (up to six layers) is examined. The study is conducted through a recently developed Phase Field Crystal (PFC) model for multilayer systems incorporating out-of-plane deformations and parameterized to match to density functional theory calculations for graphene bilayers and other systems. The specific configuration considered consists of one monolayer containing four $5|7$ dislocations (i.e., two dislocation dipoles) sandwiched in between perfect graphene layers. The study reveals how the strain field from the dislocations in the defected layer leads to out-of-plane deformations that in turn cause deformations of neighboring layers. Quantitative predictions are made for the defect free energy of the multilayer stacks as compared to a defect-free system, which is shown to increase with the number of layers and system size. Furthermore it is predicted that system defect energy saturates by roughly ten sheets in the stack, indicating the range of defect influence across the multilayer. Variations of stress field distribution and layer height profiles in different layer of the stack are also quantitatively identified.

cond-mat.mtrl-sci

Moiré patterns and inversion boundaries in graphene/hexagonal boron nitride bilayers

In this paper a systematic examination of graphene/hexagonal boron nitride (g/hBN) bilayers is presented, through a recently developed two-dimensional phase field crystal model that incorporates out-of-plane deformations. The system parameters are determined by closely matching the stacking energies and heights of graphene/hBN bilayers to those obtained from existing quantum-mechanical density functional theory calculations. Out-of-plane deformations are shown to reduce the energies of inversion domain boundaries in hBN, and the coupling between graphene and hBN layers leads to a bilayer defect configuration consisting of an inversion boundary in hBN and a domain wall in graphene. Simulations of twisted bilayers reveal the structure, energy, and elastic properties of the corresponding Moiré patterns, and show a crossover, as the misorientation angle between the layers increases, from a well-defined hexagonal network of domain boundaries and junctions to smeared-out patterns. The transition occurs when the thickness of domain walls approaches the size of the Moiré patterns, and coincides with the peaks in the average von Mises and volumetric stresses of the bilayer.

cond-mat.mtrl-sci

Phase ordering, transformation, and grain growth of two-dimensional binary colloidal crystals: A phase field crystal modeling

The formation and dynamics of a wide variety of binary two-dimensional ordered structures and superlattices are investigated through a phase field crystal model with sublattice ordering. Various types of binary ordered phases, the phase diagrams, and the grain growth dynamics and structural transformation processes, including the emergence of topological defects, are examined. The results are compared to the ordering and assembly of two-component colloidal systems. Two factors governing the binary phase ordering are identified, the coupling and competition between the length scales of two sublattices and the selection of average particle densities of two components. The control and variation of these two factors lead to the prediction of various complex binary ordered patterns, with different types of sublattice ordering for integer vs. noninteger ratios of sublattice length scales. These findings will enable further systematic studies of complex ordering and assembly processes of binary systems particularly binary colloidal crystals.

cond-mat.soft

Controlling grain boundaries by magnetic fields

The ability to use external magnetic fields to influence the microstructure in polycrystalline materials has potential applications in microstructural engineering. To explore this potential and to understand the complex interactions between electromagnetic fields and solid-state matter transport we consider a phase-field-crystal (PFC) model. Together with efficient and scalable numerical algorithms this allows the examination of the role that external magnetic fields play on the evolution of defect structures and grain boundaries, on diffusive time scales. Examples for planar and circular grain boundaries explain the essential atomistic processes and large scale simulations in 2D are used to obtain statistical data on grain growth under the influence of external fields.

cond-mat.mtrl-sci

Defects at grain boundaries: A coarse-grained, three-dimensional description by the amplitude expansion of the phase-field crystal model

We address a three-dimensional, coarse-grained description of dislocation networks at grain boundaries between rotated crystals. The so-called amplitude expansion of the phase-field crystal model is exploited with the aid of finite element method calculations. This approach allows for the description of microscopic features, such as dislocations, while simultaneously being able to describe length scales that are orders of magnitude larger than the lattice spacing. Moreover, it allows for the direct description of extended defects by means of a scalar order parameter. The versatility of this framework is shown by considering both fcc and bcc lattice symmetries and different rotation axes. First, the specific case of planar, twist grain boundaries is illustrated. The details of the method are reported and the consistency of the results with literature is discussed. Then, the dislocation networks forming at the interface between a spherical, rotated crystal embedded in an unrotated crystalline structure, are shown. Although explicitly accounting for dislocations which lead to an anisotropic shrinkage of the rotated grain, the extension of the spherical grain boundary is found to decrease linearly over time in agreement with the classical theory of grain growth and recent atomistic investigations. It is shown that the results obtained for a system with bcc symmetry agree very well with existing results, validating the methodology. Furthermore, fully original results are shown for fcc lattice symmetry, revealing the generality of the reported observations.

cond-mat.mtrl-sci

Grain Boundary Structures and Collective Dynamics of Inversion Domains in Binary Two-Dimensional Materials

Understanding and controlling the properties and dynamics of topological defects is a lasting challenge in the study of two-dimensional materials, and is crucial to achieve high-quality films required for technological applications. Here grain boundary structures, energies, and dynamics of binary two-dimensional materials are investigated through the development of a phase field crystal model that is parameterized to match the ordering, symmetry, energy and length scales of hexagonal boron nitride. Our studies reveal some new dislocation core structures for various symmetrically and asymmetrically tilted grain boundaries, in addition to those obtained in previous experiments and first-principles calculations. We also identify a defect-mediated growth dynamics for inversion domains governed by the collective atomic migration and defect core transformation at grain boundaries and junctions, a process that is related to inversion symmetry breaking in binary lattice.

cond-mat.mtrl-sci

Mass transport of adsorbates near a discontinuous structural phase transition

We study the mass transport dynamics of an adsorbed layer near a discontinuous incommensurate striped-honeycomb phase transition via numerical simulations of a coarse-grained model focusing on the motion of domain walls rather than individual atoms. Following an initial step profile created in the incommensurate striped phase, an intermediate hexagonal incommensurate phase nucleates and grows, leading to a bifurcation into two sharp profiles propagating in opposite directions as opposed to broad profiles induced by atomic diffusive motion. Our results are in agreement with recent numerical simulations of a microscopic model as well as experimental observations for the Pb/Si(111) adsorbate system.

cond-mat.mtrl-sci

Phase-field crystal model for ordered crystals

We describe a general method to model multicomponent ordered crystals using the phase-field crystal (PFC) formalism. As a test case, a generic B2 compound is investigated. We are able to produce a line of either first-order or second-order order-disorder phase transitions, features that have not been incorporated in existing PFC approaches. Further, it is found that the only elastic constant for B2 that depends on ordering is $C_{11}$. This B2 model was then used to study antiphase boundaries (APBs). The APBs were shown to reproduce classical mean field results. Dynamical simulations of ordering across small-angle grain boundaries predict that dislocation cores pin the evolution of APBs.

cond-mat.mtrl-sci

Phase-field-crystal models and mechanical equilibrium

Phase field crystal (PFC) models constitute a field theoretical approach to solidification, melting and related phenomena at atomic length and diffusive time scales. One of the advantages of these models is that they naturally contain elastic excitations associated with strain in crystalline bodies. However, instabilities that are diffusively driven towards equilibrium are often orders of magnitude slower than the dynamics of the elastic excitations, and are thus not included in the standard PFC model dynamics. We derive a method to isolate the time evolution of the elastic excitations from the diffusive dynamics in the PFC approach and set up a two-stage process, in which elastic excitations are equilibrated separately. This ensures mechanical equilibrium at all times. We show concrete examples demonstrating the necessity of the separation of the elastic and diffusive time scales. In the small deformation limit this approach is shown to agree with the theory of linear elasticity.

cond-mat.mtrl-sci

Phase Field Crystal Model for Magneto-Elasticity in Isotropic Ferromagnetic Solids

A new isotropic magneto-elastic phase field crystal (PFC) model to study the relation between morphological structure and magnetic properties of pure ferromagnetic solids is introduced. Analytic calculations were used to determine the phase diagram and obtain the relationship between elastic strains and magnetization. Time dependent numerical simulations were used to demonstrate the effect of grain boundaries on the formation of magnetic domains. It was shown that the grain boundaries act as nucleating sites for domains of reverse magnetization. Finally, we derive a relation for coercivity versus grain mis-orientation in the isotropic limit.

cond-mat.mtrl-sci

Glassy phases and driven response of the phase-field-crystal model with random pinning

We study the structural correlations and the nonlinear response to a driving force of a two-dimensional phase-field-crystal model with random pinning. The model provides an effective continuous description of lattice systems in the presence of disordered external pinning centers, allowing for both elastic and plastic deformations. We find that the phase-field crystal with disorder assumes an amorphous glassy ground state, with only short-ranged positional and orientational correlations even in the limit of weak disorder. Under increasing driving force, the pinned amorphous-glass phase evolves into a moving plastic-flow phase and then finally a moving smectic phase. The transverse response of the moving smectic phase shows a vanishing transverse critical force for increasing system sizes.

cond-mat.stat-mech

Phase Field Crystal Study of Symmetric Tilt Grain Boundaries of Iron

We apply the phase field crystal model to study the structure and energy of symmetric tilt grain boundaries of bcc iron in 3D. The parameters for the model are obtained by using a recently developed eight-order fitting scheme [A. Jaatinen et al., Phys. Rev. B 80, 031602 (2009)]. The grain boundary free energies we obtain from the model are in good agreement with previous results from molecular dynamics simulations and experiments.

cond-mat.mtrl-sci

Phase field crystal dynamics for binary systems: Derivation from dynamical density functional theory, amplitude equation formalism, and applications to alloy heterostructures

The dynamics of phase field crystal (PFC) modeling is derived from dynamical density functional theory (DDFT), for both single-component and binary systems. The derivation is based on a truncation up to the three-point direct correlation functions in DDFT, and the lowest order approximation using scale analysis. The complete amplitude equation formalism for binary PFC is developed to describe the coupled dynamics of slowly varying complex amplitudes of structural profile, zeroth-mode average atomic density, and system concentration field. Effects of noise (corresponding to stochastic amplitude equations) and species-dependent atomic mobilities are also incorporated in this formalism. Results of a sample application to the study of surface segregation and interface intermixing in alloy heterostructures and strained layer growth are presented, showing the effects of different atomic sizes and mobilities of alloy components. A phenomenon of composition overshooting at the interface is found, which can be connected to the surface segregation and enrichment of one of the atomic components observed in recent experiments of alloying heterostructures.

cond-mat.mtrl-sci

Dynamical transitions and sliding friction of the phase-field-crystal model with pinning

We study the nonlinear driven response and sliding friction behavior of the phase-field-crystal (PFC) model with pinning including both thermal fluctuations and inertial effects. The model provides a continuous description of adsorbed layers on a substrate under the action of an external driving force at finite temperatures, allowing for both elastic and plastic deformations. We derive general stochastic dynamical equations for the particle and momentum densities including both thermal fluctuations and inertial effects. The resulting coupled equations for the PFC model are studied numerically. At sufficiently low temperatures we find that the velocity response of an initially pinned commensurate layer shows hysteresis with dynamical melting and freezing transitions for increasing and decreasing applied forces at different critical values. The main features of the nonlinear response in the PFC model are similar to the results obtained previously with molecular dynamics simulations of particle models for adsorbed layers.

cond-mat.mtrl-sci

Amplitude expansion of the binary phase field crystal model

Amplitude representations of a binary phase field crystal model are developed for a two dimensional triangular lattice and three dimensional BCC and FCC crystal structures. The relationship between these amplitude equations and the standard phase field models for binary alloy solidification with elasticity are derived, providing an explicit connection between phase field crystal and phase field models. Sample simulations of solute migration at grain boundaries, eutectic solidification and quantum dot formation on nano-membranes are also presented.

cond-mat.mtrl-sci

Nonlinear Driven Response of a Phase-Field Crystal in a Periodic Pinning Potential

We study numerically the phase diagram and the response under a driving force of the phase field crystal model for pinned lattice systems introduced recently for both one and two dimensional systems. The model describes the lattice system as a continuous density field in the presence of a periodic pinning potential, allowing for both elastic and plastic deformations of the lattice. We first present results for phase diagrams of the model in the absence of a driving force. The nonlinear response to a driving force on an initially pinned commensurate phase is then studied via overdamped dynamic equations of motion for different values of mismatch and pinning strengths. For large pinning strength the driven depinning transitions are continuous, and the sliding velocity varies with the force from the threshold with power-law exponents in agreement with analytical predictions. Transverse depinning transitions in the moving state are also found in two dimensions. Surprisingly, for sufficiently weak pinning potential we find a discontinuous depinning transition with hysteresis even in one dimension under overdamped dynamics. We also characterize structural changes of the system in some detail close to the depinning transition.

cond-mat.mtrl-sci

Soft Elasticity in Nematic Liquid-Crystal Networks

Liquid-crystal networks consist of weakly crosslinked polymers that are coupled to liquid-crystal molecules. The resultant hybrid system has rich elastic properties. We develop a phase field model to describe mechanical properties of a hexagonal liquid-crystal network. The hexagonal liquid-crystal network is found to have soft shear deformations. The elastic properties are predicted analytically and confirmed with numerical simulations. In addition the model incorporates non-linear elasticity and dislocations or disclinations.

cond-mat.soft