arXiv subjects

K. Wada

Publications and source records attributed to K. Wada.

At least 19 recordsLinked to original sources

arXiv2023

Hydrogen embrittlement susceptibility of additively manufactured 316L stainless steel: influence of post-processing, printing direction, temperature and pre-straining

The influence of post-build processing on the hydrogen embrittlement behavior of additively manufactured (AM) 316L stainless steel fabricated using laser powder bed fusion was assessed at both room temperature and -50$^\circ$ C via uniaxial tensile experiments. In the absence of hydrogen at ambient temperature, all four evaluated AM conditions (as-built (AB), annealed (ANN), hot isostatic pressed (HIP), and HIP plus cold worked (CW) to 30\%) exhibit notably reduced ductility relative to conventionally manufactured (CM) 316L stainless steel. The AM material exhibits sensitivity to the build direction, both in the presence and absence of hydrogen, with a notable increase in yield strength in the X direction and enhanced ductility in the Z direction. Conversely, testing of non-charged specimens at -50$^\circ$ C revealed similar ductility between the CM, AB, ANN, and HIP conditions. Upon hydrogen charging, the ductility of all four AM conditions was found to be similar to that of CM 316L at ambient temperature, with the HIP condition actually exceeding the CM material. Critically, testing of hydrogen-charged samples at -50$^\circ$ C revealed that the ductility of the HIP AM 316L condition was nearly double that observed in the CM 316L. This improved performance persisted even after cold working, as the CW AM 316L exhibited comparable ductility to CM 316L at -50 C after hydrogen charging, despite having a 2-fold higher yield strength. Feritscope measurements suggest this increased performance is related to the reduced propensity for AM 316L to form strain-induced martensite during deformation, even after significant post-processing treatments. These results demonstrate that AM 316L can be post-processed using typical procedures to exhibit similar to or even improved resistance to hydrogen embrittlement relative to CM 316L.

physics.chem-ph↗

arXiv2023

Laser cooling of positronium

When laser radiation is skilfully applied, atoms and molecules can be cooled allowing precise measurements and control of quantum systems. This is essential in fundamental studies of physics as well as practical applications such as precision spectroscopy, quantum-statistical-property manifesting ultracold gases, and quantum computing. In laser cooling, repeated cycles of laser photon absorption and direction-independent spontaneous emission can slow atoms and molecules to otherwise unattainable velocities. Simple systems can provide a rigorous testing ground for fundamental theories of physics; one such system is the purely leptonic positronium, an exotic atom of an electron and its antiparticle, the positron. However, the cooling of positronium has hitherto remained unrealised. Here, we demonstrate laser cooling of positronium. A novel laser system of a train of broadband pulses with successively increasing central frequencies was used to overcome major challenges presented by the short lifetime of positronium and the significant Doppler broadening and recoil as a consequence of its very light mass. One-dimensional chirp cooling of the dilute positronium gas in a counter-propagating configuration gave a final velocity distribution corresponding to approximately 1 K in a short time of 100 ns. This study on a pure leptonic system is a major step in the field of low-temperature fundamental physics of antimatter, and is complementary to the laser cooling of antihydrogen, a hadron-containing exotic atom. Progress in this field is vital in elucidating the origin of the matter-antimatter asymmetry in the universe. The application of laser cooling to positronium may afford a unique opportunity to rigorously test bound-state quantum electrodynamics. Moreover, laser cooling of positronium is key to the realisation of Bose-Einstein condensation in this matter-antimatter system.

physics.atom-ph↗

arXiv2022

Effect of projectile shape and interior structure on crater size in strength regime

Experiments on crater formation in the strength regime were conducted using projectiles of various shapes with an aspect ratio of ~1, including both solid and hollow interiors. The surface diameter, inner (pit) diameter, and depth of the craters on basalt and porous gypsum targets were measured. Using the bulk density of the projectile, the surface diameter and depth for basalt and the pit diameter and depth for porous gypsum were scaled using the pi-scaling law for crater formation in the strength regime. The numerical code iSALE was used to simulate the impact of projectiles of various shapes and interior structure with similar bulk densities. Results show that the distributions of the maximum (peak) pressure experienced and particle velocity in the targets were similar regardless of projectile shape and interior structure, implying that the dimensions of the final craters were almost identical. This is consistent with the experimental results. Thus, we conclude that the size of the craters formed by the impact of projectiles with different shape and interior structure can be scaled using a conventional scaling law in the strength regime, using bulk density as projectile density.

astro-ph.EP↗

arXiv2021

Asynchronous Gathering Algorithms for Autonomous Mobile Robots with Lights

We consider a Gathering problem for n autonomous mobile robots with persistent memory called light in an asynchronous scheduler (ASYNC). It is well known that Gathering is impossible when robots have no lights in basic common models, if the system is semi-synchronous (SSYNC) or even centralized (only one robot is active in each time). It is known that Gathering can be solved by robots with 10 colors of lights in ASYNC. This result is obtained by combining the following results. (1) The simulation of SSYNC robots with k colors by ASYNC robots with 5k colors, and (2) Gathering is solved by SSYNC robots with 2 colors. In this paper, we improve the result by reducing the number of colors and show that Gathering can be solved by ASYNC robots with 3 colors of lights. We also show that we can construct a simulation algorithm of any unfair SSYNC algorithm using k colors by ASYNC robots with 3k colors, where unfairness does not guarantee that every robot is activated infinitely often. Combining this simulation and the Gathering algorithm by SSYNC robots with 2 colors, we obtain a Gathering algorithm by ASYNC robots with 6 colors. Our main result can be obtained by reducing the number of colors from 6 to 3.

cs.DC↗

arXiv2021

The Galaxy Activity, Torus and Outflow Survey (GATOS): II. Torus and polar dust emission in nearby Seyfert galaxies

We compare mid-IR and ALMA far-IR images of 12 nearby Seyferts selected from GATOS. The mid-IR unresolved emission contributes more than 60% of the nuclear emission in most galaxies. By contrast, the ALMA 870micron continuum emission is mostly resolved and typically along the torus equatorial direction (Paper I, Garcia-Burillo et al. 2021). The Eddington ratios and nuclear hydrogen column densities NH of half the sample are favorable to launching polar and/or equatorial dusty winds, according to simulations. Six show mid-IR extended emission in the polar direction as traced by the NLR and perpendicular to the ALMA emission. In a few, the nuclear NH might be too high to uplift large quantities of dusty material along the polar direction. Five galaxies have low NH and/or Eddington ratios and thus polar dusty winds are not likely. We generate new CAT3D-WIND disk-wind model images. At low wind-to-disk cloud ratios the far-IR model images have disk- and ring-like morphologies. The X-shape associated with dusty winds is seen better in the far-IR at intermediate-high inclinations for the extended-wind configurations. In most models, the mid-IR emission comes from the inner part of the disk/cone. Extended bi-conical and one-sided polar mid-IR emission is seen in extended-wind configurations and high wind-to-disk cloud ratios. When convolved to our resolution, the model images reproduce qualitative aspects of the observed morphologies. Low-intermediate wind-to-disk ratios are required to account for the large fractions of unresolved mid-IR emission. This work and Paper I provide observational support for the torus+wind scenario. The wind component is more relevant at high Eddington ratios and/or AGN luminosities, and polar dust emission is predicted at NH of up to $10^{24}$cm$^{-2}$. The torus/disk component, on the other hand, prevails at low luminosities and/or Eddington ratios. (Abridged)

astro-ph.GA↗

arXiv2021

The Galaxy Activity, Torus and Outflow Survey (GATOS) I. ALMA images of dusty molecular tori in Seyfert galaxies

We present the first results of the Galaxy Activity, Torus and Outflow Survey (GATOS), a project aimed at understanding the properties of the dusty molecular tori and their connection to the host galaxy in nearby Seyfert galaxies. Our project expands the range of AGN luminosities and Eddington ratios covered by previous surveys of Seyferts conducted by ALMA and allows us to study the gas feeding and feedback cycle in a combined sample of 19 Seyferts. We used ALMA to obtain new images of the emission of molecular gas and dust using the CO(3-2) and HCO+(4-3) lines as well as their underlying continuum emission at 870 microns with high spatial resolutions (0.1'' ~ 7 - 13 pc) in the CND of 10 nearby (D < 28 Mpc) Seyfert galaxies. Our new ALMA observations detect 870 micron continuum and CO line emission from spatially resolved disks located around the AGN in all the sources. The bulk of the continuum flux can be accounted for by thermal emission from dust in the majority of the targets. For most of the sources the disks show a preponderant orientation perpendicular to the AGN wind axes, as expected for dusty molecular tori. The median diameters and molecular gas masses of the tori are ~ 42 pc, and ~ 6 x 10**5 Msun, respectively. We find a positive correlation between the line-of-sight gas column densities responsible for the absorption of X-rays and the molecular gas column densities derived from CO towards the AGN in our sources. The radial distributions of molecular gas in the CND of our combined sample show signs of nuclear-scale molecular gas deficits. We also detect molecular outflows in the sources that show the most extreme nuclear-scale gas deficits in our sample. These observations find for the first time supporting evidence that the imprint of AGN feedback is more extreme in higher luminosity and/or higher Eddington ratio Seyfert galaxies.

astro-ph.GA↗

arXiv2020

ALMA resolves the remarkable molecular jet and rotating wind in the extremely radio-quiet galaxy NGC 1377

Submillimetre and millimetre observations are important in probing the properties of the molecular gas and dust around obscured active galactic nuclei (AGNs) and their feedback. With very high-resolution (0."02x0."03 (2x3 pc)) ALMA 345 GHz observations of CO 3-2, HCO$^+$ 4-3, HCN 4-3 $\nu_2$=1$f$, and continuum we have studied the molecular outflow and nucleus of the extremely radio-quiet lenticular galaxy NGC1377. The outflow is resolved, revealing a 150 pc long, clumpy, high-velocity, collimated molecular jet. The molecular emission is emerging from the spine of the jet with an average diameter of 3-7 pc. A narrow-angle, rotating molecular wind surrounds the jet and is enveloped by a larger-scale, slower CO-emitting structure. The jet and narrow wind are turbulent ($\sigma>$40 kms$^{-1}$) and have steep radial gas excitation gradients. The jet shows velocity reversals that we propose are caused by precession, or episodic directional changes. We suggest that an important process powering the outflow is magneto-centrifugal driving. In contrast, the large-scale CO-envelope may be a slow wind, or cocoon that stems from jet-wind interactions. An asymmetric, nuclear r$\sim$2 pc and hot (>180 K) dust structure with a high molecular column density, N(H$_2$)$\sim1.8 \times 10^{24}$ cm$^{-2}$, is detected in continuum and vibrationally excited HCN. Its luminosity is likely powered by a buried AGN. The mass of the supermassive black hole (SMBH) is estimated to $\sim9\times10^6$ M$_\odot$ and the SMBH of NGC1377 appears to be at the end of an intense phase of accretion. The nuclear growth may be fuelled by low-angular momentum gas inflowing from gas ejected in the molecular jet and wind. Such a feedback-loop of cyclic accretion and outflows would be an effective process in growing the nuclear SMBH. This result invites new questions as to SMBH growth processes in obscured, dusty galaxies.

astro-ph.GA↗

arXiv2017

The life cycle of starbursting circumnuclear gas discs

High-resolution observations from the sub-mm to the optical wavelength regime resolve the central few 100pc region of nearby galaxies in great detail. They reveal a large diversity of features: thick gas and stellar discs, nuclear starbursts, in- and outflows, central activity, jet interaction, etc. Concentrating on the role circumnuclear discs play in the life cycles of galactic nuclei, we employ 3D adaptive mesh refinement hydrodynamical simulations with the RAMSES code to self-consistently trace the evolution from a quasi-stable gas disc, undergoing gravitational (Toomre) instability, the formation of clumps and stars and the disc's subsequent, partial dispersal via stellar feedback. Our approach builds upon the observational finding that many nearby Seyfert galaxies have undergone intense nuclear starbursts in their recent past and in many nearby sources star formation is concentrated in a handful of clumps on a few 100pc distant from the galactic centre. We show that such observations can be understood as the result of gravitational instabilities in dense circumnuclear discs. By comparing these simulations to available integral field unit observations of a sample of nearby galactic nuclei, we find consistent gas and stellar masses, kinematics, star formation and outflow properties. Important ingredients in the simulations are the self-consistent treatment of star formation and the dynamical evolution of the stellar distribution as well as the modelling of a delay time distribution for the supernova feedback. The knowledge of the resulting simulated density structure and kinematics on pc scale is vital for understanding inflow and feedback processes towards galactic scales.

astro-ph.GA↗

arXiv2017

On the disappearance of a cold molecular torus around the low-luminosity active galactic nucleus of NGC 1097

We used the Atacama Large Millimeter/submillimeter Array (ALMA) to map the CO(3-2) and the underlying continuum emissions around the type 1 low-luminosity active galactic nucleus (LLAGN; bolometric luminosity $\lesssim 10^{42}$ erg~s$^{-1}$) of NGC 1097 at $\sim 10$ pc resolution. These observations revealed a detailed cold gas distribution within a $\sim 100$ pc of this LLAGN. In contrast to the luminous Seyfert galaxy NGC 1068, where a $\sim 7$ pc cold molecular torus was recently revealed, a distinctively dense and compact torus is missing in our CO(3-2) integrated intensity map of NGC 1097. Based on the CO(3-2) flux, the gas mass of the torus of NGC 1097 would be a factor of $\gtrsim 2-3$ less than that found for NGC 1068 by using the same CO-to-H$_2$ conversion factor, which implies less active nuclear star formation and/or inflows in NGC 1097. Our dynamical modeling of the CO(3-2) velocity field implies that the cold molecular gas is concentrated in a thin layer as compared to the hot gas traced by the 2.12 $μ$m H$_2$ emission in and around the torus. Furthermore, we suggest that NGC 1097 hosts a geometrically thinner torus than NGC 1068. Although the physical origin of the torus thickness remains unclear, our observations support a theoretical prediction that geometrically thick tori with high opacity will become deficient as AGNs evolve from luminous Seyferts to LLAGNs.

astro-ph.GA↗

arXiv2017

Luminous, pc-scale CO 6-5 emission in the obscured nucleus of NGC1377

High resolution submm observations are important in probing the morphology, column density and dynamics of obscured active galactic nuclei (AGNs). With high resolution (0.06 x 0.05) ALMA 690 GHz observations we have found bright (TB >80 K) and compact (FWHM 10x7 pc) CO 6-5 line emission in the nucleus of the extremely radio-quiet galaxy NGC1377. The integrated CO 6-5 intensity is aligned with the previously discovered jet/outflow of NGC1377 and is tracing the dense (n>1e4 cm-3), hot gas at the base of the outflow. The velocity structure is complex and shifts across the jet/outflow are discussed in terms of jet-rotation or separate, overlapping kinematical components. High velocity gas (deltaV +-145 km/s) is detected inside r<2-3 pc and we suggest that it is emerging from an inclined rotating disk or torus of position angle PA=140+-20 deg with a dynamical mass of approx 3e6 Msun. This mass is consistent with that of a supermassive black hole (SMBH), as inferred from the M-sigma relation. The gas mass of the proposed disk/torus constitutes <3% of the nuclear dynamical mass. In contrast to the intense CO 6-5 line emission, we do not detect dust continuum with an upper limit of S(690GHz)<2mJy. The corresponding, 5 pc, H2 column density is estimated to N(H2)<3e23 cm-2, which is inconsistent with a Compton Thick (CT) source. We discuss the possibility that CT obscuration may be occuring on small (subparsec) or larger scales. From SED fitting we suggest that half of the IR emission of NGC1377 is nuclear and the rest (mostly the far-infrared (FIR)) is more extended. The extreme radio quietness, and the lack of emission from other star formation tracers, raise questions on the origin of the FIR emission. We discuss the possibility that it is arising from the dissipation of shocks in the molecular jet/outflow or from irradiation by the nuclear source along the poles.

astro-ph.GA↗

arXiv2016

A precessing molecular jet signaling an obscured, growing supermassive black hole in NGC1377?

With high resolution (0."25 x 0."18) ALMA CO 3-2 observations of the nearby (D=21 Mpc, 1"=102 pc), extremely radio-quiet galaxy NGC1377, we have discovered a high-velocity, very collimated nuclear outflow which we interpret as a molecular jet with a projected length of +-150 pc. Along the jet axis we find strong velocity reversals where the projected velocity swings from -150 km/s to +150 km/s. A simple model of a molecular jet precessing around an axis close to the plane of the sky can reproduce the observations. The velocity of the outflowing gas is difficult to constrain due to the velocity reversals but we estimate it to be between 240 and 850 km/s and the jet to precess with a period P=0.3-1.1 Myr. The CO emission is clumpy along the jet and the total molecular mass in the high-velocity (+-(60 to 150 km/s)) gas lies between 2e6 Msun (light jet) and 2e7 Msun (massive jet). There is also CO emission extending along the minor axis of NGC1377. It holds >40% of the flux in NGC1377 and may be a slower, wide-angle molecular outflow which is partially entrained by the molecular jet. We discuss the driving mechanism of the molecular jet and suggest that it is either powered by a very faint radio jet or by an accretion disk-wind similar to those found towards protostars. The nucleus of NGC1377 harbours intense embedded activity and we detect emission from vibrationally excited HCN J=4-3 v_2=1f which is consistent with hot gas and dust. We find large columns of H2 in the centre of NGC1377 which may be a sign of a high rate of recent gas infall. The dynamical age of the molecular jet is short (<1 Myr), which could imply that it is young and consistent with the notion that NGC1377 is caught in a transient phase of its evolution. However, further studies are required to determine the age of the molecular jet, its mass and the role it is playing in the growth of the nucleus of NGC1377.

astro-ph.GA↗

arXiv2015

Reanalyses of Anomalous Gravitational Microlensing Events in the OGLE-III Early Warning System Database with Combined Data

We reanalyze microlensing events in the published list of anomalous events that were observed from the OGLE lensing survey conducted during 2004-2008 period. In order to check the existence of possible degenerate solutions and extract extra information, we conduct analyses based on combined data from other survey and follow-up observation and consider higher-order effects. Among the analyzed events, we present analyses of 8 events for which either new solutions are identified or additional information is obtained. We find that the previous binary-source interpretations of 5 events are better interpreted by binary-lens models. These events include OGLE-2006-BLG-238, OGLE-2007-BLG-159, OGLE-2007-BLG-491, OGLE-2008-BLG-143, and OGLE-2008-BLG-210. With additional data covering caustic crossings, we detect finite-source effects for 6 events including OGLE-2006-BLG-215, OGLE-2006-BLG-238, OGLE-2006-BLG-450, OGLE-2008-BLG-143, OGLE-2008-BLG-210, and OGLE-2008-BLG-513. Among them, we are able to measure the Einstein radii of 3 events for which multi-band data are available. These events are OGLE-2006-BLG-238, OGLE-2008-BLG-210, and OGLE-2008-BLG-513. For OGLE-2008-BLG-143, we detect higher-order effect induced by the changes of the observer's position caused by the orbital motion of the Earth around the Sun. In addition, we present degenerate solutions resulting from the known close/wide or ecliptic degeneracy. Finally, we note that the masses of the binary companions of the lenses of OGLE-2006-BLG-450 and OGLE-2008-BLG-210 are in the brown-dwarf regime.

astro-ph.EP↗

arXiv2014

OGLE-2013-BLG-0102LA,B: Microlensing binary with components at star/brown-dwarf and brown-dwarf/planet boundaries

We present the analysis of the gravitational microlensing event OGLE-2013-BLG-0102. The light curve of the event is characterized by a strong short-term anomaly superposed on a smoothly varying lensing curve with a moderate magnification $A_{\rm max}\sim 1.5$. It is found that the event was produced by a binary lens with a mass ratio between the components of $q = 0.13$ and the anomaly was caused by the passage of the source trajectory over a caustic located away from the barycenter of the binary. From the analysis of the effects on the light curve due to the finite size of the source and the parallactic motion of the Earth, the physical parameters of the lens system are determined. The measured masses of the lens components are $M_{1} = 0.096 \pm 0.013~M_{\odot}$ and $M_{2} = 0.012 \pm 0.002~M_{\odot}$, which correspond to near the hydrogen-burning and deuterium-burning mass limits, respectively. The distance to the lens is $3.04 \pm 0.31~{\rm kpc}$ and the projected separation between the lens components is $0.80 \pm 0.08~{\rm AU}$.

astro-ph.SR↗

arXiv2014

Time-resolved infrared emission from radiation-driven central obscuring structures in Active Galactic Nuclei

The central engines of Seyfert galaxies are thought to be enshrouded by geometrically thick gas and dust structures. In this article, we derive observable properties for a self-consistent model of such toroidal gas and dust distributions, where the geometrical thickness is achieved and maintained with the help of X-ray heating and radiation pressure due to the central engine. Spectral energy distributions (SEDs) and images are obtained with the help of dust continuum radiative transfer calculations with RADMC-3D. For the first time, we are able to present time-resolved SEDs and images for a physical model of the central obscurer. Temporal changes are mostly visible at shorter wavelengths, close to the combined peak of the dust opacity as well as the central source spectrum and are caused by variations in the column densities of the generated outflow. Due to the three-component morphology of the hydrodynamical models -- a thin disc with high density filaments, a surrounding fluffy component (the obscurer) and a low density outflow along the rotation axis -- we find dramatic differences depending on wavelength: whereas the mid-infrared images are dominated by the elongated appearance of the outflow cone, the long wavelength emission is mainly given by the cold and dense disc component. Overall, we find good agreement with observed characteristics, especially for those models, which show clear outflow cones in combination with a geometrically thick distribution of gas and dust, as well as a geometrically thin, but high column density disc in the equatorial plane.

astro-ph.GA↗

arXiv2014

A Terrestrial Planet in a ~1 AU Orbit Around One Member of a ~15 AU Binary

We detect a cold, terrestrial planet in a binary-star system using gravitational microlensing. The planet has low mass (2 Earth masses) and lies projected at $a_{\perp,ph}$ ~ 0.8 astronomical units (AU) from its host star, similar to the Earth-Sun distance. However, the planet temperature is much lower, T<60 Kelvin, because the host star is only 0.10--0.15 solar masses and therefore more than 400 times less luminous than the Sun. The host is itself orbiting a slightly more massive companion with projected separation $a_{\perp,ch}=$10--15 AU. Straightforward modification of current microlensing search strategies could increase their sensitivity to planets in binary systems. With more detections, such binary-star/planetary systems could place constraints on models of planet formation and evolution. This detection is consistent with such systems being very common.

astro-ph.EP↗

arXiv2014

MOA-2013-BLG-220Lb: Massive Planetary Companion to Galactic-Disk Host

We report the discovery of MOA-2013-BLG-220Lb, which has a super-Jupiter mass ratio $q=3.01\pm 0.02\times 10^{-3}$ relative to its host. The proper motion, $μ=12.5\pm 1\, {\rm mas}\,{\rm yr}^{-1}$, is one of the highest for microlensing planets yet discovered, implying that it will be possible to separately resolve the host within $\sim 7$ years. Two separate lines of evidence imply that the planet and host are in the Galactic disk. The planet could have been detected and characterized purely with follow-up data, which has important implications for microlensing surveys, both current and into the LSST era.

astro-ph.EP↗

arXiv2014

OGLE-2012-BLG-0455/MOA-2012-BLG-206: Microlensing event with ambiguity in planetary interpretations caused by incomplete coverage of planetary signal

Characterizing a microlensing planet is done from modeling an observed lensing light curve. In this process, it is often confronted that solutions of different lensing parameters result in similar light curves, causing difficulties in uniquely interpreting the lens system, and thus understanding the causes of different types of degeneracy is important. In this work, we show that incomplete coverage of a planetary perturbation can result in degenerate solutions even for events where the planetary signal is detected with a high level of statistical significance. We demonstrate the degeneracy for an actually observed event OGLE-2012-BLG-0455/MOA-2012-BLG-206. The peak of this high-magnification event $(A_{\rm max}\sim400)$ exhibits very strong deviation from a point-lens model with $Δχ^{2}\gtrsim4000$ for data sets with a total number of measurement 6963. From detailed modeling of the light curve, we find that the deviation can be explained by four distinct solutions, i.e., two very different sets of solutions, each with a two-fold degeneracy. While the two-fold (so-called "close/wide") degeneracy is well-understood, the degeneracy between the radically different solutions is not previously known. The model light curves of this degeneracy differ substantially in the parts that were not covered by observation, indicating that the degeneracy is caused by the incomplete coverage of the perturbation. It is expected that the frequency of the degeneracy introduced in this work will be greatly reduced with the improvement of the current lensing survey and follow-up experiments and the advent of new surveys.

astro-ph.EP↗

arXiv2014

OGLE-2008-BLG-355Lb: A Massive Planet around A Late type Star

We report the discovery of a massive planet OGLE-2008-BLG-355Lb. The light curve analysis indicates a planet:host mass ratio of q = 0.0118 +/- 0.0006 at a separation of 0.877 +/- 0.010 Einstein radii. We do not measure a significant microlensing parallax signal and do not have high angular resolution images that could detect the planetary host star. Therefore, we do not have a direct measurement of the host star mass. A Bayesian analysis, assuming that all host stars have equal probability to host a planet with the measured mass ratio implies a host star mass of M_h = 0.37_{-0.17}^{+0.30} M_Sun and a companion of mass M_P = 4.6^{+3.7}_{-2.2} M_Jup, at a projected separation of r_proj = 1.70^{+0.29}_{-0.30} AU. The implied distance to the planetary system is D_L = 6.8 +/- 1.1 kpc. A planetary system with the properties preferred by the Bayesian analysis would be a challenge to the core-accretion model of planet formation, as the core-accretion model predicts that massive planets are far more likely to form around more massive host stars. This core accretion model prediction is not consistent with our Bayesian prior of an equal probability of host stars of all masses to host a planet with the measured mass ratio. So, if the core accretion model prediction is right, we should expect that follow-up high angular resolution observations will detect a host star with a mass in the upper part of the range allowed by the Bayesian analysis. That is, the host would probably be a K or G dwarf.

astro-ph.EP↗