arXiv subjects

K. Yonehara

Publications and source records attributed to K. Yonehara.

At least 19 recordsLinked to original sources

arXiv2025

Challenges and Optimization of Mu2e Proton Target Design with Radiative Cooling

The Mu2e experiment at Fermilab will search for the charged lepton flavour violating process of coherent neutrinoless muon-to-electron conversion in the presence of an aluminum nucleus. The muons are produced by an 8 GeV proton beam from the Fermilab Booster striking a production target to create hadrons that decay to muons. The production target design space is strongly constrained by a required one-year operating lifetime and the need for radiative cooling in a vacuum. Uncertainties in the lifetime of the existing baseline design - a monolithic, segmented tungsten (WL10) target - are large, particularly due to unknown effects of radiation damage at the very high proton fluences expected in the experiment. We have begun evaluating a new design utilizing Inconel 718. Here, we present an engineering analysis of a prototype modular design. specifically thermal management, structural stability, fatigue lifetime, and fabrication changes. The results approve a promising new target design for the Mu2e experiment.

physics.acc-ph↗

arXiv2025

HEP High Power Targetry Roadmap -- Workshop Report

Designing a reliable target is already a challenge for MW-class facilities today and has led several major accelerator facilities to operate at lower than design power due to target concerns. With present plans to increase beam power for next generation accelerator facilities in the next decade, timely R and D in support of robust high power targets is critical to secure the full physics benefits of ambitious accelerator power upgrades. A comprehensive R and D program must be implemented to address the many complex challenges faced by multi MW beam intercepting devices. This roadmap is envisioned to be helpful to the DOE-OHEP office when planning and prioritizing future R and D activities as well as leveraging synergies across the Office of Science. The roadmap will be extremely beneficial to the broader (external to DOE HEP) HPT community by communicating OHEP s high level strategy and objectives for HPT R and D and highlighting possible opportunities for collaboration.

physics.acc-ph↗

arXiv2024

Updates and Lessons Learned from NuMI Beamline at Fermilab

The Neutrinos at the Main Injector (NuMI) beamline at Fermilab generates an intense muon neutrino beam for the NOvA (NuMI Off-axis $ν_e$ Appearance) long-baseline neutrino experiment. Over the years, the NuMI beamline has been pivotal in advancing neutrino physics, providing invaluable data and insights. This proceeding paper discusses updates and the lessons learned from recent experiences during the beam operations, maintenance, and monitoring of the NuMI beamline. Key topics include the optimization of beam performance and challenges in maintaining beamline stability. The paper aims to share best practices and provide a road-map for future beamline projects, including the Long-Baseline Neutrino Facility (LBNF).

physics.acc-ph↗

arXiv2024

Uniform Distribution Technique for Neutrino Beam Scan Simulation

In Fermilab's neutrino facilities such as the Neutrinos at the Main Injector (NuMI) and the upcoming Long Baseline Neutrino Facility (LBNF), a proton beam strikes high-power target, producing positively and negatively charged pions and kaons. There is a need for detailed simulations in order to capture all particle interactions and beam propagation from protons on target to short-lived mesons decaying into muons and neutrinos. The generation of individual beam simulations is a resource-intensive and time-consuming process. In this paper, we describe a method through which many simulation samples with high statistics can be generated to study the effects of beam scan across a target for given beam configurations.

physics.acc-ph↗

arXiv2022

Future Collider Options for the US

The United States has a rich history in high energy particle accelerators and colliders -- both lepton and hadron machines, which have enabled several major discoveries in elementary particle physics. To ensure continued progress in the field, U.S. leadership as a key partner in building next generation collider facilities abroad is essential; also critically important is the exploring of options to host a future collider in the U.S. The "Snowmass" study and the subsequent Particle Physics Project Prioritization Panel (P5) process provide the timely opportunity to develop strategies for both. What we do now will shape the future of our field and whether the U.S. will remain a world leader in these areas. In this white paper, we briefly discuss the US engagement in proposed collider projects abroad and describe future collider options for the U.S. We also call for initiating an integrated R\&D program for future colliders.

hep-ex↗

arXiv2020

High-statistics measurement of neutrino quasielastic-like scattering at =~6 GeV on a hydrocarbon target

We measure neutrino charged current quasielastic-like scattering on hydrocarbon at high statistics using the wide-band NuMI beam with neutrino energy peaked at 6 GeV. The double-differential cross section is reported in terms of muon longitudinal and transverse momentum. Cross-section contours versus lepton momentum components are approximately described by a conventional generator-based simulation, however discrepancies are observed for transverse momenta above 0.5 GeV/c for longitudinal momentum ranges 3 to 5 GeV/c and 9 to 20 GeV/c. The single differential cross section versus momentum transfer squared ($dσ/dQ_{QE}^2$) is measured over a four-decade range of $Q^2$ that extends to $10~GeV^2$. The cross section turn-over and fall-off in the $Q^2$ range 0.3 to $10~GeV^2$ is not fully reproduced by generator predictions that rely on dipole form factors. Our measurement probes the axial-vector content of the hadronic current and complements the electromagnetic form factor data obtained using electron-nucleon elastic scattering. These results help oscillation experiments because they probe the importance of various correlations and final-state interaction effects within the nucleus, which have different effects on the visible energy in detectors.

hep-ex↗

arXiv2020

Unconventional Ideas for Ionization Cooling of Muons

Small muon beams increase the luminosity of a muon collider. Reducing the momentum and position spreads of muons reduces emittance and leads to small, cool beams. Ionization cooling has been observed at the Muon Ionization Cooling Experiment. 6D emittance reduction by a factor of 100, 000 has been achieved in simulation. Another factor of 5 in cooling would meet the basic requirements of a high luminosity muon collider. In this paper we compare, for the first time, the amount of RF needed in a cooling channel to previous linacs. We also outline three methods aimed to help achieve a final factor of 5 in 6D cooling.

physics.acc-ph↗

arXiv2018

Pressurized rf cavities in ionizing beams

A muon collider or Higgs factory requires significant reduction of the six dimensional emittance of the beam prior to acceleration. One method to accomplish this involves building a cooling channel using high pressure gas filled radio frequency cavities. The performance of such a cavity when subjected to an intense particle beam must be investigated before this technology can be validated. To this end, a high pressure gas filled radio frequency (rf) test cell was built and placed in a 400 MeV beam line from the Fermilab linac to study the plasma evolution and its effect on the cavity. Hydrogen, deuterium, helium and nitrogen gases were studied. Additionally, sulfur hexafluoride and dry air were used as dopants to aid in the removal of plasma electrons. Measurements were made using a variety of beam intensities, gas pressures, dopant concentrations, and cavity rf electric fields, both with and without a 3 T external solenoidal magnetic field. Energy dissipation per electron-ion pair, electron-ion recombination rates, ion-ion recombination rates, and electron attachment times to $SF_6$ and $O_2$ were measured.

physics.acc-ph↗

arXiv2016

Interference effect between $ϕ$ and $Λ(1520)$ production channels in the $γp \rightarrow K^+K^-p$ reaction near threshold

The $ϕ$-$Λ(1520)$ interference effect in the $γp\to K^+K^-p$ reaction has been measured for the first time in the energy range from 1.673 to 2.173 GeV. The relative phases between $ϕ$ and $Λ(1520)$ production amplitudes were obtained in the kinematic region where the two resonances overlap. The measurement results support strong constructive interference when $K^+K^-$ pairs are observed at forward angles, but destructive interference for proton emission at forward angles. Furthermore, the observed interference effect does not account for the $\sqrt{s}=2.1$ GeV bump structure in forward differential cross sections for $ϕ$ photoproduction. This fact suggests possible exotic structures such as a hidden-strangeness pentaquark state, a new Pomeron exchange and rescattering processes via other hyperon states.

nucl-ex↗

arXiv2015

Magnetic design constraints of helical solenoids

Helical solenoids have been proposed as an option for a Helical Cooling Channel for muons in a proposed Muon Collider. Helical solenoids can provide the required three main field components: solenoidal, helical dipole, and a helical gradient. In general terms, the last two are a function of many geometric parameters: coil aperture, coil radial and longitudinal dimensions, helix period and orbit radius. In this paper, we present design studies of a Helical Solenoid, addressing the geometric tunability limits and auxiliary correction system.

physics.acc-ph↗

arXiv2014

Investigation Of Breakdown Induced Surface Damage On 805 Mhz Pillbox Cavity Interior Surfaces

The MuCool Test Area (MTA) at Fermilab is a facility to develop the technology required for ionization cooling for a future Muon Collider and/or Neutrino Factory. As part of this research program, we have tested two 805 MHz vacuum RF cavities in a multi-Tesla magnetic field to study the effects of the static magnetic field on the cavity operation. This study gives useful information on field emitters in the cavity, dark current, surface conditioning, breakdown mechanisms and material properties of the cavity. All these factors determine the maximum accelerating gradient in the cavity. This paper discusses the image processing technique for quantitative estimation of spark damage spot distribution on cavity interior surfaces. The distribution is compared with the electric field distribution predicted by a computer code calculation. The local spark density is proportional to probability of surface breakdown and shows a power law dependence on the maximum electric field (E). This E dependence is consistent with the dark current calculated from the Fowler-Nordheim equation.

physics.acc-ph↗

arXiv2014

Numerical Studies of Optimization and Aberration Correction Methods for the Preliminary Demonstration of the Parametric Ionization Cooling (PIC) Principle in the Twin Helix Muon Cooling Channel

Muon colliders have been proposed for the next generation of particle accelerators that study high-energy physics at the energy and intensity frontiers. In this paper we study a possible implementation of muon ionization cooling, Parametric-resonance Ionization Cooling (PIC), in the twin helix channel. The resonant cooling method of PIC offers the potential to reduce emittance beyond that achievable with ionization cooling with ordinary magnetic focusing. We examine optimization of a variety of parameters, study the nonlinear dynamics in the twin helix channel and consider possible methods of aberration correction.

physics.acc-ph↗

arXiv2013

Development of High Intensity Laser-Electron Photon Beams up to 2.9 GeV at the SPring-8 LEPS Beamline

A laser-Compton backscattering beam, which we call a `Laser-Electron Photon' beam, was upgraded at the LEPS beamline of SPring-8. We accomplished the gains in backscattered photon beam intensities by factors of 1.5--1.8 with the injection of two adjacent laser beams or a higher power laser beam into the storage ring. The maximum energy of the photon beam was also extended from 2.4 GeV to 2.9 GeV with deep-ultraviolet lasers. The upgraded beams have been utilized for hadron photoproduction experiments at the LEPS beamline. Based on the developed methods, we plan the simultaneous injection of four high power laser beams at the LEPS2 beamline, which has been newly constructed at SPring-8. As a simulation result, we expect an order of magnitude higher intensities close to 10$^7$ sec$^{-1}$ and 10$^6$ sec$^{-1}$ for tagged photons up to 2.4 GeV and 2.9 GeV, respectively.

physics.acc-ph↗

arXiv2013

Search for $K^-pp$ bound state via $γd \rightarrow K^+ π^-X$ reaction at $E_γ=1.5-2.4$ GeV

A search for $K^-pp$ bound state (the lightest kaonic nucleus) has been performed using the $γd \rightarrow K^+ π^- \rm{X}$ reaction at E$_γ$=1.5-2.4 GeV at LEPS/SPring-8. The differential cross section of $K^+ π^-$ photo-production off deuterium has been measured for the first time in this energy region, and a bump structure was searched for in the inclusive missing mass spectrum. A statistically significant bump structure was not observed in the region from 2.22 to 2.36 GeV/$c^2$, and the upper limits of the differential cross section for the $K^-pp$ bound state production were determined to be 0.1$-$0.7 $μ$ b (95$%$ confidence level) for a set of assumed binding energy and width values.

nucl-ex↗

arXiv2013

Conditioning and Future Plans for a Multi-purpose 805 MHz Pillbox Cavity for Muon Acceleration

An 805 MHz RF pillbox cavity has been designed and constructed to investigate potential muon beam acceleration and cooling techniques for a Muon Collider or Neutrino Factory. The cavity can operate in vacuum or under pressure to 100 atmospheres, at room temperature or in a liquid nitrogen bath at 77 K. The cavity has been designed for easy assembly and disassembly with bolted construction using aluminum seals. To perform vacuum and high pressure breakdown studies of materials and geometries most suitable for the collider or factory, the surfaces of the end walls of the cavity can be replaced with different materials such as copper, aluminum, beryllium, or molybdenum, and with different geometries such as shaped windows or grid structures. The cavity has been designed to fit inside the 5-Tesla solenoid in the MuCool Test Area at Fermilab. In this paper we present the vacuum conditioning results and discuss plans for testing in a 5-Tesla magnetic field. Additionally, we discuss the testing plan for beryllium (a material research has shown to be ideal for the collider or factory) end walls.

physics.acc-ph↗

arXiv2012

Helical channel design and technology for cooling of muon beams

Novel magnetic helical channel designs for capture and cooling of bright muon beams are being developed using numerical simulations based on new inventions such as helical solenoid (HS) magnets and hydrogen-pressurized RF (HPRF) cavities. We are close to the factor of a million six-dimensional phase space (6D) reduction needed for muon colliders. Recent experimental and simulation results are presented.

physics.acc-ph↗

arXiv2012

A Helical Cooling Channel System for Muon Colliders

Fast muon beam six dimensional (6D) phase space cooling is essential for muon colliders. The Helical Cooling Channel (HCC) uses hydrogen-pressurized RF cavities imbedded in a magnet system with solenoid, helical dipole, and helical quadrupole components that provide the continuous dispersion needed for emittance exchange and effective 6D beam cooling. A series of HCC segments, each with sequentially smaller aperture, higher magnetic field, and higher RF frequency to match the beam size as it is cooled, has been optimized by numerical simulation to achieve a factor of 105 emittance reduction in a 300 m long channel with only a 40% loss of beam. Conceptual designs of the hardware required for this HCC system and the status of the RF studies and HTS helical solenoid magnet prototypes are described.

physics.acc-ph↗

arXiv2010

Measurement of Spin-Density Matrix Elements for $ϕ$-Meson Photoproduction from Protons and Deuterons Near Threshold

The LEPS/SPring-8 experiment made a comprehensive measurement of the spin-density matrix elements for $γp \to ϕp$, $γd \to ϕp n$ and $γd \to ϕd$ at forward production angles. A linearly polarized photon beam at $E_γ$=1.6-2.4 GeV was used for the production of $ϕ$ mesons. The natural-parity Pomeron exchange processes remains dominant nearthreshold. The unnatural-parity processes of pseudoscalar exchange is visible in the production from nucleons but is greatly reduced in the coherent production from deuterons. There is no strong $E_γ$-dependence, but some dependence on momentum-transfer. A small but finite value of the spin-density matrix elements reflecting helicity-nonconserving amplitudes in the $t$-channel is observed.

nucl-ex↗