arXiv subjects

K. Ziętara

Publications and source records attributed to K. Ziętara.

4 recordsLinked to original sources

arXiv2025

Observation of the Crab Nebula with the Single-Mirror Small-Size Telescope stereoscopic system at low altitude

The Single-Mirror Small-Size Telescope (SST-1M) stereoscopic system is composed of two Imaging Atmospheric Cherenkov Telescopes (IACTs) designed for optimal performance for gamma-ray astronomy in the multi-TeV energy range. It features a 4-meter-diameter tessellated mirror dish and an innovative SiPM-based camera. Its optical system features a 4-m diameter spherical mirror dish based on the Davies-Cotton design, maintaining a good image quality over a large FoV while minimizing optical aberrations. In 2022, two SST-1M telescopes were installed at the Ondřejov Observatory, Czech Republic, at an altitude of 510 meters above sea level, and have been collecting data for commissioning and astronomical observations since then. We present the first SST-1M observations of the Crab Nebula, conducted between September 2023 and March 2024 in both mono and stereoscopic modes. During this observation period, 46 hours for the SST-1M-1 and 52 hours for the SST-1M-2 were collected for which 33 hours are in stereoscopic mode. We use the Crab Nebula observation to validate the expected performance of the instrument, as evaluated by Monte Carlo simulations carefully tuned to account for instrumental and atmospheric effects. We determined that the energy threshold at the analysis level for the zenith angles below $30^\circ$ is 1 TeV for mono mode and 1.3 TeV for stereo mode. The energy and angular resolutions are approximately 20% and $0.18^\circ$ for mono mode and 10% and $0.10^\circ$ for stereo mode, respectively. We present the off-axis performance of the instrument and a detailed study of systematic uncertainties. The results of a full simulation of the telescope and its camera is compared to the data for the first time, allowing a deep understanding of the SST-1M array performance.

astro-ph.IM↗

arXiv2015

Using muon rings for the optical throughput calibration of the SST-1M prototype for the Cherenkov Telescope Array

Imaging Atmospheric Cherenkov Telescopes (IACTs) are ground-based instruments devoted to the study of very high energy gamma-rays coming from space. The detection technique consists of observing images created by the Cherenkov light emitted when gamma rays, or more generally cosmic rays, propagate through the atmosphere. While in the case of protons or gamma-rays the images present a filled and more or less elongated shape, energetic muons penetrating the atmosphere are visualised as characteristic circular rings or arcs. A relatively simple analysis of the ring images allows the reconstruction of all the relevant parameters of the detected muons, such as the energy, the impact parameter, and the incoming direction, with the final aim to use them to calibrate the total optical throughput of the given IACT telescope. We present the results of preliminary studies on the use of images created by muons as optical throughput calibrators of the single mirror small size telescope prototype SST-1M proposed for the Cherenkov Telescope Array.

astro-ph.IM↗

arXiv2015

Camera calibration strategy of the SST-1M prototype of the Cherenokov Telescope Array

The SST-1M telescope is one of the prototypes under construction proposed to be part of the future Cherenkov Telescope Array. It uses a standard Davis-Cotton design for the optics and telescope structure, with a dish diameter of 4 meters and a large field-of-view of 9 degrees. The innovative camera design is composed of a photo-detection plane with 1296 pixels including entrance window, light concentrators, Silicon Photomultipliers (SiPMs), and pre-amplifier stages together with a fully digital readout and trigger electronics, DigiCam. In this contribution we give a general description of the analysis chain designed for the SST-1M prototype. In particular we focus on the calibration strategy used to convert the SiPM signals registered by DigiCam to the quantities needed for Cherenkov image analysis. The calibration is based on an online feedback system to stabilize the gain of the SiPMs, as well as dedicated events (dark count, pedestal, and light flasher events) to be taken during the normal operation of the prototype.

astro-ph.IM↗

arXiv2015

DigiCam - Fully Digital Compact Read-out and Trigger Electronics for the SST-1M Telescope proposed for the Cherenkov Telescope Array

The SST-1M is one of three prototype small-sized telescope designs proposed for the Cherenkov Telescope Array, and is built by a consortium of Polish and Swiss institutions. The SST-1M will operate with DigiCam - an innovative, compact camera with fully digital read-out and trigger electronics. A high level of integration will be achieved by massively deploying state-of-the-art multi-gigabit transmission channels, beginning from the ADC flash converters, through the internal data and trigger signals transmission over backplanes and cables, to the camera's server link. Such an approach makes it possible to design the camera to fit the size and weight requirements of the SST-1M exactly, and provide low power consumption, high reliability and long lifetime. The structure of the digital electronics will be presented, along with main physical building blocks and the internal architecture of FPGA functional subsystems.

astro-ph.IM↗