arXiv subjects

Kabir Bakhshaei

Publications and source records attributed to Kabir Bakhshaei.

6 recordsLinked to original sources

arXiv2026

Machine-Learning-Enhanced Discretize-then-Project Reduced-Order Modeling of Turbulent Flows on Collocated Grids

This study presents a hybrid reduced-order modeling (ROM) framework for incompressible flows on collocated finite-volume grids, combining a discretize-then-project consistent-flux formulation for velocity and pressure with a non-intrusive neural-network closure for turbulent viscosity. The intrusive formulation preserves discrete mass conservation and pressure-velocity coupling, while a reduced pressure reference-cell constraint fixes pressure gauge ambiguity. We evaluate Multilayer Perceptron (MLP), Transformer, and Long Short-Term Memory (LSTM) closures. For a three-dimensional lid-driven cavity at $Re=100$, the LSTM-based ROM achieves relative errors of 0.7% in velocity and 4% in turbulent viscosity. At $Re=3200$, a mode-sensitivity study identifies $N=15$ POD modes as the best overall configuration, balancing accuracy, dimension, robustness, and cost. It yields a final relative velocity error of approximately 12.3% and an online wall-clock speedup of approximately $50\times$ over the full-order model; energy and enstrophy errors remain below 11% for all three architectures. This regime requires case-specific neural-network retraining and pressure reference-cell parameter retuning. In a time-extrapolation test trained on $t\in[0,3]$,s and rolled out to $t=6$,s, the ROM remains bounded, although velocity and pressure errors increase beyond the training window. The LSTM turbulent-viscosity closure remains robust, identifying long-horizon pressure accuracy as the main limitation. These results demonstrate the potential of consistent projection-based modeling combined with data-driven turbulence closure for efficient reduced-order simulation.

math.NA↗

arXiv2026

SerenAI: State-transition system inspired by text-based world AI models

Although professional workflows leverage large language models widely, the interpretation for auditing unconstrained free-text generation is usually intractable if such generation demands legal, operational or financial workflow. We hereby demonstrate a text based system called SerenAI - inspired by world-models, it is a state transition system that outputs verifiable predictions rather than merely text: Provided with a description of the environment, state, and actions, the generated output contains 4 items: causal deltas that causally effect the given state, a next state that can logically follow from the given state and action, a validity reward, and a termination signal. For the released proto-model, we employ 2 steps of adaptation training, namely parameter efficient fine-tuning followed by verifier based RL over 50,000 exampled cause and effects in 12 environments spanning 10 reasoning domains. Compared to an initial internal evaluation of an 8B open-weight baseline, SerenAI increased JSON validity from 85.0% to 93.2%, schema validity from 55.0% to 84.0%, exact structured-output match from 0.0% to 41.5%, causal-delta exact match from 0.0% to 41.5%, resulting-state exact match from 0.0% to 42.0%, reward exact match from 1.0% to 80.5%, and termination exact match from 38.0% to 81.5%. These support the narrower claim that verifier-compatible adaptation can improve structured transition prediction. They do not yet establish legal-grade reliability. Accordingly, the paper also specifies a validation protocol for evidence-grounded legal workflows, calibration, human oversight, and sovereign on-premise deployment.

cs.AI↗

arXiv2026

Model Order Reduction of Cerebrovascular Hemodynamics Using POD_Galerkin and Reservoir Computing_based Approach

We investigate model order reduction (MOR) strategies for simulating unsteady hemodynamics within cerebrovascular systems, contrasting a physics-based intrusive approach with a data-driven non-intrusive framework. High-fidelity 3D Computational Fluid Dynamics (CFD) snapshots of an idealised basilar artery bifurcation are first compressed into a low-dimensional latent space using Proper Orthogonal Decomposition (POD). We evaluate the performance of a POD-Galerkin (POD-G) model, which projects the Navier-Stokes equations onto the reduced basis, against a POD-Reservoir Computing (POD-RC) model that learns the temporal evolution of coefficients through a recurrent architecture. A multi-harmonic and multi-amplitude training signal is introduced to improve training efficiency. Both methodologies achieve computational speed-ups on the order of 10^2 to 10^3 compared to full-order simulations, demonstrating their potential as efficient and accurate surrogates for predicting flow quantities such as wall shear stress.

math.NA↗

arXiv2024

Stochastic Parameter Prediction in Cardiovascular Problems

Patient-specific modeling of cardiovascular flows with high-fidelity is challenging due to its dependence on accurately estimated velocity boundary profiles, which are essential for precise simulations and directly influence wall shear stress calculations - key in predicting cardiovascular diseases like atherosclerosis. This data, often derived from in vivo modalities like 4D flow MRI, suffers from low resolution and noise. To address this, we employ a stochastic data assimilation technique that integrates computational fluid dynamics with an advanced Ensemble-based Kalman filter, enhancing model accuracy while accounting for uncertainties. Our approach sequentially collects velocity data over time within the vascular model, enabling real-time refinement of unknown boundary estimations. The mathematical model uses the incompressible Navier-Stokes equation to simulate aortic blood flow. We consider unknown boundaries as constant, time-dependent, and space-time dependent in two- and three-dimensional models. In our 2-dimensional model, relative errors were as low as 0.996\% for constant boundaries and up to 2.63\% and 2.61\% for time-dependent and space-time dependent boundaries, respectively, over an observation span of two-time steps. For the 3-dimensional patient-specific model, the relative error was 7.37\% for space-time dependent boundaries. By refining the velocity boundary profile, our method improves wall shear stress predictions, enhancing the accuracy and reliability of models specific to individual cardiovascular patients. These advancements could contribute to better diagnosis and treatment of cardiovascular diseases.

math.NA↗

arXiv2024

Modal Analysis of the Wake Shed Behind a Horizontal Axis Wind Turbine with Flexible Blades

The proper orthogonal decomposition has been applied on a full-scale horizontal-axis wind turbine to shed light on the wake characteristics behind the wind turbine. In reality, the blade tip experiences high deflections even at the rated conditions which definitely alter the wake flow field, and in the case of a wind farm, may complicate the inlet conditions of the downstream wind turbine. The turbine under consideration is the full-scale model of the National Renewable Energy Laboratory 5MW onshore wind turbine which is accompanied by several simulation complexities including turbulence, mesh motion and fluid-structure interaction. Results indicated an almost similar modal behaviour for the rigid and flexible turbines at the wake region. In addition, more flow structures in terms of local vortices and fluctuating velocity fields take place at the far wake region. The flow structures due to the wake shed from the tower tend to move towards the center and merge with that of the nacelle leading to an integral vortical structure 2.5 diameter away from the rotor. Also, it is concluded that the exclusion of the tower leads to missing a major part of the wake structures, especially at far-wake positions.

math.NA↗

arXiv2024

Optimized Bayesian Framework for Inverse Heat Transfer Problems Using Reduced Order Methods

A stochastic inverse heat transfer problem is formulated to infer the transient heat flux, treated as an unknown Neumann boundary condition. Therefore, an Ensemble-based Simultaneous Input and State Filtering as a Data Assimilation technique is utilized for simultaneous temperature distribution prediction and heat flux estimation. This approach is incorporated with Radial Basis Functions not only to lessen the size of unknown inputs but also to mitigate the computational burden of this technique. The procedure applies to the specific case of a mold used in Continuous Casting machinery, and it is based on the sequential availability of temperature provided by thermocouples inside the mold. Our research represents a significant contribution to achieving probabilistic boundary condition estimation in real-time handling with noisy measurements and errors in the model. We additionally demonstrate the procedure's dependence on some hyperparameters that are not documented in the existing literature. Accurate real-time prediction of the heat flux is imperative for the smooth operation of Continuous Casting machinery at the boundary region where the Continuous Casting mold and the molten steel meet which is not also physically measurable. Thus, this paves the way for efficient real-time monitoring and control, which is critical for preventing caster shutdowns.

math.NA↗