arXiv subjects

Kai Leong Chong

Publications and source records attributed to Kai Leong Chong.

39 records · Page 3Linked to original sources

arXiv2018

Multiple-resolution scheme in finite-volume code for active or passive scalar turbulence

In scalar turbulence it is sometimes the case that the scalar diffusivity is smaller than the viscous diffusivity. The thermally-driven turbulent convection in water is a typical example. In such a case the smallest scale in the problem is the Batchelor scale $l_b$, rather than the Kolmogorov scale $l_k$, as $l_b = l_k/Sc^{1/2}$, where Sc is the Schmidt number (or Prandtl number in the case of temperature). In the numerical studies of such scalar turbulence, the conventional approach is to use a single grid for both the velocity and scalar fields. Such single-resolution scheme often over-resolves the velocity field because the resolution requirement for scalar is higher than that for the velocity field, since $l_b 1$. In this paper we put forward an algorithm that implements the so-called multiple-resolution method with a finite-volume code. In this scheme, the velocity and pressure fields are solved in a coarse grid, while the scalar field is solved in a dense grid. The central idea is to implement the interpolation scheme on the framework of finite-volume to reconstruct the divergence-free velocity from the coarse to the dense grid. We demonstrate our method using a canonical model system of fluid turbulence, the Rayleigh-Bénard convection. We show that, with the tailored mesh design, considerable speed-up for simulating scalar turbulence can be achieved, especially for large Schmidt (Prandtl) numbers. In the same time, sufficient accuracy of the scalar and velocity fields can be achived by this multiple-resolution scheme. Although our algorithm is demonstrated with a case of an active scalar, it can be readily applied to passive scalar turbulent flows.

physics.flu-dyn↗

arXiv2017

Effect of Prandtl number on heat transport enhancement in Rayleigh-Bénard convection under geometrical confinement

We study, using direct numerical simulations, the effect of geometrical confinement on heat transport and flow structure in Rayleigh-Bénard convection in fluids with different Prandtl numbers. Our simulations span over two decades of Prandtl number $Pr$, $0.1 \leq Pr \leq 40$, with the Rayleigh number $Ra$ fixed at $10^8$. The width-to-height aspect ratio $Γ$ spans between $0.025$ and $0.25$ while the length-to-height aspect ratio is fixed at one. We first find that for $Pr \geq 0.5$, geometrical confinement can lead to a significant enhancement in heat transport as characterized by the Nusselt number $Nu$. For those cases, $Nu$ is maximal at a certain $Γ= Γ_{opt}$. It is found that $Γ_{opt}$ exhibits a power-law relation with $Pr$ as $Γ_{opt}=0.11Pr^{-0.06}$, and the maximal relative enhancement generally increases with $Pr$ over the explored parameter range. As opposed to the situation of $Pr \geq 0.5$, confinement-induced enhancement in $Nu$ is not realized for smaller values of $Pr$, such as $0.1$ and $0.2$. The $Pr$ dependence of the heat transport enhancement can be understood in its relation to the coverage area of the thermal plumes over the thermal boundary layer (BL) where larger coverage is observed for larger $Pr$ due to a smaller thermal diffusivity. We further show that $Γ_{opt}$ is closely related to the crossing of thermal and momentum BLs, and find that $Nu$ declines sharply when the thickness ratio of the thermal and momentum BLs exceeds a certain value of about one. In addition, through examining the temporally averaged flow fields and 2D mode decomposition, it is found that for smaller $Pr$ the large-scale circulation is robust against the geometrical confinement of the convection cell.

physics.flu-dyn↗

arXiv2017

Confined Rayleigh-Bénard, Rotating Rayleigh-Bénard, and Double Diffusive Convection: A unifying view on turbulent transport enhancement through coherent structure manipulation

Many natural and engineering systems are simultaneously subjected to a driving force and a stabilizing force. The interplay between the two forces, especially for highly nonlinear systems such as fluid flow, often results in surprising features. Here we reveal such features in three different types of Rayleigh-Bénard (RB) convection, i.e. buoyancy-driven flow with the fluid density being affected by a scalar field. In the three cases different {\it stabilizing forces} are considered, namely (i) horizontal confinement, (ii) rotation around a vertical axis, and (iii) a second stabilizing scalar field. Despite the very different nature of the stabilizing forces and the corresponding equations of motion, at moderate strength we counterintuitively but consistently observe an {\it enhancement} in the flux, even though the flow motion is weaker than the original RB flow. The flux enhancement occurs in an intermediate regime in which the stabilizing force is strong enough to alter the flow structures in the bulk to a more organised morphology, yet not too strong to severely suppress the flow motions. Near the optimal transport enhancements all three systems exhibit a transition from a state in which the thermal boundary layer (BL) is nested inside the momentum BL to the one with the thermal BL being thicker than the momentum BL.

physics.flu-dyn↗