arXiv subjects

Kai-Ten Feng

Publications and source records attributed to Kai-Ten Feng.

At least 19 recordsLinked to original sources

arXiv2026

FSIM: Fluid Element Stacked Intelligent Metasurface for Multiuser Downlink Networks

A fluid element (FE)-aided stacked intelligent metasurface (FSIM) for multiple-input single-output (MISO) communication system is investigated, where a multi-antenna base station (BS) serves multiple single-antenna users through FSIM. Unlike conventional SIM with fixed meta-atom deployment, the architecture allows the meta-atoms in each layer to move within a predefined fluidic region to further increase the spatial diversity. By jointly optimizing the two-dimensional meta-atom positions, BS transmit beamforming, and FSIM phase-shifts, the cascaded BS-FSIM-user channels can be flexibly reconfigured to enhance the desired signals and suppress multiuser interference. The proposed sum-rate maximization problem is highly non-convex and nonlinear due to the coupled solutions of element position, beamforming, and phase-shift. To address this challenge, an alternating optimization (AO) algorithm is developed to iteratively update these variables. The beamforming and FSIM phase-shift subproblems are transformed into semi-definite programming problems and solved by using successive convex approximation (SCA), first-order Taylor approximation, and penalty-based rank-one relaxation, whilst the FE position subproblem is handled through a projected gradient-based update. Simulation results reveal that a compact FSIM with a small inter-layer thickness is preferable, as increasing the thickness weakens inter-layer coupling and degrades the achievable sum rate. Results also demonstrate that the proposed FSIM significantly outperforms conventional SIMs with fixed positions, patch-based structures, partial fluidity, restricted fluid regions, and existing flexible intelligent metasurfaces. Furthermore, the proposed AO-based algorithm achieves superior rate performance compared to sub-schemes, metaheuristic methods, and conventional beamforming benchmarks.

eess.SP↗

arXiv2025

Federated Deep Reinforcement Learning for Energy Efficient Multi-Functional RIS-Assisted Low-Earth Orbit Networks

In this paper, a novel network architecture that deploys the multi-functional reconfigurable intelligent surface (MF-RIS) in low-Earth orbit (LEO) is proposed. Unlike traditional RIS with only signal reflection capability, the MF-RIS can reflect, refract, and amplify signals, as well as harvest energy from wireless signals. Given the high energy demands in shadow regions where solar energy is unavailable, MF-RIS is deployed in LEO to enhance signal coverage and improve energy efficiency (EE). To address this, we formulate a long-term EE optimization problem by determining the optimal parameters for MF-RIS configurations, including amplification and phase-shifts, energy harvesting ratios, and LEO transmit beamforming. To address the complex non-convex and non-linear problem, a federated learning enhanced multi-agent deep deterministic policy gradient (FEMAD) scheme is designed. Multi-agent DDPG of each agent can provide the optimal action policy from its interaction to environments, whereas federated learning enables the hidden information exchange among multi-agents. In numerical results, we can observe significant EE improvements compared to the other benchmarks, including centralized deep reinforcement learning as well as distributed multi-agent deep deterministic policy gradient (DDPG). Additionally, the proposed LEO-MF-RIS architecture has demonstrated its effectiveness, achieving the highest EE performance compared to the scenarios of fixed/no energy harvesting in MF-RIS, traditional reflection-only RIS, and deployment without RISs/MF-RISs.

cs.LG↗

arXiv2024

Energy Efficient Beamforming Training in Terahertz Communication Systems

Terahertz (THz) enables promising Tbps-level wireless transmission thanks to its prospect of ultra-huge spectrum utilization and narrow beamforming in the next sixth-generation (6G) communication system. Compared to millimeter wave (mmWave), THz intrinsically possesses compellingly severer molecular absorption and high pathloss serving confined coverage area. These defects should be well conquered under the employment of ultra-thin 3D beamforming with enormous deployed antennas with high beam gains. However, pencil-beams require substantially high overhead of time and power to train its optimal THz beamforming direction. We propose an energy efficient (EE) oriented THz beamforming (EETBF) scheme by separating the original complex problem into beamforming training (EETBF-BT) acquirement and learning-enabled training power assignment (EETBF-PA). The historical beam data is employed to update next beam selection policy. The performance results have demonstrated that the proposed EETBF outperforms the existing benchmarks leveraging full beam search, iterative search, linear/binary search as well as non-power-control based mechanism in open literature. Our proposed EETBF scheme results in the lowest training latency and power consumption, achieving the highest effective rate and EE performance.

cs.IT↗

arXiv2024

Multi-Agent Deep Reinforcement Learning for Energy Efficient Multi-Hop STAR-RIS-Assisted Transmissions

Simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) provides a promising way to expand coverage in wireless communications. However, limitation of single STAR-RIS inspire us to integrate the concept of multi-hop transmissions, as focused on RIS in existing research. Therefore, we propose the novel architecture of multi-hop STAR-RISs to achieve a wider range of full-plane service coverage. In this paper, we intend to solve active beamforming of the base station and passive beamforming of STAR-RISs, aiming for maximizing the energy efficiency constrained by hardware limitation of STAR-RISs. Furthermore, we investigate the impact of the on-off state of STAR-RIS elements on energy efficiency. To tackle the complex problem, a Multi-Agent Global and locAl deep Reinforcement learning (MAGAR) algorithm is designed. The global agent elevates the collaboration among local agents, which focus on individual learning. In numerical results, we observe the significant improvement of MAGAR compared to the other benchmarks, including Q-learning, multi-agent deep Q network (DQN) with golbal reward, and multi-agent DQN with local rewards. Moreover, the proposed architecture of multi-hop STAR-RISs achieves the highest energy efficiency compared to mode switching based STAR-RISs, conventional RISs and deployment without RISs or STAR-RISs.

cs.LG↗

arXiv2024

MARS: Message Passing for Antenna and RF Chain Selection for Hybrid Beamforming in MIMO Communication Systems

In this paper, we consider a prospective receiving hybrid beamforming structure consisting of several radio frequency (RF) chains and abundant antenna elements in multi-input multi-output (MIMO) systems. Due to conventional costly full connections, we design an enhanced partially connected beamformer employing a low-density parity-check (LDPC)-based structure. As a benefit of the LDPC-based structure, information can be exchanged among clustered RF/antenna groups, which results in a low computational complexity order. Advanced message passing (MP) capable of inferring and transferring information among different paths is designed to support the LDPC-based hybrid beamformer. We propose a message-passing enhanced antenna and RF chain selection (MARS) scheme for minimizing the operational power of antennas and RF chains of the receiver as well as hybrid beamforming. Furthermore, sequential and parallel MP schemes for MARS are designed, namely, MARS-S and MARS-P, respectively, to address the convergence speed issue. A heuristic genetic algorithm is designed for receiving hybrid beamforming, comprising gene generation initialization, elite selection, crossover, and mutation. Simulations validate the convergence of both the MARS-P and the MARS-S algorithms. Due to the asynchronous information transfer of MARS-P, it requires higher power than MARS-S, which strikes a compelling balance among power consumption, convergence, and computational complexity. It is also demonstrated that the proposed MARS scheme outperforms the existing benchmarks using the heuristic method of fully/partially connected architectures in the open literature by requiring the lowest power and realizing the highest energy efficiency.

cs.IT↗

arXiv2024

Attention-Enhanced Deep Learning for Device-Free Through-the-Wall Presence Detection Using Indoor WiFi Systems

Accurate detection of human presence in indoor environments is important for various applications, such as energy management and security. In this paper, we propose a novel system for human presence detection using the channel state information (CSI) of WiFi signals. Our system named attention-enhanced deep learning for presence detection (ALPD) employs an attention mechanism to automatically select informative subcarriers from the CSI data and a bidirectional long short-term memory (LSTM) network to capture temporal dependencies in CSI. Additionally, we utilize a static feature to improve the accuracy of human presence detection in static states. We evaluate the proposed ALPD system by deploying a pair of WiFi access points (APs) for collecting CSI dataset, which is further compared with several benchmarks. The results demonstrate that our ALPD system outperforms the benchmarks in terms of accuracy, especially in the presence of interference. Moreover, bidirectional transmission data is beneficial to training improving stability and accuracy, as well as reducing the costs of data collection for training. To elaborate a little further, we have also evaluated the potential of ALPD for detecting more challenging human activities in multi-rooms. Overall, our proposed ALPD system shows promising results for human presence detection using WiFi CSI signals.

cs.LG↗

arXiv2024

D-STAR: Dual Simultaneously Transmitting and Reflecting Reconfigurable Intelligent Surfaces for Joint Uplink/Downlink Transmission

The joint uplink/downlink (JUD) design of simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) is conceived in support of both uplink (UL) and downlink (DL) users. Furthermore, the dual STAR-RISs (D-STAR) concept is conceived as a promising architecture for 360-degree full-plane service coverage, including UL/DL users located between the base station (BS) and the D-STAR as well as beyond. The corresponding regions are termed as primary (P) and secondary (S) regions. Both BS/users exist in the P-region, but only users are located in the S-region. The primary STAR-RIS (STAR-P) plays an important role in terms of tackling the P-region inter-user interference, the self-interference (SI) from the BS and from the reflective as well as refractive UL users imposed on the DL receiver. By contrast, the secondary STAR-RIS (STAR-S) aims for mitigating the S-region interferences. The non-linear and non-convex rate-maximization problem formulated is solved by alternating optimization amongst the decomposed convex sub-problems of the BS beamformer, and the D-STAR amplitude as well as phase shift configurations. We also propose a D-STAR based active beamforming and passive STAR-RIS amplitude/phase (DBAP) optimization scheme to solve the respective sub-problems by Lagrange dual with Dinkelbach's transformation, alternating direction method of multipliers (ADMM) with successive convex approximation (SCA), and penalty convex-concave procedure (PCCP). Our simulation results reveal that the proposed D-STAR architecture outperforms the conventional single RIS, single STAR-RIS, and half-duplex networks. The proposed DBAP of D-STAR outperforms the state-of-the-art solutions found in the open literature for different numbers of quantization levels, geographic deployment, transmit power and for diverse numbers of transmit antennas, patch partitions as well as D-STAR elements.

cs.IT↗

arXiv2023

Time-Selective RNN for Device-Free Multi-Room Human Presence Detection Using WiFi CSI

Device-free human presence detection is a crucial technology for various applications, including home automation, security, and healthcare. While camera-based systems have traditionally been used for this purpose, they raise privacy concerns. To address this issue, recent research has explored the use of wireless channel state information (CSI) extracted from commercial WiFi access points (APs) to provide detailed channel characteristics. In this paper, we propose a device-free human presence detection system for multi-room scenarios using a time-selective conditional dual feature extract recurrent network (TCD-FERN). Our system is designed to capture significant time features on current human features using a dynamic and static data preprocessing technique. We extract both moving and spatial features of people and differentiate between line-of-sight (LoS) and non-line-of-sight (NLoS) cases. Subcarrier fusion is carried out in order to provide more objective variation of each sample while reducing the computational complexity. A voting scheme is further adopted to mitigate the feature attenuation problem caused by room partitions, with around 3% improvement of human presence detection accuracy. Experimental results have revealed the significant improvement of leveraging subcarrier fusion, dual-feature recurrent network, time selection and condition mechanisms. Compared to the existing works in open literature, our proposed TCD-FERN system can achieve above 97% of human presence detection accuracy for multi-room scenarios with the adoption of fewer WiFi APs.

cs.AI↗

arXiv2023

Robust Active and Passive Beamforming for RIS-Assisted Full-Duplex Systems under Imperfect CSI

The sixth-generation (6G) wireless technology recognizes the potential of reconfigurable intelligent surfaces (RIS) as an effective technique for intelligently manipulating channel paths through reflection to serve desired users. Full-duplex (FD) systems, enabling simultaneous transmission and reception from a base station (BS), offer the theoretical advantage of doubled spectrum efficiency. However, the presence of strong self-interference (SI) in FD systems significantly degrades performance, which can be mitigated by leveraging the capabilities of RIS. Moreover, accurately obtaining channel state information (CSI) from RIS poses a critical challenge. Our objective is to maximize downlink (DL) user data rates while ensuring quality-of-service (QoS) for uplink (UL) users under imperfect CSI from reflected channels. To address this, we propose a robust active BS and passive RIS beamforming (RAPB) scheme for RIS-FD, accounting for both SI and imperfect CSI. RAPB incorporates distributionally robust design, conditional value-at-risk (CVaR), and penalty convex-concave programming (PCCP) techniques. Simulation results demonstrate the UL/DL rate improvement are achieved by considering different levels of imperfect CSI. The proposed RAPB schemes validate their effectiveness across different RIS deployments and RIS/BS configurations. Benefited from robust beamforming, RAPB outperforms the existing methods in terms of non-robustness, deployment without RIS, conventional approximation, and half-duplex systems.

cs.IT↗

arXiv2023

WiRiS: Transformer for RIS-Assisted Device-Free Sensing for Joint People Counting and Localization using Wi-Fi CSI

Channel State Information (CSI) is widely adopted as a feature for indoor localization. Taking advantage of the abundant information from the CSI, people can be accurately sensed even without equipped devices. However, the positioning error increases severely in non-line-of-sight (NLoS) regions. Reconfigurable intelligent surface (RIS) has been introduced to improve signal coverage in NLoS areas, which can re-direct and enhance reflective signals with massive meta-material elements. In this paper, we have proposed a Transformer-based RIS-assisted device-free sensing for joint people counting and localization (WiRiS) system to precisely predict the number of people and their corresponding locations through configuring RIS. A series of predefined RIS beams is employed to create inputs of fingerprinting CSI features as sequence-to-sequence learning database for Transformer. We have evaluated the performance of proposed WiRiS system in both ray-tracing simulators and experiments. Both simulation and real-world experiments demonstrate that people counting accuracy exceeds 90\%, and the localization error can achieve the centimeter-level, which outperforms the existing benchmarks without employment of RIS.

eess.SP↗

arXiv2023

Downlink Rate Maximization with Reconfigurable Intelligent Surface Assisted Full-Duplex Transmissions

Reconfigurable intelligent surfaces (RIS) as an effective technique for intelligently manipulating channel paths through reflection to serve desired users. Full-duplex (FD) systems, enabling simultaneous transmission and reception from a base station (BS), offer the theoretical advantage of doubled spectrum efficiency. However, the presence of strong self-interference (SI) in FD systems significantly degrades performance, which can be mitigated by leveraging the capabilities of RIS. In this work, we consider joint BS and RIS beamforming for maximizing the downlink (DL) transmission rate while guaranteeing uplink (UL) rate requirement. We propose an FD-RIS beamforming (FRIS) scheme by adopting penalty convex-concave programming. Simulation results demonstrate the UL/DL rate improvements achieved by considering various levels of imperfect CSI. The proposed FRIS scheme validates their effectiveness across different RIS deployments and RIS/BS configurations. FRIS has achieved the highest rate compared to the other approximation method, conventional beamforming techniques, HD systems, and deployment without RIS.

cs.IT↗

arXiv2023

AI-Enabled Unmanned Vehicle-Assisted Reconfigurable Intelligent Surfaces: Deployment, Prototyping, Experiments, and Opportunities

The requirement of wireless data demands is increasingly high as the sixth-generation (6G) technology evolves. Reconfigurable intelligent surface (RIS) is promisingly deemed to be one of 6G techniques for extending service coverage, reducing power consumption, and enhancing spectral efficiency. In this article, we have provided some fundamentals of RIS deployment in theory and hardware perspectives as well as utilization of artificial intelligence (AI) and machine learning. We conducted an intelligent deployment of RIS (i-Dris) prototype, including dual-band auto-guided vehicle (AGV) assisted RISs associated with an mmWave base station (BS) and a receiver. The RISs are deployed on the AGV with configured incident/reflection angles. While, both the mmWave BS and receiver are associated with an edge server monitoring downlink packets for obtaining system throughput. We have designed a federated multi-agent reinforcement learning scheme associated with several AGV-RIS agents and sub-agents per AGV-RIS consisting of the deployment of position, height, orientation and elevation angles. The experimental results presented the stationary measurement in different aspects and scenarios. The i-Dris can reach up to 980 Mbps transmission throughput under a bandwidth of 100 MHz with comparably low complexity as well as rapid deployment, which outperforms the other existing works. At last, we highlight some opportunities and future issues in leveraging RIS-empowered wireless communication networks.

eess.SP↗

arXiv2023

CRONOS: Colorization and Contrastive Learning for Device-Free NLoS Human Presence Detection using Wi-Fi CSI

In recent years, the demand for pervasive smart services and applications has increased rapidly. Device-free human detection through sensors or cameras has been widely adopted, but it comes with privacy issues as well as misdetection for motionless people. To address these drawbacks, channel state information (CSI) captured from commercialized Wi-Fi devices provides rich signal features for accurate detection. However, existing systems suffer from inaccurate classification under a non-line-of-sight (NLoS) and stationary scenario, such as when a person is standing still in a room corner. In this work, we propose a system called CRONOS (Colorization and Contrastive Learning Enhanced NLoS Human Presence Detection), which generates dynamic recurrence plots (RPs) and color-coded CSI ratios to distinguish mobile and stationary people from vacancy in a room, respectively. We also incorporate supervised contrastive learning to retrieve substantial representations, where consultation loss is formulated to differentiate the representative distances between dynamic and stationary cases. Furthermore, we propose a self-switched static feature enhanced classifier (S3FEC) to determine the utilization of either RPs or color-coded CSI ratios. Our comprehensive experimental results show that CRONOS outperforms existing systems that either apply machine learning or non-learning based methods, as well as non-CSI based features in open literature. CRONOS achieves the highest human presence detection accuracy in vacancy, mobility, line-of-sight (LoS), and NLoS scenarios.

eess.SP↗

arXiv2023

SALC: Skeleton-Assisted Learning-Based Clustering for Time-Varying Indoor Localization

Wireless indoor localization has attracted significant amount of attention in recent years. Using received signal strength (RSS) obtained from WiFi access points (APs) for establishing fingerprinting database is a widely utilized method in indoor localization. However, the time-variant problem for indoor positioning systems is not well-investigated in existing literature. Compared to conventional static fingerprinting, the dynamicallyreconstructed database can adapt to a highly-changing environment, which achieves sustainability of localization accuracy. To deal with the time-varying issue, we propose a skeleton-assisted learning-based clustering localization (SALC) system, including RSS-oriented map-assisted clustering (ROMAC), cluster-based online database establishment (CODE), and cluster-scaled location estimation (CsLE). The SALC scheme jointly considers similarities from the skeleton-based shortest path (SSP) and the time-varying RSS measurements across the reference points (RPs). ROMAC clusters RPs into different feature sets and therefore selects suitable monitor points (MPs) for enhancing location estimation. Moreover, the CODE algorithm aims for establishing adaptive fingerprint database to alleviate the timevarying problem. Finally, CsLE is adopted to acquire the target position by leveraging the benefits of clustering information and estimated signal variations in order to rescale the weights fromweighted k-nearest neighbors (WkNN) method. Both simulation and experimental results demonstrate that the proposed SALC system can effectively reconstruct the fingerprint database with an enhanced location estimation accuracy, which outperforms the other existing schemes in the open literature.

cs.LG↗

arXiv2023

Federated Deep Reinforcement Learning for THz-Beam Search with Limited CSI

Terahertz (THz) communication with ultra-wide available spectrum is a promising technique that can achieve the stringent requirement of high data rate in the next-generation wireless networks, yet its severe propagation attenuation significantly hinders its implementation in practice. Finding beam directions for a large-scale antenna array to effectively overcome severe propagation attenuation of THz signals is a pressing need. This paper proposes a novel approach of federated deep reinforcement learning (FDRL) to swiftly perform THz-beam search for multiple base stations (BSs) coordinated by an edge server in a cellular network. All the BSs conduct deep deterministic policy gradient (DDPG)-based DRL to obtain THz beamforming policy with limited channel state information (CSI). They update their DDPG models with hidden information in order to mitigate inter-cell interference. We demonstrate that the cell network can achieve higher throughput as more THz CSI and hidden neurons of DDPG are adopted. We also show that FDRL with partial model update is able to nearly achieve the same performance of FDRL with full model update, which indicates an effective means to reduce communication load between the edge server and the BSs by partial model uploading. Moreover, the proposed FDRL outperforms conventional non-learning-based and existing non-FDRL benchmark optimization methods.

cs.AI↗

arXiv2023

CoMP-Enhanced Flexible Functional Split for Mixed Services in Beyond 5G Wireless Networks

With explosively escalating service demands, beyond fifth generation (B5G) aims to realize various requirements for multi-service networks, i.e., higher performance of mixed enhanced mobile broadband (eMBB) and ultra-reliable low-latency communication (URLLC) services than 5G. To flexibly serve diverse traffic, various functional split options (FSOs) are specified by 5G protocols enabling different network functions. In order to improve signal qualities for edge users, we consider FSO-based coordinated multi-point (CoMP) transmission as a prominent technique capable of supporting high traffic demands. However, due to conventional confined hardware processing capability, a processor sharing (PS) model is introduced to deal with high latency for multi-service FSO-based networks. Therefore, it becomes essential to assign CoMP-enhanced functional split modes under PS model. A more tractable FSO-based network in terms of ergodic rate and reliability is derived by stochastic geometry approach. Moreover, we have proposed CoMP-enhanced functional split mode allocation (CFSMA) scheme to adaptively assign FSOs to provide enhanced mixed throughput and latency-aware services. The simulation results have validated analytical derivation and demonstrated that the proposed CFSMA scheme optimizes system spectrum efficiency while guaranteeing stringent latency requirement. The proposed CFSMA scheme with the designed PS FFS-CoMP system outperforms the benchmarks of conventional FCFS scheduling, non-FSO network, fixed FSOs, and limited available FSO selections in open literature.

cs.NI↗

arXiv2023

Edge Selection and Clustering for Federated Learning in Optical Inter-LEO Satellite Constellation

Low-Earth orbit (LEO) satellites have been prosperously deployed for various Earth observation missions due to its capability of collecting a large amount of image or sensor data. However, traditionally, the data training process is performed in the terrestrial cloud server, which leads to a high transmission overhead. With the recent development of LEO, it is more imperative to provide ultra-dense LEO constellation with enhanced on-board computation capability. Benefited from it, we have proposed a collaborative federated learning for low Earth orbit (FELLO). We allocate the entire process on LEOs with low payload inter-satellite transmissions, whilst the low-delay terrestrial gateway server (GS) only takes care for initial signal controlling. The GS initially selects an LEO server, whereas its LEO clients are all determined by clustering mechanism and communication capability through the optical inter-satellite links (ISLs). The re-clustering of changing LEO server will be executed once with low communication quality of FELLO. In the simulations, we have numerically analyzed the proposed FELLO under practical Walker-based LEO constellation configurations along with MNIST training dataset for classification mission. The proposed FELLO outperforms the conventional centralized and distributed architectures with higher classification accuracy as well as comparably lower latency of joint communication and computing.

cs.LG↗

arXiv2023

Reconfigurable Intelligent Surface-Empowered Self-Interference Cancellation for 6G Full-Duplex MIMO Communication Systems

Substantially increasing wireless traffic and extending serving coverage is required with the advent of sixth-generation (6G) wireless communication networks. Reconfigurable intelligent surface (RIS) is widely considered as a promising technique which is capable of improving the system sum rate and energy efficiency. Moreover, full-duplex (FD) multi-input-multi-output (MIMO) transmission provides simultaneous transmit and received signals, which theoretically provides twice of spectrum efficiency. However, the self-interference (SI) in FD system is a challenging task requiring high-overhead cancellation, which can be resolved by configuring appropriate phase shifts of RIS. This paper has proposed an RIS-empowered full-duplex interference cancellation (RFIC) scheme in order to alleviate the severe interference in an RIS-FD system. We consider the interference minimization of RIS-FD MIMO while guaranteeing quality-of-service (QoS) of whole system. The closed-form solution of RIS phase shifts is theoretically derived with the discussion of different numbers of RIS elements and receiving antennas. Simulation results reveal that the proposed RFIC scheme outperforms existing benchmarks with more than 50% of performance gain of sum rate.

cs.IT↗