arXiv subjects

Kalle Åström

Publications and source records attributed to Kalle Åström.

28 records · Page 2Linked to original sources

arXiv2021

Homotopy Continuation for Sensor Networks Self-Calibration

Given a sensor network, TDOA self-calibration aims at simultaneously estimating the positions of receivers and transmitters, and transmitters time offsets. This can be formulated as a system of polynomial equations. Due to the elevated number of unknowns and the nonlinearity of the problem, obtaining an accurate solution efficiently is nontrivial. Previous work has shown that iterative algorithms are sensitive to initialization and little noise can lead to failure in convergence. Hence, research has focused on algebraic techniques. Stable and efficient algebraic solvers have been proposed for some network configurations, but they do not work for smaller networks. In this paper, we use homotopy continuation to solve four previously unsolved configurations in 2D TDOA self-calibration, including a minimal one. As a theoretical contribution, we investigate the number of solutions of the new minimal configuration, showing this is much lower than previous estimates. As a more practical contribution, we also present new subminimal solvers, which can be used to achieve unique accurate solutions in previously unsolvable configurations. We demonstrate our solvers are stable both with clean and noisy data, even without nonlinear refinement afterwards. Moreover, we demonstrate the suitability of homotopy continuation for sensor network calibration problems, opening prospects to new applications.

math.NA↗

arXiv2021

Generic Merging of Structure from Motion Maps with a Low Memory Footprint

With the development of cheap image sensors, the amount of available image data have increased enormously, and the possibility of using crowdsourced collection methods has emerged. This calls for development of ways to handle all these data. In this paper, we present new tools that will enable efficient, flexible and robust map merging. Assuming that separate optimisations have been performed for the individual maps, we show how only relevant data can be stored in a low memory footprint representation. We use these representations to perform map merging so that the algorithm is invariant to the merging order and independent of the choice of coordinate system. The result is a robust algorithm that can be applied to several maps simultaneously. The result of a merge can also be represented with the same type of low-memory footprint format, which enables further merging and updating of the map in a hierarchical way. Furthermore, the method can perform loop closing and also detect changes in the scene between the capture of the different image sequences. Using both simulated and real data - from both a hand held mobile phone and from a drone - we verify the performance of the proposed method.

cs.CV↗

arXiv2021

Trust Your IMU: Consequences of Ignoring the IMU Drift

In this paper, we argue that modern pre-integration methods for inertial measurement units (IMUs) are accurate enough to ignore the drift for short time intervals. This allows us to consider a simplified camera model, which in turn admits further intrinsic calibration. We develop the first-ever solver to jointly solve the relative pose problem with unknown and equal focal length and radial distortion profile while utilizing the IMU data. Furthermore, we show significant speed-up compared to state-of-the-art algorithms, with small or negligible loss in accuracy for partially calibrated setups. The proposed algorithms are tested on both synthetic and real data, where the latter is focused on navigation using unmanned aerial vehicles (UAVs). We evaluate the proposed solvers on different commercially available low-cost UAVs, and demonstrate that the novel assumption on IMU drift is feasible in real-life applications. The extended intrinsic auto-calibration enables us to use distorted input images, making tedious calibration processes obsolete, compared to current state-of-the-art methods.

cs.CV↗

arXiv2020

Sensor Networks TDOA Self-Calibration: 2D Complexity Analysis and Solutions

Given a network of receivers and transmitters, the process of determining their positions from measured pseudoranges is known as network self-calibration. In this paper we consider 2D networks with synchronized receivers but unsynchronized transmitters and the corresponding calibration techniques, known as Time-Difference-Of-Arrival (TDOA) techniques. Despite previous work, TDOA self-calibration is computationally challenging. Iterative algorithms are very sensitive to the initialization, causing convergence issues. In this paper, we present a novel approach, which gives an algebraic solution to two previously unsolved scenarios. We also demonstrate that our solvers produce an excellent initial value for non-linear optimisation algorithms, leading to a full pipeline robust to noise.

eess.SP↗

arXiv2020

In Depth Bayesian Semantic Scene Completion

This work studies Semantic Scene Completion which aims to predict a 3D semantic segmentation of our surroundings, even though some areas are occluded. For this we construct a Bayesian Convolutional Neural Network (BCNN), which is not only able to perform the segmentation, but also predict model uncertainty. This is an important feature not present in standard CNNs. We show on the MNIST dataset that the Bayesian approach performs equal or better to the standard CNN when processing digits unseen in the training phase when looking at accuracy, precision and recall. With the added benefit of having better calibrated scores and the ability to express model uncertainty. We then show results for the Semantic Scene Completion task where a category is introduced at test time on the SUNCG dataset. In this more complex task the Bayesian approach outperforms the standard CNN. Showing better Intersection over Union score and excels in Average Precision and separation scores.

cs.CV↗

arXiv2020

Efficient Real-Time Radial Distortion Correction for UAVs

In this paper we present a novel algorithm for onboard radial distortion correction for unmanned aerial vehicles (UAVs) equipped with an inertial measurement unit (IMU), that runs in real-time. This approach makes calibration procedures redundant, thus allowing for exchange of optics extemporaneously. By utilizing the IMU data, the cameras can be aligned with the gravity direction. This allows us to work with fewer degrees of freedom, and opens up for further intrinsic calibration. We propose a fast and robust minimal solver for simultaneously estimating the focal length, radial distortion profile and motion parameters from homographies. The proposed solver is tested on both synthetic and real data, and perform better or on par with state-of-the-art methods relying on pre-calibration procedures.

cs.CV↗

arXiv2020

Minimal Solvers for Indoor UAV Positioning

In this paper we consider a collection of relative pose problems which arise naturally in applications for visual indoor UAV navigation. We focus on cases where additional information from an onboard IMU is available and thus provides a partial extrinsic calibration through the gravitational vector. The solvers are designed for a partially calibrated camera, for a variety of realistic indoor scenarios, which makes it possible to navigate using images of the ground floor. Current state-of-the-art solvers use more general assumptions, such as using arbitrary planar structures; however, these solvers do not yield adequate reconstructions for real scenes, nor do they perform fast enough to be incorporated in real-time systems. We show that the proposed solvers enjoy better numerical stability, are faster, and require fewer point correspondences, compared to state-of-the-art solvers. These properties are vital components for robust navigation in real-time systems, and we demonstrate on both synthetic and real data that our method outperforms other methods, and yields superior motion estimation.

cs.CV↗

arXiv2019

Massive MIMO-based Localization and Mapping Exploiting Phase Information of Multipath Components

In this paper, we present a robust multipath-based localization and mapping framework that exploits the phases of specular multipath components (MPCs) using a massive multiple-input multiple-output (MIMO) array at the base station. Utilizing the phase information related to the propagation distances of the MPCs enables the possibility of localization with extraordinary accuracy even with limited bandwidth. The specular MPC parameters along with the parameters of the noise and the dense multipath component (DMC) are tracked using an extended Kalman filter (EKF), which enables to preserve the distance-related phase changes of the MPC complex amplitudes. The DMC comprises all non-resolvable MPCs, which occur due to finite measurement aperture. The estimation of the DMC parameters enhances the estimation quality of the specular MPCs and therefore also the quality of localization and mapping. The estimated MPC propagation distances are subsequently used as input to a distance-based localization and mapping algorithm. This algorithm does not need prior knowledge about the surrounding environment and base station position. The performance is demonstrated with real radio-channel measurements using an antenna array with 128 ports at the base station side and a standard cellular signal bandwidth of 40 MHz. The results show that high accuracy localization is possible even with such a low bandwidth.

cs.IT↗

arXiv2018

Beyond Gröbner Bases: Basis Selection for Minimal Solvers

Many computer vision applications require robust estimation of the underlying geometry, in terms of camera motion and 3D structure of the scene. These robust methods often rely on running minimal solvers in a RANSAC framework. In this paper we show how we can make polynomial solvers based on the action matrix method faster, by careful selection of the monomial bases. These monomial bases have traditionally been based on a Gröbner basis for the polynomial ideal. Here we describe how we can enumerate all such bases in an efficient way. We also show that going beyond Gröbner bases leads to more efficient solvers in many cases. We present a novel basis sampling scheme that we evaluate on a number of problems.

cs.CV↗

arXiv2016

An Automatic System for Acoustic Microphone Geometry Calibration based on Minimal Solvers

In this paper, robust detection, tracking and geometry estimation methods are developed and combined into a system for estimating time-difference estimates, microphone localization and sound source movement. No assumptions on the 3D locations of the microphones and sound sources are made. The system is capable of tracking continuously moving sound sources in an reverberant environment. The multi-path components are explicitly tracked and used in the geometry estimation parts. The system is based on matching between pairs of channels using GCC-PHAT. Instead of taking a single maximum at each time instant from each such pair, we select the four strongest local maxima. This produce a set of hypothesis to work with in the subsequent steps, where consistency constraints between the channels and time-continuity constraints are exploited. In the paper it demonstrated how such detections can be used to estimate microphone positions, sound source movement and room geometry. The methods are tested and verified using real data from several reverberant environments. The evaluation demonstrated accuracy in the order of few millimeters.

cs.SD↗