arXiv subjects

Kalyan Radhakrishnan

Publications and source records attributed to Kalyan Radhakrishnan.

25 records · Page 2Linked to original sources

arXiv2020

Development status of the UV-VIS detector system of SOXS for the ESO-NTT telescope

SOXS will be the new spectroscopic facility for the ESO NTT telescope able to cover the optical and NIR bands by using two different arms: the UV-VIS (350-850 nm), and the NIR (800-2000 nm). In this article, we describe the development status of the visible camera cryostat, the architecture of the acquisition system and the progress in the electronic design. The UV-VIS detector system is based on a CCD detector 44-82 from e2v, a custom detector head, coupled with the ESO continuous flow cryostats (CFC), a custom cooling system, based on a Programmable Logic Controller (PLC), and the New General Controller (NGC) developed by ESO. This paper outlines the development status of the system, describes the design of the different parts that make up the UV-VIS arm and is accompanied by a series of information describing the SOXS design solutions in the mechanics and in the electronics parts. The first tests of the detector system with the UV-VIS camera will be shown.

astro-ph.IM↗

arXiv2020

Development status of the SOXS instrument control software

SOXS (Son Of X-Shooter) is a forthcoming instrument for ESO-NTT, mainly dedicated to the spectroscopic study of transient events and is currently starting the AIT (Assembly, Integration, and Test) phase. It foresees a visible spectrograph, a near-Infrared (NIR) spectrograph, and an acquisition camera for light imaging and secondary guiding. The optimal setup and the monitoring of SOXS are carried out with a set of software-controlled motorized components and sensors. The instrument control software (INS) also manages the observation and calibration procedures, as well as maintenance and self-test operations. The architecture of INS, based on the latest release of the VLT Software (VLT2019), has been frozen; the code development is in an advanced state for what concerns supported components and observation procedures, which run in simulation. In this proceeding we present the INS current status, focusing in particular on the ongoing efforts in the support of two non-standard, "special" devices. The first special device is the piezoelectric slit exchanger for the NIR spectrograph; the second special device is the piezoelectric tip-tilt corrector used for active compensation of mechanical flexures of the instrument.

astro-ph.IM↗

arXiv2020

Design and development of the SOXS calibration unit

SOXS is a new spectrograph for the New Technology Telescope (NTT), optimized for transient and variable objects, covering a wide wavelength range from 350 to 2000 nm. SOXS is equipped with a calibration unit that will be used to remove the instrument signatures and to provide wavelength calibration to the data. The calibration unit will employ seven calibration lamps: a quartz-tungsten-halogen and a deuterium lamp for the flat-field correction, a ThAr lamp and four pencil-style rare-gas lamps for the wavelength calibration. The light from the calibration lamps is injected into the spectrograph mimicking the f/11 input beam of the NTT, by using an integrating sphere and a custom doublet. The oversized illumination patch covers the length of the spectrograph slit homogeneously, with $< 1\%$ variation. The optics also supports the second mode of the unit, the star-simulator mode that emulates a point source by utilizing a pinhole mask. Switching between the direct illumination and pinhole modes is performed by a linear stage. A safety interlock switches off the main power when the lamp box cover is removed, preventing accidental UV exposure to the service personnel. All power supplies and control modules are located in an electronic rack at a distance from the telescope platform. In this presentation we describe the optical, mechanical, and electrical designs of the SOXS calibration unit, and report the status of development in which the unit is currently in the test and verification stage.

astro-ph.IM↗

arXiv2020

INGOT WFS for LGSs: First Results from Simulations

The Ingot WFS, a Pyramid-like WFS, has been proposed as a relief to the LGS spot elongation. Actually, the artificial sources are confined in an excited cigar-shaped region in the sodium layer and portions of the telescope aperture have a corresponding different perspective. This diversity generates a variation of the WFS response depending on the illuminated sub-aperture position. The feasibility study of the INGOT WFS is developing within the MAORY project. In this work we present the numerical simulator built in order to investigate the performance of the IngotWFS in terms of Strehl Ratio, obtained reconstructing the incoming turbulent wavefront with a modal approach, in a closed-loop fashion. We also discuss the assumptions and tests we made in order to explore the range of parameters that play key roles in the game. Finally, we report on the overall results of the simulations of the performance expected by the Ingot WFS, under different conditions and input aberrations, with the aim to also compare the measured AO loop residuals with the Shack-Hartmann WFS ones, obtained working under the same assumptions.

astro-ph.IM↗

arXiv2020

Pupil plane wavefront sensing for extended and 3D sources

The basic outline of a pupil plane WaveFront Sensor is reviewed taking into account that the source to be sensed could be different from an unresolved source, i.e. it is extended, and that it could deploy also in a 3D fashion, enough to exceed the field's depth of the observing telescope. Under these conditions it is pointed out that the features of the reference are not invariant for different position on the pupil and it is shown that the INGOT WFS is the equivalent of the Pyramid for a Laser Guide Star. Under these conditions one can imagine to use a Dark WFS approach to improve the SNR of such a WFS, or to use a corrected upward beam in order to achieve a better use of the LGS photons with respect to an ideal Shack-Hartmann WFS.

astro-ph.IM↗

arXiv2020

INGOT Wavefront Sensor: Simulation of Pupil Images

The ingot wavefront sensor (I-WFS) has been proposed, for ELT-like apertures, as a possible pupil plane WFS, to cope with the geometrical characteristics of a laser guide star (LGS). Within the study and development of such a WFS, on-going in the framework of the MAORY project, the final purpose of the I-WFS simulation is to estimate its performance in terms of wavefront aberration measurement capability. The first step of this analysis is to translate incoming wavefronts into the three pupil images, produced by the optical system. The intrinsic geometrical characteristics of the ingot optical element, designed to be coupled with the LGS elongated image, make the system conceptually different with respect to other pupil WFSs (like the Pyramid WFS, P-WFS) also in terms of the simulation technique to be selected, within the ones which can be found in literature. In this paper, we aim to report the considerations and derivations which led to the selection of a ray-tracing method for ingot pupil images simulation, and the geometrical assumptions and approach made to optimize the computing time.

astro-ph.IM↗

arXiv2014

Pathfinder first light: alignment, calibration, and commissioning of the LINC-NIRVANA ground-layer adaptive optics subsystem

We present descriptions of the alignment and calibration tests of the Pathfinder, which achieved first light during our 2013 commissioning campaign at the LBT. The full LINC-NIRVANA instrument is a Fizeau interferometric imager with fringe tracking and 2-layer natural guide star multi-conjugate adaptive optics (MCAO) systems on each eye of the LBT. The MCAO correction for each side is achieved using a ground layer wavefront sensor that drives the LBT adaptive secondary mirror and a mid-high layer wavefront sensor that drives a Xinetics 349 actuator DM conjugated to an altitude of 7.1 km. When the LINC-NIRVANA MCAO system is commissioned, it will be one of only two such systems on an 8-meter telescope and the only such system in the northern hemisphere. In order to mitigate risk, we take a modular approach to commissioning by decoupling and testing the LINC-NIRVANA subsystems individually. The Pathfinder is the ground-layer wavefront sensor for the DX eye of the LBT. It uses 12 pyramid wavefront sensors to optically co-add light from natural guide stars in order to make four pupil images that sense ground layer turbulence. Pathfinder is now the first LINC-NIRVANA subsystem to be fully integrated with the telescope and commissioned on sky. Our 2013 commissioning campaign consisted of 7 runs at the LBT with the tasks of assembly, integration and communication with the LBT telescope control system, alignment to the telescope optical axis, off-sky closed loop AO calibration, and finally closed loop on-sky AO. We present the programmatics of this campaign, along with the novel designs of our alignment scheme and our off-sky calibration test, which lead to the Pathfinder's first on-sky closed loop images.

astro-ph.IM↗