arXiv subjects

Kannan Lu

Publications and source records attributed to Kannan Lu.

9 recordsLinked to original sources

arXiv2026

Unified Flux Control Architecture for Fluxonium Qubits

Control architectures that reduce hardware overhead while maintaining high-fidelity operations are essential for the continued scaling of superconducting quantum processors. Here we experimentally realize a unified control architecture for fluxonium qubits, in which both transverse ($XY$) and longitudinal ($Z$) operations are implemented through a single flux-control channel driven by a single arbitrary waveform generator channel. This architecture imposes competing requirements on the shared control channel, which must simultaneously support low-frequency flux transmission for reset operations while strongly attenuating broadband noise near the qubit transition frequency. We address this challenge through frequency-selective cryogenic filtering together with compensated waveform synthesis that corrects the pulse distortion introduced by the filtered control line. Experimentally, this approach preserves coherence times above 100 $\mu$s while enabling active reset with approximately 98% fidelity and 20-ns single-qubit gates with fidelities exceeding 99.99%. We further demonstrate FPGA-native instruction-level waveform synthesis based on reusable pulse primitives for unified flux control. These results establish unified flux control as a scalable architecture for fluxonium qubits that reduces control hardware overhead while preserving high-fidelity operation.

quant-ph↗

arXiv2026

Millikelvin digital-to-analog converter for superconducting quantum processors

Scaling superconducting quantum processors is increasingly constrained by the wiring, heat load, and calibration overhead associated with delivering high-resolution analog signals from room temperature to qubits at millikelvin temperature. Here we demonstrate a superconducting digital-to-analog converter (DAC) integrated with high-coherence fluxonium qubits in a multi-chip module architecture. The DACs generate persistent analog flux signals for tuning qubit parameters and are programmed deterministically using single-flux-quantum (SFQ) pulses, providing a digital interface compatible with established SFQ routing and demultiplexing technologies. Operating at millikelvin temperature, the DACs enable in-situ tuning of fluxonium qubits without measurable degradation of qubit coherence. The presented device provides a static control primitive for flux-tunable qubits, enabling parameter homogenization and eliminating the need for individual room-temperature DC bias lines. These results establish SFQ-programmable millikelvin DACs as a building block for digitally controlled superconducting quantum processors.

quant-ph↗

arXiv2026

Scalable Fluxonium Quantum Processors via Tunable-Coupler Architecture

Superconducting quantum processors have largely converged on transmon-based architectures, while alternative qubit modalities with intrinsic error protection have lacked a demonstrated path to scalable system integration. In particular, although tunable-coupler-mediated interactions have been validated for small fluxonium systems, it remains unclear whether such designs can be scaled to a multi-qubit lattice. Here, we establish a scalable fluxonium processor architecture based on a modular qubit-coupler unit cell engineered to suppress residual interactions and spectator errors in a many-qubit lattice. The system enables parallel single-qubit gate fidelities approaching 99.99% and two-qubit CZ gate fidelities around 99%. With an optimized gate duration of 32 ns, the best CZ gate fidelity reaches 99.9%. We further validate this architecture in a 22-qubit processor based on the same configuration, where parallel operations enable the deterministic generation of Greenberger-Horne-Zeilinger states involving up to 10 qubits. Together, these results demonstrate that the fluxonium-tunable-coupler unit cell composes without emergent interaction pathologies and establish fluxonium as a scalable superconducting qubit platform.

quant-ph↗

arXiv2025

Observation of a Zero-Field Josephson Diode Effect in a Helimagnet Josephson Junction

We present Josephson junctions with the metallic chiral helimagnet Cr$_{1/3}$NbS$_{2}$ as the weak link that exhibit magnetic diffraction patterns with asymmetry in both applied magnetic field and the critical (switching) current. The nonreciprocity between positive and negative critical currents (the Josephson diode effect) reaches efficiencies of $|\eta|>20\%$, where $\eta \equiv (I_{c+}-|I_{c-}|)/(I_{c+}+|I_{c-}|)$, and the effect persists even at zero applied field. As a chiral helimagnet, Cr$_{1/3}$NbS$_{2}$ lacks inversion symmetry and time reversal symmetry, providing a platform to explore the interplay of superconductivity with both symmetries broken. We propose that pinned Abrikosov vortices are a primary mechanism for the asymmetric magnetic-field response, while the nonzero spin chirality of Cr$_{1/3}$NbS$_{2}$ gives rise to the diode effect. Simulations of magnetic diffraction patterns with vortices show offsets from zero field consistent with observations, while simulations of chiral spin structures with out-of-plane canting show a diode effect.

cond-mat.supr-con↗

arXiv2025

Identify and Quantify Various Dissipation Mechanisms of Josephson Junction in Superconducting Circuits

Pinpointing the dissipation mechanisms and evaluating their impacts to the performance of Josephson junction (JJ) are crucial for its application in superconducting circuits. In this work, we demonstrate the junction-embedded resonator (JER) as a platform which enables us to identify and quantify various dissipation mechanisms of JJ. JER is constructed by embedding JJ in the middle of an open-circuit, 1/2 {\lambda} transmission-line resonator. When the 1st and 2nd harmonics of JER are excited, JJ experiences different boundary conditions, and is dominated by internal and external dissipations, respectively. We systematically study these 2 dissipation mechanisms of JJ by varying the JJ area and number. Our results unveil the completely different behaviors of these 2 dissipation mechanisms, and quantitatively characterize their contributions, shedding a light on the direction of JJ optimization in various applications.

quant-ph↗

arXiv2024

High coherence fluxonium manufactured with a wafer-scale uniformity process

Fluxonium qubits are recognized for their high coherence times and high operation fidelities, attributed to their unique design incorporating a superinductor, which is typically implemented using an array of over 100 Josephson junctions. However, this complexity poses significant fabrication challenges, particularly in achieving high yield and junction uniformity with traditional methods. Here, we introduce an overlap process for Josephson junction fabrication that achieves nearly 100% yield and maintains uniformity across a 2-inch wafer with less than 5% variation for the phase slip junction and less than 2% for the entire junction array. We use a compact junction array design that achieves state-of-the-art dielectric loss tangents and flux noise levels, as confirmed by multiple devices. This enables fluxonium qubits to reach energy relaxation times exceeding 1 millisecond at the flux frustration point. This work paves the way for scalable high coherence fluxonium processors using CMOS-compatible processes, marking a significant step towards practical quantum computing.

quant-ph↗

arXiv2023

Native approach to controlled-Z gates in inductively coupled fluxonium qubits

The fluxonium qubits have emerged as a promising platform for gate-based quantum information processing. However, their extraordinary protection against charge fluctuations comes at a cost: when coupled capacitively, the qubit-qubit interactions are restricted to XX-interactions. Consequently, effective XX- or XZ-interactions are only constructed either by temporarily populating higher-energy states, or by exploiting perturbative effects under microwave driving. Instead, we propose and demonstrate an inductive coupling scheme, which offers a wide selection of native qubit-qubit interactions for fluxonium. In particular, we leverage a built-in, flux-controlled ZZ-interaction to perform qubit entanglement. To combat the increased flux-noise-induced dephasing away from the flux-insensitive position, we use a continuous version of the dynamical decoupling scheme to perform noise filtering. Combining these, we demonstrate a 20 ns controlled-Z (CZ) gate with a mean fidelity of 99.53%. More than confirming the efficacy of our gate scheme, this high-fidelity result also reveals a promising but rarely explored parameter space uniquely suitable for gate operations between fluxonium qubits.

quant-ph↗

arXiv2020

Canted antiferromagnetic order in the monoaxial chiral magnets V$_{1/3}$TaS$_2$ and V$_{1/3}$NbS$_{2}$

The Dzyaloshinskii-Moriya (DM) interaction is present in the transition metal dichalcogenides (TMDC) magnets of form $M_{1/3}T$S$_{2}$ ($M$ $=$ 3d transition metal, $T$ $\in$ {Nb, Ta}), given that the intercalants $M$ form $\sqrt{3}\times\sqrt{3}$ superlattices within the structure of the parent materials $T$S$_2$ and break the centrosymmetry. Competition between the DM and ferromagnetic exchange interactions in these systems has been shown to stabilize a topological defect known as a chiral soliton in select intercalated TMDCs, initiating interest both in terms of fundamental physics and the potential for technological applications. In the current article, we report on our study of the materials V$_{1/3}$TaS$_2$ and V$_{1/3}$NbS$_2$, using a combination of x-ray powder diffraction, magnetization and single crystal neutron diffraction. Historically identified as ferromagnets, our diffraction results instead reveal that vanadium spins in these compounds are arranged into an A-type antiferromagnetic configuration at low temperatures. Refined moments are 1.37(6)$μ_{B}$ and 1.50(9)$μ_{B}$ for V$_{1/3}$TaS$_2$ and V$_{1/3}$NbS$_2$, respectively. Transition temperatures $T_{c}$~$=$~32K for V$_{1/3}$TaS$_{2}$ and 50K for V$_{1/3}$NbS$_{2}$ are obtained from the magnetization and neutron diffraction results. We attribute the small net magnetization observed in the low-temperature phases to a subtle ($\sim$2$^{\circ}$) canting of XY-spins in the out-of-plane direction. These new results are indicative of dominant antiferromagnetic exchange interactions between the vanadium moments in adjacent ab-planes, likely eliminating the possibility of identifying stable chiral solitons in the current materials.

cond-mat.mtrl-sci↗

arXiv2020

A comparison of computed and experimental neutron diffraction intensity at large momentum for MnO and NiO

Magnetic neutron scattering measures spin-spin correlations giving information about the long-range spin order as well as the shape of the spin density in magnetic materials. Similarly, detailed first principles calculations directly compute the spin density in materials. In this work, the authors carefully compare experimentally measured magnetic neutron intensities to three levels of theory: density functional theory in two approximations, and fixed-node diffusion Monte Carlo. While each theory performs similarly for the simple antiferromagnet MnO, there are significant differences between density functional theory and diffusion Monte Carlo in NiO. For both materials, fixed-node diffusion Monte Carlo shows the lowest RMS error with respect to experiment for the form factor and the intensity. Through connection of the intensities and form factors to the real-space spin densities, it is shown that diffusion Monte Carlo spin density becomes more diffuse by spreading spin away from the bond directions. This benchmark is of importance when considering the efficacy of an ab initio calculation in capturing both the long-range magnetic correlations and the microscopic spin details of magnetic systems.

cond-mat.mtrl-sci↗