arXiv subjects

Karen A. Meyer

Publications and source records attributed to Karen A. Meyer.

6 recordsLinked to original sources

arXiv2026

Calculation of Field Line Slippage Rates in Coronal Simulations

We present the Universal Slippage calculator (\texttt{USlip}), an extension of the Universal Fieldline Tracer (\texttt{UFiT}), that computes magnetic field line slippage rates from an input magnetic field defined on a structured grid. The slippage rate provides a local, physically grounded diagnostic of non-ideal evolution, directly quantifying departures from ideal frozen-in motion. We outline the theoretical formulation and describe an efficient numerical implementation. The method is validated against analytical solutions and applied to simulations using three coronal codes treating varying spatial scales, all of which are standard inputs for \texttt{USlip}. In all the examples considered, the slippage rate not only identifies where magnetic connectivity changes occur, but also accurately reproduces the observed direction of field-line slippage. The consistency of the results across analytical tests and multiple simulation platforms demonstrates that \texttt{USlip} is a robust and versatile tool for diagnosing three-dimensional reconnection in dynamically evolving systems.

astro-ph.SR↗

arXiv2023

Defining the Middle Corona

The middle corona, the region roughly spanning heliocentric altitudes from $1.5$ to $6\,R_\odot$, encompasses almost all of the influential physical transitions and processes that govern the behavior of coronal outflow into the heliosphere. Eruptions that could disrupt the near-Earth environment propagate through it. Importantly, it modulates inflow from above that can drive dynamic changes at lower heights in the inner corona. Consequently, this region is essential for comprehensively connecting the corona to the heliosphere and for developing corresponding global models. Nonetheless, because it is challenging to observe, the middle corona has been poorly studied by major solar remote sensing missions and instruments, extending back to the Solar and Heliospheric Observatory (SoHO) era. Thanks to recent advances in instrumentation, observational processing techniques, and a realization of the importance of the region, interest in the middle corona has increased. Although the region cannot be intrinsically separated from other regions of the solar atmosphere, there has emerged a need to define the region in terms of its location and extension in the solar atmosphere, its composition, the physical transitions it covers, and the underlying physics believed to be encapsulated by the region. This paper aims to define the middle corona and give an overview of the processes that occur there.

astro-ph.SR↗

arXiv2022

A Statistical Comparison of EUV Brightenings Observed by SO/EUI with Simulated Brightenings in Non-potential Simulations

The High Resolution Imager (HRI_EUV) telescope of the Extreme Ultraviolet Imager (EUI) instrument onboard Solar Orbiter has observed EUV brightenings, so-called campfires, as fine-scale structures at coronal temperatures. The goal of this paper is to compare the basic geometrical (size, orientation) and physical (intensity, lifetime) properties of the EUV brightenings with regions of energy dissipation in a non-potential coronal magnetic field simulation. In the simulation, HMI line-of-sight magnetograms are used as input to drive the evolution of solar coronal magnetic fields and energy dissipation. We applied an automatic EUV brightening detection method to EUV images obtained on 30 May 2020 by the HRI_EUV telescope. We applied the same detection method to the simulated energy dissipation maps from the non-potential simulation to detect simulated brightenings. We detected EUV brightenings with density of 1.41x10^{-3} brightenings/Mm^2 in the EUI observations and simulated brightenings between 2.76x10^{-2} - 4.14x10^{-2} brightenings/Mm^2 in the simulation, for the same time range. Although significantly more brightenings were produced in the simulations, the results show similar distributions of the key geometrical and physical properties of the observed and simulated brightenings. We conclude that the non-potential simulation can successfully reproduce statistically the characteristic properties of the EUV brightenings (typically with more than 85% similarity); only the duration of the events is significantly different between observations and simulation. Further investigations based on high-cadence and high-resolution magnetograms from Solar Orbiter are under consideration to improve the agreement between observation and simulation.

astro-ph.SR↗

arXiv2020

Investigation of the Middle Corona with SWAP and a Data-Driven Non-Potential Coronal Magnetic Field Model

The large field-of-view of the Sun Watcher using Active Pixel System detector and Image Processing (SWAP) instrument on board the PRoject for Onboard Autonomy 2 (PROBA2) spacecraft provides a unique opportunity to study extended coronal structures observed in EUV in conjunction with global coronal magnetic field simulations. A global non-potential magnetic field model is used to simulate the evolution of the global corona from 1 September 2014 to 31 March 2015, driven by newly emerging bipolar active regions determined from Helioseismic and Magnetic Imager (HMI) magnetograms. We compare the large-scale structure of the simulated magnetic field with structures seen off-limb in SWAP EUV observations. In particular, we investigate how successful the model is in reproducing regions of closed and open structures; the scale of structures; and compare the evolution of a coronal fan observed over several rotations. The model is found to accurately reproduce observed large-scale off-limb structures. When discrepancies do arise they mainly occur off the east solar limb due to active regions emerging on the far side of the Sun, which cannot be incorporated into the model until they are observed on the Earth-facing side. When such ``late'' active region emergences are incorporated into the model, we find that the simulated corona self-corrects within a few days, so that simulated structures off the west limb more closely match what is observed. Where the model is less successful, we consider how this may be addressed, through model developments or additional observational products.

astro-ph.SR↗

arXiv2020

The effect of internal gravity waves on cloud evolution in sub-stellar atmospheres

Sub-stellar objects exhibit photometric variability, which is believed to be caused by a number of processes, such as magnetically-driven spots or inhomogeneous cloud coverage. Recent models have shown that turbulent flows and waves, including internal gravity waves, may play an important role in cloud evolution. The aim of this paper is to investigate the effect of IGW on dust nucleation and dust growth, and whether observations of the resulting cloud structures could be used to recover atmospheric density information. For a simplified atmosphere in two dimensions, we numerically solved the governing fluid equations to simulate the effect on dust nucleation and mantle growth as a result of the passage of an IGW. Furthermore, we derived an expression that relates the properties of the wave-induced cloud structures to observable parameters in order to deduce the atmospheric density. Numerical simulations show that the $ρ, p, T$ variations caused by gravity waves lead to an increase of the nucleation rate by up to a factor 20, and an increase of the mantle growth rate by up to a factor 1.6, compared to their equilibrium values. An exploration of the wider parameter space shows that in absolute terms, the increase in nucleation due to IGW is stronger in cooler (T dwarfs) and TiO2-rich sub-stellar atmospheres. The relative increase, however, is greater in warmer (L dwarf) and TiO2-poor atmospheres due to conditions less suited for efficient nucleation at equilibrium. These variations lead to banded areas in which dust formation is much more pronounced, similar to the cloud structures observed on Earth. We show that IGW in the atmosphere of sub-stellar objects can produce banded clouds structures similar to that observed on Earth. We propose a method with which potential observations of banded clouds could be used to estimate the atmospheric density of sub-stellar objects.

astro-ph.SR↗

arXiv2011

Solar Magnetic Carpet I: Simulation of Synthetic Magnetograms

This paper describes a new 2D model for the photospheric evolution of the magnetic carpet. It is the first in a series of papers working towards constructing a realistic 3D non-potential model for the interaction of small-scale solar magnetic fields. In the model, the basic evolution of the magnetic elements is governed by a supergranular flow profile. In addition, magnetic elements may evolve through the processes of emergence, cancellation, coalescence and fragmentation. Model parameters for the emergence of bipoles are based upon the results of observational studies. Using this model, several simulations are considered, where the range of flux with which bipoles may emerge is varied. In all cases the model quickly reaches a steady state where the rates of emergence and cancellation balance. Analysis of the resulting magnetic field shows that we reproduce observed quantities such as the flux distribution, mean field, cancellation rates, photospheric recycle time and a magnetic network. As expected, the simulation matches observations more closely when a larger, and consequently more realistic, range of emerging flux values is allowed (4e16 - 1e19 Mx). The model best reproduces the current observed properties of the magnetic carpet when we take the minimum absolute flux for emerging bipoles to be 4e16 Mx. In future, this 2D model will be used as an evolving photospheric boundary condition for 3D non-potential modeling.

astro-ph.SR↗